Workbook Migration-System error in program CL_RSR_XLS_VIEW and from ASSIGN_

Hi Experts,
We are migrating workbooks from 3.x to BI 7. While opening the workboon from BI 7 Analyzer we are getting the following System Error  and Disconnecting from BW server.
'Program Error in class SAPMSSY1 method UNCAUGHT_EXCEPTION. System error in program CL_RSR_XLS_VIEW and from ASSIGN_QUERY_2_DP03'."
We are at support pack level 17 and GUI - 710 with patch level 8.
If you have experienced with the above errors. Please respond.
Thanks
DB

Hi Naveen,
In migration you will get all these errors related to Front end. First save the Existing 3.x workbook   so that the old version of the workbook will be saved into new Excel version (2003). now try to migrate the workbook , this time you will not get this error.
The root cause for this problem would be all your workbboks have been created erlier in very old version of  Excel.
Thanks
DB

Similar Messages

  • Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)

    Hi guys,
    any can help how to solve below error.
    Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)
    regards
    raja

    Hello ,
               Check the following note 578948 and see if you could get some help.
    hope it helps
    assign points if useful

  • System error in program CL_RSDM_READ_MASTER_DATA and form

    Hi Xpertz
    I had a workbook created on a multiprovider.  There was a navigation attribute removed from a infoobject for(which was not mapped in my multiprovider)
    I am getting this error when i try to run the workbook.
    "System error in program CL_RSDM_READ_MASTER_DATA and form
    sidvaldirect_read2"
    I tried running rsrv and found that there was a hierarchy field which is giving error. 
    It stated that no leaf properly maintained.
    I tried correcting it but it didnt work. 
    But I went to my query and removed a field(not hierarchy but another characterstic in  the query) and it works fine.
    I am not restricitng anything key figure with this characterstics..
    So how to go about this...........
    Thanks in advance
    Regards
    R M K

    Hi Ravi
    I checked that the hierarchy and the characterstics both are different and heirarchy is not  using the characterstic.  Could you tell me what causes this error? If it is because  of SID's then how to handle that. Awaiting your reply.

  • Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

    Hello SDN
    While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
    "Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
    Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
    Appreciate any help and points will be assigned for useful information.
    Thanks
    kumar

    Hi Dinesh
    It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
    variable_screen=X&template_id=0QUERY_TEMPLATE
    In the messages , For generation, it display:
    &CAUSE&
    The query contains selection elements with "Constant Selection". Such a
    query cannot be run in the read mode 'Read Everything at Once'.
    &SYSTEM_RESPONSE&
    The read mode is automatically converted.
    &SYS_ADMIN&
    In the Variables, I see
    &CAUSE&
    Variable <(>&<)>V1& is used in the query in such a way, that an
    optional entry is not possible.
    For example, you might be using an "Exclude", or the variable might be
    connected using OR to additional selections for <(>&<)>V2& in the
    global filter, but is still displayed in the columns selections.
    It is also not possible to use an optional parameter variable to fill
    an interval selection in either the from-field or the to-field.
    &SYSTEM_RESPONSE&
    &WHAT_TO_DO&
    If you are able to accept the mandatory entry, you need not do
    anything. Otherwise you must work with several variables in the query.
    You can use an optional interval variable to do this.
    &SYS_ADMIN&
    For Key Figs :
    &CAUSE&
    Quantities are multiplied with values for the key figure &V2& (&V1&).
    This is not sensible.
    A basic key figure was probably defined that contain a price. Only
    addable amounts should be written on the database. Ratios and prices
    are calculated as key figures. Therefore, the system maintains the
    correct sequence, meaning summing takes place on every place and then
    the quotient is formed.
    If a 'price amount' is saved as a basic key figure after all then the
    'non-aggregated indicator' can be undone using 'Change key figure'.
    Therefore, the system carries out the multiplication (or division)
    before the summing. The key figure is then assigned to the group 'Other
    columns'.
    &WHAT_TO_DO&
    Please check the definition of the key figure &V2& (&V1&).
    <DS:TRAN.KDNN>Check or change key figure &V1&</>
    Can you please let me know how to fix this issue?
    Thanks
    Kuamr

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All,
    When I refresh a query/workbook getting following error message and can not proceed further..
    Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this

    I don't know if you have since been able to resolve this problem.
    Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
    Hope that this is of help to someone.

  • System error in program SAPLRSDM_F4 and form RSD_CHA_GET_VALUES-02-

    BW3.5
    I have got several queries that have been running happily for a long time, which have suddenly developed a fault. I run the queries in Bex Analyser as part of a workbook, and these queries are disconnecting from the BW server. If I run the same queries from Query Designer I see the Stop message "System error in program SAPLRSDM_F4 and form RSD_CHA_GET_VALUES-02-".
    This is a query on a Multiprovider looking at 2 Infocubes.
    Does anyone know what has happened?

    Thanks Gaurav,
    This gave the clue that my query was too complex. Rather than follow the instructions in the note, I changed the query restrictions to make them simpler and all is well.

  • System error in program CL_RSR_RRK0_PARTITION and form BROWSE_02-03-

    Guys,
    I'm getting an error when i filter something in BEX Analyzer.
    For Eg, I have an Material Free Characterisitics, executed the Query Successfully. After that in Workbook i'm trying to filter Material Values.
    It Shows the error as " System error in program CL_RSR_RRK0_PARTITION and form BROWSE_02-03- "
    Plz help its urgent ...
    Regards,
    SK

    Hi Chetan,
    Thanx for your reply.
    But we already applied the Notes : 983354.
    Have a problem only with ~BROWSE_02-03-
    Still its showing error....
    Regards,
    Sathish

  • Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

    HI All,
    The following error is thrown when I execute the query.
    abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
    However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
    Appreciate your help in advance.
    Regards,
    Harika

    Dear Harika,
    Try to repair at RSRV and check.
    Check: Re: SID error for characteristic
    Srini

  • !!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

    Hi Gurus,
    Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
    In the log i am getting following error message:
    "System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Message no. BRAIN299".
    Please help urgent.
    FYI.....
    we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
    Points will surely be awarded.
    Thanks,
    Anurag

    Hello Anurag,
    Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
    Regards,
    Neha

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

    Hi,
    I am trying to execute a report and it gives me this error  "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
    Thanks
    Jay.

    Hello Jay,
    If valid for your system release and support package level please apply the SAP note 1129450.
    Best Regards,
    Des

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

    Hello all,
    One of the users is trying to run a report in Production using BEx analyser and gets the following error.
    BI Server error:
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
    I have already run the SAP Note 1237190 but there is no use as the error comes up again.
    Could any one please help to resolve this issue.
    Thanks
    Phani.

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-

    Hi there
    I get the error message
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    when trying to run a web template from the portal. If I run it from WAD, it runs perfectly. If I then run the same template from the portal, with the same user, I get the above error message.
    If I click on the message, I get further information, which says
    "Portal Runtime Error
    An exception occurred while processing a request for :
    iView : com.sap.portal.contentfetching.BWTunnel
    Component Name : com.sap.portal.contentfetching.BWTunnel"
    Any ideas on what this can be?
    I am able to run other templates as this user.
    Cheers,
    Andrew

    Go to RSRT transaction and Generate the report (query) once again.
    Hope it works.
    Regards

Maybe you are looking for

  • DOM Parsing Exception in translator. Dequeuing is failing

    Hi, -> I am working on EDI HIPPA File Protocol. -> My b2b configuration is working. I am getting the payload xml in IP_IN_QUEUE. But ESB with AQAdaptor is failing giving the below Exception. -> ORABPEL-11211 DOM Parsing Exception in translator. DOM p

  • Plugging my guitar into my interface, i have huge latency problem en gb 08, mac laptop os5.8

    please help, when I plug my guitar directly into my  tascam us 144 interface the latency problem makes it  almost impossible to record a decent track. I am using  GB 08 on a mac laptop with  OS 5.8

  • Arbitrary object types in PL/SQL call with OCI for Oracle 9.2

    Hi, i'm trying to develop a generic library that is able to execute a call to a pl/sql with a generic list of types. If the objects are native (i.e. number, varchar2...) works fine, but i cannot understand how to do the same with a generic user defin

  • My Z10 does not connect

    Hi Z10 does not connect to my system Win7 Link is downloaded and it shows my z10 as connected but it does not allow me to sync it keeps asking for reconnect/reload i tried reloading few times none works i need help i am getting frustrated with this

  • Socket Timeout Webservice Exception

    I am trying to connect to the webservice called as Currency Convertor.. Its a very simple process which just connects to the webservice to get the conversion result.. But I get the following error doing that.. How can I resolve the error? A component