Workbench request &Customization req

Hai MM Guys,
I want to Know the difference bet the Workbench request &
Customization request..
Thanks

Hi raj,
Workbench is more ABAP orientated, and Customising is more configuration.
This link may help...
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/b4a1ab7acc11d1899e0000e829fbbd/frameset.htm
) workbench req. = objects of the workbench (se80)
-Tables, structures, data elements
-programs
-function modules
-transactions
2) customizing req. implicate the content of a CU-table
-configuration
Regards,
Hareesha k

Similar Messages

Customization Request & Workbench Request

What is the difference between Customiztion Request and Workbench Request?
regards
Satish

Work bench request : Workbench requests record changes made to ABAP Workbench objects (TCODE: 3KEI, GGB0, ABAP program creation/changes, LSMW). This should be created manually to transport the required changes
Customization request : Changes to Customizing settings are recorded in Customizing requests.( all changes / new settings relating to configuration part). This will be created as a reaction by the system to save the changes.
VVR

Customizing req vs workbench request

Hello All,
Can any one explain what is the difference between them?
Thanks,
Vibha

hi,
There are two types of Customizing change requests:
Customizing request
Customizing requests contain changes to client-dependent tables.
Workbench request
Workbench requests contain changes to client-independent tables.
You can monitor the change requests by project in the project management. The Transport requests tab contains the following functions for the current client:
Activate CTS functionality
As prerequisite for creating change requests. When the CTS functionality is active, the pushbutton label changes to Display CTS project data. When the CTS project is finished, the pushbutton label changes to Reactivate CTS functionality.
Assigned CTS requests
Go to Transport Organizer request overview, where you can create requests for a project.
CTS project object list
The project object list is unchanged. When the customizing project is finished, the complete object list can be exported.
CTS project status switch
Sets the project status switch.
End CTS project
End your customizing project. You can reactivate it later.
See transport control by project for further information about the Change and Transport System (CTS) for customizing projects.
http://help.sap.com/saphelp_erp2005/helpdata/en/09/88f330db9911d2b41a00609419f767/frameset.htm
Regards
Anversha

Is there any way to change the type of Transport like workbench to Customiz

Hi All,
Here we are having very silly question.
Is there any way to change the type of Transport like from
Workbench to Customize and from Customize to Workbench within the same client.
Assume that there the no object associated with the transport.
Your quick respose is highly appreciated...
Thanks in Advance!

No this cannot be done.
Both work bench and custimizing are separate entites when it comes to tranport layers config.
You cannot save a report change into customizing request this will be saved into work bench request only .
In the same way table entries or some customizing tasks can be captured only into custimizing tr.
Br,
Vijay.

Diff between cusztmizing and workbench request

could u please let me know what is diff between workbench and custmizing req ?
Regards

Hello,
customizing req vs workbench request
Check this info.
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Hope this resolves your query.
Reward all the helpful answers.
Regards,
Jorge Diogo

Difference between customizing request and workbench request?

Hi ,
What is the difference between customizing request and workbench request?
please reply.........

HI,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
pl reward if it helps.
Thanks
Sadhu Kishore

Customizing request and Workbench request

Can some one clarify me the difference elaborately
Thanks
Krishna

Hi Krishna
Changes to cross-client Customizing objects and to Repository objects are recorded in Workbench requests
In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
Changes to client-specific Customizing objects are recorded in Customizing requests.
Customer customized data designed for a specific client is transported to another client using customizing request. Most of the cases these requests are something like changing values in tables (that too client specific).
Hope it helps
regards
Srinivas

Customizing request & Workbench request

Dear all,
What is the differance between Customizing Request & workbench request?

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
o changes to the Customizing settings are possible
o the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Regards,
Satish

Find workbench request for existing report

Hi
Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
thanks

Hi Seba ,
You can find the workbench request for the report by displaying the report and following this path in the menubar.
Utilities > version > version management.
If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
Regards,
Anuj

Workbench request released

Hi,
I accidentally released a workbench request for Asset Accounting in R/3. I have tried numorously to delete the request even in R/3. I now have an error when I try to change a query. Is there any way that a request can be deleted/changed after it is released?
Regards,
Adri

Hi Adri,
I'm not sure how can we back the changes from the target system. (it depends on version management and high complex issues)
And I sugget you to release a corrective request for the previous released request.
To capture, follow the process as you did before.
Create a new request in SE09.
To this request, assign the package associated to your query in BEx transport in Transport Connection (RSA1)
Hope this Helps! Assign pts if its useful!
Regards
GSK

STRANGE!!! Script in a Workbench Request.

Hi All,
Generally i am told:
1. All Client Dependent objects (Table Entries) ask for customizing request.
2. All Client Independent objects (Cross-Client table entries) ask for Workbench Request.
The SAP Script which is a client dependent object, but when i was saving my script it asked for a Workbench Request.
Could any one please let me know why this happens.
Thanks & Regards,
Goutham.

You have mentioned the answer inthe question itself. Customising requests are for Client dependent Table Entries. Since Script is not a table entry but a R/3 object it will be saved in the Workbench Request.
Regards,
Anish Thomas

Prompt for transportable Workbench request

Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.

I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

New Requests created are in 'Local Workbench Request' in R3 Development

Hello ,
I am going to transport data sources from R3 Dev to R3 Quality.
I have successfully transported the package (which is created in SE80 ) and Application componenet hierarchy and all active version data source RSA6 to R3 Quality .
I have also checked that the package , application transport hierarchy and data sources in R3 Quality.
Now when I tried to create new requests for LBWE data sources ( maintain extract structure , generate data source) , I am getting a message Create Customizing Request , So I created Customizing Request and then I am getting message to create Local Workbench request. If I create local workbench request then it can not be imported to R3 Quality.
Client R3 is open SCC4 settings are 'Automatic Recording of Changes ' and 'Changes to repository and cross client customizing are allowed'.
I am not getting why the system is not asking me to created 'Workbench Request'.
Thanks and Regards ,
Amol Kulkarni

Hello Viren ,
Local Transport Request are not transportable even if we release them.
I have resolved the issue in the below way ,
I went to SE21 and entered the package name as 'YBW' and then clicked on change .
Then Click on properties tab and then select Transport layer as SAP and save.
Go to SE80 and select package and in dictonary Objects drill down view ...right click on any selected view name ...go to other function and click on Write Transport Entry...mention request from Own Request tab which was earlier as Local Workbench Request.
Then go to SE10 and double click on request and go to properties tab ...there select Target Group as
R3 Quality Server name and save it.
Transport the package to R3 Quality.
Henceforth whichever request u create will be of type 'Workbench Request'.
go to SE10 and cross check that your request is now Workbench Request,
Regards ,
Amol K.

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

Maintenance of View V_DFKKCJM requires workbench request

Hi everybody,
I have the following problem with maintenance of view V_DFKKCJM (tcd FPCJM): Changes are recorded in a workbench request and thus, the view can only be maintained in clients which are opened for repository changes. The view is client-specific, so from my point of view, a customizing request should be sufficient to transport the changes. I assumed that changes are recorded in a workbench request because the view has delivery class 'A' and the table maintenance dialog uses standard recording routine for changes. (transport of data from an application table usually leads to workbench request).
I changed the delivery class of the view V_DFKKCJM to 'C' and expected that now, changes should be recorded in a customizing request, but it doesn't work out - i'm still getting a workbench request. I've debugged the whole thing and noticed that in function module TR_CHECK_TYPE, before detemining the request type depending on delivery class, table OBJH is read and if an entry in this table is found for the current object, then the required request is type 'R' (workbench).
Does anybody know, what table OBJH is for and how I could solve this problem?
Thank you for any suggestions, Kathrin!

Hi Kathrin,
you might have noticed - I haven't had a look into a system up to now.
Now I searched a table with generated table maintenance. We just have one open client, but in our sandbox (without transports ) I made a small test: I'm asked for a customizing request. Our database table has the data class (technical settings) APPL2 - that's probably the only data class which leads to customizing requests. User(1) seems not to be classified and APPL0(1) seems to lead to workbench requests.
If you tell me the place of the request type determination, I will do a debugging, too. But currently I'm too far away of the interesting parts.
Regards,
Christian

Workbench request &Customization req

Similar Messages

Maybe you are looking for