Work space not remembering placment

I have 6 monitors set up on my computer (windows 7).  Every time I start Dreamweaver, I have to rearrange all of its windows, it never remembers their placement correctly, they are usually all randomly placed on one and a half to two and a half of my screens.  How can I get Dreamweaver to remember the actual placement of the windows?  I have the work space saved, and it does remember what windows and their sizes, just not their placement.

I have read allt hat and done all that.  It justr dosen;t seem to work, as I said in my original post, it remmerbers which frames and such are open and their sizes, but does nto open them back up in the actual place they where saved at, and usually opens most of tthem on top of each other on two or three screens, instead of sporead all around all five liek it should.

Similar Messages

  • Sims 2 not working, space not available?

    I wanted to uninstall my sims 2 game so that I could reinstall and start over. So I googled how to do that, deleted the EA games folder and sims folder from my hard drive. So I clicked on the Package Installer in the game's folder to install the game again. But it says that I need at least 1 mg free of local disk space. So I removed a bunch of stuff from my dock and deleted folders and it still say I can't install because of lack of space. And I don't have a lot of things saved on my computer, the most I have is my music
    What do I need to do?

    Hi Hillview,
    If you bought 'The Sims 2' for Mac then it will only run on either a PowerPC Mac or an Intel Mac running OS X, not under Windows with BootCamp unfortunately. This means that you can't attempt to run it in "PC" mode. The Apple Store states that the minimum 'Graphics' requirements to run The Sims 2 are either an ATI 9200 and higher, or a GeForce FX5200 and higher. Unfortunately they don't quite take into account that they are shipping macs with Intels integrated graphics chipset now, and no Intel specific requirements are mentioned in the system requirements. It does however state that a minimum of 32MB Graphics Power is required to run the game, and the GMA950 that is in your mac mini has upto 64MB shared, meaning that technically it should run fine.
    It must simply be a problem in the way that the Intel graphics chip processes visuals that are specific to the game its self and unfortunately you can't upgrade the Graphics chip inside your mac mini - it's soldered in! A call to the Apple Care Help Line may be your best bet, because the chances of you being able to get it running, aren't really looking all too good unfortunately =(
    Hope that I may have been of help
    -Pos

  • Firefox 7.0.1 does not remember/fill in username and password in Mac version although on Windows it works, so it's not the website preventing password being saved. what is up and how can this be fixed ?

    There are several sites where I now have to type in my username and password each time I return, such as turnitin.com. (I'm a teacher and use this for grading). Friefox used to be able to remember this for that site and it still works at my office where I have a windows machine. Not working on my Mac OS 10.6.8 and it is really annoying to have to retype every single time; it's not a financial site or anything so why can't the Firefox browser remember and re enter my info?
    And no, turnitin does not currently support Firefox 7 but it is only up to firefox 4 and up until now firefox at least worked to remember passwords.
    I looked at http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered and I have checked all the recommended browser settings and am not set to private browsing; the sites where this happens are not set in exceptions to remembering, and they are not set to be cleared automatically
    So, what's up and why doesn't Firefox remember passwords and usernames any longer?

    Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
    Still works on Windows, and with other browsers... It would be great if a fix is available.

  • My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

    Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

    Not unless the modem is causing a problem.
    What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

  • Can you WIRELESSLY connect a macbook pro to a monitor to have extra work space on a separate screen from your macbook? (not mirror, extra monitor/workspace)

    Can you WIRELESSLY connect a macbook pro to a monitor to have extra work space on a separate screen from your macbook? (not mirror, extra monitor/workspace)
    It needs to be wireless.
    I am not asking about mirroring, but as a second screen.
    Apple tv communties said the Apple tv cannot do this, but maybe another type device can?

    My thunderbolt port stopped working on my late 2011 MacBook Pro rendering my external monitor useless--or so I thought.
    Mac Genius suggested using the Apple TV via AirPlay Display as a $100 solution. Took me all of 6 minutes to figure this out as there are no directions in the Apple TV box supporting this. But, it does work and I am now back in business.
    PS. Don't set up with bluetooth--seems logical but you want to use AirPlay Display under Settings > Displays.
    Also, I originally thought my external monitor stopped working because I upgraded the OS. This time, it was definitely a hardware issue and not software. It also fixed a known sound issue my monitor had with Macs. First time in my 15 years I've ever had a ViewSonic have issues with an Apple product, too. Thanfully, it is now fixed.
    Hope this helps.
    Late 2011 MacBook Pro
    Maverick
    ViewSonic external monitor

  • I need to transfer information through firewire cable and could not remember how it works, please, help

    Please help, I need urgently to transfer information through firewire cable and I could not remember how it was that I do it. I've connected the computers and restarted one of them by pushing T on startup but it did not work.

    Shut down both Macs.  Connect them via FW cable.
    On the Mac you want to copy FROM.  Start up but make sure you are holding down the T key as soon as you press the power button.  And keep holding down the T key until the FireWire emblem appears on the screen - that's the indicator that the Mac is in Target Disk Mode (TDM).  Note: if you release the T key too soon the Mac won't go into Target Disk Mode.
    Start up the second Mac.  The first Mac will appear in the Finder as a disk.  You can use the Finder to copy whatever you want from the Mac that's in TDM.
    When you're done, shut down both Macs.  The Mac that's in Target Disk Mode can be shut down by holding down the power button until it turns off.

  • 'SHIFT variable RIGHT deleting trailing space' not working

    I have a character field in a transaction that occasionally gets populated with a value that has a space at the end or at the beginning or both. This is causing the dataload to fail. I added code below to remove these spaces from the end and beginning-
    SHIFT <variable> RIGHT deleting TRAILING space.
    SHIFT <variable> LEFT deleting LEADING space.
    The SHIFT LEFT works perfectly and deletes the space at the begining of the value but SHIFT RIGHT does not delete the space at the end for some reason. I tried defining the variable as a char (16), string but nothing seems to make it work.
    Note: I cannot use CONDENSE because the value can have spaces in between that we cannot delete.
    Any ideas why shift right wouldn't work?

    Hi Maanasa,
                           First of all Shift works only with string datatype. So transfer the contents of that character field into a string datatype and do the shift operation.
    Declare a string variable of that type. Data v_str type string.
    Pass the contents of the character field into the string.
    And do the shift operation on the string and pass the value of the string back to the character field.
    Shift v_str by 1 places right.
    Please try this.
    Thanking you,
    Jerry

  • Dock dissapear, Exposse, Spaces not work

    Dock is dissapear, Exposse and Spaces not work, i had repaired permissions from disk utillity but all is de the same, restart and all is not working, command + tab either work, and if a try to minimizar a window nothings happend

    I am experiencing this same problem. I have been fine for a few weeks after my Leopard update, but then all of a sudden today I could not find my dock. I wasn't able to get it back at all, so I tried to shut down. It would not shut down so I had to do a hard shut down by holding in the power button. When it rebooted, the dock was still non-existent. I did some googling and learned it might be a corrupt preference. I then deleted the preferences, and immediately a dock (the original default installed) came up. It seemed ok for about 30 seconds, then it quit, and keeps flashing, reappearing, poking out. I deleted the preferences again, same result.
    I ran disk utility. It found some permissions problems and "repaired" them. Now the activity monitor shows that my dock is starting and quitting, as stated above, and I can't see it at all. It's gone.
    I am pretty upset about this, I rely on the dock heavily for my drag and drop applications in CS3.
    Any solutions to this yet?

  • Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

    since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • I can not remember my icloud password.  I would like to recover it but the difficulty is my apple id and Icloud have differnt passwords and the links for recovery all work only to chnage my apple id password.

    I can not remember my icloud password.  I would like to recover it but the difficulty is my apple id and icloud have different passwords and the links for recovery all work only to change my apple id password.  SO how do I recover the icloud password?

    An Apple ID is used for everything (including this site) and including iCloud. See the quote below from https://appleid.apple.com/
    There is no such thing as an iCloud password but it is possible that you have 2 Apple IDs and you are using one of them for iCloud.
    An Apple ID is your user name for everything you do with Apple: Shop the iTunes Store, enable iCloud on all your devices, buy from the Apple Online Store, make a reservation at an Apple Retail Store, access the Apple Support website, and more.

  • Not getting planning Applications when Log on Work space

    Hi Dear Experts,
    when log on Workspace to access Planning:
    its show showing
    Navigate ->Administration->User management
    instead if Select Navigate > Applications > Planning
    and iam not getting planning Applications when Log on Work space
    I have Just Installed Essbase and Planning into my machine .. and i have opened work space area and
    and i tried to create first application by using the following URL
    http://localhost:8300/HyperionPlanning/AppWizard.jsp
    iam getting not able create first application..
    can you please guide me how can i work with planing applications..
    thanks in advance
    Kishore

    Hi Kishore.
    From config utility, did you create an instance before trying to access.
    I mean "product instance registration" and "data source configuration"
    You can find it in the installation doc
    Sandeep Reddy Enti
    HCC
    http://analytiks.blogspot.com

  • I updated Firefox on my Mac (10.6.8), and now history is not remembered (that option is checked) and the back button won't work. Help?

    I updated Firefox on my Mac (10.6.8), and now history is not remembered (that option is checked) and the back button won't work. Help?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • HT201407 Ipod My daughter locked my iPod with a code and now she does not remember it  It is locked and it will not work connected to iTunes

    My daughter locked my iPod with a code and now she does not remember it  It is locked and it will not work connected to iTunes

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • CS4 not recognizing new RGB working space

    I'm using CS4 on a Mac. Illustrator doesn't seem to recognize a switch to Adobe RGB as my working space. I opened the same set of swatches in Photoshop and Illustrator. In PS the HSB numbers and the RGB numbers for each swatch varied considerably depending up on whether or not my working space was sRGB or Adobe RGB. But in Illustrator they stay the same for both working spaces - roughly the same as the numbers as for PS in the sRGB working space. So my conclusion is that Illustrator hasn't noticed that I've changed by working space from sRGB to Adobe RGB. Any thoughts or suggestions?

    I do use the the synchronization feature in Bridge. However, when I switched the working space from sRGB to Adobe RGB, I did it simply by using Edit>Color Settings in Illustrator, as I did not want to change the set up in any other of the CS programs.

  • Flexible Space not working

    Flexible Space not working, with firefox v1.5 pictured here..
    http://img444.imageshack.us/img444/6527/firefoxv15skin.png
    You see i have a big space FF icons and google search, by adding one flexible space. I cannot seem to get this to do the same with firefox v3. Will have to add x10's or more of flexible spaces to be the same. Have tried to resize the flexible space with v3 noting to grab to resize.
    Anyone know of a sollution how to do this, to be like that in the picture (url link above) ?

    Actually it doesn't really matter if you'd come back, or not. It's just that you've wasted everyone else's time. Here's a couple of links, when downgrading and/or installing a different/two version/s:
    * [http://ftp://ftp.mozilla.org/pub/firefox/releases/ Firefox FTP, all versions download].
    * [http://forums.mozillazine.org/viewtopic.php?f=23&t=2249039 Installing multiple different versions of Firefox], mozillaZine.
    * [[Installing a previous version of Firefox]], downgrading (not very useful).
    * [[Updating Firefox]], upgrading (also not useful, but like the article above: it's got a couple of links that could be -somewhat- helpful :))

Maybe you are looking for