Workbook doesn't fit the window when launched from Portal

Hello SCNer's,
When a workbook is launched from Portal it opens to the right side of the window and is minimized.
It fits the window once maximized, are there any settings available which can defaultly set the workbook to fit the window.
Thanks SCNer's.

Hi,
Do you mean by executing the Query in portal or executing the Workbook.
Protal setting for the number of columns/rows are decided by 0ANALZER_PATTERN web template. Which is the default web template.
Check the settings in the Default Web Template used.
Thanks & Regards,
Namrata

Similar Messages

My dashboard doesn't fit the screen when I plug in a second monitor...

How do I get it so that it fits the same when using a dual monitors as it does when using just my MacBook? (2008 macbook running Snow Leopard)

1950shady wrote:
apologies, first time using the forum
Easily done - wasn't meant to be critical, just that usually you're more likely to get the answer in the dedicated forum.
AC

Long text doesn't fit the window exactly

Hi friends,
in PO smartforms i have included the header text of PO.
the problem is the long text doesn't fit to the window exactly i.e.,
when we enter the text in PO in the header a line can contain only 60 characters approximately where as in my smartforms it can contain more than that.
so in the display of smart form i get lot of space in the right side and i get the remaining part of text in the next line.
regards,
Saravan raj

hi,
what u have told is correct but we can't expect the end user to do it each time when they paste the long text.
is there any option to bring it by default.
regards,
saravan raj

Installing Flash Player in Mac 10.8.4 : The installer doesn't display a window when launched

Hello
After accidentally uninstalling Flash Player, I tried to reinstall but I can not do it. I looked in the console and I found this:
25/06/13 00:00:19,292 CoreServicesUIAgent[559]: Error: qtn_file_apply_to_path error: Read-only file system
25/06/13 00:00:34,318 coreservicesd[61]: Application App:"Install Adobe Flash Player" [ 0x0/0x3b03b] @ 0x0x7fb9c8e33790 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x3c03c:) ), so denying.
25/06/13 00:00:34,319 WindowServer[77]: [cps/setfront] Failed setting the front application to Install Adobe Flash Player, psn 0x0-0x3b03b, securitySessionID=0x186a4, err=-13066
25/06/13 00:00:34,323 authexec[570]: executing /bin/sh
25/06/13 00:00:34,329 com.apple.launchd.peruser.501[354]: ([0x0-0x3b03b].com.solidstatenetworks.awkhost[562]) Exited: Killed: 9
Can you help me? I looked for a solution on the Adobe web site and on the internet but I found nothing.
Thank you in advance

Solution trouvée =D
solution found =D
for people who are in the same situation: use this version available here
for more questions my Facebook : z.lachgar
Good luck!

Firefox launches and re-loads my tabs, but clicking on the tray icon doesn't display the window

I can see that Firefox is loaded and running (running Windows 7) - I can hear notices of emails arriving and see the miniature version of the active tab when my mouse hovers over the icon in the tray - but when I click on it it doesn't expand the window so that I can view it. I have tried closing and re-opening as well as restarting my computer. I'm hoping for a solution that preserves the open tabs I currently have. Thanks in advance for any and all help!

* Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
* Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window (use the keyboard cursor keys).
If that works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save that setting.
If the above didn't help then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

lunagirl wrote:
The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61. Add/Remove programs has only these pre-installed apps:
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Is the activation assistant one of them?
No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
Rgds,
Ahti

Workspace doesn't fit the screen anymore...

Hello.
Since today (and Mac OS X's update I installed this morning, I guess), my Photoshop CS6 workspace doesn't fit the screen of my 12 inch Cintiq (connected to a 2014 Macbook Air). No matter what I do, it keeps it wrong.
Trying to set the photoshop window to the whole Cintiq screen with the "green" Mac OS corner button, this is what I get:
Hitting F won't do the trick, this is what it gets me:
I tried to clear the Photoshop prefs, without success. I checked for updates and found there was a Photoshop update I had not yet installed, and I did install it, to no success. Needless to say, this makes my copy of Photoshop most unusable, which is a really big problem for an illustrator like me. I really wish I can solve this as soon as possible.
Thanks.

Yeah, no results. Still the same.
If I take my main window and move it up by myself, it's just gonna stay there until the next click somewhere, then it gets back to this wrong placement,.

Battery failure although my battery doesn't fit the exchange program?

hello there!
i know there have been a lot of threads about the battery life and failures in the macbook pro but i don't know which one fits my case...
my mbp is a week 13 and has no problems at all. i don't use the battery that often - by now i have 14 cycles.
my battery's serial number doesn't fit the exchange program but today happened this odd thing:
i used my mbp on battery for less than two hours and the battery symbol said that i still have about 50 minutes of battery power. all of a sudden it turned off (as described in many other threads) without any warning and i couldn't turn it on without plugging in the power cable. when i turned it on it started from deep sleep mode (dimmed desktop).
...of course i did reset the pram and stuff - but what is going on? as i said i don't meet the exchange program for faulty batteries but still it doesn't seem to work proper.
what can i do?
thanks in advance, guys!
j.

hi and thank you all for your replies so far!
over the weekend i took some screenshots showing the various total of mAh. i have no idea if that is normal like this? and the battery is behaving normal again, no random shutdown... you can find the images under the following link...
http://www.propaganda-pixel.de/mbp/mbp.htm
in addition i added a photo of my magsafe... now that it comes to the battery issue i got slightly concerned if this crimpy cord should be like this (not that this thing starts to melt on me!).
when i transport my mbp i wind the cord around those two hooks and i never pull the magsyfe by the cord out. but still it looks like this.
the power cord is from a week 10 macbook pro which i got exchanged for a week 13 but i had to keep the cord...
i know, this has nothing to do with the battery issue and no, i'm not paranoid - just now that i started this thread i thought i could add it...
so my questions are:
- shall i request a new battery considering the various mAh indications?
- shall i request a new power cord? or does mine look normal?
why i ask is because i don't want to request something when there is no need for a replacement.
thank you all!

Booklet .pdf with crop marks, booklet doesn't fit the current paper size warning

Hello. I am on XP using CS4 InDesign.
I have the document set up as 4 pages, each 8.5 x 11, however, when creating a booklet .pdf, I mean it to be 2 pages 11x17.
When I add in the crop marks they do not appear on the .pdf when it is created. I receive a warning in the booklet diaglog that the booklet doesn't fit the current paper size and it says to specify a larger paper size.
What can I do to have the crop marks on my file? I understand the .pdf will be a little larger than 11x17 in order to fit the crop marks.
Thanks for any help in advance.

Hi Peter,
Thank you. I did try that first, but now I figured out what I did wrong. When the .pdf was made and opened, I cropoped the page according to the marks, but the page remained 12 x 18 instead of 11x17. I made sure that the "automatically adjust to fit marks and bleeds" and "use document bleed settings" was checked in the booklet dialog and print InDesign dialog.
When I cropped the page again to make sure I sized it correctly, it was 11x17.
Thank you!!!

A5 booklet "doesn't fit the current [A4] paper size". What's wrong?

Hi,
Sorry, I'm new to InDesign, and am having a bit of a freakout over a booklet I need to complete by this afternoon.
The page sizes are all A5. I try to print with A4 paper settings and the preview looks okay, but says underneath "the booklet doesn't fit the current paper size". Obviously A5, A4, it should fit perfectly, as it looks to in the preview. When I actually print it the pages are slightly jumbled - 3 with 24 (of 24 pages), 4 with 23 etc., with the centrefold 12-13 split (12-15, 13-14).
Any idea what's going on here? Is it something to do with crop areas? I can't work it out.
Thank you! An enormous amount of gratitude to anyone who can help me fix this.

OH HEY it's suddenly saying it's fine now, even though the only thing I've changed is to add a bit of text, nothing that should fundamentally affect the structure. Thanks InDesign!

How to keep the image centered in the window when mouse zooming in cc 2014

I,m not able to keep the image centered in the window when using the mouse scroll wheel for zooming.

Ctrl + and - keys are meant for "center zoom". As far as I know, the zoom tool is a "point zoom" tool. If you move the zoom tool with your mouse, it will zoom in on that part of the image.
Also Ctrl 0 is "fit to screen" and Ctrl 1 is 100% zoom. (Use Cmd if this is a Mac)
Gene

A window doesn't know the window which has createdit.

you can also look at client-side SO , or passing parameters to child win.
Cordialement.
Patrice Bourdon
Alliance Sante France
Tel : (33) 02.54.60.26.27
Fax : (33) 02.54.60.25.00
e-mail: mailto:patrice.bourdonalliance-sante.fr
<mailto:patrice.bourdonalliance-sante.fr>
web : http://www.alliance-sante.fr <<a
href=
"http://www.alliance-sante.fr/">http://www.alliance-sante.fr/</a>>
-----Message d'origine-----
De: Olivier Andrieux [mailto:oandrieuxaxialog.fr]
Date: vendredi 9 juin 2000 14:34
À: forte-userslists.xpedior.com
Objet: (forte-users) a window doesn't know the window which has created it.
Hi,
I have created a window win_a and a second window win_b whis is instancied
in win_a(new+display) when a button is clicked
but i want to use the datas of win_a in win_b. For it, i have made a class
'main' which instanciate win_a.
The problem is that win_b does'nt know win_b....
Thanks
Olivier Andrieux
Axialog Lille
France

Bring Excel 2007 to the front when called from LabView v9 in Windows 7

I am building a duplicate system using Windows 7, LabView v9 and Excel v2007. The original system used WinXP, Excel 2007 and LabView v8.6. The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible. This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front. The icon blinks in the Win7 taskbar and when selected displays over LabView. If I minimize the Labview window, Excel is there. This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar. The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode. At the customers request, the new system uses the .xlsm extension on the Excel template files. I have tried using application.visible = True in the macro as well. Could be a setting in Labview? Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview.
HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
Thank you in advance
Stephen
Solved!
Go to Solution.

I will try the windowstate change. Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls?
I am not sure about the API since the discussion there is with regard to DDE. (Taken from the link document: If you want to call a DLL that contains ActiveX
objects, use the Automation
Open VI with the Property
Node and the Invoke
Node.). I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be. Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work? I may be trying this already but in Excel through the use of the macro I call from LabView. It contains application.visible = True at the beginning before reading files and plotting data.
I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro. The puzzle for me is the blinking Excel icon in the task bar. This means active and running but not visible or something wrong as well. There are a few #VALUE cells if not all test in the system are run. Again not a problem in Excel 2007-WinXP-LV8.6
Thank you again one and all.

OT - What the Windows 7 launch reveals

My take on what the Windows 7 launch reveals about Microsoft... FWIW - http://blog.cartweaver.com/
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
www.twitter.com/LawrenceCramer

Yus9,
Fair points - I think straight up questions and answers will come out. There is the Lenovo and Windows 7 page that should have links and most of the information that you might need.
Rather than have 1 very long video, we tried to break up some of Matt and John's discussion into relevant chapters. Not everyone is a fan of video, but I thought it added another way for people to connect with us.
Thanks !
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate.

Workbook doesn't fit the window when launched from Portal

Similar Messages

Maybe you are looking for