Work Status tables missing

Hi All,
We have two tables in our production system SAP dictionary whose
database table entries are missing. SAP Note # 33814 does not make a
mention about the missing tables in /1CPMB/ namespace. We were prompted
for object key while trying to delete dictionary entries
could you tell me why these generated tables are missing from oracle database?
/1CPMB/LKWSMQUX8 BPC Work Status - Generated Table for Work Status Locks/1CPMB/LKWSMQMIQ BPC Work Status - Generated Table for Work
Status Locks
Please advice.
Regards,
Raghu.

Hi Raghu, Not sure why the tables got deleted from the underlying database, but those can be recreated using Database Utilities(transaction SE14).
Regards,
Vinod Swarnapuri

Similar Messages

Package Log - Error checking work status

Hi, Experts,
We are using SAP BPC 10 NW.
When we run a package manually it is ok. But when we include it at package link (with the same prompt) and run it, we received error message (Error checking work status). Look at the log below:
++++++++++++++++++++++++++++++++++++++++++++++
/CPMB/MODIFY finished in 0 seconds
/CPMB/ALLOCATION_LOGIC finished in 449 seconds
/CPMB/CLEAR finished in 0 seconds
[Selection]
SELECTION = /CEREAL/EXPENSE/PRIVATEPUBLICATIONS/BPCADMINBIP/TempFiles/FROM.TMP@@@SAVE@@@@@@EXPAND@@@|DIMENSION:CATEGORY|PROJETADO,REVISAO|DIMENSION:ENTITY|CC_11
[Message]
RUN_LOGIC:
Error checking work status
+++++++++++++++++++++++++++++++++++++++++++++++
There is no work status activity at REVISAO and PROJETADO category members at this model.
Would anybody help us to understand what is happening?
Best Regards,
Ana Teresa

Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo

Work Status log

Hi experts,
Coud anyone say how to fill Locks Log Table UJW_UPD_LOG. It found in programm UJW_WS_TEST.
I need to analyse Work Status historical log - no only last state.
Thanks a lot,
Oleksandr.

Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo

Work order-System status table

Hi,
In which table does the system status of the work order (TECO, Created, Released etc) gets updated? I want to know in which table does all the open work orders get updated.
Thanks in Advance

Dear Jegashree,
Check this link
[Production order status|Table : Production order status;
Regards
Madhu

Work Status Report Date and Time Setting

Hi all
We are running BPC10 on servers configured with Central European Time which is currently 2 hours ahead of GMT allowing for Daylight Savings Time.
From what i can see in BPC10 date and times are now stored in GMT (Zulu time) in the Audit activity tables so when a user updates the work status at say 11:00AM local CET time then a value of 09:00AM GMT is stored in the Audit Activity Header table.
We have a report in excel that uses the EVLCK formula and will return the correct value of 11:00 am however if we run the Work Status Audit report on the Planning and Consolidation home page with user preferences set to Central European Time +1 then the time is displayed as 10:00am suggesting that daylight savings time is not accounted for. We need to set the time to Eastern European time +2 hours to display the correct figure.
Can anyone explain why this happens? Has DST been overlooked?
Rgds
Alan

Hi Alan,
probably it's a bug, I think it's better you open an OSS message to SAP.
Regards
Roberto

Work Status Report

Hi,
I was wondering if there is a work status report available in the system? What I would like to see is a summary of which dimensions are locked in BPC so that I can monitor it to ensure that someone doesn't accidentally open something by mistake.
Currently I have to go through BPC Web and check the dimensions manually. If there is no report can someone confirm where the work status data is stored so that I can have one built.
Is this the table (where "finance" is the application) - [dbo].[tblFinanceLock] ??
thanks in advance.

Hi,
You're right, work status information are stored in "tbl<App>Lock".
Concerning your first question, you can build a BPC for Excel report that retrieves work states.
Having for example an expansion on all entities, you can use EVLCK function (from 5.1 version) or EVASV function (in CPM 4.2). You can then do whatever you would like to send it to others via distribution list or other.
Hope this will help.
Kind Regards,
Patrick

Populating a load-status table from SQL*Loader

Hello,
I am using SQL*LDR to load a table and once I'm done with this load I am supposed to populate a status table which will capture the 'SYSDATE', and the total number of rows I loaded in the other table.
Can anybody help me?
Thanks

BTW, the load-status table would take the error-record-count as well as the load-count?
Sorry missed that earlier!

ABAP Work process table is not showing in MMC

HI ,
My ABAP ystem is working fine but in MMC ABAP work process table is not showing.
After rebooting the server in MMC console SID is not appaeraing i have to add the entries eevry time after rebooting.
Please help me any one.
Thanks
Nekkalapu

Hi,
I have checked the note :
Use the SAP tool NTSCMGR. EXE to call up the status of an SAP service and to uninstall or install SAP services. Note with service new installations that, before starting, you must assign a corresponding SAP user for the service with whom the service is started ('Control Panel -> Services -> Startup -> Log on As This Account -> <SID>ADM or SAPService<SID>').
a) Status query:
ntscmgr.exe query <service_name>
b) Removing a service:
ntscmgr.exe remove <service_name>
is that the right way or any other way .
Please suggest my system alaready in running state can we do this things while system up or downtime required.
Is their any impact on exsiting system.

Locked Work Status doesn't work

Hi
This is a new case.
I have original work status like this. I show MAN only in this example
Unlock    MAN=unlock
Submitted MAN=owner
Approved MAN=locked
Then I add a new work status line as the intial state
Start     MAN=locked
Unlock    MAN=unlock
Submitted MAN=owner
Approved MAN=locked
The purpose of the Start work status is to prevent the user submit something at the initial state.
But the Start work status doesn't lock anything, user is freely to submit data on this work state.
My analysis,
I changed the current work status from Start to Unlock and switch it back to Start and the lock does its job.
Anybody has the same issue?
Halomoan
Edited by: Halomoan Zhou on Aug 26, 2008 11:50 AM

It is logical that it works only after you upgrade to unlocked and downgrade again. The workstatus mechanism makes use of a table called tblFINANCElock (or what name your application has). In the beginning there are no records in this table which indicates that the data is unlocked. Once you update the status for the first time a record is generated with a status. From now on the system can link the records to the work status setting that you have defined and see that status "start" should lock the data. I think this functioality works as it is intended, and the only workaround for you is to lock and unlock the data before the users start entering data for that period.
-Joost

Work status from the BPC for Excel interface

Hello everyone !
I got an issue on version 7.0M of BPC with WorkStatus. When i try to access to the work status from BPC the page won't load but i can access to it by the Web. Do you have any clue about that ?
It it the BPC server configuration ? The web site is with ASP2.0 is it an issue ?
Best regards,
Damien

The problem seems to be related to how you configured the BPC application and web server.
Just check table tblapsetinfo and tblserverinfo from database appserver to see if you have right configuration.
I mean if you have the same name (FQDN or IP) for both application server and web server.
Osoft virtual directory must work using .Net 1.1 no t2.0.
Regards
Sorin Radulescu

Error checking work status

Dear ALL,
I'm working on SAP BPC 10.0 NW version.
So, I'm launching a script logic for a particular company, actually working on the currency translation but unfortunately I got an error "Error checking work status".
I did enable the Work Status in my model, and I did also put 2 Controls in it. But, I'm very sure the 2 Controls are all pass which I could also see the same from Control Monitor.
Any part which I could have missed out or any steps I have to work on in order to skip the error?
BR,
Antony

Hi Antony
Finally the problem was bigger than I thought; the user uploaded data from previous period and it’s affected the currency conversion, because it is configured at periodic way
The access member profile for each group was configured wrongly, too
We fix this point and the currency conversion and the work status pass OK
Thank for your time answer its
Regards
Ariel

Work status error

Hi gurus,
When i`m implementing the work status when i lock a data region and i try to send data instead of receive a message like "this data region has submitted work status" i received and error message that says "Error when try to check work status".
It doesn't allow me to send data but when i try to open the region via BPC for web to change the work status it shows me an incorrect current work status.
Anyone has the same problem
Thanks in advance.

Hello eljosetxu,
This may be related to some problem in UJW_STATCODE table.
In this table, you should see in STATUS colums an indentifier number for the work state and an sequential number in column ORDERN (for each apset) starting in 0.
The other columns will show what you have defined during work status configuration where 0 is manager, 1 is owner and 2 means both.
In table /1CPMB/LKWS<APPSET_PREFIX><APPL_PREFIX> you can check what is the SATUS for each locked intersections and compare.
As far as I know, the numbers in ORDERN must be sequential. Confirm that the column STATUS for the data region in the LKWS* and UJW_STATCODE tables are the same.
Hope it helps! Let me know what you'we found
Debora

Blank work status setting page

Hi,
I did a backup of an appset from bpc 5.1 and restored it in bpc 7.0 MS.
i have done all the security changes, changed the database name in the "owner" category in the "entity" dimension accordingly but i still can't bring up the work status changing page.
after i clicked on "set workflow (approval status)", i was brought to a web page, but it just shows a blank action pane. back in 5.1, this would be where you use "active cv" or "another cv"
i noticed a new column in work status settings, i.e. base hierarchy. and there's a default of "1" to all my work status dimensions. Does this have anything to do with my missing work status action pane?
any idea? thanks in advance.
cheers

Hi Shyam,
thanks for your reply, sorry that i can dedicate points to you. i thought by unmarking my question as a question, i can delete my question, but unfortunately it stayed in the sdn forum.
it turned out to be a rookie mistake of not assigning the right users to the application set, after i did an appset restoration in a new server. i also should have assigned the task profile of "change work status" to the relevant users.
thanks for your help again.
cheers

Work status question

Hi gurus,
I've a problem with work status, maybe i'm a little lost.
I've the following hierarchy (5 level hierarchy)
099-- (owner: user2)
    -001   (owner: user2)
     00101   (owner:user1)
          0010101    (owner:user1)
                                 001010101 (owner:user1)
                                 001010102   (owner:user1)
                                 001010103   (owner:user1)
The user always insert data in member level in BAS(00101) [001010101,001010102,001010103]
I want that once the user1 enters the data for the [001010101,001010102,001010103] cost center, he closes these cost center and
he won't be able to reopen again. and if he would have to enter data the user2 must open these cost center.
So i have three work status
DEFAULT WORK STATUS     ALL   ALL ALL ALL ALL       BOTH
OPEN                                     ALL   ALL ALL ALL ALL       OWNER
CLOSED                           LOCK LOCK LOCK LOCK LOCK MANAGER
When i go to BPC web to change the work status i selected 00101 and "include children in data region"
and change the work status to CLOSED, after that the user 1 isn't be able to insert data. But the user1 can enter again and change the work status of 00101 "include children in data region" to OPEN and then he can insert data.
I don't know what i'm missing. Any help, please?
Best regards

Hi,
I've changed the work status as you have indicated me but it doesn't work.
user 1 can set the work status to closed but he can reverse this work status to Open.
I don't want the user2 closes the work status because below 001 there are many branches
001 (user2)
    00101 (user1) --- children (owner of all user1)
    00102 (user3) --- children (owner of all user3)
    00103 (user4)
   00125 (userXX)
I want that every user close his branch and not be able to enter data. Unless the user 2 opens this branch.
Thank you for your patience

Member Validation in Work Status settings

Hello,
Within the workstatus set up on application level (work status settings) one can define an owner dimension in the work state column and also define which dimensions are relevant for work state by indicating 'yes'. How this works is clear. But for the other dimensions indicated as 'no' one can define member validation, the meaning and function of this is not clear to me.
Has somebody any idea what this is about?
Many thanks!

You can change the work status settings for each application. Changing the work status settings involves identifying three to five 'work status dimensions,' and then defining specific members for the remaining non-work status dimensions used for validation purposes. You must determine which account you will use for validation of the data at the time the work status is changed. The validation account must be &rdquor;0u201D at the intersection of the 3-5 variable members and the members designated for the non-work status dimensions. If the account is not &rdquor;0u201D then the owner/manager cannot set the work status. This is an option feature.
The dimensions you select as the work status dimensions are the variables in your business process. For example, the entity, category, and time might change based on who is submitting data, but the account, data source, reporting currency, etc., remains static. (Typically, Time is a work status dimension since data is usually segregated based on time.)
For example, lets say that you set Entity, Category, and Time as your work status dimensions for a given application. You then set your other current view members to the following: Account: Validation; DataSrc: TotalAdj; Intco: All_Intco; and RptCurrency: LC. In addition to assigning work status dimensions, you also specify which dimension is the 'owner dimension.' The owner dimension includes the Owner property. The owner property determines who can edit a work status setting. The following figure shows this setup, where Entity is the Owner dimension.
A user attempts to post data to the current view shown in the following table. The system checks the 'validation' account to make sure the intersection equals zero (0). If so, the data is posted, and a success message is displayed. The user can now set the work state to 'submitted' on that intersection. Subsequent submissions to that exact intersection will be rejected. Users can only send data to the same intersection if the Entity, Category, or Time member changes.
You can find aove information in help file
http://<servername>/OSOFT/Help/Admin/HelpStart.htm#
Hope this helps.
Sam

Work Status tables missing

Similar Messages

Maybe you are looking for