Workbook not refresh after running Planning Function (BI-IP)

Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
Supasake

Hi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D

Similar Messages

Variables from workbook are not visible in the Planning function

Hi,
We're using a workbook with a bunch of queries in it. Every query has a lot of variables declared that are calculated based on two input ready variable that users are required to fill the first time.
Everything works as expected until the save data function is called, which in turn calls the planning function.
Here, the user exit variable try to be recalculated again. Unfortunately, this planning function loses track of the two input ready variables that were on the workbook, so the user exit variables have no values.
Can you please suggest a method so that:
a) The user exit processing in the planning function "sees" the two input ready variables
b) The user exit processing is not triggered in the planning function and it's taking the already calculated values
Let me know if you require further information.
Best regards,
George

Hi,
the variables in the filter of the query lives in one variable container and the variables of the filter of the planning sequence live in another variable container. They do not know each other. You need to establish a relationship between them. Usually this is done via variable binding for regular variables. For exit variables the variable binding can be done as written above.
If as in your case you have variables in the filter of the query and you want to use their values in the variable of the planning sequence than you need to store the values somewhere where you can retrieve them in the exit. This can be in a e.g. in shared memory or in the session memory. To do this you need to spend an extra exit variable in the filter of the query. The exit variable reads the real values and stores it somewhere (e.g. shared memory, global parameter of a function group, a class member or something similar). Now as the variable value is stored it can be read in the implemenation of the exit variable in the filter of the planning sequence.
In total we have 3 variables:
Variable 1 contains the value which the user keys in and exists in the filter of the query.
Variable 2 reads variable 1 and stores the value. It needs to be defined in the filter of the query as well.
Variable 3 reads the stored value and needs to be defined in the filter of the planning sequence.
Regards Matthias Nutt
SAP Consulting Switzerland

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Manual rebate condition exclusion not refreshed after redetermination of it

Hi Experts.
I am working with CRM 4.0.
Lately, we realized there is an error occurring in the price deternination:
The condition exclusion for manual rebate condition is not refreshed after redetermination of the product. There is missing a price validation before saving the document with the new product.
Step-to-step description of the error:
1)     I am creating an order in trx. CIC0 or CRMD_BUS2000115 and determine the product (sector A).
2)     Now I assign a manual rebate (condition Z...) of 20 % on item level.
3)     On header level I replace the product to one of another sector (B).
4)     I check the pricing conditions of the new product on item level. The same rebate of 20 % is maintained.
This is an error, because the condition exclusion for products of sector B allows rebates only until 5 %.
Can anybody help me, please.
Best regards,
Cristina

This is not standard due to information of SAP OSS.

The graph dose not shown after running the Customize JSP Page.

Hi All,
While creating customize JSP I am facing one problem - The graph dose not shown after running the Customize JSP Page.
What are the possibilities ? any body has any Idea Please help me

Hi all,
I have the same issue! Any solution??
Thanks
BI Beans Diagnostics(v1.0.2.0) 11/10/06
=========================================================
JDEV_ORACLE_HOME .......................... = D:\jdev1012b1913
JAVA_HOME ................................. = D:\ORDB10gR2Home\jdk
JDeveloper version ........................ = 10.1.2.1.0.1913
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.67.0
BI Beans internal version ................. = 3.2.2.0.24.2
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.4.2
JDBC JAR file location .................... = D:\jdev1012b1913\jdbc\lib
Database version .......................... = 10.2.0.2.0
OLAP Catalog version ...................... = 10.2.0.2.0
OLAP AW Engine version .................... = 10.2.0.2.0
OLAP API Server version ................... = 10.2.0.2.0
BI Beans Catalog version .................. = 3.2.2.0.24
OLAP API JAR file version ................. = "10.1.0.5.0"
OLAP API JAR file location ................ = D:\jdev1012b1913\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 1
Number of metadata measures ............... = 23
Number of metadata dimensions ............. = 8

Screen not refreshing after sleep mode

Hello All,
I have had a problem since 10.7.XX where my screen does not refresh after the computer goes into screen saver mode and then into sleep mode. When I move my mouse to resume i get a line drawn where I move my mouse and it reveals the login screen slowly. I can click on a login account and a small section of the screen refreshes where the login password is. Once I login it goes away. Was hoping Mountail Lion would address, but the problem continues from Snow Leopard. I am on a Imac 24" 2009 3.06Ghz dual core with 4 Gig of Ram, Nvidia GeForce 8800 GS 512mb. Thanks in advance for any advice.
Chad

Hello,
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Attribute binding value not refreshed after transaction rollback

Hi,
Using ADF Faces/Trinidad + ADF Data Bindings + ADF Business Components.
I was experimenting with task flows vs transaction control vs form validation and met the following problem.
First, here's a little intro to my application design. A page template defines the layout. There's only one page in the application using a dynamic region to show a dynamic task flow. The template defines a menu containing navigation items; each item action changes the current dynamic task flow id.
One of the flow starts with a data bound table listing users. Each row has an edit button to navigate to an edit form. The edit form is in a separate task flow as I want the automatic rollback triggered when a flow is abandoned.
The problem occurs when I quit the form clicking a menu item AFTER a validation error occurred. Transaction is rollbacked as expected, however when I go back to the form (whatever row I choose), the invalid value that failed the previous validation is shown.
It seems the attribute binding is not refreshed. To validate this hypothesis, I added a button that explicitly calls refreshControl on the attribute binding as shown below. When the button is clicked, the form shows the correct value.
    // In a managed bean
    public void refreshFirstName(ActionEvent evt)
        getBindingContainer().findCtrlBinding("FirstName").refreshControl();
    }I working on a possible workaround, but I've not succeeded yet. I'm looking into using the finalizer of the task flow (or possibly the initializer) to force a refresh of the control bindings.
Any ideas?
Thanx!
Olivier

Hi,
I am experiencing similar strange behaviour, it sounds like it could be related, i am not using task flows though.
I have a read only table, and when a user double-clicks on a row an af:popup is displayed which displays an edit form (contentDelivery is set to "lazyUncached" in the popup). Pressing the cancel button on the edit form executes a rollback and hides the popup. However, after this has occurred, whenever another row (or the same row) is selected in the read only table, the edit form will display data from the old record that was rolled back. I've noticed that the old data is only displayed in editable fields, while the correct data is displayed in read-only fields. I'm pretty sure the rollback works properly, and the iterator is on the correct row, just it is displaying incorrect data in the editable text fields. I've tried implementing cancel functionality with both a rollback action and refreshing the row using REFRESH_WITH_DB_FORGET_CHANGES, but the same issue exists regardless of which method is used. I've also noticed that the application starts behaving correctly again if the commit button is pressed.
Has anyone come up with a workaround for this issue?
By the way, is there any way we can keep track of the bug numbers that are mentioned in this forum?
Thanks,
Michael.

USB Keyboard not working after running Monolingual

Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*

How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

PSI - Budget Field is not getting after running Process Update Summary Bal

Hi,
I have a project with Budget being created through Financial Plan types. After Baselining the budget and performing Actual Transactions, i run Process 'PRC: Update Project Summary Amounts for a Single Project' and 'PRC: Update Project Summary Amounts'. System updates Project Status Inquiry - PSI with Actual Transactions but Budget field is getting updated and it keeps on showing as Zero Budget.
Whereas when i create project with Budget Entry Method and not through Financial Plan Types, PSI is correctly updated after running these processes. Is PSI budget field intended for Budget Entry from Application Based Forms Only or there is something else i need to do get the PSI Bidger field updated.
Thoughts on this would be highly appreciable.
Zeeshan

Hi Dina
Thanks for your reply, please confirm what i have to do in order to populate the data to PSI from Financial Plan.
Zeeshan

Master-Detail Detail does not refresh after it's been empty

I have a master detail page (both are tables) that works just fine, until I click a master record that has no details.
After that the panelHeader of teh detail is refreshed with the PPT but the table underneath it is not, I keep seeing "no rows yet", no matter which master record I click.
When I go to a different page and return it's fine again.
Only one of my pages has this behavior, I tested this on another and it was fine. Has anyone seen this behavior before?
My console has this message:
May 11, 2007 10:52:38 AM oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel getSelectedRow
WARNING: rowIterator is null
Message was edited by:
Wendy Tromp

Ok I found it,
My details iterator had the following properties:
<iterator id="AfdelingMedewerkersIterator" RangeSize="-1"
Binds="AfdelingMedewerkers"
DataControl="PRBAppModuleDataControl"
Refresh="IfNeeded" RefreshCondition="#{!adfFacesContext.postback}" />
I have no idea why I set it like that, but removing the Refresh properties fixed my problem.
I am still clueless as of why this led to the behavior as described above. I could have understood it if my iterator was not refreshed at all, but I have no idea why it stopped working only after the details were empty and not a second before...
Anyway, problem solved!

Table does not refresh after database level action

We have defined an Advanced table on a VO to represent invoice lines. The VO is referenced by a VL from the invoice header.
At one point during our process, a database level package is executed on the current lines. We have a "Requery" button to refresh the lines, however, the lines do not refresh unless we exit the invoice entirely and come back to it via the VL.
How can we refresh the lines on a current table after a database level transaction occurs?
Thanks, Jerry.
Our AM code is as follows...
// handleRefreshInvoiceLines( )
public void handleRefreshInvoiceLines()
OAViewObject vo = (OAViewObject)getInvoiceLinesVO1( );
if( !vo.isPreparedForExecution( ) )
getTransaction( ).validate();
vo.executeQuery( );
clearVOCaches( "InvoiceLinesEO", true ); // troubleshooting
} // handleRefreshInvoiceLines()

Thank you. I've moved clearCache around a bit. apparently vo.isPreparedForExecution() is false. I wonder why?
--Jerry.

T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

Hello,
I was able to reproduce the following problem on a T400.
- unattended installation of WXP-SP3 (slipstreamed)
- reboot
- install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
- reboot
At this point, the video driver is well configured.
- Reboot once or twice, video driver still good.
- Boot the T400 on WinPE 2.0
- Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
- Shutdown the T400, and reboot on C:\
- At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
Then I get an ATI error telling the driver is missing or not well installed.
- When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
(without re-installing the driver ...)
Anyone has an explanation ?
Please not I did not run "sysprep.exe" before capturing with ImageX.exe
stefan

Update on this problem.
After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
After rebooting the T400, the ATI driver was fine.
Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
Stefan

NWDS WebDynpro views are not refreshing after changes in layout...

Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JV

Hi Armin, thanx for your answer and effectively I have installed IE7, I read other posts and after reading the "solutions" I rather close and open my WD views insted of removing security patches of IE.. I guess I'll have to wait until SAP fixes this and meanwhile I'll work the way I just mentioned.
I'll let this question unanswered until this fix comes out.
Cheerio !
JV

Prompt constrain - prompt values are not refreshed after change in calendar

Hello,
I have prompt with Date, OrgUnit and Employee field in OBIEE 10g.
Date - calendar component "date between"
OrgUnit - multi-choice
Employee - multi-choice
I have checked "Constrain" checkbox on Employee field, because I want to show only employees from selected OrgUnit and also I have checked constrain on Date field.
After first selection everything works fine. I select some dates (I have calendar component - date between), some OrgUnit and I can see list of employees constrained by selected OrgUnit and Dates
- physical select is executed to get list of employees to multi-choice component
After that I change date interval, open employees multi-choice component but no physical query is executed and I will get back some cached result from previous request.
It seems that change in calendar component does not force refresh of data in other constrained components.
If I select some other OrgUnit, Employees are refreshed.
I tried to change component for Date from calendar to multi-choice. After some change of dates in multi-choice component. OrgUnit and also Employees are refreshed.
I also tried some different combinations of constrain checkboxes but with no success
So my question is: How can I force refresh (force execution of sql query) data in constrained fields after some change in calendar component?
Thank you

In my case It doesn´t refresh after change in calendar component. It does refresh after change in multi-select promot, or dropdown component, but doesn't refresh after change in calednar component.
BI server cache is not enabled.
If I open employee multi-choice component for the first time, physical query is executed. I change date to some other, open employee component for second time and no query is executed and I will get old values from previous action...

Visual composer report not working after change backend function ?

We already suffered from strange behaviour of visual composer reports totally not functioning at all at some times.
now I made a change in a function which is called in a function that is used by visual composer. after transporting the change the VC report is not working anymore (while the function itself in the backend is working fine)
how comes that the VC report is not working anymore after inside changes of the functions it calls ??
kind regards
arthur

As you have made changes to the function those changes wont be reflected to the VC.so you try to re call the function into VC then it will work fine.

Workbook not refresh after running Planning Function (BI-IP)

Similar Messages

Maybe you are looking for