Workaround for Fail to Save?

Is there any way to manually save projects?
Because... I just lost have a days work of editing because auto-save does not work.
Is there some obscure cmd to trigger the "auto" save into saving the file?
Is there an other way of hitting save?
--- related question ---
what is the file save? the one in folder "events" or "projects", because both are called "fcp recent project" or something.

I had the same issue and so I called apple. They basically told me that you can duplicate the project in order to make it "save" manually. You can do this by clicking on the reel icon in the bottom left corner of the app and it'll bring up all your projects. Right click on the project you want to save and select duplicate. It only duplicates the project without the media which is really small file size. After you duplicate it, you can just delete the duplicate. There are two other options for duplicating which are nice if you want to make copies with all the clips contained in the project (beware that the file size will be huge). But for just manually "saving" select the smallest option and it should save right then. The project file is the fcpcurrentversion in the Project folder. You can check the time modified of that file to see what's most current.

Similar Messages

Another workaround for Failed: 3x crash service down

For some of us still using Final Cut Pro Studio 2 with Compressor 3.5, there has only been a couple of workarounds with varied success. I stumbled across another one after spending many hours trying to convert an MPEG4 into Apple ProRes 422. (It would either loop continuously or fail. 4 other clips from the same source)
I had compressor set to "never copy files to/from cluster" and had my original clip on an exterior drive. I set qmaster to use my Mac Pro (2 Dual Core Xeon) as a virtual cluster. (See http://www.digitalrebellion.com/blog/posts/using_compressor_with_multiple_cores. html to get more info on setting that up.) As I watch the progress, I noticed that all the clips had finished transcoding then the error popped up. When I looked back on my hard drive I saw that all 8 instances were there in the correct format. I simply opened them in Quicktime 7, then starting with number 2, I copied and pasted it into number 1 window. I continued until all instances were copied into one window. I saved the movie. When I opened the movie, there was my complete clip in the correct format.
For the second clip that was troublesome I had set compressor to " copy source to cluster as needed". When I submitted it, it started copying it, then transcoding and again, when the instances were complete, then the error message. I noticed that my hard drive had lost a large amount of space so I used OmniSweep to check it out. I saw a private file was stuffed with gigabytes. I went to finder, entered the following path: </private/var/spool/qmaster> and there all eight instances. I dragged them to my external drive, then used quicktime 7 to stitch them back together.
I did test and found that this was not the case when selecting "This Computer" cluster. The scratch clip was visible unitl the failed popped up, then it disappeared. It does seem to be consisten when using a virtual cluster though.
While this does not solve the problem, it may let you get your clip and move on much faster.

This means the Compressor transcoder has crashed. A common cause of this is conflicting third-party codecs.

Failed to save deployment descriptor for: EEdnc cause: null

I am getting nowhere fast trying to deploy an ear with 1 EJB jar and a war file.
The war deploys by itself ok. So the EJB jar has 2 stateless beans and an MDB
configured for mqseries. I deployed a sample with some EJBs so the configuration
must be ok. It verifies with no errors, compiles with ejbc, javac and rmi ok. then I get
this error...
I was wondering if anyone has run into this before or if an expert knows what it is.
I have been using the admin console to deploy as well as asadmin.
\j2ee-apps\EEdnc\com\boeing\bca\ednc\ejbcontainer\services\imsaccess\_IMSAccess_Stub.class
[24/Sep/2003:10:47:33] INFO ( 1564): DPL5110: EJBC - END of EJBC for [EEdnc]
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]uid: 69758199598546944
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]desc name: BoltsReceiver
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]desc id: 69758199598546944
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]desc name: IMSAccess
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]desc id: 69758199598546945
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]desc name: JmsEjb
[24/Sep/2003:10:47:33] FINE ( 1564): [Application]desc id: 69758199598546946
[24/Sep/2003:10:47:33] FINE ( 1564): Saving the app descriptor....................
[24/Sep/2003:10:47:33] WARNING ( 1564): DPL5035:Error while running ejbc
com.iplanet.ias.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- -- Failed to save deployment descriptor for: EEdnc
cause: null
     at com.iplanet.ias.deployment.backend.EJBCompiler.wrapException(EJBCompiler.java:589)
     at com.iplanet.ias.deployment.backend.EJBCompiler.compile(EJBCompiler.java:186)
     at com.iplanet.ias.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:215)
     at com.iplanet.ias.deployment.backend.AppDeployer.deploy(AppDeployer.java:98)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:50)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:745)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:667)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.ias.admin.server.core.jmx.Introspector.invokeMethodOn(Introspector.java:188)
     at com.iplanet.ias.admin.server.core.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:137)
     at com.iplanet.ias.admin.server.core.jmx.ASMBeanServerImpl.invoke(ASMBeanServerImpl.java:222)
     at com.iplanet.ias.admin.servermodel.controllers.SOMRequestDispatcher.invoke(SOMRequestDispatcher.java:88)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceController.doDeploy(AppServerInstanceController.java:2244)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceController.deployApplication(AppServerInstanceController.java:1099)
     at com.iplanet.ias.admin.servermodel.AppServerInstance.deployApplication(AppServerInstance.java:249)
     at com.iplanet.ias.admin.server.gui.jato.DeployEARApplicationViewBean.add(DeployEARApplicationViewBean.java:111)
     at com.iplanet.ias.admin.server.gui.jato.IASViewBean.handleOkRequest(IASViewBean.java:235)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:299)
     at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:811)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:749)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:596)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:772)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:446)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(Standar
[24/Sep/2003:10:47:34] WARNING ( 1564): Deployment Error
com.iplanet.ias.deployment.backend.IASDeploymentException: Error while running ejbc -- Fatal Error from EJB Compiler -- -- Failed to save deployment descriptor for: EEdnc
cause: null

I don't remember exactly what it was, but I think it was a JNDI name. I resolved it by using
<ejb-link></ejb-link> in the ejb-local-ref in the ejb-jar.xml. I made the ejb-link match the
ejb-name in the same descriptor. This seemed to work better than changing the jndi-name in the sun-ejb-jar.xml.
One thing you can do is set the logging for server1 to finest, then bounce the server and deploy.
Shut down the server and look at the log with wordpad. Start at the bottom and work your
way up looking for stack traces. They get more and more detailed as you go up and may
point you to the exact problem. Works most of the time.

WSYNCMGR.LOG Failed to Sync Update. Failed to Save Update.

I recently had to re-install WSUS on an SCCM 2012 SP1 server which had a problem where the EULA's were not being downloaded by WSUS for any updates which needed them. Even attempting to download the updates within the WSUS console generated an error
about being unable to locate the EULA file.
I re-installed WSUS with a fresh DB, which caused SCCM 2012 SP1 to immediately expire and remove the updates it had previously synchronised. This took a horrendous amount of time (at least 6 hours) for it to process all of the changes to the packages
and deployments etc.
This did resolve the issue within WSUS regarding approving EULA'd updates, but I am now unable to perform a software updates sync with the following errors being recorded in the wsyncmgr.log;
Synchronizing update 8e6513d8-dc3a-4468-8108-d44618a6e412 - Windows Malicious Software Removal Tool x64 - January 2008 (KB890830)
Referenced configuration items are not available yet: <MissingReferences><Reference RelationType="1" ModelName="Site_7A5EE138-E14B-4A6F-A5A5-8253002809FB/SUM_2fffa61e-964e-442a-81ad-d822f55d57d8"/><Reference RelationType="1"
ModelName="Site_7A5EE138-E14B-4A6F-A5A5-8253002809FB/SUM_852c74ff-b1b6-4c4a-8490-b0b1d7296d2a"/></MissingReferences>
Failed to sync update 8e6513d8-dc3a-4468-8108-d44618a6e412. Error: Failed to save update 8e6513d8-dc3a-4468-8108-d44618a6e412. CCISource error: 2. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
These same errors occur for many updates and cause the sync to fail due to consecutive failures.
It looks to me like this MAY be happening only for Expired/Superceded updates and/or updates for which Configuration Manager has previously synchronised. A handful of updates HAVE made it into the console, but only ones never before synchronised. I
have searched for and trawled several blog posts for similar errors but these all seem to relate to errors in the objreplmgr.log and child sites - which I do not see any errors in there and this issue is with my primary site. The primary site DOES however
have two child Secondary sites, so I am wondering if there is a data mismatch somewhere.
I tried replicating the issue in my lab environment and no matter what I did, even hitting some of the tables directly to upset it, I could not replicate the problem to begin to try solutions.
I am very close to having to open up a call with MS, but wondered if anyone had any ideas?
This does raise a few questions regarding DR scenarios too - as to how important IS the SUSDB, how best and when to back it up and if it is expected behavior for SCCM to wipe out it's configuration if it is sync'd with a fresh WSUS install?
My Personal Blog: http://madluka.wordpress.com

I just can't replicate this in my lab environment, and I am thinking that this is some sort of collateral damage done by the July patch applied by the customer that breaks SQL replication and also causes WSUS Sync issues. We didn't ever remove that
patch but instead implemented the SQL workarounds but this may just have resolved 'some' of the issues the patch caused. The annoying thing is that the day we implemented the workaround and proceeded to uninstall/reinstall WSUS and resync SCCM, Microsoft
released the updated version of the patch later that day (UK time) - wonderful timing.
My Personal Blog: http://madluka.wordpress.com

Remote Desktop 3.6 fails to save sorting in client list view (on osx10.8)

Hi there,
i have sorted my controlled clients in the "all computers" section via the labels column to group them together by color.
this worked fine in older version of ard. now after upgrading from 3.5 the colors of the computers are preserved, but the column "labels" is disappearing after each restart of ard. and so the entries are always sorted alphabetically by name. I have noticed that the sorting does revert to that "standard" state
whatever the changes I make are. So I assume that ard fails to save the layout in com.apple.RemoteDesktop.plist. I have also removed com.apple.RemoteDesktop.plist from my preference folder to let it regenerate from ard, but the problem stays the same.
Has anyone filed a bugreport abut that behavior jet?
Tanks,
Ben

Hello!
Same problem here for me:
Some ARD clients behind a vpn-tunnel.
ARD admin cpmputer running 10.9.1 and ARD 3.7.1
There is no problem with clients running 10.6.8, 10.7.5 and 10.8.5 with ARD client 3.5.4, 3.7 and 3.7.1
But clients with 10.9.* and ARD client 3.7.* is it impossible to do remote control. It does not matter which color/quality mode i select. The mouse movement is extremly sluggish and lagging - it takes a few seconds until the mouse settles down - I need about 10 seconds to close a window.
Once again all clients are controlled via the same vpn tunnel from the same ARD admin-computer.
Apple has to fix it ASAP. We rely on reliable software products.
Bye,
Christoph

MDT 2012 'Failed to save Environment to (80070057) Error during Windows 7 x64 Pro Deployment

Hi There,
I've been using MDT for a little while now, but I'm having problems successfully deploying an image to a batch of new laptops. The laptop HDD's are completely blank, and I am PXE booting using an x64 Litetouch Image via WDS. I have successfully captured
my image from a reference laptop (the same model that I'm trying to image), and I am now trying to deploy it using a standard client task sequence.
The 'Install operating System' phase seems to go ok, but then sits for quite some time at the 'Applying Unattend.xml' stage, then eventually, I get a general error 'Task Sequence Failed - 80004005'. I then exit MDT (it doesn't reboot as it should), and let
the laptop boot, which it does, and logs straight on into Windows, but gives me error along the lines of 'can't find the litetouch script', which I assume means MDT hasn't been able to copy it across. The laptop is however joined to our domain, and I pretty
much just have to tick the 'require a password to log on to this computer' box in user accounts, and all looks ok.
So in summary, the image is applying, but the laptop is not rebooting and running the final cleanup scripts.
I have already changed the SATA mode to IDE, instead of AHCI, having read this sometimes causes problems. I also read that systems with UEFI BIOS can also cause problems with MDT, but I'm not sure if this is the case.
I have edited my customsettings.ini, to copy log files back to my server, which it has done for me. Having looked at the logs (with CM Trace), I can see these errors:
Failed to save environment to (80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to persist execution state. Error 0x(80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save execution state and environment to local hard disk
TSManager 26/03/2014 15:48:09
1820 (0x071C)
The task sequence execution engine can not reboot the machine because we failed to persist execution environment
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Fatal error is returned in check for reboot request of the action (Restart computer).
Unspecified error (Error: 80004005; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
An error (0x80004005) is encountered in execution of the task sequence
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Task Sequence Engine failed! Code: 80004005
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Any help you can give me would be great, as I'd like to get this process running properly.
Thanks,
Sarah

You don't mention what kind of OS this is (Windows 7 Pro x64?)
This is a known issue/FAQ.
I would recommending using MDT 2012 (update 1) for UEFI machines.
Machines with uEFI 2.3.1 only support Windows 8.x.
http://technet.microsoft.com/en-us/library/hh824898.aspx
Recomendation: Convert the BIOS to CSM and/or upgrade to Windows 8.1 :^)
Keith Garner - keithga.wordpress.com

Workaround for Invalid Certificate with Acrobat 9.0 and Adobe Reader v.7.0?

Hello!
In Adobe Acrobat 9.0 Professional, is there currently a workaround for the following scenario?:
At our company, the source document is created in Word and then a PDF document is created using Adobe v.9.0. My colleague, who uses Adobe 9.0 Professional, places a certificate in the Header of the PDF document.
When this document goes out for sign off, the users only have Adobe Reader v. 7.0. Once these users open the PDF document and try to place their signature in to the digital signature fields, the certificate in the document becomes invalid.
Is there a way to save off the PDF in v.9 in different formats (A, F, etc.).
Would saving off the PDF in another format retain the validity of the certificate in the PDF document when other users with Reader v.7.0 try to sign the document?
Thx again for everyone's help!
Susan Steen

Hi Steve,
fwiw - at the Forums' entry http://forums.adobe.com/index.jspa
there is this announcement.
Announcement: File Attachments Temporarily Disabled
Hide Details
We have temporarily disabled the ability to upload files to the forums in order to protect our customers/users from a potential security issue. Thank you for your patience while we mitigate this issue.
by adobe-admin at Feb 22, 2010 12:20 PM
So a file attachment may not be an option (?).
Be well...

"Adobe has found a solution or workaround for the recent crash in Adobe Flash CC" ...not really.

Hi guys,
My Flash CC crashes all the time, it's always been doing it since when I started using it on CS4, and I've somewhat given up on this bug being fixed, it crashes at least 20-30 times every document I create. I'm using a Wacom Bamboo Fun Pen&Touch tablet and drawing a lot, I think the problem is that it can't handle this much drawing.
Anyways, it just crashed and for the first time after reopening I found this nice message from Flash:
"Adobe has found a solution or workaround for the recent crash in Adobe Flash CC.
Please click here for further details."
Excited, I clicked on it! At last, a solution! Amazing!
...but it just points to http://www.adobe.com/
... I don't understand.
What's happening? I'm genuinely puzzled.
Also, anybody else experiencing frequent crashes?
Thanks!
Ciao!

Yes, this is not good -- you're already mad when it crashes, then "We found a solution!" But, for me clicking on the link does nothing - no link even to adobe, just a tease - nothing opens.
It's bad enough crashing a couple times a day and losing work (I do save every chance I get), but then to get taunted with this bogus message, it's discouraging and exactly the best 'user experience' for a really expensive product from company that is all about helping professionals create good design/user experience ..
I like the way this is headed though! it just doesn't work right now.

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

Aha! Workaround for site corruption in iWeb '06 '08 updates

I think I have found a workaround for a problem that's been plaguing me and no doubt other people who've bought iWeb '08 and used it to update an older site from iWeb '06 (skip to bottom for solution). This is relevant even after the 2.0.1 update that Apple shipped today.
My iWeb project contains multiple sites, which I use to group photo albums. I found repeatedly that after I updated the site, made a change, and saved the project, a lot of the bitmap image files needed for pages with photo albums or other graphical embellishments were just gone from the project. Looking into the Domain.sites package (Finder: Show Package Contents) confirmed this - all the .jpg, .png files etc. just got trashed the first time I did a save (although the pages all looked ok after the upgrade but before the save!)
At first I thought that the last site added to my multi-site project was spared at the expense of other 'sites' visible in the sidebar. Then I realized that only pages that had been viewed in iWeb after the update were spared! Generally I would view the pages in the bottom/last site as these were the ones I was currently working on - and these were spared.
So I did an experiment - I opened (yet another) copy of my iWeb '06 backup in iWeb '08, and after the update but before saving I clicked on every page (thereby viewing it) in the whole site - and I have around 50 pages in about ten sites. Then I made a change to a single page, and saved the project. The fact that I had viewed all the pages seemed to make the problem go away! There were no missing photos or embedded bitmaps!
*So the short version of the problem is:* any pages that have not been viewed within iWeb after updating a Domain.sites file (what I call the project) from '06 to '08 will have all associated bitmap image files deleted.
*The solution:* immediately after updating the site, and before making any edits or saving, you must click on the sidebar entry for every page in the whole project (to view it in the editing window). In my case this meant also clicking on every entry of a blog, to display it.
Conclusion: there must be some book-keeping of the database that supports iWeb that is not synchronized with the persistent store on disk unless a page is actually viewed.
Hope this works for others, and that Apple gets a proper fix out ASAP. The 2.0.1 update issued today did not fix the problem for me - only the above workaround did.
Rick

Hi Rick,
Sounds like my story, too. I have had some time to experiment on two different Macs (one G4 and one MacBook Pro). After losing the formatting and photos on one Mac after upgrading, I decided that I was going to test some theories on the other Mac prior to upgrading to iWeb '08. This is what I found - and what worked:
Test 1:
MacBookPro on iLife '06. I upgraded to iLife '08. I opened iWeb and noted that it did not recognize my original domain: iWeb '08 asked me to locate it or create a new one. I selected "choose" and selected the domain that I had created in iWeb '06 (user/library/application support/iweb). The site opened, performed the required update and opened up. I noticed immediately that some of the photos did not appear on some of the pages. Each time iWeb '08 was closed and reopened, more photos, sometimes different photos, would disappear. All that would remain was a grey placecard with a question mark in the middle (and the warning that the links were now missing). I even went as far as putting the photos back into position, saving and closing iWeb '08. But when I opened iWeb '08 again, the photos were missing...again.
I rebuilt the entire site.
Test 2:
Powerbook G4 on iLife '06. BEFORE updating to iLife '08, I used the original iWeb '06 to publish the entire site to a local folder on my HD (as a security measure). Next, I created a copy of my domain (another security measure) and moved the original domain from 'user/library/application support/iweb' to my desk top. I then proceeded to upgrade to iLife '08. After upgrading, I opened iWeb '08 and received the notification that iWeb '08 needed to either create a domain or I needed to choose a domain. Since I moved my domain out of 'library/application support/iweb', I elected to create a new domain and saved it to the same location (library/application support/iweb).
The new domain was created, iWeb '08 opened, I selected a template, then saved it and closed the program.
Using Finder, I examined the new domain just created by iWeb '08. Using the 'get info' command, I noticed that the new domain has the extension ".sites2." The original domain created in iWeb '06 has the extension ".sites."
I took my original iWeb '06 domain and used the finder "get info" command to manually change the extension from ".sites" to ".sites2." I got the warning asking me if I was sure I wanted to use ".sites2," and I selected yes, use ".sites2."
Using the (original) domain just modified in the last step, now with the extension ".sites2", I inserted it into the 'user/library/application support/iweb' folder, replacing the domain file created during the start up of iWeb '08.
I then opened iWeb '08.
After a brief moment, iWeb '08 opened my domain revealing all four of my original web sites, complete and intact. After iWeb '08 updated the domain, I saved it, closed iWeb '08 and reopened it a few times before I was satisfied that EVERYTHING was working fine.
In conclusion, I found that by changing the domain (created in iWeb '06) file extension to ".sites2", I was able to use iWeb '08 to successfully open it, complete and intact.
I hope you may still have the opportunity to try this on your Mac. I also hope that you have good results.
Cheers, Bryan

Suggested workaround for list itemrenderer bug?

Can someone point me in the right direction for a workaround for the problem described as Flex bug 28191:
https://bugs.adobe.com/jira/browse/SDK-28191
Steps to reproduce:
1. Populate a Tree/List with data and provide a custom itemRenderer class factory.
2. Change the class factory and dataProvider at the same time.
3. List.createItemRenderer() will crash during since Factory is the key and it has been changed.
                delete freeItemRenderersByFactory[factory][renderer];
Actual Results:
Crash because the renderer can not be found since it does not exist on that factory dictionary since the class factory was changed and the lookup is using the new factory.
Expected Results:
Not crash.
Seems like a race condition, as sometimes during this process it skips that block of code but in other cases it falls into this block and fails.
I need to change the data provider and item renderer of a tree control at runtime. Is there one or more methods I should run to prevent this? As the bug notes state, this is an intermittent problem. The error occurs here:
if (factory == itemRenderer)
            if (freeItemRenderers && freeItemRenderers.length)
                renderer = freeItemRenderers.pop();
                delete freeItemRenderersByFactory[factory][renderer];

Thanks. Actually, I have been updating (not setting or changing) the tree's dataprovider, and then changing the classFactory like this:
processesXML = event.result as XML;
nodeTreeData.source = processesXML.children();
if (treeMultiSelect)
nodeTree.itemRenderer=new ClassFactory(renderers.TreeItemRendererV1);
nodeTree.allowMultipleSelection = true;
nodeTree.setStyle("selectionColor", "0xFFFFFF");
nodeTree.setStyle("disclosureOpenIcon", MinusIcon);
nodeTree.setStyle("disclosureClosedIcon", PlusIcon);
else
nodeTree.itemRenderer=new ClassFactory(mx.controls.treeClasses.TreeItemRenderer);
nodeTree.allowMultipleSelection = false;
nodeTree.setStyle("selectionColor", "0x7FCEFF");
nodeTree.setStyle("disclosureOpenIcon", OpenArrowIcon);
nodeTree.setStyle("disclosureClosedIcon", ClosedArrowIcon);
I had tried using validateNow after changing the ClassFactory before but did get the error again. I will try it again but update the data provider after. Since it's an intermittent error I'm finding it hard to know if a fix is really working.

" FAILED TO SAVE DOCUMENT" " NOT SUPPORTED"

I have a Crystal Report that I have worked on for serveral hours and that I have saved throughout the day; however, when I try to save it now, I get the following error:
" FAILED TO SAVE DOCUMENT" I hit OK and then the following appears.
" NOT SUPPORTED"
I am not able to save it anywhere or rename it.
Has this happened to anyone else?

Hello,
Typically when you get permission issue it's due to file system permissions, registry permissions or even WEB access. Open up Crystal Designer and check off the option for updates. Firewalls and anti-virus software can cause access issues also. This is not a CR issue but some permission problem and there can be many sources causing Cr to fail like this. Depending on the OS it can also be read/write permissions on the folder you are trying to save to.
Make sure you are a local PC administrator and have full rights to install software. If you have an IT department check with them to verify they have not pushed out Profile updates to modify your permissions, you may be an Administrator but IT may have altered the default permissions.
There are also install issues affected by DEP, Firewall and Anti-virus software, thus the warning about disabling all applications when installing. Quite often also doing a Repair install from Add/Remove programs will resolve issues, in your case Disconnect from the network by disabling your network card and then stop the firewall and and Anti-V then do a repair install.
Now test your report by saving it locally, do not save it to a network share and see if that works. If it does then start up your firewall and anti-V and then re-connect to your network and test again. If it now fails look at configuring those security suits to allow CR full access to the network, system resources and WEB.
Removed registry to clean up formatting:
Other tools are ProcessMonitor, add crw32.exe to the filter and then when you try to save the report watch the logs to see what Access Denied notes are logged. This should tell what you need to add to your system to get full access.
There are 1000's of users who do not have this problem and only a few who do so it's not likely a CR issue.
Thank you again
Don
Edited by: Don Williams on May 13, 2010 8:29 AM

Failed to save xsl map

I see a few people asked about this problem. do you have a solution yet?
I tried to use Transform Activity in BPEL 10.1.3 Developers Preview. I am not able to create any transformation. It keeps giving me this error:
"Failed to save XSL map. Make sure XSL map is valid".
I think the problem is in the section of <?oracle-xsl-mapper> .. <?>, because if I remove this section , the bar in the right side of the panel changed from red to green, but this section is generate by Jdev , even if you remove it, Jdev will put it back. What should I do?
Message was edited by:
user531689

Hello,
I have the same problem with the mapping tool. I'm using
jDeveloper 10.1.3.1.
BPEL Designer 10.1.3.1.0 (Build 061009.0802)
BPEL Process Modeler oracle.bpm.modeler 10.1.3.1.0.061009.0802 Loaded
XSL Mapper oracle.bpm.mapper 10.1.3 Loaded
It's a very strange probleme because it's working in an other laptop with the same configuration. I made the ORDER BOOKING tutorial and I'm hiting up when i Created the Mapping File ("TransformOrder" BPEL Service). (section 8.7.6)
Thanks a lot for helping me.

Unexpected Getty restart: systemd-logind[272]: Failed to save...

Hi,
I was just now minding my own business, surfing the web, when mouse got really laggy, and all of a sudden X11 cut out and I was staring at my tty1 login prompt. I logged back in and checked /var/log/everything.log to find this:
Oct 25 08:23:33 localhost systemd[1]: [email protected] holdoff time over, scheduling restart.
Oct 25 08:23:33 localhost systemd[1]: Stopping Getty on tty1...
Oct 25 08:23:33 localhost systemd[1]: Starting Getty on tty1...
Oct 25 08:23:33 localhost systemd[1]: Started Getty on tty1.
And I checked /var/log/errors.log to find this:
Oct 25 08:23:30 localhost systemd-logind[272]: Failed to save seat data for seat0: No space left on device
Oct 25 08:23:30 localhost systemd-logind[272]: Failed to save session data for 2: No space left on device
Oct 25 08:23:30 localhost systemd-logind[272]: Failed to save user data for brian: No space left on device
I'm not sure where systemd-logind saves "user data", but none of my devices are full:
~ $ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 14G 3.5G 9.6G 27% /
dev 984M 0 984M 0% /dev
run 987M 340K 986M 1% /run
/dev/sda2 14G 3.5G 9.6G 27% /
tmpfs 987M 0 987M 0% /dev/shm
tmpfs 987M 0 987M 0% /sys/fs/cgroup
tmpfs 987M 8.0K 987M 1% /tmp
/dev/sda4 205G 45G 150G 23% /home
/dev/sda3 12G 2.8G 7.7G 27% /var
/dev/sda1 92M 26M 62M 30% /boot
Any idea what happened? The only thing I can think of is that somehow /tmp got full (even though I wasn't doing anything other than normal web browsing), so it restarted and dumped the contents of /tmp.
Thanks.
Brian

Hi,
I was just now minding my own business, surfing the web, when mouse got really laggy, and all of a sudden X11 cut out and I was staring at my tty1 login prompt. I logged back in and checked /var/log/everything.log to find this:
Oct 25 08:23:33 localhost systemd[1]: [email protected] holdoff time over, scheduling restart.
Oct 25 08:23:33 localhost systemd[1]: Stopping Getty on tty1...
Oct 25 08:23:33 localhost systemd[1]: Starting Getty on tty1...
Oct 25 08:23:33 localhost systemd[1]: Started Getty on tty1.
And I checked /var/log/errors.log to find this:
Oct 25 08:23:30 localhost systemd-logind[272]: Failed to save seat data for seat0: No space left on device
Oct 25 08:23:30 localhost systemd-logind[272]: Failed to save session data for 2: No space left on device
Oct 25 08:23:30 localhost systemd-logind[272]: Failed to save user data for brian: No space left on device
I'm not sure where systemd-logind saves "user data", but none of my devices are full:
~ $ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 14G 3.5G 9.6G 27% /
dev 984M 0 984M 0% /dev
run 987M 340K 986M 1% /run
/dev/sda2 14G 3.5G 9.6G 27% /
tmpfs 987M 0 987M 0% /dev/shm
tmpfs 987M 0 987M 0% /sys/fs/cgroup
tmpfs 987M 8.0K 987M 1% /tmp
/dev/sda4 205G 45G 150G 23% /home
/dev/sda3 12G 2.8G 7.7G 27% /var
/dev/sda1 92M 26M 62M 30% /boot
Any idea what happened? The only thing I can think of is that somehow /tmp got full (even though I wasn't doing anything other than normal web browsing), so it restarted and dumped the contents of /tmp.
Thanks.
Brian

Workaround for IE active content problem?

Adobe
posted
a workaround for existing web pages to respond to the change in
IE that requires users to manually activate Flash content. I tried
doing the same document.write in an external file for the HTML
files FlashHelp generates wherever I found the <object> and
<embed> tags, but I get a script error ("Object expected") in
the lines where I call the function. (The solution worked for me in
simple HTML pages with Captivate movies, so I know it can work.)
The only reason I can think of that it won't work is that the
scripts are concatenating strings, not just showing a movie where
the <object> and <embed> tags are. Has anyone found a
workaround for FlashHelp so users don't have to manually activate
the top and left panes? I put in a "wish" for Adobe to provide a
solution on the site and later in an update or new version of
RoboHelp (which is another issue in and of itself), but who knows
when the developers will be able to come up with it. Thanks!

Thanks for asking, Mimi. Here are more specific steps:
1. Open Notepad or another program for creating text files.
2. Create two functions. For example:
function insertMaster1() {
function insertMaster2() {
You can call your functions anything you want, but the names
must be different. Note that for the moment, they're empty, but
we'll change that in a minute.
3. Save the Notepad file with a JS file extension (for
example, runactive.js). In Notepad, specify “All Files”
for “Save as type” so that it doesn’t save as a
TXT.
4. When you generate your FlashHelp system, it creates a
bunch of HTM files containing JavaScript in the destination folder
you specified when generating your output. Locate wf_master.htm and
wf_navpane.htm in the output folder. (If you leave RoboHelp to use
its defaults, it puts your help system in an !SSL!/FlashHelp
directory within your project folder.)
5. Open wf_master.htm.
6. In the <head> tags, insert a line that references
your JS file:
<script language=“JavaScript”
src=“runactive.js”></script>
7. Find the lines in the code that look like this:
// Insert the “Master” SWF
8. Highlight everything AFTER this commented-out block until
the </script> tag. The last thing you highlight should be
"document.write(strObject);".
9. Cut the highlighted code and paste it into the first
function in your JS file so it looks like this:
function insertMaster1() {
// Build up the variable string we will be sending
strFlashVars = "uniqueHelpID=" + parent.UniqueID();
……(more code)
document.write(strObject);
10. In the place where you just cut all that code out of
wf_master.htm, insert a call to the function:
insertMaster1();
That’s all you need because all that code you just
moved was already in <script> tags in the HTM file. The
</script> tag should come immediately after this function
call.
11. Open wf_navpane.htm.
12. Repeat steps 6 – 10 for wf_navpane.htm. The code
we’re concerned with in this file looks almost exactly like
that in wf_master.htm, but there are a few lines less this time.
Put the code you take out of wf_navpane.htm into the second
function in your JS file. Where you cut out the code from
wf_navpane.htm, put a call to the second function (it should come
right before the end of the <script> tags):
insertMaster2();
13. Save your JS file and the two HTM files.
14. Whenever you re-generate your output, RoboHelp is going
to erase your new versions of these HTM files and create its own
again. Copy your new versions of wf_master.htm and wf_navpane.htm
to another location (can be a folder within your output folder).
Now you have them so you can paste them back over RoboHelp’s
versions each time you finish generating your output. For example,
I would stow my wf_master.htm and wf_navpane.htm in a folder called
"drop files." Then, after I get done generating my output, I copy
those files and paste them in the output folder, letting them save
over the ones that RoboHelp created.
15. To test it once you've finished the swap, find the HTM
file in your output folder that is named after your project. For
example, if my project is called flying_monkey, I would find
flying_monkey.htm. Open this HTM file in Internet Explorer, and you
shouldn’t have any messages telling you that you have to
press Enter or Spacebar or click on the panes to activate them.
This runs from the same basic idea as Adobe’s
workarounds for Flash—we’re going to a file external to
the HTM files for the active content tags. Hope you find this
useful! Let me know if you run into any problems.
--Ben

Workaround for Fail to Save?

Similar Messages

Maybe you are looking for