Workbook not showing correct filter but showing in drilldown.

Hi gurus,
I am using a BI 7.0 workbook.
We have done a change in the query and the same is not reflected in the workbook.
I got the following lead in one of the posts but somehow the settings are not being reflected in our system.
set return to query global definition by refresh ... if not, you can set this flag and refresh the workbook again. afterwards, the new query changes should be reflected.
Is it due to BI 7.0? Can anybody please help me on this ??
Regards,
Dennis

Hello,
Have you tried note 1259625? there are some corrections in this note that can be applicable in this case.
you can also try following: in the workbook settings go to the tab "data provider" and select the
data provider. Next click on properties and activate the option "Restore initial query view on refresh". When this is selected, the global definition of the query will be used and any changes on the query will be taken into account.
I hope this can help you.

Similar Messages

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

HT1918 I am not able to update my acct. it tells me to correct errors, but shows on errors.

I am unable to update my acct. I have a new last name and credit card. It tells me to correct errors but shows no errors
Lauren Allen-Pilasiewicz

mabelmay777 wrote:
I am unable to update my acct. ...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Application is not displaying correctly and is showing as incomplete

please i really need help i am not understanding this at all i need to send them as pdf files because there application forms I have an issue when it comes to sending the pdf files to someone else and they open the file to then tell me that the text on your application is not displaying correctly and is showing as incomplete.
how do i fix that, they are opening it up using adobe 11 the same as I.

Hey Robert,
Please let me know what OS are you using and ensure whether you are using Adobe Acrobat or Adobe Reader to view PDF files.
Also, tell me whether the recipient downloads the file first and then open in Reader or opens it in the browser only.
Please clarify to me whether you are getting this error pop-up or the recipient?
Hope to get your response.
Regards,
Anubha

ICal download for Jewish holidays will not populate iCal calendar but shows up on "Subscription" section of list of calendar

iCal download for Jewish holidays will not populate iCal calendar but shows up on "Subscription" section of list of calendars. Help?

I am having the same issue, as is my husband and a friend. We have both been subscribers to this calendar for several years and as of Jan 1 it no longer populates iCal. I have subscribed to it again but, while it shows up in subscribed calendars it still does not populate. I would appreciate some help.

XSAN 2.2 Don't Show a Volume but Show a LUNs and When I click mount, XSAN Admin will Quit any time ?

Hi all
I'm a new staff for XSAN 2.2 , I have a ptoblem is XSAN Admin not show a Volume but Show a LUNs. and then I click Mount it will Quit a Window.
I test Import old Config file . It has a same thing.
please answer thx alot
^ ^

thank for solutions , I can't to see any Volumes when I click on "Volumes" on the left column of Xsan admin.
and last queston, Why a Xsan admin quit when I click a Mount on the left column?
^ ^

Added Styles to BC Module Stylesheet, Firebugg shows correct style but not affecting on display?

I have set up a style on the BC module style sheet (on bottom of sheet) for my blog, the issue is specifically for the blog body text. Trying to get the text to display in white. When I update the style sheet and view the site in firefox and then inspect the body of the blog, the style I made is showing correctly IN firebug but the text is still black. It is not changing color. Here's my style code:
.post-body {
    color: #fff;
    font-family: Arial,Helvetica Neue,Helvetica,sans-serif;
    font-size: 16px;
    line-height: 1.2;
    word-wrap: break-word;
    text-rendering: optimizelegibility;
All my other styles for heading, details, sidebar, etc are working as intended. Just can't get the body font color and size to change. Another wierd thing, when I change the font size px for the style it changes the line spacing NOT the font size. Any one have a clue what is going on here? Here's the custom styles I have added to the module style sheet:
/* My BC Template*/
.blog-container h1{
    font-family: Impact, Haettenschweiler, "Franklin Gothic Bold", "Arial Black", sans-serif;
    font-size: x-large;
    color: #F9D100;
.post-title H2{
    font-family: Arial Black, sans-serif;
    font-size: medium;
    color: #F9D100;
.side-panel H4{
    font-family: Arial Black, sans-serif;
    font-size: medium;
    color: #F9D100;
.post-body {
    color: #fff;
    font-family: Arial,Helvetica Neue,Helvetica,sans-serif;
    font-size: 16px;
    line-height: 1.2;
    word-wrap: break-word;
    text-rendering: optimizelegibility;

This answer from Support cured the problem...
Gaurav Sharma (Adobe Business Catalyst Support)
Feb 20 04:12 (EET)
Thank you for contacting us!
I just see your online shop purchase form, which contains update credit card fields,
http://screencastmb.worldsecuresystems.com/img/2013-02-20_1309.png
As per the field description, it's used fo rupdating CC details, not for purchases.
Remove that system field and reinsert the form, and it should then work
Kind Regards

Primary index does not exist in database but shows in SE14?

I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
When I checked the Runtime object - it is OK.
When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
pl advise.
(reposting here)
Edited by: Venkatabby on Mar 26, 2008 4:05 PM

hi,
To create a index for a table,
go to se11->click on Indexes tab and create a primary index.
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
reward points if useful.
regards
sandhya

IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it. I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
Please, I would absolutely love the help, i'd be eternally grateful for it.
-Tyler

Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

Ipad says I'm not connected to internet but shows that I am

The internet icon shows as connected but when I go to iTunes, App Store or Maps it says I am not connected

What is the IP in Settings/Wi-Fi? Tap the arrow on the right of the name of your network. If it is 169... than you are not really connected to the Internet.

IPod Touch 2G not in recovery mode, but shows recovery screen

So, I was trying to get the iPod recovered to 4.2.1, but when I tried updating, it said "This iPod can not be restored" So I thought that was it, but then the iPod stayed at the recovery screen, but it wouldn't be recognized by iTunes. It also isn't in the actual recovery mode. I already went through the Apple Express Lane, but it didn't help at all. Anyone have some advice???

I've tried to put it in DFU, but it wouldn't work.. It would just go back to the screen and the iPod would still not be recognized by iTunes. Any other solutions?
EDIT: After restarting my computer, it still doesn't show in iTunes, but at least Windows recognizes the USB now...

New tab does not come up blank but shows firefox unable to bring up web site in box

Pressing + on Tab bar does not come up blank, but comes up as Server not found Firefox can't find the server at www.
then various letters and symbols oki.com
How do I get rid of this to enable a blank page or nine illustrated tabs to come up, as on my other laptop?

You won't see the SearchReset extension in "Tools > Add-ons > Extensions" because the code only run once and the extension automatically uninstalls itself, so this is expected behavior.
You can check for problems with preferences and rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can try to create a new profile or reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If you reset Firefox then a new profile is created and some of your data (bookmarks, history, cookies, passwords, form data) is automatically imported and your current profile will be moved to the desktop (Old Firefox Data).
You will lose extensions and other customizations (toolbars, prefs) that you've made.
It is possible to recover more data from the old profile, but be cautious to avoid carrying over the problem.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Iphoto shows correct thumbnail but does not show master photo or shows wrong master photo

iPhoto has been working fine for me for 2 years. But yesterday I started noticing problems with the photos when scrolling thru all the photos in an event.
When viewing the event, I can see all of the correct thumbnails for the photos in the event. But when I open the individual photos, some photos look fine, but others don't display at all (if I had added faces in the photo the frames for the faces show up on a black background). If I swipe to scroll through the photos, the correct photo is displayed for less than a second and then is replaced by the last photo and gets either stretched or shrunk to be the same size as the photo that should be displayed. If I view the actual file in the Finder, the master image looks perfectly fine.
I have tried repairing and rebuilding the database and neither one fixed the problem.
My software is up to date also.
I would like to export all of the photos from iPhoto to a different directory and just manage them myself, but I can't find an export feature in iPhoto.
Anyone having the same issues with iPhoto or know of a way to easily export the photos? Or can I just move the masters to a directory outside of iPhoto?

You have tried repairing and rebuilding, but have you also tried to recreate the thumbnails from the same First Aid panel?
Or rebuilding using iPhoto Library Manager?
I would like to export all of the photos from iPhoto to a different directory and just manage them myself, but I can't find an export feature in iPhoto.
To export your photos from iPhoto read Terence Devlin's user tips on this page:
https://discussions.apple.com/community/ilife/iphoto?view=documents
The "Export" command is in iPhoto's "file" menu. You will want to export the original files and the edited versions.
Exporting From iPhoto
How to Access Files in iPhoto

A div in a site am developing is not showing in firefox but shows on all the other browsers (chrome, safari, opera and explorer), can anyone help?

i am developing a site and i used divs in making the arrangements.
all other divs on the page shows but on particular one does not show.
i gave all the divs a border with a red color, all the other browsers(explorer, opera, chrome and safari ) shows the divs with the colors but firefox does not even show the red color

Can you post a test case demonstrating the problem? It doesn't need to contain confidential content or active links. (This forum doesn't handle raw HTML very well, so I don't recommend pasting code here unless you convert your angle brackets to HTML entities.)

IMac G4 says it's not connected to Internet but shows it is...

Hi, I'm not even sure I'm in the right place, but I have a few questions.
At first when I connected my iMac G4 to the Internet it kept giving me "there is an error connecting to "XXXXX" network" type thing.
Now, since I pressed Cmd, Option, O & F and did the rest-nvram and reset-all, when it boots it is showing it is connected to the internet but as soon as I've clicked network diagnostics and tried to go through that dialog box it will disconnect me from the wireless connection and go back to the error dialog mentioned above.
I just bought this, though the Airport Card was wacky so I replaced that.
It recognizes it in the "About Mac" "More Info" "Network" thing.
I've troubleshooted this beyond belief, and I need a more in depth help than just a simple "try restarting the computer"
"try restarting the router"
I have tried this with several routers, all different internet connections, the whole nine yards.
HELP ME PLEASE, I AM SO FRUSTRATED!

I just bought this, though the Airport Card was wacky so I replaced that.
It recognizes it in the "About Mac" "More Info" "Network" thing.
So, you have tried two Airport Cards? Both have not worked?
I'd turn off encryption for testing. The card is rather slow. 10mhz.
Might be best to pack the cards in and try a usb dongle.
Ethernet Bridge
Ethernet Bridge "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network." from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1
This linksys bridge is the safest solution since it doesn't require any Mac OS drivers.
Airport ExpressAirport Express is an external unit and you can configure it as a bridge. 802.11n ( I bevieve you will need a more modern version of Mac OS X to configure. Sadly, Apple uses a configuration program to configure, not a web browser. )
USB dongle
Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 'n' speed is the newest and fastest. $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
You better give OWC 1-800-275-4676 a call to verify that these USB dongles will work with 10.3.
You would be better off with the more expensive dongle. The letters n/g/b correspond to the speed of the data transfer. You should match the speed to your existing router. You best match on the highest speed. N is the highest. G is middle. b is lowest.
Robert

Workbook not showing correct filter but showing in drilldown.

Similar Messages

Maybe you are looking for