Workaround instead of Upgrading Exchange 2010 Severs to SP3
Hi
I have a customer in an exchange 2010 environment who has 4 exchange servers in place with DAG and NLB setup. We plan to go ahead with a Hybrid setup however just need to clarify if there is any workaround that we could apply instead of having to upgrade
there exchange server to 2010 SP3?
Thanks & Regards
Aaqib
Hi,
I notice that you want to deploy hybrid environment, and don’t upgrade to Exchange 2010 SP3.
Depending on the Microsoft document, Exchange 2010 SP3 support hybrid deployment with Exchange 2013 CU1 or later version, however Exchange 2010 SP1 and SP2 are not supported.
More details about Hybrid deployment prerequisites, for your reference:
https://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Best Regards,
Allen Wang
Similar Messages
-
Upgrade Exchange 2010 SP2 to SP3 getting fail
Hi,
I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
Preparing Exchange Setup
Copying Setup Files COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Organization Checks
FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
Language Pack Checks
COMPLETED
Hub Transport Role Checks FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
Client Access Role Checks FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Thanks,
SanHi,
Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
on domain controller holding schema master role.
Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Upgrade From Exchange 2010 SP1 to SP3 - Schema Upgrade Question
Hello,
We're currently running Exchange 2010 SP1 in our environment and want to upgrade to SP3. I just had a couple of questions related to preparing AD for this new SP that I was hoping that someone could answer.
Setup
We have a single forest with two domains within it (A and B for example). The schema master is in Domain A but this domain doesn't contain any Exchange 2010 servers. Domain B contains our 2010 CAS and Mailbox servers.
Both domains have Windows 2003 SP2 domain controllers.
I understand that before I proceed with the upgrade to SP3, I first need to update the AD schema on our schema master. I was planning on doing the following :
Log onto an existing Windows 2008 R2 64 bit "member" server in domain A (containing the schema master) with an account which is a member of the Schema Admins and Enterprise Admins groups.
Run SETUP.EXE /PrepareAD.
Do I need to also run SETUP.EXE /PrepareDomain on domain A as well or does the /PrepareAD sort this out ?
I was then going to turn my attention to domain B (which contains the 2010 CAS and Mailbox servers) and do the following :
Log onto an existing Windows 2008 R2 64 bit 2010 Mailbox server with an account which is a member of the Domain Admins and Enterprise Admins groups.
Run SETUP.EXE /PrepareDomain
Is this the correct procedure to follow ? I assume that I can then go ahead and start to upgrade the Exchange 2010 SP1 servers in the following sequence :
CAS\HUB Server(s)
Mailbox Server(s).
Clarification on the AD upgrade steps would be appreciated.
Thanks
MarkThis has all the info you need:
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Prepare Active Directory and Domains
and
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
Note: There is no harm in simply running setup/PrepareAllDomains.
You should break out each Prep step since you have multiple domains:
setup/PrepareSchema
setup /PrepareAD
setup /PrepareAllDomains
you can run all of these from the same DC you run the setup/PrepareSchema step!
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
After upgrading Exchange Server 2007 to SP3 with update rollup 13, OWA not working
Hi,
We have just installed Service Pack 3 and update rollup 13 on our Exchange Server 2007, but unfortunately our OWA has gone inaccessible.
PROBLEM- The following error comes up when we try to access OWA :
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication()
Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart(Object sender, EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders(ADSystemConfigurationSession session, ADObjectId[] pfdbIds, Boolean& allLegacy, Boolean& allLater)
Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor(ADSystemConfigurationSession session, String virtualDirectory, String webSiteName, ADObjectId distinguishedName, Boolean isPhoneticSupportEnabled)
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration()
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
ACTION TAKEN SO FAR :
1. Removed OWA virtual directories and recreated them again.
2. IIS has been reset.
3. Restarted the HUB/CAS server.
4. Created public folder database.
Even after doing all these activities, owa is still inaccessible. Please help.
Regards,
AnkurHi Ankur,
From your description, you can't access to OWA after upgrading Exchange server 2007 to SP3 rollup 13. Firstly, please locate to C:\ExchangeSetupLogs and make sure that it is a successful installation. If not, this issue often occurs.
If it is a successful upgrading, please follow the steps below for troubleshooting.
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM
Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DKHello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help! -
Upgrade Exchange 2010 from SP2 to SP3 RU4
Hi All,
We are planning to upgarde Exchange 2010 SP2 servers with stretched dag across 2 AD sites to SP3 RU4.
I have few questions.
1. We are planning to Upgrade HUB/CAS servers in both the sites in first week.
2. Then we are planning to upgrade mailbox servers in the next week in both sites.
3.
Do you think this is a good approach. Can some one please share best pratices document as we are using F5 load balancing.Hi,
Vishwanath's suggestions are pretty helpful. Besides that, we should make sure that the update process should be managed to prevent all of the DAG members from being offline at the same time.
Here is an article about how to install Update Rollups on Database Availability Group Members for your reference.
Installing Update Rollups on Database Availability Group Members
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
SBS 2011 and upgrading Exchange 2010 to enterprise
Hi All,
We have A client running exchange 2010 on sbs 2011.
The client would like to upgrade to exchange enterprise so in place archiving can be used.
Can someone tell me if this can be done with our current install - and what it is I need to purchase to allow it do be done.
As I said above its exchange 2010 running on SBS 2011. Outlook 2013 and 2010 is used.
I'm sure this has already been asked at some point, but i just need a clear answer of what my next step is.
Thanks in advance.Hi:
You need to purchase Enterprise CALs and key in the quantity and license number:
http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
You only are required to do this for the users that want/need the additional features.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit. -
Cannot install KB982867 while trying to Upgrade exchange 2010 to SP3
I just had to reinstall Server 2008 standard with Exchange 2010. I am now trying to install SP3 on Exchange and got all the hotfixs but the KB982867. I go to the link on the install screen and it take me to a Archive page. I did find on the web a download
for the hotfix but it will not install. It turns out to be net frame works 4.0. This is the message I get. KB2532942 does not apply, or is blocked by another condition on your computer. I currently have installed net frameworks 3.5 SP1 and 4.5.1 . This
is the message I am getting during the install. Client Access Role Prerequisites
Failed
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp
Elapsed Time: 00:00:14
Thanks
ZmanHi Zman,
Before you install KB2532942, you must have the .NET Framework 4 installed to apply this hotfix rollup.
The related KB for your reference:
Hotfix rollup package 2532942 is available for Windows Communication Foundation for the .NET Framework 4
http://support.microsoft.com/kb/2532942
If you have any further questions, please do not hesitate to post back.
Best regards,
Eric -
Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation
I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says:
Error:
The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 EnableServices Critical" was run: "AuthorizationManager check failed.".
The WMI service is being disabled and not starting back up after, causing the error. I have tried the following:
-Confirmed that the ExecutionPolicy is set to undefined/unrestricted for the localmachine
-Confirmed no GPO exists in our domain to restrict this
Every single time I run the install the WMI service switches to disabled and the localmachine Execution Policy is switched to RemoteSigned.
I have tried the Google search steps except for the Setup /M:Recoverserver since I really don't know what that would do to our Exchange environment. I have seen some posts that the Exchange 2010 MGMT tools are not supported on Win 8, which I find hard to
believe. I get no unsupported error just this incredibly frustrating error.
Any ideas?What you are doing is totally unsupported:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
By the way, Exchange 2010 sp1 and SP2 are no longer supported, the minimum supported is SP3.
http://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks. -
Upgrade Exchange 2007 sp1 to sp3
Good day,
I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
that - " Organization Checks ......................... FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Hub Transport Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Client Access Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Mailbox Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
Regards,
BrianGood day,
I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
that - " Organization Checks ......................... FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Hub Transport Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Client Access Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
Mailbox Role Checks ......................... FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have not been created, and setup cannot cre
ate them because the local computer is not in the same domain and site as the sc
hema master. Run setup with the /prepareAD parameter on a computer in the domai
n toyota and site Default-First-Site-Name, and wait for replication to complete.
My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
Regards,
Brian
Prepare the domains as required. You have to prep the forest first for SP3 before upgrading Exchange itself
Follow all the instructions
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Prepare Active Directory and Domains
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Hello,
I am running a windows SBS 2011 standard system and there was currently an update for Exchange 2010 Rollup 2 Service Pack 3 and it keeps failing. It says that it cannot find the installation package (exchangeserver.msi) and it is looking for it
in E:\Software\Exchange2010-SP3-x64\ folder but there never was this folder. There is only an Exchange2010-SP3-x64.exe file.
The only exchangeserver.msi file that I find on the server any where is in C:\ProgramFiles\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1 but it won't accept it (says not authorized for this update or something alike).
Please help. It is currently causing issues with email. Some of the features are not working because it says exchange is currently under maintenance.
Any suggestions would be greatly appreciated. Thank you.Susan you are correct: After I installed Exchange 2010 SP3, I deleted the msi just to "clean up' my hard disk... While trying to install Rollup 2 for SP3, the installer is trying to find it. I downloaded the installer, used 7-zip to get
the msi and I pointed the installer to it when asked.
The installation failed 3 times...
NOTE: I was using WSUS to install the Rollup: I downloaded the Rollup installer and I executed: I could see where the installer was hanging up! First it asked me to stop an SBS service and something else (sorry I do not remember), I stopped
the services and installation continued. Then it asked me for more files from the SP3 installation which I found on the installation folder that I created with 7-zip. I copied to the path that the installer was looking and installation finished
(finally!)...
NOTE 2: If you have any firewall appliance that denies Internet access to un-authenticated requests, you better turn that rule off because the installer accesses the internet (not sure why - probably for Dot Net assemblies)...
Susan THANKS for all your help to the community! You have helped so much!
All the Best
Constantine -
Updating Exchange 2010 SP2 to SP3
Hi,
I'm trying to migrate our Exchange 2010 to Exchange 2013 to different server but first I need to update it. I managed to update from SP1 to SP2 without any major problems but now I'm trying to update form SP2 to SP3.
Update fails when it goes to Client access role phase. In ExchangeSetup log I have following error messages:
[07.03.2014 07:39:27.0982] [2] Active Directory session settings for 'precompile-ManagedBinary' are: View Entire Forest: 'True', Configuration Domain Controller: 'MASTER.domain.local', Preferred Global Catalog: 'MASTER.domain.local', Preferred Domain Controllers: '{ MASTER.domain.local }'
[07.03.2014 07:39:27.0982] [2] Beginning processing precompile-ManagedBinary -BinaryName:'C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe'
[07.03.2014 07:39:27.0982] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe with arguments: install "C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe" /queue /nologo /verbose
[07.03.2014 07:39:28.0247] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:28.0263] [2] Process standard error:
[07.03.2014 07:39:28.0263] [2] Process standard error: Retry(1/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:29.0292] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:29.0292] [2] Process standard error:
[07.03.2014 07:39:29.0292] [2] Process standard error: Retry(2/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:30.0322] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:30.0322] [2] Process standard error:
[07.03.2014 07:39:30.0322] [2] Process standard error: Retry(3/3): exception: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.addressbook.service.exe
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
[07.03.2014 07:39:31.0367] [2] Process standard error:
[07.03.2014 07:39:31.0367] [2] [ERROR] Unexpected Error
[07.03.2014 07:39:31.0367] [2] [ERROR] Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [2] Ending processing precompile-ManagedBinary
[07.03.2014 07:39:31.0367] [1] The following 1 error(s) occurred during task execution:
[07.03.2014 07:39:31.0367] [1] 0. ErrorRecord: Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [1] [ERROR] The following error was generated when "$error.Clear();
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.exchange.addressbook.service.exe");
precompile-ManagedBinary -BinaryName $fullPath;
" was run: "Process execution failed with exit code -1.".
[07.03.2014 07:39:31.0367] [1] [ERROR] Process execution failed with exit code -1.
[07.03.2014 07:39:31.0367] [1] [ERROR-REFERENCE] Id=AddressBookComponent___6f3e1aaa7a2d468a9f3e83382ec479b2 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[07.03.2014 07:39:31.0383] [1] Setup is stopping now because of one or more critical errors.
[07.03.2014 07:39:31.0383] [1] Finished executing component tasks.
[07.03.2014 07:39:31.0383] [1] Ending processing Install-ClientAccessRole
I have tried couple of times and rebooted the server without success. Any help?
Thank you.Hi,
I'm running SBS2011 and was not able to use ExBPA.
I ended to create new domain + exchange to my enviroment since I had backed up data from server previously.
Thank you -
Exchange 2010 SP2 to SP3 Powershell script execution policies
Hi,
I have broken Labs when installing service packs on exchange 2010 servers because the powershell execution policies have been incorrectly configured. Once the WMI service has been stopped, the scripts within the SP haven't been able to start it up again.
I can't find any info on Powershell script execution policies in relation to the SP3 for 2010 prerequisites. Does anyone know what they should be set at? And why haven't these been at the top of the list of prerequisites for installations of service packs
for exchange?Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support -
Exchange 2010 SP2 to SP3 upgrade fails on Client Access Role
Hello,
I have searched everywhere and cannot find any answer to my problem. We have 1 Exchange server with all 3 roles installed and during the upgrade from SP2 to SP3 the server fails during the Client Access Role with the following error:
Error:
The following error was generated when "$error.Clear();
Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
" was run: "Invalid URI: The format of the URI could not be determined.".
Invalid URI: The format of the URI could not be determined.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.2.247.1&e=ms.exch.err.Ex88D115&l=0&cl=cp
here is more info from the ExchangeSetupLogs
[10/09/2014 09:26:07.0463] [1] Executing:
Get-ClientAccessServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
[10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Get-ClientAccessServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.DOMAIN.local', Preferred Domain Controllers:
'{ ADROOT.DOMAIN.local }'
[10/09/2014 09:26:07.0463] [2] Beginning processing Get-ClientAccessServer -Identity:'EXCH2010.DOMAIN.local'
[10/09/2014 09:26:07.0463] [2] Active Directory session settings for 'Add-ADPermission' are: View Entire Forest: 'True', Configuration Domain Controller: 'ADROOT.DOMAIN.local', Preferred Global Catalog: 'ADROOT.tioh.local', Preferred Domain Controllers: '{
ADROOT.DOMAIN.local }'
[10/09/2014 09:26:07.0463] [2] Beginning processing Add-AdPermission -User:'S-1-5-20' -ExtendedRights:'Exchange Web Services Token Serialization'
[10/09/2014 09:26:07.0479] [2] Searching objects "EXCH2010.DOMAIN.local" of type "Server" under the root "$null".
[10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
[10/09/2014 09:26:07.0479] [2] Previous operation run on domain controller 'ADROOT.DOMAIN.local'.
[10/09/2014 09:26:07.0479] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[10/09/2014 09:26:07.0510] [2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Invalid URI: The format of the URI could not be determined.
[10/09/2014 09:26:07.0526] [2] [ERROR] Invalid URI: The format of the URI could not be determined.
The article it references doesn't exist and I cannot find anything related to this error searching the web.
Please help!
NJVHi NJv7300
Thank you for your question.
By your state, I know you get error when you use Get_ClientAccessServer. I think it caused by AutoDiscover, you can check it.
You can refer to the following link:http://www.shudnow.net/?s=autodiscoverserviceinternaluri
You can refer to the following steps:1.
1. Using LDP, locate the following container:
CN=<SERVERNAME>,CN=Autodiscover,CN=Protocols,CN=<SERVERNAME>,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=<ORGNAME>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<DOMAIN>,DC=<TLD>
2. Double-click the <SERVERNAME> under Autodiscover and look for the "serviceBindingInformation" value:serviceBindingInformation (2): AutoDiscover.Corp.HMSA.com;
https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml;
serviceClassName: ms-Exchange-AutoDiscover-Service;The proper format for the Autodiscover URI is
https://serverfqdn/Autodiscover/Autodiscover.xml
3. Ran Set-ClientAccessServer -Identity HON10343 -AutodiscoverServiceInternalUri
https://honmail.corp.hmsa.com/autodiscover/autodiscover.xml
4. Ran Get-ClientAccessServer, but received an error after HON10343 was enumerated.
5. Next, did another Set-ClientAccessServer on HON10344.
6. Finally, ran Get-ClientAccessServer and enumerated all CAS servers in the org without error.
7. Tested opening EMC on both Exchange 2007 and 2010 and were able to successfully expand the Server Configuration for every role and enumerate all servers.
If any questions, please let me know.
Best Regard,
Jim Xu -
Exchange 2010 SP2 to SP3 upgrade question regarding Forefront
When doing an upgrade from 2010SP2 to SP3 is it recommended stopping all exchange services manually before installing the update? I know there is a prereq of stopping forefront or you may have an issue with services starting. I have not run into
this issue in my test environment. I do not know if the SP3 install requires any checks of services to be running or not.
I have also notices on a cas/ht server with forefront installed, you can't stop forefront without shutting down the transport service. So is it best to just shut all services down first before doing the upgrade?Hi,
Based on the article below, you can stop all Exchange services before you decide to install an Exchange service pack, if you really require this.
How to install a service pack or software update on an Exchange Server computer that is running Forefront Security or Forefront Protection
http://support.microsoft.com/kb/929080/en-us
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Maybe you are looking for
-
InDesign doesn't start on MacBook Pro 15" Mountain Lion
Hi, Adobe InDesign CS5 is the only program of the Adobe Collection that gives me troubles. I don't manage to open any existing document nor create a new one. Here's what I do: 1. Launch the application Adobe InDesign CS5; 2. Select "Create a New Docu
-
Came home to find computer restarted, which I assume is an automatic Firefox update. When I try to open Firefox, window pops up saying "Close Firefox" and, "A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I'm unabl
-
Ever since installing Mac OS X 10.7 I have been plagued by duplicate mailboxes in Mail.app. Does anyone know why this could be? I also cannot delete them - Mail just freezes and I have to Quit and relaunch. Any help gratefully received. TIA.
-
SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:
hi, Iam using forte.Iam getting this error Can anyone help me out from this error..!! SYSTEM ERROR: An accept of a new connection has failed: OS Error 4: Interrupted system call Class: qqsp_RemoteAccessException Error #: [501, 236] Detected at: qqcm_
-
So I bought my MBP 13" this summer of 09. It's been less than 6 months, and my computer's performance has been pretty bad (since the beginning) compared to my white macbook that I bought in summer 08 and the white macbook that my dad bought afterward