Workaround for internet access that needs to 'log in'??

Hi, I recently got internet service (Consolidated Smart Systems) in my apartment. The trouble is that I need to enter a username and password each time I want to use the internet. Think of it like accessing the internet in Starbucks. Of course this means that Apple TV can't access the internet.
I was hoping there was some work around solution... I have an iMac that I leave always on and therefore I don't need to enter the username and password to keep the internet connection on. I also have an Airport Extreme. Is there someway I can setup Airport Extreme to have the login details in it so then the Apple TV won't have to log in?
Don't know if this is clear but would appreciate any help!

Guess not... have to get a different internet service provider!

Similar Messages

  • Using 2nd Built-In Ethernet port for internet access?

    Hello,
    I have a Quad-G5 running 10.4.8. In its current configuration, all its network communications, including web access, go over the active ethernet port (Built-in 1).
    Does anyone know how I could use the second built-in port for internet access only? I'd like to route local traffic over the first port, but go "out" over the second.
    The machine is on a corporate network, and proxy access is slowwww. I have the ability to use a direct connect to the internet, but still need to be connected locally. Any thoughts? Many thanks . . . JD

    Easy. Go to System Preferences > Network > Network Port Configurations and drag the port connected to the internet to the top, so that it has priority over the port connected to your LAN. This prevents DNS time-out when loading a website, but still allows LAN traffic over the other port because that traffic is most likely going to use ARP rather than DNS. For good measure, you can add your company's domain (such as "my_company.lan") to System Preferences > Network > Internal_Ethernet > TCP/IP > Search Domains.

  • How many ghz should I get if I plan on using my IPAD2 for internet access, email, facebook and games for my children?

    How many ghz should I get if I plan on using my IPad2 for internet access, email, facebook and games for my daughters children?

    Ghz is the CPU speed and that is fixed for each iPad model.
    The GB is the number of Gigabytes of storage.
    I had a 32G iPad1 and filled it up with 5000 songs, 20,000 photos and about 50 apps.  It doesn't sound like you will need anything larger than that.  If you are just talking about a few dozen apps and email, the 16G version should be adequate.

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • I have to restart ipad each time for internet access.  Why?

    I have to restart ipad each time for internet access and some games.  Never happened until about 2 weeks ago.  ?

    Firefox is a browser: it doesn't require you to 'sign in'.
    It sounds to me like you have some kind of malware installed if you're required to 'sign in' every time you use it.
    I'd recommend you use Internet Explorer (''assuming that doesn't require you to 'sign in' too'') to go to http://www.malwarebytes.org/ and download the free version. It will quarantine any malware it finds so restart Firefox afterwards to see whether the problem recurs or not.

  • Can I hook up a windows computer to my airport time capsule for internet access?

    We have hooked up our time capsule for the first time today.  It works wonderful on our apple products BUT can I connect a windows based computer to it for internet access? 

    Yes. Both Ethernet and 802.11 are cross-platform.
    (109122)

  • User Authentication for Internet access

    Hi,
    Is it possible to configure authentication for internal (LAN) users to Authenticate (local/RADIUS/LDAP) for any kind of internet access through the ISA550/570? (like cut-through authentication proxy in ASA.)
    And Can the ISA550/570 act as a Web proxy?
    Thanks in advance.

    HI Sulu,
    You can configure captive portal for internal LAN users to authenticate (local/Radius/LDAP) for internet
    access through ISA500. (see attached screenshot)
    ISA500 cannot act as a web proxy. what is your use case ?
    Regards,
    Wei

  • Vrf for Internet Access

    Hello,
    i'd like to configure a dedicated vrf for Internet access only. On my CE router i configured three vrf (Internet, red and blue) in the vrf internet i import the route target from blue and red, and the vrf blue and red i import only the default route. Everything is working fine, only one thing bothers me, i can ping from the vrf red destinations in the vrf blue and vice versa. How can i prevent this routing?
    thanks in advanced.
    Alex
    here the config of my router.
    ip prefix-list internet seq 5 permit 0.0.0.0/0
    route-map internet permit 10
    match ip address prefix-list internet
    set extcommunity rt 100:200
    ip vrf internet
    rd 100:100
    route-target both 100:100
    route-target import 100:110
    route-tarbet import 100:120
    export map internet
    ip vrf red
    rd 100:110
    route-target both 100:110
    route-target import 100:200
    ip vrf blue
    rd 100:120
    route-target both 100:120
    route-target import 100:200

    Hi Alex,
    Given the FW is the next hop for the default route, the traffic from one vrf to the other goes through the FW and get routed back to the CE and then to the respective vrf router. You could add the rules on the FW to prevent
    traffic being routed between FW.
    Regards

  • I have MacBook Air MD232 2012. I am working for a company that needs me to install all OS X from 10.7 to 10.10. How can I do this on my MBA? Thank you for your kind help.

    I have MacBook Air MD232 2012. I am working for a company that needs me to install all OS X from 10.7 to 10.10. How can I do this on my MBA? Thank you for your kind help.

    Choose Utilities from the Finder’s Go menu, open the Disk Utility, create two or three additional partitions(see below), and install or clone a different Mac OS X version to each.
    Unless you previously downloaded Mavericks 10.9, it’s no longer available.
    (120302)

  • Can tata photon plus be used with apple i pad mini for internet access

    can tata photon plus be used with apple i pad mini for internet access?

    No, you will not be able to use a wired connection. If you have a iPad wifi, it can be used only with a wifi and if you have a iPad wifi+cellular, it can be used with both wifi and 2G/3G and 4G.

  • Have a static IP for internet access - how do I replace my Linksys wireless router with Time Capsule?

    Have 5 macs on an ethernet network - some wired and some wireless to a Linksys router.  My provider uses static IP and DSL for internet access.  I am replacing an existing Linksys router with the Time Capsule.  The Static IP settings I have are IP address, Gateway, Mask, primary DNS and secondary DNS.  The Airport Utility is not as straight forward as the Linksys setup.  There is not a place to list gateway.  Consequently I am unable to connect to the internet and am back on the Linksys router until I get this resolved.  Any suggestions would be much appreciated !

    You enter the static public IP address info on the TCP/IP tab within the Airport Utility. For a static address, use Configure IPv4 = Manually. You use the Router field for the Gateway address.

  • Just ordered new iMac do I still need a modem/router for Internet access

    Just  converted to apple,ordered a new IMAC but little confused on Internet access.
    does the extreme still need a modem/router,just a little confused after reading all the comments about poor connections etc.
    Old windows soldier sorry if a little vague .

    The AirPort Extreme is a router, but it is not a modem. You still need your existing cable or DSL modem. That device is usually supplied by your ISP and may or may not include the functions of a router.

  • I created a wireless network with my Time Capsule but would like to connect this network to a WiFi Hotspot for Internet Access

    I have created a Wirelss Network at home with the Time Capsule and would like to connect this network to the Internet.
    I can't use LAN Cable to connect to it anything becasuse I usually use the WiFi that runs through my building.
    Can I connect the Time Capsule to the WiFi hotspot somehow so that all computers on my network have Internet access and if so, what do I need?
    I need this done because the computers can only be connected to either the WiFi network or to my Time Capsule Network at any given time.
    Or is there a way to be connected to both networks simultaneously?
    I have two PC's and two Macs.
    Thank you for any support and I apologise for my ignorance. I am not too good with networking.
    I have tried the silliest of things like connecting a router to the TC only to then realise that the TC had an inbuilt router.
    I tried connecting a USB WiFI adapter to the USB Port on the TC but it doesnt detect it that way apparently.
    Please help!

    I have a kinda same problem @ https://discussions.apple.com/thread/3531642
    Please reply (somebody)!
    JeremyZ

  • ITunes match, Internet Access really needed??!!

    iTunes Match says it requires internet access, so what if you live in the city and take the train where there is no internet access, does that mean you can't listen to music?

    1. Using the SSL cert in the TMG for external connections, and using HTTP between TMG and SP is perfectly fine (though you should be aware that TMG is being EOL'ed)... it provides SSL offloading. But I'm not sure why you've got an internal self-signed cert,
    and why it's in the IIS bindings...
    2. If you're expecting INTERNAL users to access SharePoint over HTTPS, then the TMG isn't doing SSL offloading, it's just spending CPU cycles translating between certs for no good reason.
    3. Extending the web app should NOT be necessary... this process will create a SECOND IIS site for the SAME content database, but will use the DIFFERENT settings in the web.config (things like authentication, policies, etc)... it generates a LOT more hassle
    than it's worth, and is rarely necessary.
    Assuming internal users access over HTTP (not HTTPS), ditch the cert on the SP box... confirm that it works as it should internally... TMG keeps the SSL cert, and should map HTTPS external to HTTP internal... and depending whether external and internal users
    are hitting SP with the same name (FQDN vs hostname), you may or may not need an AAM - I would recommend FQDN for all cases.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Setting up a Router & Switch for internet access

    Hi all,
    I need help setting up internet access on my cisco router.
    It's a Cisco 2600, this is the setup.
    I have a Cisco 3560 switch, and 5 clients connects to this switch.
    I have one vlan defined VLAN 5.
    I have a trunk port between the router and the switch.
    My question is how to setup internet access between my switch and router?
    Please if you can send config commands? I am not that fimiliar with router setup.
    I know I need to setup a routing protocol, but need to know the command for that.

    Hi,
    You need to nat on the 2600 router and you need a default route on the router.
    How is router connected to WAN ?
    Have you got multiple vlans on the switch? Is the switch doing routing or is it Layer2 ?
    Post your config so that we can give you the missing commands
    Regards
    Alain
    Don't forget to rate helpful posts.

Maybe you are looking for

  • Creating a URL Link that opens in a new Window

    HI all, Is there a way in Captivate 3 to have the user click an object that opens a URL in a new window?  By doing this the user can then close the new window and return to the CBT where she left off.  Right now, the URL opens in the same window and

  • Can´t change options like "ignore...younger than one week" cause grayed out

    Does anyone have an idea, how I can update my Sony Ericcson D750 with all contacts, not only the old ones? When I open the preferences for my phone, all checkboxes are grayed out, so I can´t change the default setting, which ignores everything older

  • When moving notes, iPod not found

    Hello, I like to put notes on my 4th gen iPod by dragging them into the notes folder under the iPod shown in My Computer. Unfortunately, this icon is only there when I'm syncing my music in iTunes. So, for every note I want transfered I have to click

  • Persisting text into a BLOB

    Hi, We have a BLOB column that is used to persist binary and text (each row has one or the other). I am not sure about how Oracle behaves whenever a piece of text is persisted as a BLOB. Lets assume we have an application using a character set C1 and

  • FormCalc error...will attach form.

    This form was generated using a template so the table was already there. I cant get it to calculate the amount column. Can someone please help me....I will attach the form if someone could fix it and send it back with explanation.......