Work protect mode enabled - but giving javascript issue in IE8

Hi Experts,
We need help on work protect mode issue. we enabled the work protect mode.
When there is unsaved data and moving from existing page to other role, we are getting script error in IE 8 version. But for earlier versions(IE7) , it is working perfectly.
It looks like some issue in the browser or some patch needs to installed for resloving this issue.
can anyone help me in this regard. Thank you.
Thanks & Regards,
Raghavendranath G

Hi,
The alternative way is....you can open the page using the compaitbility view..(You should be able to see the compatibility option in the address bar) This will prompt you to reload the page.
Regards,
Narendra

Similar Messages

Issue with Work Protect Mode

Dear All,
I am using SAP EP 6.0 SP21.I have enabled the work protect mode.
Problem:I am in JSP page , I am trying to navigate to top level tab by selecting the option "Open in new Window" its navigating fine. I am closing the new window again from parent window i am trying to open 2nd lavel tab,instead of opening the 2nd level tab its openings the again top level tab, which i was slected before.
But if i am navgating to top level then its working fine , it also works fine while navigating only in 2nd level.
Only problem is after navigating from top level ,again navigating to 2nd level its not working.
Please suggest,
Thanks & Regards
Manoj Sahoo

It solved by upgrading the support pack.
Regards
Manoj SAhoo

Enable Work-Protect-Mode in BEx-WEb

Hello,
I am using integrated planning in the SAP EP 6.
Every time someone clicks on the portal navigation all changes get lost, unless the planning app was saved before.
Is there a way in Bex Web to activate the dirty-flag and the work protected mode? This way the Portal itsself would recoginze changed data and prevent the loss of data.
regards,
Michael Kulhanek

Hello Michael,
just check the OSS 0734861.
enter value "3" for workprotect.mode.default. perhaps this will help.
best regards,
michael

Work Protect Mode for IAC/BSP iViews

Does anyone know how I can enable Work Protect Mode for BSP or IAC iViews in the portal?
It works correctly as per the desired mode level for WDP iViews, but when a user makes changes on a form on a BSP/IAC and navigates away from the page, no pop-up appears.
Is some JavaScript required in the BSP to set the page as "dirty" or to subscribe to the Work Protect event handler in the portal, or is there a simpler way to enable this or a similar feature?
Thanks,
Tom

Hello friends,
I have same issue.. I have applied Work Protect Mode to 3.. but it doesn't work for IAC iViews.
Is your issue resolved by any mean..
I cant apply Java script code on every back-end application...
the issue again... is this doesn't come when user directly logs in through ITS. over there user gets the alert. but only when user moves from Portal the work protect mode doesn't.
It became very urgent issue.
I appreciate any help..
Regards
pankhuri

Reader X crashes after 30 secs with Protected mode enabled

Having just deployed Reader X to over 100 PC's via group policy I'm a little dishartened to find that Reader X crashes after 30 secs of being open when protected mode is enabled.
Current setup is as followed:-
Clients are XP SP3, Vista SP2 & Win7 (all crash)
Server 2003 R2 domain
Reader X deployed via MSI using GPO with a transform created using the Reader X customization wizard (only set to disable updates as I'll push these out via GPO also when available).
The problem occurs with standard domain users (doesn't happen if you use an admin account to login and run Reader X), once you disable the setting for "enable Protected mode at start up" and restart Reader X it doesn't crash. I've been reading also that the protected mode creats a sandbox environment that some AV products are currently having issues with, so I've also tested by removing my AV on a test client rebooting and running Reader X with protected mode enabled, the Pc will still crash, so that rules out my AV product.
After each crash the client logs an event in the application log
Event ID: 1000
Aource Application error
Description:
Faulting application AcroRd32.exe, version 10.0.0.396, time stamp 0x4cc5e97b, faulting module WININET.dll, version 8.0.6001.18999, time stamp 0x4ccfa98f, exception code 0xc0000005, fault offset 0x0002387b, process id 0xd54, application start time 0x01cbc2ec89ab4cba.
Anyone any ideas on why this happens?

I am seeing the same problem on Vista SP2 32-bit. I enabled the Protect Mode log and see a bunch of errors relating to registry entries. I am running Adobe Reader X 10.0.1 as a standard privilege user. The problem has been intermittent. Repeated attempts to open the same PDF will result in Adobe Reader X failing after 45 seconds, then the next attempt will work fine. I have had situations where an Adobe Reader X instance has been open for hours but a new instance crashed. I have not been able to identify any trigger that might explain the difference in behavior. The problem has gone away since disabling Protect Mode.
>>>
[05:31/19:10:43] Adobe Reader Protected Mode Logging Initiated
[05:31/19:10:43] NtCreateKey: STATUS_ACCESS_DENIED
[05:31/19:10:43] real path: \REGISTRY\MACHINE\Software\Adobe
[05:31/19:10:43] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[05:31/19:10:43] NtCreateKey: STATUS_ACCESS_DENIED
[05:31/19:10:43] real path: \REGISTRY\MACHINE\SOFTWARE\Adobe
[05:31/19:10:43] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[05:31/19:10:44] OpenEvent: STATUS_ACCESS_DENIED
[05:31/19:10:44] name: MSFT.VSA.COM.DISABLE.5900
[05:31/19:10:44] Consider modifying policy using these policy rules: EVENTS_ALLOW_ANY
[05:31/19:10:44] OpenEvent: STATUS_ACCESS_DENIED
[05:31/19:10:44] name: MSFT.VSA.IEC.STATUS.6c736db0
[05:31/19:10:44] Consider modifying policy using these policy rules: EVENTS_ALLOW_ANY

Work Protect Mode Pop up

Hi,
I would like to get the source for the Work Protect Mode pop up that we see in the portal.
Can anyone point out where can I get the actual source code?
Regards
J

Hi Kai,
Thank you for the response...
I am not sure of the location of the text you suggested, but I found that
text is maintained in CL_FPM_CONFIRMATION_REQUEST abap class. this text is divided in to two text 1) This application contains unsaved data which may be lost. and 2) Do you want to continue without saving the changes? And append this is the class constructor.
We can change the text here... But thought changing the text is not a solution for my issue, so I need to address the root cause....
I contacted SAP (raised an OSS message) and working with them on this, as of now we modified our logic in Value Determination BADI and it is working fine 90%
Update: modified Value determination BAdi and V_T77SP_2 table entry to solve this issue!
Thanks,
Pradeep

Work Protect mode and browser navigation?

Through testing we have noticed some behaviors with Work Protect that I did not expect. Can anyone help?
We are on EP6 SP18. When changing data (ie. setting the dirty flag) on applications (CRM PCUI for instance) and then clicking some other link, button, etc. anywhere within the browser content area, the Work Protect mode fires correctly and pops up a confirmation warning.
However, in these cases:
(1)user clicks forward/backward browser buttons
(2)user manually enters URL in address bar
(3)user close browser
(4)user clicks mouse buttons for backward/foward navigation (such as 3rd or 4th mouse button programmed to do back/forward)
...Work Protect does NOT fire and catch those events.
Is this truly a limitation of Work Protect or should we investigate further? I can not find any definate wording of the above issues/limitations in any of the documentation (help.sap.com or on service.sap.com in notes).

Hi
In webdynpro java we have the class like WDPortalWorkProtectMode. But I could not be able get that in ABAP. Can you please help me by providing the name of the Class.
Regards,
Srikanth.

Work Protect Mode for transactional iView...

Hi Experts,
Please help me to understand significance and features of Work Protect mode in portal.
How to implement it.
But main point is, is it possible to implement Work Protect Mode in Transactional iViews, i.e. let say we have created one transactional iView for SU01 tcode, which opens in New Window.
Now if I directly close that window then ideally one popup should come telling the data is not saved.
Also let me know if there is any other way to achieve my requirement.
Appreciate for help.
Regards,
Ravi

Hi Ravi,
Thanks for your response.
Kindly suggest what vaue we should give in this property "workprotect.mode.default".
I was going through one link : [http://help.sap.com/saphelp_erp2004/helpdata/en/37/50fb5066f9db43b3b5d5fc8de0c051/content.htm]
Also are you sure this setting will enable WorkProtectMode for Transactional iView as well.
Regards,
Ravi

FPM and Work Protect Mode

Hi Gurus,
Need your help with an issue I am facing.
I need to implement Work Protection in a custom ESS appl. I read in the forum/ help that FPM itself manages WorkProtection/ Confirm Loss-of-Work for ESS applications.
However, It doesn't prompt for 'saving' data in my case. I am not able to figure out a way to incorporate it?
Any idea how to implement it? I did go through the FPMComponent in xsfpm dc. But, am not sure how to implement it in my application.
Thanks in advance.
Anjana R.

Hi Ayyapparaj, Thanks.
I am on NW04 SP 21. And Work Protect Mode works on the standard ESS applications.
I am not sure how to implement work protection in my application or how to trigger the Standard Work Protect confirmation dialog window.
I created a custom Confirmation window, but the client wants it to be consistent with the standard Work Protect Pop Up.
I did set the isDirty to true and turned on the "Prompt to save work" option on Portal. But, still doesnt work.
Could you please help me with this?
Anjana R.
Edited by: Anjana Raghav on Dec 20, 2007 7:42 AM

Work Protect Mode on WebTemplates

Hi folks,
I'd like to use the Work Protect Mode using set_dirty method, but i didn't find help or instructions to implement it in a WebApplicationDesigner (WAD) WebTemplate correctly.
E.g. i will get the errors EPCM or WDPortalWorkProtectMode is undefined if i implement it using JavaScript.
Is there any help outside?

Okay, other question: How do i get access to object EPCM using JavaScript?

Allow printing with protected mode enabled

Hi!
I distributed Adobe Reader XI within a GPO and I have a lot of users asking for remove the warning when they want to print the document.
With the protected mode enabled they should press the "activate all" button each time they want to print.
I know the protected mode it's for more security but this kind of bugging messages will force users to disable the "protected mode" to bypass the bugging messages, not regarding to the security issues below this.

Ok, I understand.
It seems there it's a bug in the spanish translation of Reader, because in the Enhaced Security zone it says protected mode instead of protected view on the three radios (All files, files from potentially unsafe .., Off)
Check this image:
I will look where to send this bug to Adobe.
Regards,

Clear flag of Work Protect Mode

Hi there,
I'm using work protect mode functionality in my WD ABAP application. The problem I'm facing at the moment is that I would like to clear this flag explicitly before I trigger a navigation. The scenario looks as follows:
1. I change data on my OIF screen.
2. I press a button to navigate to an OCI catalogue and suspend the current WD application. (Navigation is done inplace)
3. Some data has been chosen and the navigation back to the WD application (resume) is done --> Application is set to dirty
4. Now I want to navigate to the OCI catalogue again. Before navigation is done, the dirty flag is set to false explicitly.
Even though the dirty flag is set to false, the work protect mode is doing his job and opens the OCI catalogue in a new window, which is intended be displayed inplace. Now to my question:
Is there a way how I can clear the Work Protect Mode or set it to false explicitly?
Kind regards,
Albert

Not sure if it will solve your particular problem, but have you tried setting the Work Protect Mode to APPLICATION_ONLY?
More info here: http://help.sap.com/saphelp_nw70/helpdata/EN/45/b76f4169e25858e10000000a1550b0/frameset.htm

Work Protect Mode

Hi All,
I have a requirement to display the work protect mode pop up when the user clicked on the log off link or user directly closes the window.
Do any of you can confirms if this can be achieved by any means.
Thanks in advance.
Best Regards,
Sash.

Hi Sash,
It can be achieved, but it will require some custom development.
What you need to do is trigger the popup from the logoff link (before the logoff popup I guess) and from the body onunload event.
The logoff link is inside the masthead, you can add a script there and call it before the logoff script is called.
Body onunload is a little bit trickier, because you don't have access to the body tag... But what should work is add a script that changes the body onunload function. You could place this script also in the masthead.
          function addUnloadEvent(func) {
            var oldonunload = window.onunload;
            if (typeof window.onunload != 'function') {
              window.onunload = func;
            } else {
              window.onunload = function() {
                if (oldonunload) {
                  oldonunload();
                func();
The function you need to create would be something like this:
          function workprotectPopup() {
               if (EPCM.getDirty()) {
                    EPCM.popupOnUnsavedData();
You can then add it to the onunload by using:
          addUnloadEvent(workprotectPopup);
Regards,
Johan

Work protect mode and wedynpro ABAP

Hi,
Does anyone know how the work protect mode should work for webdynpro abap?
We are using webdynpro abap ivews for travel. When i click on the exit button within travel I get a pop up. If I navigate away i.e click on personal information I don't get a pop up.
When I navigate away form a webdynpro java iview to personal information I always get a pop up.
Shouldn't this happen for webdynpro ABAP ivews as well?

Hi
In webdynpro java we have the class like WDPortalWorkProtectMode. But I could not be able get that in ABAP. Can you please help me by providing the name of the Class.
Regards,
Srikanth.

Portal Work Protect mode is not working properly after upgrade to NW 7.4

The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data")
When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup.
Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window.
This was working fine before upgrade to SAP NW 7.4 SP 5.
Please let me know if anyone have faced this issue before or have an resolution.
Thank you.

Hi Sundar & Rakesh
I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
** Scenario Summary **
The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
http://scn.sap.com/docs/DOC-2513
What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
Work Protect Mode
http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
Lastly have you attempted to change the property value and restarting the service ?
Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer.

Work protect mode enabled - but giving javascript issue in IE8

Similar Messages

Maybe you are looking for