Workbook is refreshing for 3 hour's which normally takes  20 to 25 minutes

Hi All,
I am working on one workbook which contains 10 querry's.
Problem: Recently from couple of weeks same workbook is refreshing for 3 hour's which normally takes  20 to 25 minutes previously. Version we are using is BW 3.5
please provide some information and let me know any steps to resolve the issue.
Thanks,
Loki

Identify whether any particular query causing undue delay. You can try to fill the cache for this query in night job or you can use RSRT to fill the cache for the query.
Check the settings in the workbook, Right click properties, Interaction tab, Refresh workbook when query is refreshed setting is check marked
Check any change happened to any dependent infoproviders from the date you are facing the trouble

Similar Messages

  • I purchased a year of adobe cc today. when the screen came up to tell me it was processing my payment, not to hit the "back" button or refresh the page as it could take a few minutes. That was 7 hours ago. The help chat told me it would take 24 hours to p

    i purchased a year of adobe cc today. The screen came up to tell me it was processing my payment, not to hit the "back" button or refresh the page as it could take a few minutes. That was 7 hours ago. I contacted the help chat department and was told it would take 24 hours to process. Is this normal?? Why would the screen tell me "a few minutes" if it's actually 24 hours? Has anyone else had this problem? I am so tempted to just refresh the page and try my luck with my credit card canceling a second payment should it happen. THAT might be faster.

    Hi stephanie palmer,
    We would like to inform you that your order has been placed successfuly and you can strart using the subscription.
    Kindly follow the below mentioned link to install products.
    Creative Cloud Help | Download, install, update, or uninstall apps
    Kindly share the results once done.
    Thanks,
    Atul Saini

  • HT201407 my iphone 4s has been on reset for hours is this normal

    and message now reads iphone cannot be resored device cannot be found

    Hi there fay102,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    -Griff W. 

  • Screen just keeps cycling a four-square panel in the middle for hours.  Is this normal?

    Screen just keeps cycling a four square panel in the middle for hours - is this normal?

    Hi yacht61,
    I would say that is definitely not normal! Are you having trouble logging in or converting a file?  For starters, please try the following:
    Clear the browser cache and try again.
    Try a different web browser.
    If the problem occurs when you're converting a file, try converting a different file.
    Let me know if the problem persists, and also whether it occurs when logging in or converting.
    Best,
    Sara

  • With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

    With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
    iPad2 sync is fine.
    Any ideas to solve it?

    This sounds like a problem you should take up with Apple Customer Support.
    The other users like yourself here are not going to be able to help you with this problem.
    Allan

  • Which setting takes priority??

    I have an user base of 500 users.I do not want to schedule the reports.
    All the users will open the reports and view the data.
    Since there are 500 users they do not want the users to hit the database 500 times.
    They want to make use of the Cache TImeout Setting in the properties of the Webi Processing server.
    So as long as the users are passing the same prompt values it will fetch the same data from the cache.
    Say if the Cache Timeout Setting is set to 60 minutes.This will mean that for one hour if any user passes the same prompts he is going to get the same data from the cache and it will NOT go back to the database to refresh the query.
    The problem or question here is:How do I make use of this Cache Timeout Setting in a webi report ?
    To elaborate...
    If the user just opens a report(since it is not a scheduled report) he will see a blank report .
    I can check the box "Refresh on Open" and it will go back to the database and refresh and show data on the report.
    What happens to the Cache Timeout Setting value then? Does the Refresh on Open overide the Cache Timeout Setting then?
    Will that value still be honored or will not be because it is refresh on open.
    Which settign takes priority here.
    Any input is highly appreciated.
    Thanks
    Mohan Koduru

    Hi ,
    Covering 100% of Reports trough webi Caching is a big chalenge .. so far i know there is no Physical cahing for Webi it s only Memory caching. To cover that for 500 Users every 60 minutes for N Reports .. I m not sure if it s the right way ..
    do the users realy need 60 Minutes young data or would they be satisfied with daily reports. in this case i would consider distributing reports daily via Email. If the reports has to be persinalized u could burst them also ..

  • HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

    My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

    Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
    Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
    Now if you get an error message then follow the article below to find out what causes the issue:
    http://support.apple.com/kb/TS3694
    In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

  • Is over 400 hours (and counting) normal for iTunes to authenticate an iBook?

    Is over 400 hours (and counting) normal for iTunes to authenticate an iBook before uploading to iBooks store? Does the size of the document make a difference?
    Any help or advice greatly appreciated.
    Thanks

    OK, by coincidence this  happened to me just  yesterday as I was updating  a book, I   was doing other things and  noticed after about an  hour  it was still  showing loading lines.
    Its locked up somewhwere and  I just closed/ force close if needed.. and started the delivery process again.
    This time it  took 20 minutes or so which was what I expected.
    If it  happens a second time, try starting the  Publish from within iBA, but  first  check the  xxxxxxx.itmsp number and  check if it issues a new xxxxx.itmsp, if it does.. delete the old one to avoid confusion.

  • I'm updating my os and the screen has been gray for over an hour, is this normal?

    I'm updating my os and the screen has been gray for over an hour, is this normal?
    I have a new Mac book pro and am updating to the latest version of OS update.

    Shouldn't. Which update. Provide specifics on how and from where. If this is a new machine, it should already be running 10.8.4, ainxw that shipped one and a half months ago.

  • Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the  ''Extracting''  stage for 7-8 hours after which it does not progress

    latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the  ''Extracting''  stage for 7-8 hours after which it does not progress.

    Refer to EX11....
    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • For some reason my google search bar which normally sits in the top right hand side of my screen has disappeared, but my normal search bar still remains. I want to get the google search bar back, but I'm not sure how

    for some reason my google search bar which normally sits in the top right hand side of my screen has disappeared, but my normal search bar still remains. I want to get the google search bar back, but I'm not sure how

    See Here...
    https://discussions.apple.com/message/19334395#19334395

  • HT4768 Is it normal for this software download to take 5 or more hours?

    I have been downloading the new Lion software for about 5 hours, is this normal?

    Depends on your internet connection.  The download is 4+ GB.

  • My ipods been backing up for two hours is that normal?

    my ipods been backin up for two hours now. and the screen hasmt changed or anything. im trying to updated my ipod. how long does it normally take?

    Depends on size.  Usually about 2-5 minutes. Nome may take up to 20-30 if large storage space is being used.  Two hours is too long. Something is not right.m I feel an error message coming

  • Mavericks has been downloading for 4 hours, is that normal?

    Mavericks has been downloading for 4 hours, is that normal?

    Depends on your internet connection speed - I've heard of fast and slower. It is a huge file: about 5 GB; with my connection it takes at least 2.5 hours. What is your connection speed?
    Edit: based on your second post, you are downloading Mountain Lion update (shown at the bottom) and are trying to download Mavericks at the same time? Can't download two OS versions at the same time. So, wait until you have the Mountain Lion updated and installed and then try Mavericks again.

  • Firefox has been strongly suggesting I update, which I've tried, but I just get the "barber pole" wait with message "connecting to the update server" for hours and nothing happens

    Firefox has been suggesting I update my software for a few weeks now. I happily click on "update now" and my Mac appears to be trying to connect to the update server. The window displays "Downloading Firefox" and the barber pole wait bar is moving. I've done this 5-6 times, for HOURS at a time, and nothing happens.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

Maybe you are looking for

  • My computer is already authorised with my apple ID, how do i listen to my purchased music?

    My computer is already authorized with my Apple ID, how do I listen to my purchased music? iTunes keeps asking me to authorize my computer.

  • Error while creating webservice destination in PI 7.1

    Hi, I have a Webdynpro application developed with NWDS 7.1 that is consuming web services from PI 7.1 server. I have exposed RFCu2019s from PI 7.1 as web service using transaction se37 and consumed them in my Webdynpro application. I have to deploy t

  • How to set attributes in new connection url request

    Hi, I'm an italian programer and I'm sorry for my english. Using the follow java code, I include an jsp page in to other jsp page. I use struts framework too. The problem is that the page includes do not has on the request object the same attributes

  • Numeric Precision Error

    Hi, I am using ODP 10.2.0.2.21 with c# and .Net 2.0 and Oracle 10g. Most of my stored procedures output the results back to the caller in the form of a generic REF CURSOR. When I call OracleDataAdapter.Fill to populate a data-set using a call to one

  • No non-linear under voice-port to reslove hissing on NM-HDV

    Hello. I have a trouble with 2MFT on NM-HDV. I can hear hissing on call. So, i had configured no non-linear under voice-port, then i can't hear any hissing. Instead, I can hear echo on call. How can i fix it? Regard, john.