Workbook not refreshing correctly

In the workbook when refreshing of a query is selected a message u2018SAP BEx: Jumping to target of type saved viewu2019 is displayed and then a new workbook is launched and a view displayed.
I insert a new query I get the same behaviour. The same view is displayed on all worksheets.
can any one please suggest how to rectify this issue with out recreating a new workbook.
Thank you,
Krishna

Hi,
Have select option refresh automatically in workbook settings .
Regards,
SAtya

Similar Messages

Login Window: Screen does not refresh correctly after waking 10.7.2 iMac and MacBook.

I have a client who brought to my attention that when we wakes his iMac and MacBook after the screen dims or sleeps at login screen, that sometimes the screen does not refresh correctly and you must use the cursor to basically "clear the screen." I have witnessed this myself and elimiated all third party products and this still happens. I am starting to believe that is is a bug in 10.7.2. Has anyone witnessed this or have any suggestions on how to remedy? Thank you.

Thanks lynque. It turns out I did need a keychain repair, but that didn't fix the problem. I probably should have done this earlier, but I ended up unplugging all peripherals (2 firewire + 3 USB) then powered up without issue.
So I shut down, plugged in one at a time, and ran into the problem again after plugging in an external hard drive (WD My Book Essential). I repaired with disk utility, but the problem remained.
I then rebuilt the partitions with Disk Warrior, and now everything seems to work....

Site Index Portlet is not refreshed correctly

I have deployed the Site Index Portlet in Portal 10.1.4, and it seems to work nicely. However, sometimes the portlet does not refresh correctly, even though other elements on the page (e.g. banner, page path) are updated. Refreshing the page with F5 in Internet Explorer 6.0 (or clicking the same link once more) refreshes the content of the portlet, but this is unacceptable for end users.
The same problem is not possible to reproduce in Firefox 1.5. If only all end users were using Firefox . . .
Any ideas for how to fix this for all browsers?
-- [email protected] [Senior Principal Consultant]
-- http://home.c2i.net/toreingolf/contact/

My browser caching is already set to "Every visit to the page", I'm afraid.
I was suspecting the PPE in Portal, but if that was the reason, then the problem would occur in all browsers, right? Or do you think this could be caused by how IE handles ESI?
Interestingly, the portlet works perfectly in Firefox (the menu is even updated immediately, before the new page loads!). And in Opera, the menu doesn't show up at all! What's going on here?

Workbook not refresh after running Planning Function (BI-IP)

Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
Supasake

Hi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D

IDAutomationHC39S font not refreshing correctly...

Hi
We are using IDAutomationHC39S font in our webi report. The font is not appearing correctly unless we go to edit mode. Once we edit the repot and run the font is displaying correctly.
Can i know how to resove this issue so that when user opening he will be able to see the correct font...
Thanks in advance..
Muthu

You may also want to search/ask in the forum specifically for PowerPoint problems:
http://www.officeformac.com/ProductForums/PowerPoint/

Workbook not showing correct filter but showing in drilldown.

Hi gurus,
I am using a BI 7.0 workbook.
We have done a change in the query and the same is not reflected in the workbook.
I got the following lead in one of the posts but somehow the settings are not being reflected in our system.
set return to query global definition by refresh ... if not, you can set this flag and refresh the workbook again. afterwards, the new query changes should be reflected.
Is it due to BI 7.0? Can anybody please help me on this ??
Regards,
Dennis

Hello,
Have you tried note 1259625? there are some corrections in this note that can be applicable in this case.
you can also try following: in the workbook settings go to the tab "data provider" and select the
data provider. Next click on properties and activate the option "Restore initial query view on refresh". When this is selected, the global definition of the query will be used and any changes on the query will be taken into account.
I hope this can help you.

List items do not refresh correctly.

In a form that i have developed there are two list items. I
want among others to chenge their appearance (background color
basicaly) according to witch one has th focus each time.
So I've put this code on the items, in WHEN-NEW-ITEM-INSTANCE
triger:
* LIST1
SET_ITEM_PROPERTY('LIST1',VISUAL_ATTRIBUTE,'SELECTED');
SET_ITEM_PROPERTY('LIST2',VISUAL_ATTRIBUTE,'GREYED');
* LIST2
SET_ITEM_PROPERTY('LIST2',VISUAL_ATTRIBUTE,'SELECTED');
SET_ITEM_PROPERTY('LIST1',VISUAL_ATTRIBUTE,'GREYED');
The Visual Attributes have the colors that i would like to
appear on the items.
This does not work (while it was working on Forms 5.0). It
seems to be a refresh problem, because when you open another
form that covers this one, or you minimize and maximize it the
colors are assigned corectly.
Thanks in advance for your help.
null

Panagiotis Lygnos (guest) wrote:
: In a form that i have developed there are two list items. I
: want among others to chenge their appearance (background color
: basicaly) according to witch one has th focus each time.
: So I've put this code on the items, in WHEN-NEW-ITEM-
INSTANCE
: triger:
: * LIST1
: SET_ITEM_PROPERTY('LIST1',VISUAL_ATTRIBUTE,'SELECTED');
: SET_ITEM_PROPERTY('LIST2',VISUAL_ATTRIBUTE,'GREYED');
: * LIST2
: SET_ITEM_PROPERTY('LIST2',VISUAL_ATTRIBUTE,'SELECTED');
: SET_ITEM_PROPERTY('LIST1',VISUAL_ATTRIBUTE,'GREYED');
: The Visual Attributes have the colors that i would like to
: appear on the items.
: This does not work (while it was working on Forms 5.0). It
: seems to be a refresh problem, because when you open another
: form that covers this one, or you minimize and maximize it the
: colors are assigned corectly.
: Thanks in advance for your help.
Hi Panagiotis Lygnos ,
I am not able to produce this problem. I create one form with
two list item ,two visual attribute & when-new-item-instance
trigger for these two list item as you have written above.
But List item background color of both list item is getting
changed according to witch one has th focus each time.
Even I tried to call this form from some other form still I am
getting correct result.
Can you just try by adding synchronize in the trigger of
both list item.
SET_ITEM_PROPERTY('LIST1',VISUAL_ATTRIBUTE,'SELECTED');
SET_ITEM_PROPERTY('LIST2',VISUAL_ATTRIBUTE,'GREYED');
Synchronize;
Bye
Mani/-
null

Workbook not refreshing dynamically through Function Module.

We have a workbook with multiple queries having common variable set.
we are trying to execute workbook from program, using the function module RSAH_LAUNCH_EXCEL. Also we are trying to assign variable values manually.
through the program, the workbook is getting executed but if i change the variable values inside the program manually, workbook is not getting refreshed. can someone help us.
the below is the code
REPORT ztest.
DATA: v_workbookid TYPE rsrwbindex-workbookid,
      v_subrc TYPE sy-subrc,
      ls_var TYPE rrx_var,
      lt_var TYPE STANDARD TABLE OF rrx_var.
v_workbookid = 'D0C1TB5M99SDPACEG070AFU88'.
ls_var-vnam = 'ZTEST_EXPORT'.
ls_var-vartyp = '1'.
ls_var-vparsel = 'P'.
ls_var-sign = 'I'.
ls_var-opt = 'EQ'.
ls_var-low = '10008891'.
ls_var-iobjnm = '0BPARTNER'.
APPEND ls_var TO lt_var.
CALL FUNCTION 'RSAH_LAUNCH_EXCEL'
    EXPORTING
     i_genuniid                       = lv_genuniid
      i_workbookid                     = v_workbookid
      i_objvers                        = 'A'
     i_hide_sapgui                    = 'X'
IMPORTING
    e_subrc =           v_subrc
    TABLES
      i_t_var                          = lt_var.
Thanks

Did you create your function module without problems...assigned the Z* function group? activate the function module? i assume that you copy the function module code and the variables definition on TOP include of RSAX_BIW_GET_DATA_SIMPLE
Regards
Message was edited by:
        Oscar Díaz

Dates not refreshed correctly

Hi,
We are using service contracts BT112H_SC from Web UI. From this component we are calling SAP GUI actions (using transaction launcher) to make changes to the contract u2013 like cancellations, date changes and so on.
We now have a problem with refreshing the Dates assignment block from service contract. The Dates assignment block is handled within a separate component called BTDATES and is called from BT112H_SC using component usage.
When running an action that should change the dates (due to for example an Annulation of contract), the status is set to Cancelled but the dates Contract end date is not changed. I am calling function module CRM_ORDER_READ_OW after the action is executed in some places and see that the dates are updated correctly in the buffer, but they are not showing up in the Web UI.
It seems as the dates are set correctly if I donu2019t expand the assignment block Dates before running the action. So if I expand the assignment block after running the action the dates are set correctly. If expanding the Dates assignment block before running the action, the dates are not updated.
The dates are also set correctly after saving the contract so it is just a matter of visibility.
Also if I (after running the action), go to one of the items and expanding the Dates assignment block on item level and then go back to header level the dates are displayed correctly.
I have enhanced component BTDATES/Dates u2013 Method DO_PREPARE_OUTPUT where I use the following commands that should refresh the values.
me->typed_context->btdate->collection_wrapper->publish_current( ).
lr_ent ?= me->typed_context->btdate->collection_wrapper->get_current( ).
lr_ent->reread( ).
I have also used the command modify without success.
Somehow the BTDATES component must be refreshed to read the dates from the buffer correctly after the action is executed.
Do anyone have any suggestions on how to handle this?
Regards Andreas

Hi,
Thanks a lot for your answers. I need all input I can get.
Kathirvel: I can see that event 0002_expand_link is triggered (from class ZL_BT112H_S_MAINWINDOW_IMPL I believe) when expanding the Dates assigment block. But I cannot figure out what is happening next.
But after expanding the assignment block once, the event is not triggered if I expand/collapse the assigment block again.
I see that in CL_BSP_WD_VIEW_MANAGER ~ DO_FINISH_INPUT when expanding Date assignment block, a BOL_CORE->MODIFY statement is made. This code is triggered when expanding the Date assignment block (but only first time).
Do you know which event I could call to trigger the update again?
asen2222 : I entered the code lr_core->modify( ) in ZL_BT112H_S_OVVIEWSET_IMPL ~ DO_PREPARE_OUTPUT which is called after my action is executed and the dates are modified in the buffer. But it doesn't work. When debugging the modify( ) method it seems as it have no delta-information to save.
I have also tried setting the statement in component BTDATES - ZL_BTDATES_DATES0_IMPL ~ DO_PREPARE_OUTPUT without success.
In the same place - component BTDATES - ZL_BTDATES_DATES0_IMPL ~ DO_PREPARE_OUTPUT - I also put the following code:
lr_ent ?= me->typed_context->btdate->collection_wrapper->get_current( ).lr_ent->reread( ).
This do not work either. But if I debug the reread method and go into
method REREAD_ENTITY of CL_CRM_BOL_CORE I see following code:
lv_relation_cacheable = me->object_model->relation_is_cacheable(
lv_parent_relation_name ).
If I then set lv_relation_cacheable = ' ', it seems to bypass the buffer and read the data from underlying layers. And then the values is showingcorrectly updated!.
I believe it is reading the relation from table CRMC_ORLSTA_BTIL but this
table do not include field DO_NOT_BUFFER so I assume this field should
never be set for business transactions. But in this case it wouldhave worked for us.
Regards Andreas

Cascading LOV in af:table will not refresh correctly

Jdeveloper version 11.1.1.5.0
I have spent quite a bit of time trying to understand why 2-level cascading LOV won't work in a particular situaion. I still haven't been able to fix it and so I turn to the ADF gurus on this forum.
Here's the scenario:
1. I have a ViewObject called AdjustDeltaValuesView. This VO contains attributes from its entity. It also has transient attributes called CategoryId and CodeId.
2. There is LOV defined for CategoryId for VO CodeCategoryMasterView
3. There is LOV defined for CodeId for LimitedCodeMasterView.
3. View Criteria is created for LimitedCodeMasterView which sets a bind variable value from CodeCategoryMasterView.CodeCategoryId.
4. I have wired all the LOVs correctly and it is working properly in ADF BC tester.
5. In the UI, I have dropped AdjustDeltaValuesView data control as ADF Table where CategoryId and CodeId are displaying as af:selectOneChoice.
6. CategoryId has autoSubmit=true and CodeId has partialTrigger set to component ID of CategoryId.
7. The LOV inside editable af:table is working fine except one scenario that when user selects same categoryId from the category LOV in the second row, the CodeId LOV will not populate.
Here's the code snippet of jspx:
        <af:table value="#{bindings.AdjustDeltaValuesView1.collectionModel}"
                  var="row" rows="#{bindings.AdjustDeltaValuesView1.rangeSize}"
                  emptyText="#{bindings.AdjustDeltaValuesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                  fetchSize="#{bindings.AdjustDeltaValuesView1.rangeSize}"
                  rowBandingInterval="0"
                  selectedRowKeys="#{bindings.AdjustDeltaValuesView1.collectionModel.selectedRow}"
                  selectionListener="#{bindings.AdjustDeltaValuesView1.collectionModel.makeCurrent}"
                  rowSelection="single" id="t1" editingMode="editAll"
                  rendered="false">
          <af:column sortProperty="CategoryId" sortable="false"
                     headerText="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.label}"
                     id="c25">
            <af:selectOneChoice value="#{row.bindings.CategoryId.inputValue}"
                                label="#{row.bindings.CategoryId.label}"
                                required="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.mandatory}"
                                shortDesc="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.tooltip}"
                                id="soc3" autoSubmit="true">
              <f:selectItems value="#{row.bindings.CategoryId.items}" id="si3"/>
            </af:selectOneChoice>
          </af:column>
          <af:column sortProperty="CodeId" sortable="false"
                     headerText="#{bindings.AdjustDeltaValuesView11.hints.CodeId.label}"
                     id="c27">
            <af:selectOneChoice value="#{row.bindings.CodeId.inputValue}"
                                label="#{row.bindings.CodeId.label}"
                                required="#{bindings.AdjustDeltaValuesView11.hints.CodeId.mandatory}"
                                shortDesc="#{bindings.AdjustDeltaValuesView11.hints.CodeId.tooltip}"
                                id="soc4" partialTriggers="soc3">
              <f:selectItems value="#{row.bindings.CodeId.items}" id="si4"/>
            </af:selectOneChoice>
          </af:column>For example, where it DOES NOT Work
1. User selects Category A from dropdown from the first row.
2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
3. user selects Code X from the dropdown.
4. User selects Category A from the dropdown from the second row.
5. PROBLEM: In the second row, Code Id dropdown does not populate. Code dropdown is empty.
Where it works:
1. User selects Category A from dropdown from the first row.
2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
3. User selects Category A from the dropdown from the second row.
4. In the second row, Code Id dropdown populates correctly.
Where it works:
1. User selects Category A from dropdown from the first row.
2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
3. user selects Code X from the dropdown.
4. User selects Category B from the dropdown from the second row.
5. In the second row, Code Id dropdown populates correctly.
Has anyone come across this scenario? It's a very weird problem.
I hope I have explained this well. If it's not clear please let me know.
Edited by: Shah23 on Jan 14, 2013 6:42 PM
Edited by: Shah23 on Jan 15, 2013 9:09 AM

Hi,
Always mention your JDev version.
Try modifying your VOs as explained in this blog and see if it works fine : https://blogs.oracle.com/aramamoo/entry/how_to_create_multi_level
-Arun

JRadioButton setEnable(false) not refreshing correctly

I have a JFrame class that implements customerConfigurationPanel with a ComboBox with 2 Radio Buttons in a button group. I have created a CustomerConfiguration class that represents the cutomerConfigurationPanel. The JFrame class is an Observer of the CustomerConfiguration class. Here is where it gets tricky, I use the JComboBox to set the CustomerConfiguration class and when I do a setVar() it notifies the JFrame class that it has been updated. At this point I enable or disable the RadioButton based on the CustomerConfiguration class. The issue is that the RadioButtons do not grey out correctly or in any pattern that I can tell. I have tried repaint on the JFrame and the panel, I have tried validate(), invalidate(), and revalidate() to stop and start the panel while I am updating the JRadio Buttons. I need to stop the JFrame or Panel, set the state of the JRadio Buttons, and start the panel again. I have a lot of code in place so its not very easy to put an example in place but Ill start working on it to give an example.
The problem in its most basic form is that I have a JRadio Button in a button group that doenst grey out correctly.

Here is a sample of the code I am using: I have a button that may or may not be setSelected in a previous state. So I want to clear the button state and reset it to the new state. In this example I have a radioButton group Truck/Trailer and I want to clear both buttons, set Trailer so it is not selected and then not enabled and then set Enable Truck and select truck. I belive the code is correct but the behavior is not. I have this same code just 10 lines later in my program and it works everytime. I think its a timing issue with repainting of the container somehow. Also if I use isVisible() instead of setEnabled() it works everytime.
jrbTrailer.setEnabled(true);
jrbTrailer.setSelected(false);
jrbTrailer.setEnabled(false);
jrbTruck.setSelected(true);
// None of these work
//jrbTrailer.repaint()
//jrbTrailer.revalidate()
//jrbTrailer.validate()

UWL do not refresh correctly when leave request change status

hi
I implemented the standar workflow of "Leave Request"(succesfuly), and the leave request appareced in UWL in MSS, I approved the leave request, but Leave Request is not change the status. But The employee of the leave request watch the new "status" with approved in the ESS option (Leave Request).
I refresh the UWL but Leave request stills appears with status "new", I clicked in the Leave Request (it had already approved in the previous step) and the new window open with error "index 0,0".
My questions are:
1. How I can refresh my UWL? and that I displayed the request approved
2. Why not change your status to approve the leave, if I do not get any error?
thanks for your post and answers
Ivan

implement the note 1501377 which was created to clear the leave request workitems
ensure it is done
and then following settings, In SWU3 schedule background jobs
in uwl administration you can set these
Default Execution Mode: Optimistic
Webflow User Format: Full Name
Default Cache Validity Period, in Minutes: 2
Maximum Number of Threads Created in the Thread Pool: 10
Timeout Value for the Connected Systems, in Seconds: 60
Please check how frequent you refresh your cache
1.,,Open task in the same window in the portal - rather than opening in
a new window when approving and rejecting tasks. This is so that the
actions will be controlled through the UWL UI rather than an external
window.
2.You can configure an additional column on the UWL UI called
isLaunched to mark an item that were already executed and may have been
completed already. This is very similar to the marked as read
functionality contained in an email client. If a user opens a task the
item will be marked as launched. If refresh happens either manually or
automatically then the workitem may be completed (marked as launched)
and disappears from the inbox. If it has been opened but not completed
the launched icon disappears.
3. Is Delta Pull enabled in your system?
Steps to clear the UWL cache
please go to "System Administration" "System Configuration" ->
-> Universal Work list & Workflow
-> Universal Workflow Administration
-> Click on cache administration page
-> Click "Clear Cache" button.

Webi document prompts order from Java SDK does not refresh correctly?

Hi
I'm developping a standalone command-line Java program which will schedule a report with custom prompt values.
I am having a problem with Webi prompts ordering acquired from the SDK.
We are running BO XI R2 SP4 under Windows on Tomcat servers.
Here is the problem:
I have a Webi report called "Articles Racines" in a "Tests SDK" directory.
This report uses two prompts named "Type Article :" and "Code Marque :" (in this order).
Java SDK (code below) returns the right prompts in the right order.
Now, in Infoview, I modify the report in order to change the order of the prompts (in the "Properties" tab) making "Code Marque :" the first and "Type Article :" the second one and save the changes.
When I run the report, prompt order has changed but the prompts retrieved from the Java SDK are still in the old order.
I noticed that if I update the name of both prompts, the prompts retrieved from the SDK now are in the right order (with the updated names).
Am I doing something wrong? Is it a known issue?
Thanks in advance.
Guillaume
PS : I am aware that "select *" are very bad but I am still in research stage of developpment.
TestsScheduler.java:
import java.util.Iterator;
import java.util.List;
import java.util.StringTokenizer;
import com.businessobjects.sdk.plugin.desktop.webi.IWebi;
import com.businessobjects.sdk.plugin.desktop.webi.IWebiPrompt;
import com.crystaldecisions.sdk.exception.SDKException;
import com.crystaldecisions.sdk.framework.CrystalEnterprise;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import com.crystaldecisions.sdk.framework.ISessionMgr;
import com.crystaldecisions.sdk.occa.infostore.IInfoObject;
import com.crystaldecisions.sdk.occa.infostore.IInfoObjects;
import com.crystaldecisions.sdk.occa.infostore.IInfoStore;
public class TestsScheduler {
     public static void main(String[] args) {
          String cms = "XXX";
          String username = "XXX";
          String password = "XXX";
          String authentification = "secEnterprise";
          String reportPath = "/Tests SDK/Liste des racines";
          try {
               ISessionMgr sessionManager = CrystalEnterprise.getSessionMgr();
               IInfoObjects objects;
               // Connexion
               System.out.println("Connexion à "+ username +"@"+ cms +" ("+ authentification +") en cours...");
               IEnterpriseSession session = sessionManager.logon(username, password, cms, authentification);
               System.out.println("Connecté à "+ session.getCMSName());
               // Récupération de l'infoStore
               IInfoStore infoStore = (IInfoStore) session.getService("InfoStore");
               // Récupération des informations d'un report
               StringTokenizer st = new StringTokenizer(reportPath, "/");
               int reportID = 0; // Le dossier "Dossiers Publics" est la racine (/)
               IInfoObjects infoObjects;
               IInfoObject infoObject;
               do {
                    String token = st.nextToken();
                    System.out.println("Recherche de l'objet '"+ token +"' en cours...");
                    infoObjects = infoStore.query("select * from CI_INFOOBJECTS where SI_NAME = '"+ token +"' and SI_PARENTID = '"+ reportID +"'");
                    if(infoObjects.size() != 1) {
                         throw new Error("Le dossier SI_ID='"+ reportID +"' possède "+ infoObjects.size() + " fils nommés '"+ token +"'.");
                    infoObject = (IInfoObject) infoObjects.get(0);
                    reportID = infoObject.getID();
                    System.out.println("Trouvé l'objet SI_ID='"+ reportID +"' nommé '"+ infoObject.getTitle() +"'.");
               } while(st.hasMoreTokens());
               if(infoObject instanceof IWebi) {
                    IWebi webi = (IWebi) infoObject;
                    List prompts = webi.getPrompts();
                    System.out.println("Le rapport Webi possède "+ prompts.size() +" invite(s).");
                    for(Iterator itPrompts = prompts.iterator(); itPrompts.hasNext();) {
                         IWebiPrompt prompt = (IWebiPrompt) itPrompts.next();
                         List values = prompt.getValues();
                         System.out.println("     L'invite '"+ prompt.getName() +"' possède "+ values.size() +"' valeur(s).");
                         for(Iterator itValues = values.iterator(); itValues.hasNext();) {
                              Object value = itValues.next();
                              System.out.println("          Valeur='"+ value +"'.");
               // Déconnexion
               System.out.println("Déconnexion en cours...");
               session.logoff();
               System.out.println("Déconnecté");
          } catch(SDKException e) {
               throw new Error("Erreur lors de la connexion : "+ e.getMessage());
Edited by: Guillaume L on Dec 10, 2008 3:22 PM

Here's the reason why:
Web Intelligence document prompting is handled properly if you open the doc using the ReportEngine Java (REBean) SDK.
When you set prompts and schedule, you'd first open the doc using REBean, set the prompts, then copy over the prompt values you've set to the IWebi you're scheduling using the PromptsUtil.populateWebiPrompts(...,...) helper method.
So the InfoObject IWebi doesn't know about the actual ordering of the prompts in the document itself - it's just receiving the prompts in order as it's fed from PromptsUtil.
It's not recommended to assume that the IWebi.getPrompts() will return a non-empty collection. The Web Intellligence document must be first opened in ReportEngine and the prompting values set using PromptsUtil to fill the collection.
Sincerely,
Ted Ueda

IE does not refresh correctly what is wrong?

I've created a new java class "ShowDocument.class" and ran it once throw an htm file "ShowDocument.html" using IE Explorer 6.0.2
First time loaded correctly, then I modified the source code ShowDocument.java and recompiled it and viewed it using appletviewer and it showed my new changes.
but IE insist to show the old class that first loaded.
I did the following:
1) remove the class completely and did the new compile cycle and try to load a brand new instance of IE.
2) search for all classes in the "my computer" drives and deleted any cashed ShowDocument.class.
3) from the tools menu, internet options, I deleted all the files, including offline contents
All these trials passed without any success.
Any idea?
thanks!

when I recompile something I always just close the browser and restart it, and it works fine. If I don't close it, it uses the old class. Moving on, you can clear the java plugin cache by going to Control Panel (assuming you're using windows), then click on the java plugin icon. When that's opened, go to the Cache tab, and click "Clear Cache."

I attempted to download a song. It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

Hello Whitney262,
Thanks for using Apple Support Communities.
I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases. The article below will walk you through the entire process:
Download past purchases
http://support.apple.com/kb/ht2519
Take care,
Alex H.

Workbook not refreshing correctly

Similar Messages

Maybe you are looking for