[workarounded] no device found after installation

I just installed arch on a dell inspiron R (came with windows 8, now erased from the hd) from a USB uefi image. Everything went well (so it seemed) but after rebooting i only get a "check media [failed]" and "no bootable device found". I alredy reinstalled everything the second time, just to be sure.
Since i got no errors of sort during the installation process I have no idea where to look. Is there something I can do from the uefi shell to see where the problem is?
Last edited by Box0 (2013-04-12 12:55:16)

I followed the beginner guide:
1) created 3 partition (efi,root,home)
2) installed the base system
3) installed efistub (installation went well, but it didn't boot)
3b) removed efistub and installed grub2 (installation went well, no errors, but it still didn't boot)
4) restarted the entire installation process, this time installing grub2 first, again no errors and no
boot.
In the bios setup (or whatever is called now) I have three options:
1) legacy boot mode
2) uefi boot without secure boot
3) uefi boot with secure boot.
I'm using the second.

Similar Messages

  • No Bluetooth Device found after BIOS Update

    Product Name and No.: HP dv6516tx
    Operating System: Windows XP
    Error Message: No Bluetooth device found
    Changes Made: Updated BIOS to most recent version F. 5A
    System Information:
    OS Name Microsoft Windows XP Professional
    Version 5.1.2600 Service Pack 3 Build 2600
    OS Manufacturer Microsoft Corporation
    System Name UDAYMITTAL-PC
    System Manufacturer Hewlett-Packard
    System Model HP Pavilion dv6500 Notebook PC
    System Type X86-based PC
    Processor x86 Family 6 Model 15 Stepping 13 GenuineIntel ~1496 Mhz
    BIOS Version/Date Hewlett-Packard F.5A, 3/22/2010
    SMBIOS Version 2.4
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume1
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.5687 (xpsp_sp3_qfe.080930-1426)"
    User Name UDAYMITTAL-PC\Uday Mittal
    Time Zone India Standard Time
    Total Physical Memory 4,096.00 MB
    Available Physical Memory 2.23 GB
    Total Virtual Memory 2.00 GB
    Available Virtual Memory 1.96 GB
    Page File Space 4.83 GB
    Page File C:\pagefile.sys
    Problem Description:
    Yesterday I updated my laptop's BIOS to F 5A - latest available on HP Website. Since then I have lost the bluetooth functionality, which was wroking just fine prior to the update. Now the system doesn't find a bluetooth device.
    What I have already done:
    1. Switched back to previous versions of BIOS (available on HP Website coz I didn't note the BIOS version before I updated it). - That didn't work.
    2. Reseated the wireless card - Didn't work.
    3. Manually checked the connection of bluetooth module to the motherboard - Connection was fine but it still didn't work.
    4. Uninstalled the bluetooth driver and reinstalled it (HP integrated module WIDCOM) - still didn't work
    5. Installed HP Wireless Agent - Didn't work
    6. Installed HP Integrated module driver along with HP Wireless Agent - Didn't work
    7. Installed Ubuntu to check if its recognizing the device - Even its not recognizing the device which it used to do earlier.
    8. Sadly there's no BIOS setting in Setup which I can change to correct the bluetooth behaviour (Phoenix BIOS with limited interface).
    After all the research, I am posting this because I am unable to find a sloution to this problem on my own. I request the members to please help.
    Uday

    I got the bluetooth working. Had to dismantle the laptop and found that a small switch was loose.

  • SAP HR patch Ecc6.0 Ehp4 not found after installation

    Hi,
    I have installed Ecc 6.0 Ehp7 but after installation i found SAPHR Patches on SAPHR6.0 .(SAPKE600)
    WAnt SAPHR patches on Ehp4.
    Is there any way which i can do at time of installtion only?
    Now i have to create xml stack file from Solman for upgradation to SAPKE604?
    Kindly suggest
    Regards
    Adil

    Hi Adil,
    After the installation ECC 6.0 EHP 7 , the base component will be at 600.since ECC 6.0 EHP7 is coming as a ready phase installation.
    You need to upgrade all the base coponenet 607 , with the help of SUM.
    So you need to generate the stack and upgrade it.
    With Regards
    Ashutosh Chaturvedi

  • No updatable devices found after firmware update

    Unfortunately I didn't check here before doing the latest updates. I dl'd the following on the night of July 1:
    2007-07-01 01:49:08 -0400: Installed "SuperDrive Firmware Update" (2.1)
    2007-07-01 01:49:31 -0400: Installed "iTunes" (7.3)
    2007-07-01 01:49:35 -0400: Installed "Safari 3 Beta Update" (3.0.2)
    2007-07-01 01:53:02 -0400: Installed "Mac OS X Update (Intel)" (10.4.10)
    2007-07-03 00:30:01 -0400: Installed "Audio Update 2007-001" (1.0)
    Since then each time I restart the computer the SuperDrive Update launches and tells me no updatable devices have been found. But this machine has a SD, unless I'm very much mistaken. Why won't the update take? Is it related to the ex HD issues I've been reading about here with 10.4.10?
    I also just looked at my sys log and it could be its own novel since these updates. I was going to post it in hopes it would help the Mac guys smarter than I, but I think it would flood out this post.
    I am also having the internet drop issue, again only when I'm on battery power, but I understand that's a bigger issue than just my machine. My Safari windows seem to be hanging and giving me the spinning beach-ball a lot when I try to scroll.
    I ran disk repair on permissions, that's all sorted out. I don't know what else to do to resolve the firmware update. Please help. Thanks!

    At the risk of sounding stupid.. how would I delete the download?
    And if I have a SuperDrive, which I do, why wouldn't the update apply to me and why would Software Updater have prompted me to download it in the first place?

  • HP officejet pro 8600 "not found" after installation on Dell laptop with Windows 7 op syst

    downloaded software from internet and it shows that it's been installed on computer.  Printer is on and shows that it is connected to the network.  Networks match on computer and printer.  Printer not printing from computer but did from my phone.  "printer not found" message comes up during connection process on the instal wizard.  I am using a Linksys wireless broadband router.  I've tried all the troubleshooters and found that there was a driver error, but I don't know how to correct this.  

    Hey @mech3320 ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand that you are having some trouble with the driver download on your AMD chipset but not your Intel one.
    I recommend that you try the web download of the drivers after you uninstall the ones that you tried form the CD.
    Driver Download Page
    Let me know if the web drivers work better for you or not.
    I worked for HP.

  • DVD/CD unit not found after installation of Windows 8 PRO

    After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
    When searching for a new driver I'm told that I have the latest one. I read on Microsoft support that a similar problem occured on installing Vista, but the solution should not be applied on this installation.
    What else is to do about this problem?

    > After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
    If you would use the Toshiba forums Advantage search option, then you would find this info:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
    +If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software+
    +So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.+

  • [SOLVED] No operating system found after installation

    Hey there,
    I'm new to Arch, I switched from Ubuntu and I'm willing to give Arch a fair try. My system is now more or less up and running and I'm very excited.
    However, I can only boot with the CD inserted and by choosing "Boot existing OS". If I remove the CD, I cannot boot because no OS is found on the harddisk.
    I tried running "grub-install /dev/sda" again, but that didn't work.
    I installed using "gdisk". My main system partition is encrypted, but /boot is not encrypted. I used a simple partition layout with LUKS, no LVM. I tried to find my error on the Installation Guide and the Beginners Guide, but I can't figure out what I did wrong...
    Help would be much appreciated. Let me know if you use further information.
    Thanks in advance
    Jonas
    Last edited by freijon (2014-04-06 14:04:36)

    Oxyd wrote:
    For UEFI, you need an EFI System Partition. You don't need the BIOS boot partition.
    Oh, and the installation CD needs to have been booted in UEFI mode as well. UEFI systems generally support both UEFI booting and legacy BIOS emulation. If you boot in BIOS mode, GRUB won't be able to install properly. You can run your whole setup in BIOS emulation mode if you don't particularly care for UEFI, but then using a legacy MSDOS partition table would perhaps be preferrable over GPT. (Or so the Wiki says.)
    As for "booting in UEFI mode" -- when I start my system up, I can press F11 to bring up a selection of where to boot from. Your key is likely going to vary, but the important bit is that -- on my computer at least -- it shows me two very similar entries for the Arch CD -- except one has "UEFI: " prepended to it -- that's the one I use to boot in UEFI mode. Your mileage is going to vary, but hopefully it'll be somewhat similar.
    I found an option in my BIOS to enable UEFI, but it is disabled by default. I find it quite strange that I have to enable this in order to make my installation work, as I never did this with Ubuntu. If I enable the third option (see pic), then I can boot the CD in UEFI mode. So that works. My question now is: Can I fix my installation or do I have to reinstall the entire system? I read in the wiki that the UEFI system partition has to be FAT32 and there is a minimal size of 256MB. However, my current boot partition is only 200MB. So I cant just reformat my old boot partition, or am I wrong?
    http://i.imgur.com/LS6x1VBl.jpg
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

  • Live Tipe not found after installation

    Live Type was working ok, until gradually start loosing templates, live text animations and finally the aplication file just disapeared from the computer. So I reinstalled from the original FCP HD 4.5 but I still cannot find it. After reinstallation a message "software has been installed succesfully" appears. Im I doing someting wrong?. Ad'l info: using Os panther 10.3.9, G4 tower, 1.25 gb sdram. Help will be greatly apreciated. Oh... someone sugested to use spotlight, but my current OS doesn't have this option.

    Live Type was working ok, until gradually start loosing templates, live text animations and finally the aplication file just disapeared from the computer. So I reinstalled from the original FCP HD 4.5 but I still cannot find it.,
    This is too weird to be lightly dismissed. You've got to figure out how non-user items can disappear. They shouldn't. You could be writing over that space on your drive but even that is so unlikely as to be really scary.
    You don't need spotlight, just use the normal Find functions and search for LiveType. You can also search for files that have been recently added. The media files are quite large s you can also search for recently added big files.
    bogiesan

  • How can I get sound on my MacBook Air after installation of Lion? "No output devices found" on the system preferences pane of my MacBook Air.

    Since installing Lion on my MacBook Air, I get no sound and ITunes playback doesn't move. The Sound Preference pane states "No output devices found." The Bluetooth connection to a WiFi speaker works, so it must be a software problem. Anyone?

    For sound, try the audio output port and connecting to the RCA  audio input ports on your Pioneer receiver.  Use something like this:
    http://eshop.macsales.com/item/OWC/PODCONNECTOR/
    Ciao.

  • After install it just says "No bootable device found" [SOLVED]

    I have been trying (several times now) to install Arch Linux. After the install, it just showed the message "No bootable device found".
    I have already asked for a solution here, but until now no one could really help me.
    I will paste my text from the other site here, to explain exactly my situation:
    I've been trying to install Arch Linux. After the installation, it shows the BIOS screen and after that there just comes a message that says "No bootable device found".
    I have retried the whole scenario now some times, still it just shows the same message...
    At installing, I have followed the Unofficial Beginner's Guide from the ArchLinux wiki.
    Here is what I did:
    First of all, I wiped the hard drive (on which before the wipe was Windows Vista installed) and put GPT on it by using gdisk. Then I set up some partitions, which now look as the following (output of parted):
    Model: ATA ST9160310AS (scsi)
    Disk /dev/sda: 160GB
    Sector size (logical/physical): 512B/512B
    Partition Table: gpt
    Disk Flags:
    Number  Start   End     Size    File system     Name                 Flags
    1      1049kB  2097kB  1049kB                  BIOS boot partition  bios_grub
    2      2097kB  107MB   105MB   ext2            Linux filesystem     
    3      107MB   21.6GB  21.5GB  ext4            Linux filesystem     
    4      21.6GB  30.2GB  8590MB  linux-swap(v1)  Linux swap           
    5      30.2GB  160GB   130GB   ext4            Linux filesystem     
    Then I mounted the root partition (sda2) to /mnt, after that also the boot and the home partition (sda3 and sda5) to /mnt/boot and /mnt/home and at the end formatted and activated the swap partition (sda4).
    Now I began installing the base system. After selecting the mirrors, I installed base and base-devel.
    At the end of the install I generated an fstab.
    Then I finally chrooted into /mnt, set up some Locales, set a root password and then installed and configured Grub2, exactly as it is explained here.
    At the end I exited from the chroot environment, unmounted the partitions and rebooted. You know the rest... It just showed the message that it coudn't find any bootable devices.
    By the way, I tried to install it on this computer.
    Hopefully someone finds out what I did wrong, thanks in advance!
    Last edited by brgr (2013-04-03 17:58:20)

    So, here is the /boot/grub/grub.cfg
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt3'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 f8d04422-e0a0-486e-ab$
    else
    search --no-floppy --fs-uuid --set=root f8d04422-e0a0-486e-abfd-43fa63f5e10e
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'g$
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 4ada76a3-b73a$
    else
    search --no-floppy --fs-uuid --set=root 4ada76a3-b73a-4ddd-94e2-e723e15cdc84
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /vmlinuz-linux root=UUID=f8d04422-e0a0-486e-abfd-43fa63f5e10e ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $m$
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 4ada76a3-b73a$
    else
    search --no-floppy --fs-uuid --set=root 4ada76a3-b73a-4ddd-94e2-e723e15cdc84
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /vmlinuz-linux root=UUID=f8d04422-e0a0-486e-abfd-43fa63f5e10e ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    ### END /etc/grub.d/20_memtest86+ ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    and here the /etc/fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda3 LABEL=system
    UUID=f8d04422-e0a0-486e-abfd-43fa63f5e10e /mnt ext4 rw,relatime,data=ordered 0 1
    # /dev/sda2 LABEL=boot
    UUID=4ada76a3-b73a-4ddd-94e2-e723e15cdc84 /boot ext2 rw,relatime 0 2
    # /dev/sda5 LABEL=userdata
    UUID=964b46b9-8b33-4978-bcef-5c9e41ade8c6 /home ext4 rw,relatime,data=ordered 0 2
    # /dev/sda4 LABEL=swap
    UUID=276da045-ffba-4b20-9230-2540898541b1 none swap defaults 0 0
    # /dev/sda3 LABEL=system
    UUID=f8d04422-e0a0-486e-abfd-43fa63f5e10e /mnt ext4 rw,relatime,data=ordered 0 1
    # /dev/sda3 LABEL=system
    UUID=f8d04422-e0a0-486e-abfd-43fa63f5e10e / ext4 rw,relatime,data=ordered 0 1
    # UUID=f8d04422-e0a0-486e-abfd-43fa63f5e10e LABEL=system
    /dev/sda3 /mnt ext4 rw,relatime,data=ordered 0 1
    # UUID=4ada76a3-b73a-4ddd-94e2-e723e15cdc84 LABEL=boot
    /dev/sda2 /boot ext2 rw,relatime 0 2
    # UUID=964b46b9-8b33-4978-bcef-5c9e41ade8c6 LABEL=userdata
    /dev/sda5 /home ext4 rw,relatime,data=ordered 0 2
    # UUID=276da045-ffba-4b20-9230-2540898541b1 LABEL=swap
    /dev/sda4 none swap defaults 0 0
    @Scimmia: I will try this out tomorrow, I don't have enough time to do it now.

  • After installing Mountain Lion.  Under sound, where it says select an output device, it say no output devices found and there is no sound.  How do I fix this?  I have reinstalled the os twice and still the same.  I have also repaired permissions.

    After installing Mountain Lion.  No sound. Under sound, where it says select an output device, it says no output devices found, and there is no sound.  How do I fix this?  I have reinstalled the os twice and still the same.  I have also repaired permissions.

    Try resetting the PRAM and SMC...
    PRAM Reset:
    http://support.apple.com/kb/HT1379
    SMC Reset:
    http://support.apple.com/kb/HT3964
    Hope this helps!

  • No Devices Found (Input and Output) After 10.9.3 Update

    Hi,
    I just update my Macbook Air (Mid 2013) to 10.9.3. After I finsih updating, I got a problem of no sound at all. Also when I check on System Preferences it shows that "No (Input/Output) device found".
    When I try changing the volume using the volume control key on my keboard it shows this image,
    I already tried doing some audio bug "fix" trick like reboot, deleting BezelService Preference File, and reset PRAM. However, nothing work.
    I am not sure whether I have to reinstall just the audio driver or anything. Audio bug has always been an issue for me since I update to Mavericks.
    Could anyone help?
    Thanks!

    Hey Tetsukara,
    Thanks for the question. It looks like you have already done some great troubleshooting on this issue. I would recommend following the steps in this resource:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    If your issue persists, you can follow the steps to contact Apple support or obtain service:
    5. If the issues persist, contact Apple support for further troubleshooting assistance.
    You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Thanks,
    Matt M.

  • Help!! Kernel panics after installation!!

    Hi,
    I am new to Arch Linux (migrating from Fedora). I am having some problems with the installation on my Sony VAIO CW (C2D, Nvidia GT230M). At first I couldn't get past the installation of X in the Beginner's guide, but after some tweaking with conf files I finally got it to work. But after reboot, kernel panic occured. This started happening intermittently from there onwards. Then I tried to install GNOME which failed miserably as in it panics and crashes everytime system starts.
    Then I tried KDE and things are much better compared to GNOME. The problem is whenever I try logging into a new KDE session, kernel panics. Only KDE Failsafe mode works (with sound). I honestly dont know what to do as I have no idea why the problem is occuring also. I plan to stay with Arch, as nouveau works much better than it used to in Fedora (3d support). Can anybody help with this issue?
    Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz GenuineIntel GNU/Linux
    10-nouveau.conf
    Section "Device"
    Identifier "n"
    Driver "nouveau"
    EndSection
    Xorg.0.log
    [ 50.605]
    X.Org X Server 1.9.2
    Release Date: 2010-10-30
    [ 50.605] X Protocol Version 11, Revision 0
    [ 50.605] Build Operating System: Linux 2.6.35-ARCH x86_64
    [ 50.605] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
    [ 50.605] Kernel command line: root=/dev/sda5 ro
    [ 50.605] Build Date: 01 November 2010 10:29:19PM
    [ 50.605]
    [ 50.605] Current version of pixman: 0.20.0
    [ 50.605] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 50.605] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 50.605] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 01:33:51 2010
    [ 50.606] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 50.617] (==) No Layout section. Using the first Screen section.
    [ 50.617] (==) No screen section available. Using defaults.
    [ 50.617] (**) |-->Screen "Default Screen Section" (0)
    [ 50.617] (**) | |-->Monitor "<default monitor>"
    [ 50.617] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 50.617] (**) | |-->Device "n"
    [ 50.617] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 50.617] (==) Automatically adding devices
    [ 50.617] (==) Automatically enabling devices
    [ 50.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 50.618] Entry deleted from font path.
    [ 50.618] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 50.618] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 50.618] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 50.618] (II) Loader magic: 0x7d3360
    [ 50.618] (II) Module ABI versions:
    [ 50.618] X.Org ANSI C Emulation: 0.4
    [ 50.618] X.Org Video Driver: 8.0
    [ 50.618] X.Org XInput driver : 11.0
    [ 50.618] X.Org Server Extension : 4.0
    [ 50.619] (--) PCI:*(0:1:0:0) 10de:0a2a:104d:905e rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 50.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 50.619] (II) LoadModule: "extmod"
    [ 50.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 50.629] (II) Module extmod: vendor="X.Org Foundation"
    [ 50.629] compiled for 1.9.2, module version = 1.0.0
    [ 50.629] Module class: X.Org Server Extension
    [ 50.629] ABI class: X.Org Server Extension, version 4.0
    [ 50.629] (II) Loading extension MIT-SCREEN-SAVER
    [ 50.629] (II) Loading extension XFree86-VidModeExtension
    [ 50.629] (II) Loading extension XFree86-DGA
    [ 50.629] (II) Loading extension DPMS
    [ 50.629] (II) Loading extension XVideo
    [ 50.629] (II) Loading extension XVideo-MotionCompensation
    [ 50.629] (II) Loading extension X-Resource
    [ 50.629] (II) LoadModule: "dbe"
    [ 50.630] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 50.637] (II) Module dbe: vendor="X.Org Foundation"
    [ 50.637] compiled for 1.9.2, module version = 1.0.0
    [ 50.637] Module class: X.Org Server Extension
    [ 50.637] ABI class: X.Org Server Extension, version 4.0
    [ 50.637] (II) Loading extension DOUBLE-BUFFER
    [ 50.637] (II) LoadModule: "glx"
    [ 50.637] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 50.650] (II) Module glx: vendor="X.Org Foundation"
    [ 50.650] compiled for 1.9.2, module version = 1.0.0
    [ 50.650] ABI class: X.Org Server Extension, version 4.0
    [ 50.650] (==) AIGLX enabled
    [ 50.650] (II) Loading extension GLX
    [ 50.651] (II) LoadModule: "record"
    [ 50.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 50.652] (II) Module record: vendor="X.Org Foundation"
    [ 50.652] compiled for 1.9.2, module version = 1.13.0
    [ 50.652] Module class: X.Org Server Extension
    [ 50.652] ABI class: X.Org Server Extension, version 4.0
    [ 50.652] (II) Loading extension RECORD
    [ 50.652] (II) LoadModule: "dri"
    [ 50.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 50.661] (II) Module dri: vendor="X.Org Foundation"
    [ 50.661] compiled for 1.9.2, module version = 1.0.0
    [ 50.661] ABI class: X.Org Server Extension, version 4.0
    [ 50.661] (II) Loading extension XFree86-DRI
    [ 50.661] (II) LoadModule: "dri2"
    [ 50.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 50.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 50.662] compiled for 1.9.2, module version = 1.2.0
    [ 50.662] ABI class: X.Org Server Extension, version 4.0
    [ 50.662] (II) Loading extension DRI2
    [ 50.662] (II) LoadModule: "nouveau"
    [ 50.662] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 50.675] (II) Module nouveau: vendor="X.Org Foundation"
    [ 50.675] compiled for 1.9.0, module version = 0.0.16
    [ 50.675] Module class: X.Org Video Driver
    [ 50.675] ABI class: X.Org Video Driver, version 8.0
    [ 50.675] (II) NOUVEAU driver
    [ 50.675] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 50.675] RIVA TNT (NV04)
    [ 50.675] RIVA TNT2 (NV05)
    [ 50.675] GeForce 256 (NV10)
    [ 50.675] GeForce 2 (NV11, NV15)
    [ 50.675] GeForce 4MX (NV17, NV18)
    [ 50.675] GeForce 3 (NV20)
    [ 50.675] GeForce 4Ti (NV25, NV28)
    [ 50.675] GeForce FX (NV3x)
    [ 50.675] GeForce 6 (NV4x)
    [ 50.675] GeForce 7 (G7x)
    [ 50.675] GeForce 8 (G8x)
    [ 50.675] (++) using VT number 7
    [ 50.676] drmOpenDevice: node name is /dev/dri/card0
    [ 50.676] drmOpenDevice: open result is 7, (OK)
    [ 50.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 50.676] drmOpenDevice: node name is /dev/dri/card0
    [ 50.676] drmOpenDevice: open result is 7, (OK)
    [ 50.676] drmOpenByBusid: drmOpenMinor returns 7
    [ 50.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 50.676] (II) [drm] nouveau interface version: 0.0.16
    [ 50.676] (II) Loading sub module "dri"
    [ 50.676] (II) LoadModule: "dri"
    [ 50.677] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
    [ 50.677] (II) NOUVEAU(0): Loaded DRI module
    [ 50.677] drmOpenDevice: node name is /dev/dri/card0
    [ 50.677] drmOpenDevice: open result is 8, (OK)
    [ 50.677] drmOpenDevice: node name is /dev/dri/card0
    [ 50.677] drmOpenDevice: open result is 8, (OK)
    [ 50.677] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 50.677] drmOpenDevice: node name is /dev/dri/card0
    [ 50.677] drmOpenDevice: open result is 8, (OK)
    [ 50.677] drmOpenByBusid: drmOpenMinor returns 8
    [ 50.677] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 50.677] (II) [drm] DRM interface version 1.4
    [ 50.677] (II) [drm] DRM open master succeeded.
    [ 50.677] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
    [ 50.677] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 50.677] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 50.677] (==) NOUVEAU(0): RGB weight 888
    [ 50.677] (==) NOUVEAU(0): Default visual is TrueColor
    [ 50.677] (==) NOUVEAU(0): Using HW cursor
    [ 50.696] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
    [ 50.794] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 50.803] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
    [ 50.804] (II) NOUVEAU(0): EDID for output LVDS-1
    [ 50.804] (II) NOUVEAU(0): Manufacturer: SNY Model: 5fa Serial#: 0
    [ 50.804] (II) NOUVEAU(0): Year: 2002 Week: 45
    [ 50.804] (II) NOUVEAU(0): EDID Version: 1.4
    [ 50.804] (II) NOUVEAU(0): Digital Display Input
    [ 50.804] (II) NOUVEAU(0): 6 bits per channel
    [ 50.804] (II) NOUVEAU(0): Digital interface is undefined
    [ 50.804] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 50.804] (II) NOUVEAU(0): Gamma: 1.00
    [ 50.804] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 50.804] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 50.804] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 50.804] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 50.804] (II) NOUVEAU(0): redX: 0.600 redY: 0.342 greenX: 0.295 greenY: 0.570
    [ 50.804] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111 whiteX: 0.312 whiteY: 0.328
    [ 50.804] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 50.804] (II) NOUVEAU(0): Supported detailed timing:
    [ 50.804] (II) NOUVEAU(0): clock: 72.0 MHz Image Size: 309 x 174 mm
    [ 50.804] (II) NOUVEAU(0): h_active: 1366 h_sync: 1424 h_sync_end 1482 h_blank_end 1540 h_border: 0
    [ 50.804] (II) NOUVEAU(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0
    [ 50.804] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
    [ 50.804] (II) NOUVEAU(0): Monitor name: t Flat Panel
    [ 50.804] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 47 kHz, PixClock max 85 MHz
    [ 50.804] (II) NOUVEAU(0): EDID (in hex):
    [ 50.804] (II) NOUVEAU(0): 00ffffffffffff004dd9fa0500000000
    [ 50.804] (II) NOUVEAU(0): 2d0c0104901f1100eaa8e099574b9225
    [ 50.804] (II) NOUVEAU(0): 1c505400000001010101010101010101
    [ 50.804] (II) NOUVEAU(0): 010101010101201c56ae50000c303a3a
    [ 50.804] (II) NOUVEAU(0): 440035ae10000018000000fc004e7669
    [ 50.804] (II) NOUVEAU(0): 6469612044656661756c000000fc0074
    [ 50.804] (II) NOUVEAU(0): 20466c61742050616e656c00000000fd
    [ 50.804] (II) NOUVEAU(0): 00003d1d2f0800002020202020000003
    [ 50.804] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
    [ 50.804] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 50.804] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 50.804] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
    [ 50.804] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
    [ 50.804] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
    [ 50.903] (II) NOUVEAU(0): EDID for output VGA-1
    [ 50.912] (II) NOUVEAU(0): EDID for output HDMI-1
    [ 50.912] (II) NOUVEAU(0): Output LVDS-1 connected
    [ 50.912] (II) NOUVEAU(0): Output VGA-1 disconnected
    [ 50.912] (II) NOUVEAU(0): Output HDMI-1 disconnected
    [ 50.912] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 50.912] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
    [ 50.912] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 50.912] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 1376)
    [ 50.912] (**) NOUVEAU(0): Driver mode "1366x768": 72.0 MHz (scaled from 0.0 MHz), 46.8 kHz, 59.9 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "1366x768"x59.9 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
    [ 50.912] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
    [ 50.912] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
    [ 50.912] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
    [ 50.912] (**) NOUVEAU(0): DPI set to (111, 114)
    [ 50.912] (II) Loading sub module "wfb"
    [ 50.912] (II) LoadModule: "wfb"
    [ 50.912] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 50.972] (II) Module wfb: vendor="X.Org Foundation"
    [ 50.972] compiled for 1.9.2, module version = 1.0.0
    [ 50.972] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 50.972] (II) Loading sub module "fb"
    [ 50.972] (II) LoadModule: "fb"
    [ 50.972] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 50.992] (II) Module fb: vendor="X.Org Foundation"
    [ 50.992] compiled for 1.9.2, module version = 1.0.0
    [ 50.992] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 50.992] (II) Loading sub module "exa"
    [ 50.992] (II) LoadModule: "exa"
    [ 50.992] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 50.993] (II) Module exa: vendor="X.Org Foundation"
    [ 50.993] compiled for 1.9.2, module version = 2.5.0
    [ 50.993] ABI class: X.Org Video Driver, version 8.0
    [ 50.993] (II) Loading sub module "shadowfb"
    [ 50.993] (II) LoadModule: "shadowfb"
    [ 50.994] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 50.994] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 50.994] compiled for 1.9.2, module version = 1.0.0
    [ 50.994] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 50.994] (--) Depth 24 pixmap format is 32 bpp
    [ 50.999] (II) NOUVEAU(0): Opened GPU channel 2
    [ 50.999] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 50.999] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 50.999] (II) NOUVEAU(0): GART: 512MiB available
    [ 51.001] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
    [ 51.027] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 51.027] (II) EXA(0): Driver registered support for the following operations:
    [ 51.027] (II) Solid
    [ 51.027] (II) Copy
    [ 51.027] (II) Composite (RENDER acceleration)
    [ 51.027] (II) UploadToScreen
    [ 51.027] (II) DownloadFromScreen
    [ 51.027] (==) NOUVEAU(0): Backing store disabled
    [ 51.027] (==) NOUVEAU(0): Silken mouse enabled
    [ 51.029] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 51.029] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 51.029] (==) NOUVEAU(0): DPMS enabled
    [ 51.029] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 51.029] (--) RandR disabled
    [ 51.029] (II) Initializing built-in extension Generic Event Extension
    [ 51.029] (II) Initializing built-in extension SHAPE
    [ 51.029] (II) Initializing built-in extension MIT-SHM
    [ 51.029] (II) Initializing built-in extension XInputExtension
    [ 51.029] (II) Initializing built-in extension XTEST
    [ 51.029] (II) Initializing built-in extension BIG-REQUESTS
    [ 51.029] (II) Initializing built-in extension SYNC
    [ 51.029] (II) Initializing built-in extension XKEYBOARD
    [ 51.029] (II) Initializing built-in extension XC-MISC
    [ 51.029] (II) Initializing built-in extension SECURITY
    [ 51.029] (II) Initializing built-in extension XINERAMA
    [ 51.029] (II) Initializing built-in extension XFIXES
    [ 51.029] (II) Initializing built-in extension RENDER
    [ 51.029] (II) Initializing built-in extension RANDR
    [ 51.029] (II) Initializing built-in extension COMPOSITE
    [ 51.029] (II) Initializing built-in extension DAMAGE
    [ 51.225] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 51.225] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 51.225] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 51.225] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 51.225] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
    [ 51.225] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 51.227] (II) NOUVEAU(0): NVEnterVT is called.
    [ 51.245] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
    [ 51.245] resize called 1366 768
    [ 51.660] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
    [ 51.660] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
    [ 51.660] (II) LoadModule: "evdev"
    [ 51.660] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 51.676] (II) Module evdev: vendor="X.Org Foundation"
    [ 51.676] compiled for 1.9.0, module version = 2.5.0
    [ 51.676] Module class: X.Org XInput Driver
    [ 51.676] ABI class: X.Org XInput driver, version 11.0
    [ 51.676] (**) Sony Vaio Keys: always reports core events
    [ 51.676] (**) Sony Vaio Keys: Device: "/dev/input/event5"
    [ 51.700] (--) Sony Vaio Keys: Found keys
    [ 51.700] (II) Sony Vaio Keys: Configuring as keyboard
    [ 51.700] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    [ 51.700] (**) Option "xkb_rules" "evdev"
    [ 51.700] (**) Option "xkb_model" "evdev"
    [ 51.700] (**) Option "xkb_layout" "us"
    [ 51.723] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 51.723] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 51.723] (**) Video Bus: always reports core events
    [ 51.723] (**) Video Bus: Device: "/dev/input/event4"
    [ 51.726] (--) Video Bus: Found keys
    [ 51.726] (II) Video Bus: Configuring as keyboard
    [ 51.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 51.726] (**) Option "xkb_rules" "evdev"
    [ 51.726] (**) Option "xkb_model" "evdev"
    [ 51.726] (**) Option "xkb_layout" "us"
    [ 51.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 51.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 51.743] (**) Power Button: always reports core events
    [ 51.743] (**) Power Button: Device: "/dev/input/event2"
    [ 51.756] (--) Power Button: Found keys
    [ 51.756] (II) Power Button: Configuring as keyboard
    [ 51.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 51.756] (**) Option "xkb_rules" "evdev"
    [ 51.756] (**) Option "xkb_model" "evdev"
    [ 51.756] (**) Option "xkb_layout" "us"
    [ 51.757] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 51.757] (II) No input driver/identifier specified (ignoring)
    [ 51.760] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event7)
    [ 51.760] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
    [ 51.760] (**) UVC Camera (05ca:18b5): always reports core events
    [ 51.760] (**) UVC Camera (05ca:18b5): Device: "/dev/input/event7"
    [ 51.783] (--) UVC Camera (05ca:18b5): Found keys
    [ 51.783] (II) UVC Camera (05ca:18b5): Configuring as keyboard
    [ 51.783] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD)
    [ 51.783] (**) Option "xkb_rules" "evdev"
    [ 51.783] (**) Option "xkb_model" "evdev"
    [ 51.783] (**) Option "xkb_layout" "us"
    [ 51.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
    [ 51.784] (II) No input driver/identifier specified (ignoring)
    [ 51.786] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
    [ 51.786] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 51.786] (**) Logitech USB Receiver: always reports core events
    [ 51.786] (**) Logitech USB Receiver: Device: "/dev/input/event10"
    [ 51.800] (--) Logitech USB Receiver: Found 20 mouse buttons
    [ 51.800] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 51.800] (--) Logitech USB Receiver: Found relative axes
    [ 51.800] (--) Logitech USB Receiver: Found x and y relative axes
    [ 51.800] (II) Logitech USB Receiver: Configuring as mouse
    [ 51.800] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 51.800] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 51.800] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    [ 51.800] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 51.800] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 51.800] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 51.800] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 51.800] (II) Logitech USB Receiver: initialized for relative axes.
    [ 51.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
    [ 51.800] (II) No input driver/identifier specified (ignoring)
    [ 51.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
    [ 51.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 51.801] (**) Logitech USB Receiver: always reports core events
    [ 51.801] (**) Logitech USB Receiver: Device: "/dev/input/event11"
    [ 51.816] (--) Logitech USB Receiver: Found 1 mouse buttons
    [ 51.816] (--) Logitech USB Receiver: Found scroll wheel(s)
    [ 51.816] (--) Logitech USB Receiver: Found relative axes
    [ 51.816] (--) Logitech USB Receiver: Found absolute axes
    [ 51.816] (--) Logitech USB Receiver: Found keys
    [ 51.816] (II) Logitech USB Receiver: Configuring as mouse
    [ 51.816] (II) Logitech USB Receiver: Configuring as keyboard
    [ 51.816] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 51.816] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 51.816] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 51.816] (**) Option "xkb_rules" "evdev"
    [ 51.816] (**) Option "xkb_model" "evdev"
    [ 51.816] (**) Option "xkb_layout" "us"
    [ 51.816] (EE) Logitech USB Receiver: failed to initialize for relative axes.
    [ 51.817] (II) Logitech USB Receiver: initialized for absolute axes.
    [ 51.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 51.821] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 51.821] (**) AT Translated Set 2 keyboard: always reports core events
    [ 51.821] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 51.843] (--) AT Translated Set 2 keyboard: Found keys
    [ 51.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 51.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 51.843] (**) Option "xkb_rules" "evdev"
    [ 51.843] (**) Option "xkb_model" "evdev"
    [ 51.843] (**) Option "xkb_layout" "us"
    [ 51.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [ 51.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 51.843] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 51.844] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 51.856] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 51.856] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 51.856] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 51.856] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 51.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 51.856] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 51.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 51.857] (II) No input driver/identifier specified (ignoring)
    [ 51.857] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 51.857] (II) No input driver/identifier specified (ignoring)
    [ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
    [ 51.858] (II) No input driver/identifier specified (ignoring)
    [ 51.858] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
    [ 51.858] (II) No input driver/identifier specified (ignoring)
    [ 80.420] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
    [ 80.420] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 80.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 80.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 80.420] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1424 1482 1540 768 772 776 780 -hsync -vsync (46.8 kHz)
    dmesg.log
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
    Command line: root=/dev/sda5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
    BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
    BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
    BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
    BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x140000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF write-through
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FC0000000 write-back
    2 base 0BE000000 mask FFE000000 uncachable
    3 base 100000000 mask FC0000000 write-back
    4 disabled
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbe000 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009bc00 (usable)
    modified: 000000000009bc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bdea7000 (usable)
    modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
    modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
    modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    modified: 00000000bdf39000 - 00000000be000000 (usable)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fd690] fd690
    init_memory_mapping: 0000000000000000-00000000be000000
    0000000000 - 00be000000 page 2M
    kernel direct mapping tables up to be000000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ 18000-1e000
    RAMDISK: 37e39000 - 37ff0000
    ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
    ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
    ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
    ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
    ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: FACS 00000000bdf19e40 00040
    ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
    ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
    ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
    ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1040121
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3923 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 759718 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a301 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [19300 - 19aff]
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
    PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
    PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
    PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
    PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
    PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
    PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
    PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
    PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
    PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
    PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Allocating PCI resources starting at be000000 (gap: be000000:22000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
    early_res array is doubled to 128 at [19b00 - 1aaff]
    pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
    Kernel command line: root=/dev/sda5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Subtract (69 early reservations)
    #1 [0001000000 - 00017f99a8] TEXT DATA BSS
    #2 [0037e39000 - 0037ff0000] RAMDISK
    #3 [00017fa000 - 00017fa1f8] BRK
    #4 [00000fd6a0 - 0000100000] BIOS reserved
    #5 [00000fd690 - 00000fd6a0] MP-table mpf
    #6 [000009bc00 - 00000fd410] BIOS reserved
    #7 [00000fd624 - 00000fd690] BIOS reserved
    #8 [00000fd410 - 00000fd624] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [0000018000 - 0000019000] PGTABLE
    #13 [00017fa200 - 00017fb200] BOOTMEM
    #14 [0000019000 - 0000019300] BOOTMEM
    #15 [0001ffc000 - 0001ffd000] BOOTMEM
    #16 [0001ffd000 - 0001ffe000] BOOTMEM
    #17 [0002000000 - 0005800000] MEMMAP 0
    #18 [00017fb200 - 0001813200] BOOTMEM
    #19 [0001813200 - 000182b200] BOOTMEM
    #20 [000182b200 - 0001843200] BOOTMEM
    #21 [0001844000 - 0001845000] BOOTMEM
    #22 [00017f99c0 - 00017f9a01] BOOTMEM
    #23 [00017f9a40 - 00017f9a83] BOOTMEM
    #24 [00017f9ac0 - 00017f9ee8] BOOTMEM
    #25 [00017f9f00 - 00017f9f68] BOOTMEM
    #26 [00017f9f80 - 00017f9fe8] BOOTMEM
    #27 [0001843200 - 0001843268] BOOTMEM
    #28 [0001843280 - 00018432e8] BOOTMEM
    #29 [0001843300 - 0001843368] BOOTMEM
    #30 [0001843380 - 00018433e8] BOOTMEM
    #31 [0001843400 - 0001843468] BOOTMEM
    #32 [0001843480 - 00018434e8] BOOTMEM
    #33 [0001843500 - 0001843568] BOOTMEM
    #34 [0001843580 - 00018435e8] BOOTMEM
    #35 [0001843600 - 0001843668] BOOTMEM
    #36 [0001843680 - 00018436e8] BOOTMEM
    #37 [0001843700 - 0001843768] BOOTMEM
    #38 [0001843780 - 00018437e8] BOOTMEM
    #39 [0001843800 - 0001843868] BOOTMEM
    #40 [0001843880 - 00018438e8] BOOTMEM
    #41 [0001843900 - 0001843968] BOOTMEM
    #42 [0001843980 - 00018439e8] BOOTMEM
    #43 [0001843a00 - 0001843a20] BOOTMEM
    #44 [0001843a40 - 0001843a60] BOOTMEM
    #45 [0001843a80 - 0001843aa0] BOOTMEM
    #46 [0001843ac0 - 0001843ad2] BOOTMEM
    #47 [0001843b00 - 0001843b12] BOOTMEM
    #48 [0001a00000 - 0001a1c000] BOOTMEM
    #49 [0001a80000 - 0001a9c000] BOOTMEM
    #50 [0001b00000 - 0001b1c000] BOOTMEM
    #51 [0001b80000 - 0001b9c000] BOOTMEM
    #52 [0001843b40 - 0001843b48] BOOTMEM
    #53 [0001843b80 - 0001843b88] BOOTMEM
    #54 [0001843bc0 - 0001843bd0] BOOTMEM
    #55 [0001843c00 - 0001843c20] BOOTMEM
    #56 [0001843c40 - 0001843d70] BOOTMEM
    #57 [0001843d80 - 0001843dd0] BOOTMEM
    #58 [0001843e00 - 0001843e50] BOOTMEM
    #59 [0001845000 - 000184d000] BOOTMEM
    #60 [0001b9c000 - 0001f9c000] BOOTMEM
    #61 [0005800000 - 0005a00000] BOOTMEM
    #62 [0001843e80 - 0001843e88] BOOTMEM
    #63 [0001843ec0 - 0001843ec8] BOOTMEM
    #64 [000184d000 - 000184d240] BOOTMEM
    #65 [0005a00000 - 0009a00000] BOOTMEM
    #66 [000184d240 - 000186d240] BOOTMEM
    #67 [000186d240 - 00018ad240] BOOTMEM
    #68 [000001ab00 - 0000022b00] BOOTMEM
    Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 41943040 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2526.841 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.25 BogoMIPS (lpj=8422803)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (10111.72 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 8 1f
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    DMAR: Forcing write-buffer flush capability
    DMAR: Disabling IOMMU for graphics on this chipset
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
    pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
    pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
    pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
    pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
    pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
    pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
    pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
    pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
    pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
    pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
    pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
    pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
    pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
    pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
    pci 0000:04:00.0: supports D1 D2
    pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
    pci 0000:04:00.1: supports D1 D2
    pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.1: PME# disabled
    pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
    pci 0000:04:00.3: supports D1 D2
    pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.3: PME# disabled
    pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
    pci 0000:04:00.4: supports D1 D2
    pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.4: PME# disabled
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 19 1f
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009bc00 - 000000000009ffff
    reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
    reserve RAM buffer: 00000000be000000 - 00000000bfffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:05: [io 0x0680-0x069f] has been reserved
    system 00:05: [io 0x1000-0x100f] has been reserved
    system 00:05: [io 0x0800-0x0803] has been reserved
    system 00:05: [io 0x0400-0x047f] has been reserved
    system 00:05: [io 0x0500-0x053f] has been reserved
    system 00:05: [io 0x164e-0x164f] has been reserved
    system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
    system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
    pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
    pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
    pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
    pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
    pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
    pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
    pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
    pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1756k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
    software IO TLB at phys 0x5a00000 - 0x9a00000
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1290907981.066:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7855
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:06: setting system clock to 2010-11-28 01:33:02 UTC (1290907982)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 504k freed
    udev[38]: starting version 164
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
    ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
    ata3: DUMMY
    ata4: DUMMY
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
    ata2.00: configured for UDMA/100
    ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    EXT4-fs (sda5): write access will be enabled during recovery
    EXT4-fs (sda5): orphan cleanup on readonly fs
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226256
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226255
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226252
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226251
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226241
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226214
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226213
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226212
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226211
    EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2226210
    EXT4-fs (sda5): 10 orphan inodes deleted
    EXT4-fs (sda5): recovery complete
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[958]: starting version 164
    fuse init (API version 7.15)
    iTCO_vendor_support: vendor-support=0
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (55 C)
    ACPI: Invalid active0 threshold
    ACPI: acpi_idle registered with cpuidle
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ01] (55 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    cfg80211: Calling CRDA to update world regulatory domain
    sky2: driver version 1.28
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
    sky2 0000:02:00.0: irq 41 for MSI/MSI-X
    sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
    input: PC Speaker as /devices/platform/pcspkr/input/input3
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: WMI: Mapper loaded
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2:

    I tried another fresh install to see if me installing GNOME before messed up anything. The same problem persists, I made another fresh install. I only did a net install with Arch Linux core and haven't yet installed xorg or anything yet (havent even synced pacman yet). Weirdly nouveau is already loaded, this is the output of dmesg,
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
    Command line: root=/dev/sda5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
    BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
    BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
    BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
    BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x140000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF write-through
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FC0000000 write-back
    2 base 0BE000000 mask FFE000000 uncachable
    3 base 100000000 mask FC0000000 write-back
    4 disabled
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbe000 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009bc00 (usable)
    modified: 000000000009bc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bdea7000 (usable)
    modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
    modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
    modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    modified: 00000000bdf39000 - 00000000be000000 (usable)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fd690] fd690
    init_memory_mapping: 0000000000000000-00000000be000000
    0000000000 - 00be000000 page 2M
    kernel direct mapping tables up to be000000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ 18000-1e000
    RAMDISK: 37e39000 - 37ff0000
    ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
    ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
    ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
    ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
    ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: FACS 00000000bdf19e40 00040
    ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
    ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
    ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
    ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1040121
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3923 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 759718 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a301 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [19300 - 19aff]
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
    PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
    PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
    PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
    PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
    PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
    PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
    PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
    PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
    PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
    PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Allocating PCI resources starting at be000000 (gap: be000000:22000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
    early_res array is doubled to 128 at [19b00 - 1aaff]
    pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
    Kernel command line: root=/dev/sda5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Subtract (69 early reservations)
    #1 [0001000000 - 00017f99a8] TEXT DATA BSS
    #2 [0037e39000 - 0037ff0000] RAMDISK
    #3 [00017fa000 - 00017fa1f8] BRK
    #4 [00000fd6a0 - 0000100000] BIOS reserved
    #5 [00000fd690 - 00000fd6a0] MP-table mpf
    #6 [000009bc00 - 00000fd410] BIOS reserved
    #7 [00000fd624 - 00000fd690] BIOS reserved
    #8 [00000fd410 - 00000fd624] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [0000018000 - 0000019000] PGTABLE
    #13 [00017fa200 - 00017fb200] BOOTMEM
    #14 [0000019000 - 0000019300] BOOTMEM
    #15 [0001ffc000 - 0001ffd000] BOOTMEM
    #16 [0001ffd000 - 0001ffe000] BOOTMEM
    #17 [0002000000 - 0005800000] MEMMAP 0
    #18 [00017fb200 - 0001813200] BOOTMEM
    #19 [0001813200 - 000182b200] BOOTMEM
    #20 [000182b200 - 0001843200] BOOTMEM
    #21 [0001844000 - 0001845000] BOOTMEM
    #22 [00017f99c0 - 00017f9a01] BOOTMEM
    #23 [00017f9a40 - 00017f9a83] BOOTMEM
    #24 [00017f9ac0 - 00017f9ee8] BOOTMEM
    #25 [00017f9f00 - 00017f9f68] BOOTMEM
    #26 [00017f9f80 - 00017f9fe8] BOOTMEM
    #27 [0001843200 - 0001843268] BOOTMEM
    #28 [0001843280 - 00018432e8] BOOTMEM
    #29 [0001843300 - 0001843368] BOOTMEM
    #30 [0001843380 - 00018433e8] BOOTMEM
    #31 [0001843400 - 0001843468] BOOTMEM
    #32 [0001843480 - 00018434e8] BOOTMEM
    #33 [0001843500 - 0001843568] BOOTMEM
    #34 [0001843580 - 00018435e8] BOOTMEM
    #35 [0001843600 - 0001843668] BOOTMEM
    #36 [0001843680 - 00018436e8] BOOTMEM
    #37 [0001843700 - 0001843768] BOOTMEM
    #38 [0001843780 - 00018437e8] BOOTMEM
    #39 [0001843800 - 0001843868] BOOTMEM
    #40 [0001843880 - 00018438e8] BOOTMEM
    #41 [0001843900 - 0001843968] BOOTMEM
    #42 [0001843980 - 00018439e8] BOOTMEM
    #43 [0001843a00 - 0001843a20] BOOTMEM
    #44 [0001843a40 - 0001843a60] BOOTMEM
    #45 [0001843a80 - 0001843aa0] BOOTMEM
    #46 [0001843ac0 - 0001843ad2] BOOTMEM
    #47 [0001843b00 - 0001843b12] BOOTMEM
    #48 [0001a00000 - 0001a1c000] BOOTMEM
    #49 [0001a80000 - 0001a9c000] BOOTMEM
    #50 [0001b00000 - 0001b1c000] BOOTMEM
    #51 [0001b80000 - 0001b9c000] BOOTMEM
    #52 [0001843b40 - 0001843b48] BOOTMEM
    #53 [0001843b80 - 0001843b88] BOOTMEM
    #54 [0001843bc0 - 0001843bd0] BOOTMEM
    #55 [0001843c00 - 0001843c20] BOOTMEM
    #56 [0001843c40 - 0001843d70] BOOTMEM
    #57 [0001843d80 - 0001843dd0] BOOTMEM
    #58 [0001843e00 - 0001843e50] BOOTMEM
    #59 [0001845000 - 000184d000] BOOTMEM
    #60 [0001b9c000 - 0001f9c000] BOOTMEM
    #61 [0005800000 - 0005a00000] BOOTMEM
    #62 [0001843e80 - 0001843e88] BOOTMEM
    #63 [0001843ec0 - 0001843ec8] BOOTMEM
    #64 [000184d000 - 000184d240] BOOTMEM
    #65 [0005a00000 - 0009a00000] BOOTMEM
    #66 [000184d240 - 000186d240] BOOTMEM
    #67 [000186d240 - 00018ad240] BOOTMEM
    #68 [000001ab00 - 0000022b00] BOOTMEM
    Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 41943040 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    spurious 8259A interrupt: IRQ7.
    Detected 2527.164 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.92 BogoMIPS (lpj=8423880)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.47 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 8 1f
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    DMAR: Forcing write-buffer flush capability
    DMAR: Disabling IOMMU for graphics on this chipset
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
    pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
    pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
    pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
    pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
    pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
    pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
    pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
    pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
    pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
    pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
    pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
    pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
    pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791ffff pref]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:03:00.0: reg 10: [mem 0xd6500000-0xd6501fff 64bit]
    pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:04:00.0: reg 10: [mem 0xd5100a00-0xd5100aff]
    pci 0000:04:00.0: supports D1 D2
    pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:04:00.1: reg 10: [mem 0xd5100900-0xd51009ff]
    pci 0000:04:00.1: supports D1 D2
    pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.1: PME# disabled
    pci 0000:04:00.3: reg 10: [mem 0xd5100000-0xd51007ff]
    pci 0000:04:00.3: supports D1 D2
    pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.3: PME# disabled
    pci 0000:04:00.4: reg 10: [mem 0xd5100800-0xd51008ff]
    pci 0000:04:00.4: supports D1 D2
    pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:04:00.4: PME# disabled
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 19 1f
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009bc00 - 000000000009ffff
    reserve RAM buffer: 00000000bdea7000 - 00000000bfffffff
    reserve RAM buffer: 00000000be000000 - 00000000bfffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:05: [io 0x0680-0x069f] has been reserved
    system 00:05: [io 0x1000-0x100f] has been reserved
    system 00:05: [io 0x0800-0x0803] has been reserved
    system 00:05: [io 0x0400-0x047f] has been reserved
    system 00:05: [io 0x0500-0x053f] has been reserved
    system 00:05: [io 0x164e-0x164f] has been reserved
    system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:09: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
    system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    pci 0000:00:01.0: BAR 15: assigned [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: BAR 15: assigned [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: BAR 15: assigned [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: BAR 15: assigned [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: BAR 15: assigned [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.0: bridge window [mem 0xd7900000-0xd8cfffff]
    pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd91fffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    pci 0000:00:1c.1: bridge window [mem 0xd6500000-0xd78fffff]
    pci 0000:00:1c.1: bridge window [mem 0xd9200000-0xd93fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd64fffff]
    pci 0000:00:1c.2: bridge window [mem 0xd9400000-0xd95fffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff]
    pci 0000:00:1c.3: bridge window [mem 0xd3100000-0xd50fffff]
    pci 0000:00:1c.3: bridge window [mem 0xd9600000-0xd97fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem disabled]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfebfffff]
    pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
    pci_bus 0000:01: resource 2 [mem 0xd8e00000-0xd8ffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    pci_bus 0000:02: resource 1 [mem 0xd7900000-0xd8cfffff]
    pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd91fffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    pci_bus 0000:03: resource 1 [mem 0xd6500000-0xd78fffff]
    pci_bus 0000:03: resource 2 [mem 0xd9200000-0xd93fffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd64fffff]
    pci_bus 0000:04: resource 2 [mem 0xd9400000-0xd95fffff 64bit pref]
    pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    pci_bus 0000:05: resource 1 [mem 0xd3100000-0xd50fffff]
    pci_bus 0000:05: resource 2 [mem 0xd9600000-0xd97fffff 64bit pref]
    pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:0d: resource 13 [mem 0xc0000000-0xfebfffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1756k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
    software IO TLB at phys 0x5a00000 - 0x9a00000
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1290893788.056:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7855
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 0 1d
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:06: setting system clock to 2010-11-27 21:36:28 UTC (1290893788)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 504k freed
    udev[38]: starting version 164
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04100 irq 40
    ata2: SATA max UDMA/133 abar m2048@0xd8d04000 port 0xd8d04180 irq 40
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata2.00: ATAPI: Optiarc BD RW BD-5730S, 1.71, max UDMA/100
    ata2.00: configured for UDMA/100
    ata1.00: ATA-8: TOSHIBA MK3263GSX, FG020A, max UDMA/100
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3263GS FG02 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM Optiarc BD RW BD-5730S 1.71 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[949]: starting version 164
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sony-laptop: Sony Notebook Control Driver v0.6.
    ACPI: WMI: Mapper loaded
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    ACPI: AC Adapter [ADP1] (on-line)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (56 C)
    input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input2
    ACPI: Invalid active0 threshold
    ACPI: acpi_idle registered with cpuidle
    input: Sony Vaio Jogdial as /devices/virtual/input/input3
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ01] (56 C)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Marking TSC unstable due to TSC halts in idle
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Switching to clocksource hpet
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    cfg80211: Calling CRDA to update world regulatory domain
    sky2: driver version 1.28
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
    sky2 0000:02:00.0: irq 41 for MSI/MSI-X
    sky2 0000:02:00.0: eth0: addr 00:24:be:85:96:40
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd8d04c00
    uhci_hcd: USB Universal Host Controller Interface driver
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8d04800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input4
    ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
    ACPI: Power Button [PWRB]
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    firewire_ohci 0000:04:00.3: PCI INT D -> GSI 17 (level, low) -> IRQ 17
    firewire_ohci 0000:04:00.3: setting latency timer to 64
    i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
    i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMI1 [io 0x0800-0xffff0803 64bit pref disabled]
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    firewire_ohci 0000:04:00.3: irq 42 for MSI/MSI-X
    firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    [drm] Initialized drm 1.1.0 20060810
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
    Initializing USB Mass Storage driver...
    scsi4 : usb-storage 2-1:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    iwlagn: Copyright(c) 2003-2010 Intel Corporation
    iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwlagn 0000:03:00.0: setting latency timer to 64
    iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
    iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
    iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
    sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 0)
    sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    sdhci-pci 0000:04:00.0: setting latency timer to 64
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
    sdhci-pci 0000:04:00.4: SDHCI controller found [1180:e822] (rev 0)
    sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
    sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
    sdhci-pci 0000:04:00.4: setting latency timer to 64
    Registered led device: mmc1::
    mmc1: SDHCI controller on PCI [0000:04:00.4] using DMA
    firewire_core: created device fw0: GUID 080046030321aebd, S400
    hda_codec: ALC262: SKU not ready 0x411111f0
    hda_codec: ALC262: BIOS auto-probing.
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:01:00.1: setting latency timer to 64
    usb 7-1: new full speed USB device using uhci_hcd and address 2
    iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b5)
    input: UVC Camera (05ca:18b5) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    phy0: Selected rate control algorithm 'iwl-agn-rs'
    usbcore: registered new interface driver hiddev
    usb 8-1: new full speed USB device using uhci_hcd and address 2
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10
    generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input11
    generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    scsi 4:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    sd 4:0:0:0: [sdb] 978944 512-byte logical blocks: (501 MB/478 MiB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nouveau 0000:01:00.0: setting latency timer to 64
    [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5500a2)
    [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    [drm] nouveau 0000:01:00.0: ... appears to be valid
    [drm] nouveau 0000:01:00.0: BIT BIOS found
    [drm] nouveau 0000:01:00.0: Bios version 70.16.27.00
    [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
    [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00010036
    [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
    [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02422362 00020010
    [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
    [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
    [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
    [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD52B
    [drm] nouveau 0000:01:00.0: 0xD84D: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: 0xD851: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: 0xDA0E: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA3B
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7C5
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE803
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA43
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAA8
    [drm] nouveau 0000:01:00.0: 0xEAA8: Condition still not met after 20ms, skipping following opcodes
    [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    [TTM] Zone kernel: Available graphics memory: 2011272 kiB.
    [TTM] Initializing pool allocator.
    [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40230000, bo ffff88013bfac400
    Console: switching to colour frame buffer device 170x48
    fb0: nouveaufb frame buffer device
    drm: registered panic notifier
    [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    EXT4-fs (sda5): re-mounted. Opts: (null)
    EXT4-fs (sda5): re-mounted. Opts: (null)
    Adding 2803304k swap on /dev/sda6. Priority:-1 extents:1 across:2803304k
    wlan0: authenticate with 94:44:52:78:c1:98 (try 1)
    wlan0: authenticated
    wlan0: associate with 94:44:52:78:c1:98 (try 1)
    wlan0: RX AssocResp from 94:44:52:78:c1:98 (capab=0x411 status=0 aid=1)
    wlan0: associated
    Intel AES-NI instructions are not detected.
    padlock: VIA PadLock not detected.
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010
    Command line: root=/dev/sda5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
    BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bdea7000 (usable)
    BIOS-e820: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    BIOS-e820: 00000000bdecf000 - 00000000bdee0000 (reserved)
    BIOS-e820: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    BIOS-e820: 00000000bdee1000 - 00000000bdf08000 (reserved)
    BIOS-e820: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    BIOS-e820: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    BIOS-e820: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    BIOS-e820: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    BIOS-e820: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x140000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF write-through
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FC0000000 write-back
    2 base 0BE000000 mask FFE000000 uncachable
    3 base 100000000 mask FC0000000 write-back
    4 disabled
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbe000 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009bc00 (usable)
    modified: 000000000009bc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bdea7000 (usable)
    modified: 00000000bdea7000 - 00000000bdecf000 (ACPI NVS)
    modified: 00000000bdecf000 - 00000000bdee0000 (reserved)
    modified: 00000000bdee0000 - 00000000bdee1000 (ACPI NVS)
    modified: 00000000bdee1000 - 00000000bdf08000 (reserved)
    modified: 00000000bdf08000 - 00000000bdf09000 (ACPI NVS)
    modified: 00000000bdf09000 - 00000000bdf0a000 (reserved)
    modified: 00000000bdf0a000 - 00000000bdf14000 (ACPI data)
    modified: 00000000bdf14000 - 00000000bdf1a000 (ACPI NVS)
    modified: 00000000bdf1a000 - 00000000bdf39000 (reserved)
    modified: 00000000bdf39000 - 00000000be000000 (usable)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fd690] fd690
    init_memory_mapping: 0000000000000000-00000000be000000
    0000000000 - 00be000000 page 2M
    kernel direct mapping tables up to be000000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ 18000-1e000
    RAMDISK: 37e39000 - 37ff0000
    ACPI: RSDP 00000000000f03b0 00024 (v02 Sony)
    ACPI: XSDT 00000000bdf12f10 0005C (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: FACP 00000000bdf08a90 000F4 (v04 Sony VAIO 20090922 MSFT 00010013)
    ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369)
    ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBDF19E40/0x00000000BDF19D40, using 32 (20100702/tbfadt-486)
    ACPI: DSDT 00000000bdf0a010 06831 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: FACS 00000000bdf19e40 00040
    ACPI: APIC 00000000bdf11f10 0006C (v02 Sony VAIO 20090922 MSFT 00010013)
    ACPI: MCFG 00000000bdf18c90 0003C (v01 Sony VAIO 20090922 MSFT 00000097)
    ACPI: HPET 00000000bdf18c10 00038 (v01 Sony VAIO 20090922 MSFT 00010013)
    ACPI: SLIC 00000000bdf14c10 00176 (v01 Sony VAIO 20090922 Sony 01000000)
    ACPI: SSDT 00000000bdee0590 00505 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: SSDT 00000000bdecbc10 002E4 (v01 Sony VAIO 20090922 INTL 20051117)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bdea7
    0: 0x000bdf39 -> 0x000be000
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1040121
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3923 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 759718 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a301 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [19300 - 19aff]
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bdea7000 - 00000000bdecf000
    PM: Registered nosave memory: 00000000bdecf000 - 00000000bdee0000
    PM: Registered nosave memory: 00000000bdee0000 - 00000000bdee1000
    PM: Registered nosave memory: 00000000bdee1000 - 00000000bdf08000
    PM: Registered nosave memory: 00000000bdf08000 - 00000000bdf09000
    PM: Registered nosave memory: 00000000bdf09000 - 00000000bdf0a000
    PM: Registered nosave memory: 00000000bdf0a000 - 00000000bdf14000
    PM: Registered nosave memory: 00000000bdf14000 - 00000000bdf1a000
    PM: Registered nosave memory: 00000000bdf1a000 - 00000000bdf39000
    PM: Registered nosave memory: 00000000be000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
    PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    Allocating PCI resources starting at be000000 (gap: be000000:22000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u524288
    early_res array is doubled to 128 at [19b00 - 1aaff]
    pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022201
    Kernel command line: root=/dev/sda5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Subtract (69 early reservations)
    #1 [0001000000 - 00017f99a8] TEXT DATA BSS
    #2 [0037e39000 - 0037ff0000] RAMDISK
    #3 [00017fa000 - 00017fa1f8] BRK
    #4 [00000fd6a0 - 0000100000] BIOS reserved
    #5 [00000fd690 - 00000fd6a0] MP-table mpf
    #6 [000009bc00 - 00000fd410] BIOS reserved
    #7 [00000fd624 - 00000fd690] BIOS reserved
    #8 [00000fd410 - 00000fd624] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [0000018000 - 0000019000] PGTABLE
    #13 [00017fa200 - 00017fb200] BOOTMEM
    #14 [0000019000 - 0000019300] BOOTMEM
    #15 [0001ffc000 - 0001ffd000] BOOTMEM
    #16 [0001ffd000 - 0001ffe000] BOOTMEM
    #17 [0002000000 - 0005800000] MEMMAP 0
    #18 [00017fb200 - 0001813200] BOOTMEM
    #19 [0001813200 - 000182b200] BOOTMEM
    #20 [000182b200 - 0001843200] BOOTMEM
    #21 [0001844000 - 0001845000] BOOTMEM
    #22 [00017f99c0 - 00017f9a01] BOOTMEM
    #23 [00017f9a40 - 00017f9a83] BOOTMEM
    #24 [00017f9ac0 - 00017f9ee8] BOOTMEM
    #25 [00017f9f00 - 00017f9f68] BOOTMEM
    #26 [00017f9f80 - 00017f9fe8] BOOTMEM
    #27 [0001843200 - 0001843268] BOOTMEM
    #28 [0001843280 - 00018432e8] BOOTMEM
    #29 [0001843300 - 0001843368] BOOTMEM
    #30 [0001843380 - 00018433e8] BOOTMEM
    #31 [0001843400 - 0001843468] BOOTMEM
    #32 [0001843480 - 00018434e8] BOOTMEM
    #33 [0001843500 - 0001843568] BOOTMEM
    #34 [0001843580 - 00018435e8] BOOTMEM
    #35 [0001843600 - 0001843668] BOOTMEM
    #36 [0001843680 - 00018436e8] BOOTMEM
    #37 [0001843700 - 0001843768] BOOTMEM
    #38 [0001843780 - 00018437e8] BOOTMEM
    #39 [0001843800 - 0001843868] BOOTMEM
    #40 [0001843880 - 00018438e8] BOOTMEM
    #41 [0001843900 - 0001843968] BOOTMEM
    #42 [0001843980 - 00018439e8] BOOTMEM
    #43 [0001843a00 - 0001843a20] BOOTMEM
    #44 [0001843a40 - 0001843a60] BOOTMEM
    #45 [0001843a80 - 0001843aa0] BOOTMEM
    #46 [0001843ac0 - 0001843ad2] BOOTMEM
    #47 [0001843b00 - 0001843b12] BOOTMEM
    #48 [0001a00000 - 0001a1c000] BOOTMEM
    #49 [0001a80000 - 0001a9c000] BOOTMEM
    #50 [0001b00000 - 0001b1c000] BOOTMEM
    #51 [0001b80000 - 0001b9c000] BOOTMEM
    #52 [0001843b40 - 0001843b48] BOOTMEM
    #53 [0001843b80 - 0001843b88] BOOTMEM
    #54 [0001843bc0 - 0001843bd0] BOOTMEM
    #55 [0001843c00 - 0001843c20] BOOTMEM
    #56 [0001843c40 - 0001843d70] BOOTMEM
    #57 [0001843d80 - 0001843dd0] BOOTMEM
    #58 [0001843e00 - 0001843e50] BOOTMEM
    #59 [0001845000 - 000184d000] BOOTMEM
    #60 [0001b9c000 - 0001f9c000] BOOTMEM
    #61 [0005800000 - 0005a00000] BOOTMEM
    #62 [0001843e80 - 0001843e88] BOOTMEM
    #63 [0001843ec0 - 0001843ec8] BOOTMEM
    #64 [000184d000 - 000184d240] BOOTMEM
    #65 [0005a00000 - 0009a00000] BOOTMEM
    #66 [000184d240 - 000186d240] BOOTMEM
    #67 [000186d240 - 00018ad240] BOOTMEM
    #68 [000001ab00 - 0000022b00] BOOTMEM
    Memory: 4020284k/5242880k available (3682k kernel code, 1082396k absent, 140200k reserved, 2083k data, 504k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 41943040 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    spurious 8259A interrupt: IRQ7.
    Detected 2527.035 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.65 BogoMIPS (lpj=8423450)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.21 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bdee4c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee2810 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 007A2 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 00000000bdee3d90 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20051117)
    ACPI: SSDT 00000000bdee1f90 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    \_SB_.PCI0:_OSC invalid UUID
    _OSC request data:1 8 1f
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    DMAR: Forcing write-buffer flush capability
    DMAR: Disabling IOMMU for graphics on this chipset
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0xe0e0-0xe0ff]
    pci 0000:00:1a.1: reg 20: [io 0xe0c0-0xe0df]
    pci 0000:00:1a.2: reg 20: [io 0xe0a0-0xe0bf]
    pci 0000:00:1a.7: reg 10: [mem 0xd8d04c00-0xd8d04fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xd8d00000-0xd8d03fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0xe080-0xe09f]
    pci 0000:00:1d.1: reg 20: [io 0xe060-0xe07f]
    pci 0000:00:1d.2: reg 20: [io 0xe040-0xe05f]
    pci 0000:00:1d.7: reg 10: [mem 0xd8d04800-0xd8d04bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xe130-0xe137]
    pci 0000:00:1f.2: reg 14: [io 0xe120-0xe123]
    pci 0000:00:1f.2: reg 18: [io 0xe110-0xe117]
    pci 0000:00:1f.2: reg 1c: [io 0xe100-0xe103]
    pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    pci 0000:00:1f.2: reg 24: [mem 0xd8d04000-0xd8d047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0xd8d05000-0xd8d050ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
    pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:02:00.0: reg 10: [mem 0xd7920000-0xd7923fff 64bit]
    pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff]
    pci 0000:02:00.0: reg 30: [mem 0xd7900000-0xd791

  • TV no longer connects to wireless internet after installation of Airport Time Capsule

    TV no longer connects to wireless Wi-Fi internet after installation of AirPort Time Capsule.

    I am having a similar problem with a new TIme Capsule. The wifi on the Time Capsule was working fine for months with all devices, iPhone 4s, iPad Air, iMac Air, Mac mini, and vizio smart TVs.  After a recent software update the Time capsule wifi no longer connects to the smart tvs or the iPhones. It still connects to the mac mini, iPad and iMac Air. I do NOT think the software update timing was just coincidental. But I have not found any information or other users confirming a similar problem on the Apple support site.

  • Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

    I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access.  After installation, Itunes would not open.  Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download.  Same problem with new download. Still does not open. I'm stumped.  I have over  30,000 files in itunes and use it every day HELP

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for

  • How to delete pictures from ipod touch

    just want to know how can i delete photos from my itouch? and also how i can select what photos to be saved from my computer to ipod touch when it started to synchronize all the files.

  • Sync deletes contacts on the iPhone

    I am a fairly well-experienced Apple user but cannot - for the life of me - figure out why contacts I put into my iPhone 4 get wiped out when I perform a sync. Even my own name has been randomly removed in past syncs. So, let's assume that the follow

  • Sales order Stock (E) transfer posting in WM management

    Hi Experts, I want to post sales order stock from Sales oder XXXX line XX to Sales Order XXXX Line YY. both the line items of the material are of same materil number. my stock is warehouse managed stock. when i use MB11 movemnet 413E error message Ma

  • EMac does not start up

    I have 3 machines I need help with, 2 different problems so I will make 2 posts. 1 does not progress beyond the gray screen with the Apple logo. Any ideas are greatly appreciated. Steps already tried: Flashing PRAM (no change) Booting into safe mode

  • Valuation class & G/L a/c.

    Hi All, There is a situation as mentioned below - There are couple of components which have been considered as Raw materials all these days.Now the customer wants them to be separated from RM (i.e he doesn't want components to hit the same G/L a/c wh