Work Protect Mode for IAC/BSP iViews

Does anyone know how I can enable Work Protect Mode for BSP or IAC iViews in the portal?
It works correctly as per the desired mode level for WDP iViews, but when a user makes changes on a form on a BSP/IAC and navigates away from the page, no pop-up appears.
Is some JavaScript required in the BSP to set the page as "dirty" or to subscribe to the Work Protect event handler in the portal, or is there a simpler way to enable this or a similar feature?
Thanks,
  Tom

Hello friends,
I have same issue.. I have applied Work Protect Mode to 3.. but it doesn't work for IAC iViews.
Is your issue resolved by any mean..
I cant apply Java script code on every back-end application...
the issue again... is this doesn't come when user directly logs in through ITS. over there user gets the alert. but only when user moves from Portal the work protect mode doesn't.
It  became very urgent issue.
I appreciate any help..
Regards
pankhuri

Similar Messages

  • Work Protect Mode for transactional iView...

    Hi Experts,
    Please help me to understand significance and features of Work Protect mode in portal.
    How to implement it.
    But main point is, is it possible to implement Work Protect Mode in Transactional iViews, i.e. let say we have created one transactional iView for SU01 tcode, which opens in New Window.
    Now if I directly close that window then ideally one popup should come telling the data is not saved.
    Also let me know if there is any other way to achieve my requirement.
    Appreciate for help.
    Regards,
    Ravi

    Hi Ravi,
    Thanks for your response.
    Kindly suggest what vaue we should give in this property "workprotect.mode.default".
    I was going through one link : [http://help.sap.com/saphelp_erp2004/helpdata/en/37/50fb5066f9db43b3b5d5fc8de0c051/content.htm]
    Also are you sure this setting will enable WorkProtectMode for Transactional iView as well.
    Regards,
    Ravi

  • Work Protect Mode with BSP in EP 6.0 SP14

    Hi,
    we need to create a BSP application that runs in a EP portal. We have many BSP pages in this application, each requiring a lot of user input.
    It would be really helpful to send a reminder to the user once he leaves a page and clicks another entry in the portal menu.
    We understand that the "work protect mode" does this trick in NW2004s under certain circumstances (i.e. "dirty flag").
    Is there any chance to build this behaviour also in the combination of a ABAP AS 6.40 (for the BSPs)with an EP 6.0 ?
    We would appreciate any help on this topic.
    Regards
    Marcus

    Hi,
    Does that drop down list change results in a reload of the page with new data on? If so, you should set the variable for confirm to exit after the reload.
    If there is no reload involved, the msg shouldn't show up. If lots of pages with drop down which work like this.
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • IAC and Work Protect Mode

    Hi,
    I have created a Role in Portal which is calling an IAC (bbpsc02) from SRM box. The problem is that whenever user open this transaction and if he without doing anything navigate to other role, he is getting Work Protect Mode dialog
    u201CYour Current page have unsaved data. Please take following actionu2026u201C
    Although the user had not done anything on this page but he is still getting this message. The transaction on screen display some text and ask the user to select some options using links. No input field on screen.
    Please provide some input on this peculiar problem.
    Regards,
    Anup Batra

    Hi,
    If the user clicks a link to start a transaction,then he/she has to complete the transaction or abort that one.
    To set the default behaviour for a transaction in the portal, the work protection  mode setting is available.
    Thanks
    Muthukumar

  • Work protect mode and wedynpro ABAP

    Hi,
    Does anyone know how the work protect mode should work for webdynpro abap?
    We are using webdynpro abap ivews for travel. When i click on the exit button within travel I get a pop up. If I navigate away i.e click on personal information I don't get a pop up.
    When I navigate away form a webdynpro java iview to personal information I always get a pop up.
    Shouldn't this happen  for webdynpro ABAP ivews as well?

    Hi
    In webdynpro java we have the class like WDPortalWorkProtectMode. But I could not be able get that in ABAP. Can you please help me by providing the name of the Class.
    Regards,
    Srikanth.

  • How do I troubleshoot Flash Player's protected mode for Firefox?

    Starting with Flash Player 11.3, a protected mode was added as a new security enhancement for Firefox 4.0 and greater on Windows Vista and higher.  This security enhancement is designed to limit the impact of attacks launched from malicious Flash content (SWF files).  For additional details on this feature, please see Inside Flash Player Protected Mode for Firefox
    After reviewing this FAQ, we'd appreciate if you would take a minute to let us know if it helped.  There is a link to a two question survey at the bottom of the page.
    While we believe this feature is fully tested and reliable, if you encounter issues with Firefox we recommend the following troubleshooting steps.
    Problem: Flash content does not appear, YouTube display errors such as "An error occurred.  Please try again later.", or Flash video will not function properly.
    Solution: If RealPlayer is installed on your system, please disable the RealPlayer Browser Record plug-in.
    Launch RealPlayer
    Click the RealPlayer icon in the upper left corner of the window and choose Preferences.
    Choose Download & Recording from the left hand panel
    Uncheck "Enable Web Download & Recording for these installed browsers"
    Click OK and close RealPlayer
    Restart Firefox
    If you are viewing this page in Firefox and Flash Player is not working, please click here for an HTML5 version of this video: YouTube HTML5 HD Link
    Problem: RealPlayer is not installed, Flash Player crashes in Firefox
    Solution:
    Troubleshoot Extensions and Add-Ons by launching Firefox in Safe Mode
    1. Exit Firefox
    2. Click Start > Run
    3. Type the following then press [Enter]:
         firefox.exe -p
    4. Click Continue in Safe Mode
    5. Attempt to reproduce the problem
    If the problem does not occur in safe mode, please try to isolate it down to an individual plug-in.
    1. Exit Firefox
    2. Re-launch Firefox
    3. Click Firefox > Add-Ons > Extensions
    4. Click Disable on all of your extensions
    5. Attempt to reproduce the problem, while enabling each extension until you can reproduce the issue
    If the issue persists in Safe-Mode, please continue with the steps below:
    Some users have indicated that random crashing stops when clearing their Firefox profile.  This step will allow you to temporarily test with a clean set of Firefox preferences, without losing your preferences.
    Exit Firefox
    Click Start > Run
    Type the following then press [Enter]: firefox.exe -p
    Click Create Profile
    Click Next
    In the Enter new profile name dialog, type "Test"
    Click Finish
    Select Test and click Start Firefox
    Use Firefox as normal.  If the problem goes away, clearing your Firefox preferences, or migrating the important settings (bookmarks, etc) to a clean Profile may be a good permanent solution.
    If the problem persists, switch back to your old profile by doing the following:
    Exit Firefox
    Click Start > Run
    Type the following then press [enter]:firefox.exe –p
    Choose your old account (typically "default")
    Click Start Firefox
    Solution: Try a clean Windows profile (You must be an Administrator to complete this step.  If your user account is not an admin type, skip to the next section for instructions on reporting a bug.)  Creating a new Windows user will rule out any account-specific preferences that may be enabled on your system. 
    Create a user account in Vista
    Create a user account in Windows 7
    Use Flash Player normally.  If the problem goes away, this indicates a compatibility problem, either with software you have installed or with preferences set on your account.
    Reporting a bug:
    Please file bugs at bugbase.adobe.com.
    Choose "Adobe Flash Player" as the product
    Choose "Browser Integration" as the product area
    Please provide as much information as possible with what you were doing before the crash and an exact URL where the crash occurred.
    If available, please attach your Firefox crash logs to the bug using the Attachments field.
    Show hidden files and folders. For more details, see the instructions for the operating system that you use: Vista and Windows 7.
    Crash logs are located at C:\Users\username\AppData\Roaming\Mozilla\Firefox\Crash Reports\
    Logs will be located in either the pending or submitted folder, depending on whether or not you submitted the crash report to Mozilla.
    Last resort
    Finally, if these problems are blocking you from using Flash Player we recommend, as a last resort, you either revert back to Flash Player 11.2 or temporarily disable Protected Mode.  We strongly recommend that Protected Mode is manually enabled once this issue is resolved.
    To revert to a previous version of Flash Player, please see this FAQ: How do I revert to a previous version of Flash Player?
    To disable Protected Mode, add the following line to your mms.cfg file located in:
    Windows 32bit: C:\windows\system32\macromed\flash
    Windows 64bit: C:\windows\syswow64\macromed\flash
    ProtectedMode=0
    If the mms.cfg file does not exist, create one using any standard text editor (e.g.. notepad)
    Depending on your operating system, you might need to first save the mms.cfg file to a writable location (such as your documents or desktop folder) and then copy the file into the destination folder using Windows Explorer.
    To re-enable Protected Mode, simply remove the line from the mms.cfg file.
    Hopefully this FAQ helped you.  Please let us know by taking a minute to fill out this simple survey.
    Did this FAQ help?

    Please ask your question on a forum for the Flash Player

  • Work Protect Mode Pop up

    Hi,
    I would like to get the source for the Work Protect Mode pop up that we see in the portal.
    Can anyone point out where can I get the actual source code?
    Regards
    J

    Hi Kai,
    Thank you for the response...
    I am not sure of the location of the text you suggested, but I found that
    text is maintained in CL_FPM_CONFIRMATION_REQUEST abap class. this text is divided in to two text 1) This application contains unsaved data which may be lost. and 2) Do you want to continue without saving the changes? And append this is the class constructor.
    We can change the text here... But thought changing the text is not a solution for my issue, so I need to address the root cause....
    I contacted SAP (raised an OSS message) and working with them on this, as of now we modified our logic in Value Determination BADI and it is working fine 90%
    Update: modified Value determination BAdi and V_T77SP_2 table entry to solve this issue!
    Thanks,
    Pradeep

  • Work Protect mode and browser navigation?

    Through testing we have noticed some behaviors with Work Protect that I did not expect. Can anyone help?
    We are on EP6 SP18. When changing data (ie. setting the dirty flag) on applications (CRM PCUI for instance) and then clicking some other link, button, etc. anywhere within the browser content area, the Work Protect mode fires correctly and pops up a confirmation warning.
    However, in these cases:
    (1)user clicks forward/backward browser buttons
    (2)user manually enters URL in address bar
    (3)user close browser
    (4)user clicks mouse buttons for backward/foward navigation (such as 3rd or 4th mouse button programmed to do back/forward)
    ...Work Protect does NOT fire and catch those events.
    Is this truly a limitation of Work Protect or should we investigate further? I can not find any definate wording of the above issues/limitations in any of the documentation (help.sap.com or on service.sap.com in notes).

    Hi
    In webdynpro java we have the class like WDPortalWorkProtectMode. But I could not be able get that in ABAP. Can you please help me by providing the name of the Class.
    Regards,
    Srikanth.

  • Default setting of the Work Protect Mode property

    Hi,
    can we set the default work protect mode to a particular value for every user in portal.
    Where we would have to make the changes in Portal.
    Best Regards
    Sid

    Hi Sid,
    You can set the default work protect mode in the epcfloader service configuration.
    Go to System Administration -> System Configuration -> Service Configuration, and edit the epcfloader service configuration.
    Change the workprotect.mode.default to the setting you like:
    1 = Protect unsaved data by opening a new browser window (standard setting)
    2 = Unsaved data is lost
    3 = Required behavior can be selected each time the popup appears
    If you don't want your users to be able to override this setting in personalization dialog, set workprotect.mode.personalize=off.
    See also http://help.sap.com/saphelp_nw04/helpdata/en/37/50fb5066f9db43b3b5d5fc8de0c051/frameset.htm.
    Best regards,
    Johan

  • Work protect mode enabled - but giving javascript issue in IE8

    Hi Experts,
    We need help on work protect mode issue. we enabled the work protect mode.
    When there is unsaved data and moving from existing page to other role, we are getting script error in IE 8 version. But for earlier versions(IE7) , it is working perfectly.
    It looks like some issue in the browser or some patch needs to installed for resloving this issue.
    can anyone help me in this regard.  Thank you.
    Thanks & Regards,
    Raghavendranath G

    Hi,
    The alternative way is....you can open the page using the compaitbility view..(You should be able to see the compatibility option in the address bar) This will prompt you to reload the page.
    Regards,
    Narendra

  • Enable Work-Protect-Mode in BEx-WEb

    Hello,
    I am using integrated planning in the SAP EP 6.
    Every time someone clicks on the portal navigation all changes get lost, unless the planning app was saved before.
    Is there a way in Bex Web to activate the dirty-flag and the work protected mode? This way the Portal itsself would recoginze changed data and prevent the loss of data.
    regards,
    Michael Kulhanek

    Hello Michael,
    just check the OSS 0734861.
    enter value "3" for workprotect.mode.default. perhaps this will help.
    best regards,
    michael

  • Very Urgent - Implementing Work Protect Mode

    Hi,
    Did any Web Dynpro expert here implemented Work Protect Mode ? (WD for Java)
    Promise to award points.
    Thanks.
    Ruthie.

    Hi Ruthie,
    I think that is very much possible in WD for JAVA.
    Please go through the following links for more help,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a891e490-0201-0010-fb99-b7e4f5dda2ec
    http://help.sap.com/saphelp_nw04/helpdata/en/88/585d420447e054e10000000a155106/frameset.htm
    http://sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
    I hope this helps you.
    Best Regards,
    Guru.
    PS: Reward points for helpfull answers.

  • FPM and Work Protect Mode

    Hi Gurus,
    Need your help with an issue I am facing.
    I need to implement Work Protection in a custom ESS appl. I read in the forum/ help that FPM itself manages WorkProtection/ Confirm Loss-of-Work for ESS applications.
    However, It doesn't prompt for 'saving' data in my case. I am not able to figure out a way to incorporate it?
    Any idea how to implement it? I did go through the FPMComponent in xsfpm dc. But, am not sure how to implement it in my application.
    Thanks in advance.
    Anjana R.

    Hi Ayyapparaj, Thanks.
    I am on NW04 SP 21. And Work Protect Mode works on the standard ESS applications.
    I am not sure how to implement work protection in my application or how to trigger the Standard Work Protect confirmation dialog window.
    I created a custom Confirmation window, but the client wants it to be consistent with the standard Work Protect Pop Up.
    I did set the isDirty to true and turned on the "Prompt to save work" option on Portal. But, still doesnt work.
    Could you please help me with this?
    Anjana R.
    Edited by: Anjana Raghav on Dec 20, 2007 7:42 AM

  • Urgent - Implementing Work Protect Mode

    Hi,
    I implemented Work Protect Mode in the doInit method of WD.
    My view contains a form that the user has to fill.
    For some reason, if I fill all the fields and press the "save" button, <b>still</b> the propmt dialog of the Work-Protect appears - as if the data wasn't saved.
    <u>My Code is:</u>
    WDPortalWorkProtectMode.setApplicationDirtyControl(WDApplicationIsDirtyMode.STANDARD);
    String firstName = wdContext.currentContextElement().getFirstName();
    if ( firstName != null){               WDPortalWorkProtectMode.setApplicationDirty(true);
    Thanks you all so much.
    Ruthie.

    Hi Ruthie,
    Put
    WDPortalWorkProtectMode.setApplicationDirtyControl(WDApplicationIsDirtyMode.STANDARD);
    WDPortalWorkProtectMode.setApplicationDirty(true);
    to wdDoInit.
    As Valery suggested Re: Mandatory InputField
    <i>For corresponding property create SimpleType in Dictionaries / Local Dictionary / Data Types / Simple Types (see WD outline). For that simple type define either MinLength constraint to be > 0 or FixedLength constraint.
    </i>
    use new created simple type for context attribute to bind with InputFiled`s "value" property.
    And in your action handler for "Save" button put
    WDPortalWorkProtectMode.setApplicationDirty(false);
    Best regards, Maksim Rashchynski.

  • Setting Work Protect Mode in Portal

    Hi ,
    Can anyone tell me how to set up the Work Protect Mode in for the portal general settings.
    Best Regards
    Sid

    Hi
    Click the personalize option in the masthead of the Portal default framework page. A popup opens and in the detailed navigation of the popup, the last option is work protect mode.
    The four option in it are as follows:
    Use default portal setting
    Protect unsaved data (open page in new window)
    Discard unsaved data (open page in same window)
    Choose action in popup on unsaved 
    Save and refresh the browser for the change to take effect.
    Regards,
    Ganesh N

Maybe you are looking for