Workarea rule to include configuration doesn't work

Hi,
I created a workarea with the rule 'INCLUDE_CONFIG(Test R1 Int Test{MAIN;1}=Configuration)', however the workarea doesn't show the included configuration in the navigator, even after refresh and requery. The configuration and its member though can be seen.
I use 9i SCM (9.0.2.80.10).
Am I missing something ?

Stephan,
You probably have not included the owning folders of the files. If they are not in this, or an additional configuration you will never see the files.
regards,
David

Similar Messages

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

Copy/Paste Audio Configuration doesn't work for me. What am I doing wrong?

I've read all the other threads on this topic. Some say you have to save before you copy, etc., but nothing works for me. I open up a Logic song that has various Audio tracks, Aux tracks, and VI tracks. I open the Mixer and select Copy Audio Configuration. I close the project file, open up a new blank file, open the Mixer and hit Paste Audio Configuration. The only thing that happens is a single empty track gets pasted, that's it. This couldn't be broken in 8.01 AND 8.02, could it? Tell me I'm doing something wrong, please.

Hi,
if you want to copy the actual channel strips, you need to go to the Environment window, select them, press copy, and paste them into the Environment window of the other song.
Audio configuration doesn't equal channel strips, but refers to how these channel stripes are configured (eg. which plugins they use).
Or you could create the audio objects (channel strips) you need to use in the new song manually, and then copy the audio configuration, because then that copy/paste process would have some objects to paste the configuration into.
You could probably even create the audio objects after you have pasted over the configuration, but I haven't checked if this works.

Standard Text with ' include' option doesn't work with order created by FM

Hi ABAPers,
Standard text with 'Include' Option does not work with all the Order created via the Function Module SD_ORDER_CREATE_WWW. Where as Order created via VA01 display the Standard text with 'Include'.
On my analysis I found that, Order created via FM use the '*' 'Comment' instead of ':/' 'Command' in the script editor. So the Standard text inserted was considered as a Text instead of command.
Hence issuing print or print preview, the Script display the INCLUDE statement instead of the text.
Can you please let me know the reason and the way to rectify it.
Thanks & Regards
N.Suresh Kumar

Hi.
Make that * command as /: and try in ur program..
It works..
Hope it helps...
Cheers,
Simha.

SNMP traps configuration doesn't work in CUSTOMER-CONTEXT

Hi evryone;
I'm having some issues configurin SNMP traps on a ASA5520 USER-CONTEXT (Cisco Adaptive Security Appliance Software Version 8.2(4)):
I had already configured SNMP traps on ADMIN-CONTEXT and traps were getting the correspondig NETCOOL SERVERS (10.105.27.115 and 10.105.27.118) as you can see in point 2).
Cuold you please give me any clue of why I get this output for a non ADMIN-CONTEXT and why I do not even see SNMP packets output
1) CUST-09-CONTEXT
name 10.105.27.115 Netcool1_TESTBED description Netcool1_TESTBED SNMP server.
name 10.105.27.118 Netcool2_TESTBED description Netcool2_TESTBED SNMP server.
snmp-server community sjnemdhqksptabld
snmp-server host CUST-09-HCS-MNGT-TRANSIT Netcool1_TESTBED community sjnemdhqksptabld version 2c
snmp-server host CUST-09-HCS-MNGT-TRANSIT Netcool2_TESTBED community sjnemdhqksptabld version 2c
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
route CUST-09-HCS-MNGT-TRANSIT 10.105.27.0 255.255.255.0 192.168.228.1 1
CAPTURES
Lab-asa1-p/CUST-09-CONTEXT/act# capture TEST1 interface CUST-09-HCS-MNGT-TRANSIT match ip host 10.105.27.115 any
Lab-asa1-p/CUST-09-CONTEXT/act# show capture TEST1 trace detail
23 packets captured
   1: 15:17:16.373927 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 9815)
   2: 15:17:18.370433 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 10598)
   3: 15:17:20.370433 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 27648)
   4: 15:17:22.370433 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 3518)
   5: 15:17:24.370433 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 18995)
   6: 15:17:43.015258 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 2110)
   7: 15:17:45.010436 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 11567)
   8: 15:17:47.010436 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 25551)
   9: 15:17:49.010436 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 3716)
10: 15:17:51.010436 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 20820)
11: 15:48:16.998483 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 25423)
12: 15:48:18.990366 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 30357)
13: 15:48:20.990366 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 31174)
14: 15:48:22.990366 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 10878)
15: 15:48:39.735527 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 8146)
16: 15:48:41.730354 1200.0314.0600 0000.0c9f.fc14 0x8100 118: 802.1Q vlan#3092 P0 192.168.228.4 > 10.105.27.115: icmp: echo request (ttl 255, id 1803)
17: 15:49:01.881134 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33434: [udp sum ok] udp 0 [ttl 1] (id 15279)
18: 15:49:01.881744 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33435: [udp sum ok] udp 0 [ttl 1] (id 20090)
19: 15:49:01.884201 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33436: [udp sum ok] udp 0 [ttl 1] (id 24847)
20: 15:49:01.886672 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33437: [udp sum ok] udp 0 (ttl 2, id 8822)
21: 15:49:04.880356 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33438: [udp sum ok] udp 0 (ttl 2, id 20949)
22: 15:49:07.880371 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33439: [udp sum ok] udp 0 (ttl 2, id 9126)
23: 15:49:10.880340 1200.0314.0600 0000.0c9f.fc14 0x8100 46: 802.1Q vlan#3092 P0 192.168.228.4.49175 > 10.105.27.115.33440: [udp sum ok] udp 0 (ttl 3, id 24404)
23 packets shown
I had already configured SNMP traps on ADMIN-CONTEXT and traps were getting the correspondig NETCOOL SERVERS:
2) CONFIGURATION ADMIN-CONTEXT
IP Management ASA-FW -->10.105.89.38
interface GigabitEthernet0/3.710
nameif management
security-level 100
ip address 10.105.89.38 255.255.255.192 standby 10.105.89.39
management-only
name 10.105.27.115 Netcool1_TESTBED description Netcool1_TESTBED SNMP server.
name 10.105.27.118 Netcool2_TESTBED description Netcool2_TESTBED SNMP server.
snmp-server community sjnemdhqksptabld
snmp-server host management Netcool1_TESTBED community sjnemdhqksptabld version 2c
snmp-server host management Netcool2_TESTBED community sjnemdhqksptabld version 2c
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
ip route 0.0.0.0 0.0.0.0 10.105.89.1
CAPTURES : I could see 206 SNMP packets output and traffic towards the NETCOOL SERVERS (10.105.27.115 AND 10.105.27.118)
Lab-asa1-p/ADMIN-CONTEXT/act# sh snmp statistics
0 SNMP packets input
    0 Bad SNMP version errors
    0 Unknown community name
    0 Illegal operation for community name supplied
    0 Encoding errors
    0 Number of requested variables
    0 Number of altered variables
    0 Get-request PDUs
    0 Get-next PDUs
    0 Get-bulk PDUs
    0 Set-request PDUs (Not supported)
206 SNMP packets output
    0 Too big errors (Maximum packet size 512)
    0 No such name errors
    0 Bad values errors
    0 General errors
    0 Response PDUs
    206 Trap PDUs
Lab-asa1-p/ADMIN-CONTEXT/act#
Lab-asa1-p/ADMIN-CONTEXT/act# capture TEST1 interface management match ip host 10.105.27.115 any
Lab-asa1-p/ADMIN-CONTEXT/act# show capture TEST1
5 packets captured
   1: 18:36:17.631070 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.115.162: udp 356
   2: 18:36:18.491261 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.115.162: udp 355
   3: 18:36:22.389338 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.115.162: udp 266
   4: 18:36:29.491231 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.115.162: udp 355
   5: 18:36:40.491246 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.115.162: udp 355
5 packets shown
Lab-asa1-p/ADMIN-CONTEXT/act# capture TEST2 interface management match ip host 10.105.27.118 any
Lab-asa1-p/ADMIN-CONTEXT/act# show capture TEST2
13 packets captured
   1: 18:37:16.198094 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 356
   2: 18:37:24.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   3: 18:37:35.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   4: 18:37:46.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   5: 18:37:57.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   6: 18:38:08.491322 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   7: 18:38:19.491292 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   8: 18:38:30.491338 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
   9: 18:38:41.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
10: 18:38:52.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
11: 18:39:03.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
12: 18:39:14.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
13: 18:39:25.491307 802.1Q vlan#710 P0 10.105.89.38.162 > 10.105.27.118.162: udp 355
13 packets shown
thanks
Ana

Hi guys coould you please help me out ??
BR
ANA

EMET 5.0 Pinning Rule doesn´t work

I have installed EMET 5.0 on my Windows 7 pro system. I have configured a pinning rule for my internetbank exactly the same way as i did with EMET 4.1. But when I apply a different certificate
from my bank's to test the rule nothing happens - no warnings when I log in to the internetbank. Except once!. With EMET 4.1 the warnings never failed to show.
The new EMET 5.0 blocking function doesn't work at all (which is very disappointing, as this was the main reason why I upgraded to EMET 5.0).
Anyone who knows how to do to make this work?
I tried to enclose screenshots of my current configuration, but got the error message:
"Body text cannot contain images or links until we are able to verify your account."
But i don't understand how to verify my account...sorry...

This morning I:
1. Logged in as administrator on Windows 8 (Swedish version).
2. Installed and configured EMET 5.0 with recommended settings and added pinning/blocking rule for my internetbank. Imported certificate different from that used by my internetbank.
3. Logged out.
4. Logged in as standard user.
5. Launched Internet Explorer in desktop mode (didn't run as administrator).
6. Tried to log in to my internetbank – pinning rule blocked login, nice!.
As you stated before, pinning rule does not work as one would like on Windows 7 (I have windows 7 professional English version).
Have not yet tried to use EMET logged in as administrator on Windows 7 but why bother? I agree with you, not a good idea to log in as administrator and then use internet…
I will use Windows 8 for my internet banking until this is resolved.
Thank you!

"itunes has detected a problem with your audio configuration" Now Itunes doesn't work on my windows 7 machine. What to do?

I have a Windows 7 system. ITunes used to work fine. Recently I am getting a message:
"ITunes has detected a problem with your audio configuation. Audio/Video playback may not operate properly."
I have reloaded and repaired ITunes. I have uninstalled and reinstalled Quicktime. Nothing works.
Itunes doesn't work any more on my machine. Anybody?

Hey there bogusss,
I would recommend the troubleshooting steps from this article named:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/ts1371
If this issue occurs with iTunes 7.0.2 - 7.6, customers may instead see this error message:
"iTunes cannot run because it has detected a problem with your audio configuration"
If this occurs with iTunes 7.0 or 7.0.1, customers may instead see a -200 error when opening iTunes 7.
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Jabber for windows 9.2.1 - InitialPhoneSelection doesn't work if configuration is in custom config file

Hi,
my customer wanted set InitialPhoneSelection to deskphone mode, when users firs run Jabber for Windows (ver. 9.2.1).
I created custom config (configurationfile=jabber-config-deskphone.xml) but it doesn't work.
Policies>
<InitialPhoneSelection>deskphone</InitialPhoneSelection>
</Policies>
I tested it couple times and at the end I tried put configuration to default jabber-config.xml and ... this functionality start working...
Could you check guys if you have same problem with custom config file? I think that it is bug. Maybe other option don't work in custom config file.
Thanks a lot
Pavel

Hi Pavel,
This setting is only when the client is installed and started by the user for the first time. After that the client will save the user preference (what was the phone selection when the user exited the client) and use it in subsequent logins.
Having said that, can you please specify in details how exactly you did your tests or maybe test again taking the above into consideration ?
Thanks,
Christos

I am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

i am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

Mail: ANY doesn't work in smart mailboxes or rules?

I want to create a smart mailbox that will copy and archive all messages to/from a particular recipient and e-mails to/from others about the subject of most of the conversation with that recipient. I want the archiving to happen as they arrive in my inboxes and not automatically remove them from the servers--some I still need on the servers to access from multiple locations/machines.
But I can't even get to the archiving issue: the smart mailbox that says 'contains ANY message' meeting these rules:
contains recipient1
contains subject2
always has fewer messages than one that simply 'contains recipient1' so the ANY condition, that in boolean terms should be an OR combination, appears to functionally act as an AND.
When I tried to create a smart mailbox folder to contain two mailboxes, one for contains name1 and one for contains subject2, each of which separately works fine, clicking the smart mailbox folder containing both leaves the window empty, so I can't see the messages name1 and subject2 interlaced in the date sent order or any other. I just get one group or the other by clicking the submailboxes.
And trying to bypass the problem using rules doesn't work either--the 'any' command is as dysfunctional there as it is in the smart mailbox dialog. I can manually search for the relevant terms (recipient1 and subject2) and option+drag them to a mailbox for archiving, but this results in many duplications, especially if repeated over time, not a happy result.
Some searching here and googling suggests that the ANY command is problematic in this OS for a lot of people, but is there a known fix? Or a better way to create a 'smart' archive to do what I want?

Okay, I think I understand better now. So I just ran a test, by creating the following rule:
I specifically chose an address (obviously not the one shown) that I had a message from in my Inbox, and a word that was present in the subject line of several messages in my Inbox. When I ran this rule on my Inbox, it copied exactly the messages I would have expected into the test mailbox. Are you seeing different behavior with the same rule, or is your rule constructed differently?
If the difficulty is with running the rule, note that (as I said earlier) rules only run automatically on unread incoming messages. It won't run automatically on existing messages or on messages on an IMAP mail server that you have read on another device using (in which case they will have been marked as read). If you need to run this in such conditions, you'll have to either run the rule manually or run it via an AppleScript or something similar that is somehow (via something other than Mail) made to execute at certain times/intervals or under certain conditions.
And you're correct, a smart mailbox would be totally inappropriate for what you're trying to do! It would behave exactly as you guessed.

Automatic Proxy Configuration URL doesn't work on some computers, but Manual proxy can work

It seems that the Automatic Proxy Configuration URL doesn't work, I use the command netstat -a, can't see the connection to proxy server, but manual proxy is ok, and I tested on some others computers, most of these computers can work normally with Automatic Proxy Configuration URL.
For the computer can't work normally with Automatic Proxy Configuration URL, I did below actions
1.Clear the cache
2.update the version of firefox
3.reinstall the firefox
4.use the safemode to run firefox
but unfortunately, still doesn't work.
Can some dear friends give me a big favor for this? Thanks a million in advance!

I have the same problem, just showed up recently - very fricking annoying!!

I updated imovie, which is now totally different. I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos. Clicking on "close" doesn't work. How do I get out of "import"?

I updated imovie, which is now totally different. I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos. Clicking on "close" doesn't work. How do I get out of "import" and then how do I access iphoto?

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Feature setting Masterpage & CSS doesn't work when included in SiteTemplate - but does work when activated manually

Hi,
I'm experiencing a strange behaviour recently. I wrote a feature with an EventReceiver that sets the masterpage and alternate css file for the current spweb it is activated for. When I activate that feature manually it works like expected. But if I include
the same feature in a SiteTemplate and it is called during site-creation, it doesn't work. I debugged it and stepped through it. As far as I can tell everything looks right. It sets the masterpage and css file like it should and throws no error. But when the
site loads in the end, it suddenly still uses the v4.master and no alternateCSS. How can that be?
If I deactivate the feature then manually and activate it again, it works...
Here's the feature:
const string masterPage = MyOfficeProcess.master";
const string searchMasterPage = "MyMinimal.master";
const string alternateCss = "MyOfficeAlternateProcess.css";
public override void FeatureActivated(SPFeatureReceiverProperties properties)
SPWeb web = (SPWeb)properties.Feature.Parent;
using (SPWeb topLevelSite = web.Site.RootWeb)
string relativePath = topLevelSite.ServerRelativeUrl;
if (!relativePath.EndsWith("/"))
relativePath += "/";
if (web.WebTemplate == "SRCHCENTERLITE" || web.WebTemplate == "SRCHCEN" || web.WebTemplate == "SRCHCENTERFAST")
web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + searchMasterPage;
else
web.MasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
web.AlternateCssUrl = relativePath + "Style Library/My/" + alternateCss;
web.UIVersion = 4;
web.Update();

Hi,
You can put a copy of your master page within the template site, use that for the site's master page, and then save the site as a template then check whether it works.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/30699/featureactivated-not-called-for-site-template
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

.jar includes jdbc driver but doesn't work

Hi
I'm quite new with Java. I've just created my first app in java, it's some kind of CMS. I have to give to my friend who can only install JVM and I can't set up his computer, because he lives in other city. What's the problem then:
I tried to compile (build) complete file with jdbc driver. And actually I've done it (when I open jar with winrar I see that mysql-connector.jar is there) but it's not working. I still have error:
SQLException: com.mysql.jdbc.Driver
No suitable driver
08001
It works fine when I'm running it with NetBeans, but built jar doesn't work at all.
Please help me with this problem. I was searching in many forums for the same problem, but no one had it (I mean EXACTLY the same). I have had many problems already with adding connector to NetBeans project at the beginning, but finally I've done it after 2 days - reinstallation of NB solved the problem. Is it possible that's NB fault again?
Thx for any clues
Michael

Hello,
Try to include a Class-Path option in the Manifest of your jar and see if that works.
Hope this helps

Mail Rule Doesn't Work

I participate at some message boards. I recently upgraded my yahoo email account so I could POP my mail using Mac Mail. Fine. So I tried to set up a rule to route emails from those boards into a mailbox in Mail I created called "Message Boards". Only it doesn't work. The messages go into the Inbox and not the boards mailbox. What did I do wrong? I set it so that anything from those incoming emails would be moved to that mailbox, but it's just not doing it.

Try splitting it into two separate rules, one for each condition. Add an action after your colour action "stop applying rules"
AK

Workarea rule to include configuration doesn't work

Similar Messages

Maybe you are looking for