Workbook when refreshed loosing formatting

Hi All,
We have a workbook when run giving data properly, but the same when refreshed loosing the formatting. i.e. the data is being displayed but the cells are not highlighted and colours of the cells not displayed etc.
Please let me know if anyone faced similar issue and the solution.
Thanks
Hima Bindu

Hi Veerendra,
It Worked with small changes.
I had to go to the design mode of the Workbook. Right click on the Analysis Grid-> Properties -> Check the box Apply Formatting
and save the workbook.
Thanks a lot.
Hima Bindu

Similar Messages

  • Workbook not refreshing correctly

    In the workbook when refreshing of a query is selected a message u2018SAP BEx: Jumping to target of type saved viewu2019 is displayed and then a new workbook is launched and a view displayed.
    I insert a new query I get the same behaviour. The same view is displayed on all worksheets.
    can any one please suggest how to rectify this issue with out recreating a new workbook.
    Thank you,
    Krishna

    Hi,
    Have select option refresh automatically in  workbook settings .
    Regards,
    SAtya

  • Error when refreshing workbook in BEx: Specific Macro CallBack not found

    One of our users is getting the following error when refreshing any BEx workbook (in BI7):
    Problems while calling the exit on refresh: Specified Macro 'CallBack' is not found in the workbook
    This error suddenly started this week, everything was fine before that, and no changes have been made to the user's PC. The problem is specific to this one user's PC.
    Any ideas?
    -Jason

    Hi,
    It seems a common error.
    There is a note that mentions the error, and was fixed since BI addons SP 8
    Note: 1267942 -  Custom macro not being executed on a workbook
    Download and test the latest version: bi710sp12_1200-10004472.exe
    This should fix the issue.
    FYI: SAPGUI 640 is not supported by SAP since 2008. If you are using this version, please download the SAPGUI 7.10 as well.
    Thanks
    Edward John

  • The hidden columns of wrokbook will appear when refresh the workbook

    Hi,expert.
      I create a query,the query has 3 columns,
    Fields Name: Col_A, Col_B, Col_C
    Fields Value:  1001.....001 ...  X       
    I want to connect the Col_B and Col_C, so I add a column Col_D, like this:
    Fields Name: Col_A, Col_B, Col_C, Col_D
    Fields Value:  1001 ... 001 .. ..X  .... ..001X
    and then I hidden Col_B and Col_C in the excel. save the query as a workbook.
    When I open the workbook,and refresh it,the hidden Col_B and Col_C were appear.
    PLZ tell me how to hide the columns Col_B and Col_C, If I refresh the workbook,they will be hidden either.
    My BEX Analyzer version is BI AddOn 7.x(based on 7.10), Support package 8, Revison 1408.
    TKS.
    Edited by: Bruce Wang on Jul 26, 2010 11:28 AM
    Edited by: Bruce Wang on Jul 26, 2010 11:29 AM

    Hello Bruce,
    As mentioned by others.
    If it is possible, try to hide these two columns in the query designer.
    If there are few calculaions need to be done in excel with these fields, then include a macro to the hide these columns.
    You need to include the code to hide these columns to the exit macro 'call back'.
    Hope this helps.
    Regards,
    Hari

  • F4 Help list not showing values when a BEx 7x workbook is refreshed

    Hello All,
    Hope you are doing good. I have a very peculiar behaviour with F4 functionality of a variable while refreshing a workbook and thus requesting for your help.
    The workbook contains two queries. Both of these queries contains a common variable (of common characteristic).
    Info_Provider
    Query_Name
    Characteristic_Name
    Variable_Name
    Multi_Provider_1
    Query1
    Char1
    Var1
    Multi_Provider_2
    Query2
    Char1
    Var1
    When Query1 and Query2 are refreshed individually, the variable Var1 (basically a plant variable) shows the help list values.
    But when the workbook is refreshed (that's when both the queries gets executed together with a common variable screen) and
    upon clicking the help list of the variable Var1 doesn't show any values.
    Additional Info:
    1. Both the variables are configured to show data from Master table.
    2. The same set up works fine in 3x and also for other similar variables.
    Has anybody come across of this situation? If so, what is the issue and what was the solution?
    Pls share.
    Thank you.
    Lohith

    We recently had a similar issue with a variable... turns out the RSR_VARIABLE_F4_RESTRICT_BADI BADI was activated for this variable (and the code was no longer "valid" with the current situation).
    You may want to check whether you have that BADI activated.

  • When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    Add this one to the list of thinks that don't work on the Apple Job Board. It looks like Apple is using ADP's VE (Virtual Edge) technology to run this system, and I've been stupified by the number of features that are just broken, or so poorly thought out by ADP as to be unusable, (certainly for webkit and mozilla browsers at least: I didn't bother checking IE.)
    Here are a few highlights:
    "My Job List", list of jobs applied for, seems to max out at three. You can apply for more than that, but you can only see the first three.
    "Search Using Your Resume" feature yields few or no results, even when the pasted text contains only common, exactly matched words like 'Design' or 'Engineer'.
    The missing resume upload, described in this thread.
    "My Job Agent" seems to never flag anything, at least it hasn't ever for me despite pretty loose criteria.
    Agent's created using "My Job Agent" eventually just disappear, which is fine because they don't seem to work.
    When updating a profile, acknowledging the 'Terms' happens twice in a row. 
    Job seekers can only supply one cover letter despite being able apply for several jobs.
    Pagination for search results only appears at the top of the page, so it's necessary to scroll down through each page, then up to the top again to proceed to the next page.
    Well, I'm sure there are others, but you get the idea. I hope the Apple folks can fix this, (or twist ADP's arm to fix it,) so it better represents the quality of experience that Apple is so respected for consistently delivering.

  • Workbook is refreshing for 3 hour's which normally takes  20 to 25 minutes

    Hi All,
    I am working on one workbook which contains 10 querry's.
    Problem: Recently from couple of weeks same workbook is refreshing for 3 hour's which normally takes  20 to 25 minutes previously. Version we are using is BW 3.5
    please provide some information and let me know any steps to resolve the issue.
    Thanks,
    Loki

    Identify whether any particular query causing undue delay. You can try to fill the cache for this query in night job or you can use RSRT to fill the cache for the query.
    Check the settings in the workbook, Right click properties, Interaction tab, Refresh workbook when query is refreshed setting is check marked
    Check any change happened to any dependent infoproviders from the date you are facing the trouble

  • Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

    MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
    32 GB RAM
    ATI Radeon HD 5770
    OS X 10.7.5 Lion
    I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
    On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
    Best regards.
    1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
    2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
    3. I have purchased a third WD Caviar Black 2 TB HDD.
    4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
    5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
    6. On starting the system, it will report to initialize the new drive.
    7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
    8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
    9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
    10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
    10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
    10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
    10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
    11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
    12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
    13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
    14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Error when refreshing WEBI report with Universe Connection Type "SSO"

    Hi Experts:
    We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
    However got the error of "incomplete logon data" after all the configurations done following below blogs:
    SNC Part 1
    /people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
    SNC Part 2
    /people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
    We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
    The SNC settings are:
    - AD Account: service.test.bobj (all lower-letters)
    - 32-bit gsslib on the BO server, and 64 bit on the BW server side.
    - SNC0: p:service.test.bobj at DOMAIN
    - SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
    - Entitlement system tab --> username: BO_Service
    SNC Name: p:service.test.bobj at DOMAIN
    - SNC settings tab:
    SNC Lib: c:\winnt\gsskrb5.dll
    Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
    In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
    I found a few threads on the same topic, but they are all not answered:
    SNC Client side configuration error
    SNC Configuration Error: Incomplete logon Data
    Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
    Thanks in advance!
    Regards,
    Jonathan

    Hi Ingo,
    Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
    What we did is:
    1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
    2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
    3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
    Can you please help? Thanks a lot!
    Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
    Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
    Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
    Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
    Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
    Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
    Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
    Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
    Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
    Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
    Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

  • Hard Drive "Input Output" Error When Attempting to Format

    A friend just gave me a nice PowerBook that seems to be in need of a fresh OS and when attempting to format the hard drive I am getting an "Input Output" error.  Any suggestions to overcome this issue and format the drive?

    Hi all,
    I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
    It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
    http://www.apple.com/support/macbook/hd/repairextension/
    Doh! Too late?
    So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
    Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
    https://discussions.apple.com/message/16090313#16090313
    I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
    https://discussions.apple.com/message/16081818#16081818
    So, what can the problem be?!?!?!?!?
    In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
    https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
    Can anyone confirm this?

  • Error when refreshing web intelligence document less then every minute

    Hi all,
    I get the following error, when refreshing document via javascript more often then every minute:
    Server Error in '/Dashboard' Application.
    FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: BusinessObjects.Enterprise.OcaFramework.ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
    Source Error:
    Line 121:               
    Line 122:                    //Session["StorageToken" + strDocId] = doc.StorageToken;
    Line 123:               doc = reportEngine.OpenDocument(intDocID);
    Line 124:               //doc = reportEngine.GetDocumentFromStorageToken(storageToken);
    Line 125:               doc.Refresh();
    Source File: c:\inetpub\wwwroot\dashboard\document.aspx.cs    Line: 123
    Stack Trace:
    [ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
       at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)]
       BusinessObjects.ReportEngine.WI.Internal.Server.OCCA._WICDZProxy.initInstance(Byte[] p0, UTF8StringHolder p1)
       BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
    [CommunicationException: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236)]
       BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
       BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.InitInstance(String clientInfo)
       BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
       BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.OpenDocument(Int32 documentId)
       Dashboard.document.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\dashboard\document.aspx.cs:123
       System.Web.UI.Control.OnLoad(EventArgs e)
       System.Web.UI.Control.LoadRecursive()
       System.Web.UI.Page.ProcessRequestMain()
    Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407
    I searched forum and google for this error, but I didn't find anything. Did you heard of this error? How can I fix it?
    My BO Version is BusinessObjects Enterprise XI (without any ServicePacks). Is there a SP which fix this error?
    Thank you for every idea!!!

    Hi,
    Copy File from Client system to server in same folder location .
    Make sure in Edit Query option Editable & Refreshable options are checked .
    Please check the links below  .
    Webi Excel Personal Data Provider Dynamic Data
    How to create a webi report using excel as source
    Excel as datasource in Infoview
    Excel source located in Infoview

  • How to handle comma in DMEE when your file format is CSV

    Does anyone knows how DMEE handles comma when its part of the field value and when the file format requirement is CSV?
    Thanks all in advance.
    Aloy

    Wrong forum.
    You should be here.
    Oracle Application Express (APEX)

  • Get AccessControlException(access denied) when refresh page

    Our applet have AccessControlException when refresh the ie browser but the first time open no such a problem! And when we use other host which use a different proxy no such a problem either. Don't know why , is it the problem of proxy?
    any idea ? many thanks!
    here is the log:
    INFO - Wed Jan 16 16:09:30 EST 2008: getResponseTime Debug1-- openConnection time: 0ms
    network: Connecting https://hostname/_en.html with proxy=HTTP @ proxyname:8080
    network: Connecting https://hostname/_en.html with cookie "BCSI-CSA1021104=2"
    INFO - Wed Jan 16 16:09:34 EST 2008: getResponseTime Debug3-- getInputStream time: 4500ms
    liveconnect: Invoking JS method: ua
    INFO - Wed Jan 16 16:09:34 EST 2008: Log page URL -- https://hostname/result.html?timestamp=Wed Jan 16 16:09:34 EST 2008&ip=''&jvm=Sun Microsystems Inc.,1.5.0_14&os=Windows XP,5.1&echo_time=4500ms&UserAgent=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    INFO - Wed Jan 16 16:09:34 EST 2008: logUsrInfo Debug5-- openConnection time: 0ms
    INFO - Wed Jan 16 16:09:34 EST 2008: JVM version checking passed!
    +(the first time open page can pass!)+
    liveconnect: Invoking JS method: showApplication
    basic: Stopping applet ...
    basic: Finding information ...
    basic: Releasing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=0
    basic: Caching classloader: sun.plugin.ClassLoaderInfo@134e4fb
    basic: Current classloader cache size: 1
    basic: Done ...
    basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@1be0f0a
    basic: Joining applet thread ...
    basic: Destroying applet ...
    basic: Disposing applet ...
    basic: Joined applet thread ...
    basic: Unregistered modality listener
    basic: Quiting applet ...
    basic: Registered modality listener
    liveconnect: Invoking JS method: document
    liveconnect: Invoking JS method: URL
    basic: Referencing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=1
    basic: Added progress listener: sun.plugin.util.GrayBoxPainter@50988
    basic: Loading applet ...
    basic: Initializing applet ...
    basic: Starting applet ...
    basic: Referencing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=2
    basic: Releasing classloader: sun.plugin.ClassLoaderInfo@134e4fb, refcount=1
    INFO - Wed Jan 16 16:09:44 EST 2008: getResponseTime Debug1-- openConnection time: 0ms
    network: Connecting https://hostname/fx-canada/login_detail_fr-ca.html with proxy=HTTP @ proxyname/
    network: Server https://hostname/fx-canada/login_detail_fr-ca.html requesting to set-cookie with "BCSI-CSA1021104=2; Path=/"
    INFO - Wed Jan 16 16:09:48 EST 2008: getResponseTime Debug4-- throw exception time: 4515ms
    WARN - Wed Jan 16 16:09:48 EST 2008: Cannot get system response time!
    java.security.AccessControlException: access denied (java.net.SocketPermission hostname:8080 connect,resolve)
    at java.security.AccessControlContext.checkPermission(Unknown Source)
    at java.security.AccessController.checkPermission(Unknown Source)
    at java.lang.SecurityManager.checkPermission(Unknown Source)
    at java.lang.SecurityManager.checkConnect(Unknown Source)
    at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.proxiedConnect(Unknown Source)

    The security credentials for a JMS "send" operation are not taken from the username and password that you pass to the "createConnection" method, but from the security login context in effect when you call "send". So, if you want this to happen using a particular security context, you need to make sure that you have set this up before you make the call.
              There are a number of ways to do this in WLS. Your best bet would be to check the security documentation, or do ask on the security newsgroup for the best way to do this in 8.1.

  • Which BO-account is used when refreshing a metric?

    Hello,
    I have made a metric with BO-application dashboard manager. The metric is stored in table ci_probe and when I execute the stored excutable sql I get data back.
    Now I want to load the data in the performance management database when refreshing a metric.
    I don't get any data in the tabel ci_probe_value.
    I made a trace with SQL-profiler to see if my account reaches the database. It doesn't.
    I have changed the DBUSER field for my account and the Administrator and the PMUser account. They all have the same value and this account has sysadm rights on the database.
    It didn't help.
    When I refresh a metric which account is used the read the data from the database.
    Please advise,
    Thanks
    Joek Poort

    Hi Joek,
    PMUser is used mainly for the DM & PM system to access resources.
    When it comes to data, the connection used in the universe is used to access the database. If you can create a webi report using your universe in question you should be able to see if you get back data or not.
    I think your problem could also maybe be with the definition of the metric in the universe. Test it by simply just droping the metric into webi and check the SQL that is generated.
    Check the BEGIN_DATE and END_DATE of the @prompt (or sometimes BEGIN_DT and END_DT) syntax.
    Regards
    Jacques

  • Ora-04045 when refreshing materialized view

    Can any one help with this error ora-04045 .I get this error when refreshing the materialized view for the first.second time when i refresh the materialized view it gets refreshed.
    My database version is 8.1.7.x

    Yes it is enabled.if you refresh for the 1 time it show object invalid when you refresh again it refreshes and object is valid.i am using dbms_refresh pacakge to do this.one more problem is that i have made a procedure in which i am calling dbms_refresh pakcage 8 times to refresh 8 views.if 1 gets refreshed then 2 will not it will fail.i don't understand this behaviour

Maybe you are looking for