Workcenter based on Production Order and Operation
Dear All,
I want to fetch the data based on the following :
1. For a given Production Order ( This PO will have multiple Operations)
2. I need to know the Work Center
3. for which the respective Operation has the status as "Not Confirmed".
or Let me put in this way :
I need the Workcenter for a particular Purchase order whose operations are not confirmed .
How to fetch the above ?
Regards,
Deepu.K
Hi,
Status check :
call function 'STATUS_CHECK_MULTI'
exporting
bypass_buffer = 'X'
client = sy-mandt
status = 'I0009' <--- here i0009 is the id for produced orders
flg_exclude = space check for unconfirmed orders status here
tables
objects = itab_objnr.
Workcenter from production order :
clear w_aufpl.
select aufpl from afko into w_aufpl where aufnr = itab_afpo-aufnr.
endselect.
clear afvc.
select * from afvc where aufpl = w_aufpl and
steus = 'PP03'.
endselect.
clear crhd.
select * from crhd where objid = afvc-arbid.
exit.
endselect.
if crhd-arbpl = space.
itab_afpo-arbpl = 'OTHER'.
else.
itab_afpo-arbpl = crhd-arbpl.
endif.
Regards,
Vind
Similar Messages
-
How to attempt production orders and get feedback by using IDocs
Hi,
I'm new new to SAP and R3 respectively mySAP. I need to know how to use IDocs (over file system) to attempt production orders to an extern application and how to get the feedback of the whole orders and single operations.
I found the IDoc-base-type "PPCC2RECORDER01" to send production orders. Is that the right base type for production orders?
(In consideration of compatibility and support me was recommend to avoid the old types OPERA2 and CONF21.)
What IDoc-types do I need to get feedback about a production order and its operations?
I hope someone is understanding my questions is able to help me. Please apologize my broken English.
Thanks!
HannesPROGRAM....... ZRCCLORDPROC
TITLE......... Production Odrer Idocs
AUTHOR........ Aveek Ghose
DATE WRITTEN.. 15/09/2006
R/3 RELEASE... 4.6C
=====================================================================*
COPIED FROM... N/A
DESCRIPTION...
*& Creation of production order IDOCs to a given selection
*& This program selects to an input given via the selection screen the *
*& corresponding production orders from the database. Then the function
*& module for creation of planned order idocs is called. *
*& In general this report is called from the report RCCLTRAN, but it *
*& can also be used for its own. *
=====================================================================*
PROGRAM TYPE.. Outbound Interface
DEV. CLASS.... ZPD1
LOGICAL DB.... N/A
=====================================================================*
SCREENS....... N/A
GUI TITLE..... N/A
GUI STATUS.... N/A
TRANSACTIONS.. N/A
USER EXITS.... N/A
=====================================================================*
CHANGE HISTORY *
Date By Correction Number & Brief Description Release
Tables / Structures
REPORT zrcclordproc
NO STANDARD PAGE HEADING
MESSAGE-ID ZCUST
LINE-COUNT 65(0)
LINE-SIZE 255.
INCLUDE RCORDO01. " PBO-Modules *
INCLUDE RCORDI01. " PAI-Modules *
INCLUDE RCORDF01. " FORM-Routines *
--> Global data
TYPE-POOLS: cloi.
include zprodata. "Types / constants for Orderselection
include zrcordtop. "Tables / Data for this report
include zrcordtop1.
include yrccl_constants.
TABLES : jcds,
tvarv,
zzzz_xref_data.
TYPES: BEGIN OF ty_date,
aufnr TYPE aufnr,
aedat TYPE aufaedat,
aezeit TYPE co_chg_time,
erdat TYPE auferfdat,
erfzeit TYPE co_ins_time,
loekz TYPE aufloekz,
indicator(1) TYPE c,
END OF ty_date.
DATA: is_enhancement type isu_ord_segments_determine.
DATA: itab_date TYPE STANDARD TABLE OF ty_date
INITIAL SIZE 0 WITH HEADER LINE.
DATA: f_objnr TYPE j_objnr.
DATA: g_report_sub_head(72) TYPE c, "Sub-Header hold area
g_report_head(72) TYPE c, "Header hold area
g_run_date(72) TYPE c, "Holds message for Run date
g_run_time(72) TYPE c. "Holds message for Run time
DATA:
f_old_date TYPE datum,
f_old_time TYPE uzeit,
f_continue(1) TYPE c.
END OF INSERTION DS001
--> Überschrift für sonstige Einstellungen
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK miscellaneous WITH FRAME.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(30) text-001. "#EC
SELECTION-SCREEN SKIP 1.
*>> Logical system comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-002.
SELECTION-SCREEN POSITION 35.
PARAMETERS opt_sys LIKE tbdlst-logsys.
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-003.
SELECTION-SCREEN POSITION 35.
PARAMETERS mestyp LIKE tbdme-mestyp.
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-004.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_date TYPE sydatum. "last run date
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-005.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_time TYPE syuzeit. "last run time
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK MISCELLANEOUS.
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-006.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_update AS CHECKBOX DEFAULT space.
SELECTION-SCREEN END OF LINE.
*MOD-006
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-007.
SELECTION-SCREEN POSITION 32.
SELECT-OPTIONS: s_rundt FOR sy-datum NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
*MOD-006
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-008.
SELECTION-SCREEN POSITION 32.
SELECT-OPTIONS: s_runtm FOR sy-uzeit NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
*MOD-006
**MOD-006
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 3(30) text-009.
*SELECTION-SCREEN POSITION 32.
*SELECT-OPTIONS: s_emat FOR zzzz_xref_data-z_in_value.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK miscellaneous.
**MOD-006
Write selected AUFPL numbers via ranges table to memory ?
PARAMETERS:
ordtomem TYPE cloi_x DEFAULT '' NO-DISPLAY. "X: yes
do not select from MARC, but use ranges tables directly. MK 4.0C
matnr_gl and werks_gl must have the same length.
PARAMETERS: no_sel TYPE c DEFAULT ' ' NO-DISPLAY.
--> Normal selection parameters for ORD comes from the logical db
*& Event START-OF-SELECTION
START-OF-SELECTION.
--> Select the ORD according to the selected
MRP controller, Material, work center and plant
*MOD-006
Validate the last run date & Time
PERFORM validate_last_run_date_time.
*MOD-006
BEGIN OF INSERTION DS001
get the entry of the last program run
select single * for update from ycloidownlprot
where logsys = OPT_SYS and
downloadtype eq C_DOWNL_PROCESS_ORDERS.
if YCLOIDOWNLPROT-IN_PROGRESS eq CLOI_TRUE.
program is already running, do not allow to start again
write : / text-004, YCLOIDOWNLPROT-USERNAME.
exit.
endif.
YCLOIDOWNLPROT-MANDT = SY-MANDT.
YCLOIDOWNLPROT-LOGSYS = OPT_SYS.
YCLOIDOWNLPROT-START_DATE = SY-DATUM.
YCLOIDOWNLPROT-START_TIME = SY-UZEIT.
YCLOIDOWNLPROT-USERNAME = SY-UNAME.
YCLOIDOWNLPROT-DOWNLOADTYPE = C_DOWNL_PROCESS_ORDERS.
YCLOIDOWNLPROT-IN_PROGRESS = CLOI_TRUE.
insert or update entry (dependant if entry already exists)
MODIFY YCLOIDOWNLPROT.
COMMIT WORK.
CLEAR CREATED_MASTERIDOCS_PRO.
EXPORT CREATED_MASTERIDOCS_PRO TO MEMORY ID 'YLOI001'.
END OF INSERTION DS001
BEGIN OF INSERTION DS001
if not sscrfields-ucomm = 'ONLI'. mk zu 4.0
exit.
endif.
if s_dispo is initial and
s_matnr is initial and
s_arbpl is initial and
s_werks is initial.
exit.
endif.
Send only orders with type 40 - process orders
p_autyp = '40'.
END OF INSERTION DS001
*>> Put the ranges tabs back into matwrk list if no selection (NO_SEL)
IF no_sel = cloi_true.
CLEAR t_matwrk_key. REFRESH t_matwrk_key.
LOOP AT s_matnr.
t_matwrk_key-matnr = s_matnr-low.
READ TABLE s_werks INDEX sy-tabix.
t_matwrk_key-werks = s_werks-low.
APPEND t_matwrk_key.
ENDLOOP.
SORT t_matwrk_key BY matnr werks.
DELETE ADJACENT DUPLICATES FROM t_matwrk_key.
delete duplicate duplicates from ranges table. Therfore sort by LOW
(HIGH is not used in this case).
SORT s_matnr BY low.
DELETE ADJACENT DUPLICATES FROM s_matnr.
SORT s_werks BY low.
DELETE ADJACENT DUPLICATES FROM s_werks.
ENDIF.
--> Determine which segments are selected in the message type
PERFORM ord_segments_determine
USING mestyp
CHANGING afpo_x
jstk_x
afab_x
affl_x
afvo_x
kbed_x
jstv_x
resb_x
kbeu_x
afuv_x
is_enhancement
jstu_x.
Export the flags to the memory, because the following subroutine
must not have any parameters !!!
EXPORT affl_x
afvo_x
kbed_x
resb_x
kbeu_x
afuv_x
TO MEMORY ID 'LOI03'.
MK 19980326 enhanced selections on header/operation level
get selection profile for log system from customizing if available
SELECT SINGLE * FROM tcloi9 WHERE logsys = opt_sys.
if entry exists for the logical system
IF sy-subrc = 0.
if an selection profile for the order is entered, use it for selection
IF NOT tcloi9-ord_selid IS INITIAL.
p_selid = tcloi9-ord_selid.
ENDIF.
IF NOT tcloi9-ord_opr_selid IS INITIAL AND
NOT afvo_x IS INITIAL AND NOT affl_x IS INITIAL.
ord_opr_selid = tcloi9-ord_opr_selid.
ENDIF.
ENDIF.
initialize control key table for selections
CALL FUNCTION 'CLOI_STEUS_GET'
EXPORTING
logsys_to_init = opt_sys
IMPORTING
no_entry_for_logsys = no_entry_for_logsys
TABLES
t_steus = t_steus
EXCEPTIONS
logsys_not_initialized = 1
OTHERS = 2.
Write structure information into the memory
perform fill_memory_selobj.
-> import table with already sent orders
IMPORT gt_aufnrdone FROM MEMORY ID 'LOIAUFNRTAB'. "N599845
SORT gt_aufnrdone BY low. "N599845
--> Read header information
GET ioheader.
Check if material/plant combination is selected MK 4.0C
CLEAR check_flg.
IF no_sel = cloi_true.
READ TABLE t_matwrk_key
WITH KEY matnr = ioheader-matnr
werks = ioheader-werks BINARY SEARCH.
IF sy-subrc <> 0.
check_flg = cloi_true.
ENDIF.
ENDIF.
-> check if order was already sent
IF NOT gt_aufnrdone[] IS INITIAL. "N599845
READ TABLE gt_aufnrdone WITH KEY "N599845
low = ioheader-aufnr "N599845
TRANSPORTING NO FIELDS "N599845
BINARY SEARCH. "N599845
IF sy-subrc = 0. "N599845
-> order already sent
check_flg = cloi_true. "N599845
ENDIF. "N599845
ENDIF. "N599845
leave GET routine if check_flg is set.
CHECK check_flg IS INITIAL.
CLEAR t_afpo. REFRESH t_afpo.
CLEAR t_affl. REFRESH t_affl.
MOVE-CORRESPONDING ioheader TO t_afko.
GET ioheader LATE.
BEGIN OF INSERTION DS001
Check whether the process order has been changed since the last
run of the program
clear f_continue.
if the CHANGED date is greater than the last run or initial
IF IOHEADER-AEDAT GT F_OLD_DATE OR
( ioheader-aedat is initial and
ioheader-aezeit is initial ).
if the CHANGED date is initial check the creation date
if ioheader-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF IOHEADER-ERDAT GT F_OLD_DATE OR
( IOHEADER-ERDAT EQ F_OLD_DATE AND
IOHEADER-ERFZEIT GE F_OLD_TIME ).
f_continue = 'X'.
endif.
else.
f_continue = 'X'.
endif.
if the CHANGED dat is not initial check it against the last run
ELSEIF IOHEADER-AEDAT EQ F_OLD_DATE AND
IOHEADER-AEZEIT GE F_OLD_TIME.
f_continue ='X'.
endif.
Aenderung 295/99 Selektions-Aenderung vom 26. August 99
Wenn Auftrag bereits techn. abgeschlossen ist, so darf kein IDOC
erzeugt werden, wenn Auftrag zum löschen vorgemerkt wird.
CONCATENATE 'OR' IOHEADER-AUFNR INTO F_OBJNR.
SELECT SINGLE * FROM JEST
WHERE OBJNR = F_OBJNR
AND STAT = 'I0045'.
IF JEST-INACT EQ SPACE AND SY-SUBRC EQ 0.
SELECT * FROM JCDS WHERE OBJNR EQ F_OBJNR AND
STAT EQ 'I0045' AND
INACT EQ SPACE.
letzte Aenderung des Status TABG wird geprueft Beg. WA 354/99
ENDSELECT.
IF ( F_OLD_DATE GT JCDS-UDATE OR " Beg JB_02
( F_OLD_DATE EQ JCDS-UDATE AND
F_OLD_TIME GT JCDS-UTIME ) ) AND " End JB_02
SY-SUBRC EQ 0.
CLEAR F_CONTINUE.
ENDIF.
ENDIF.
Ende 295/99
check f_continue eq 'X'.
END OF INSERTION DS001
t_afko-t_afpo = t_afpo[].
t_afko-t_jstk = t_jstk[].
t_afko-t_affl = t_affl[].
t_afko-t_afab = t_afab[].
APPEND t_afko.
IF jstk_x = cloi_x.
t_objnr-objnr = ioheader-objnr.
APPEND t_objnr.
ENDIF.
*---> Remember the orders that are already selected for the global
selection parameters
IF ordtomem = cloi_x. "write order numbers to memory
t_aufnr_range_done-sign = 'I'.
t_aufnr_range_done-option = 'NE'.
t_aufnr_range_done-low = ioheader-aufpl.
APPEND t_aufnr_range_done.
ENDIF.
*---> Remember the orders internal/external keys for AFAB (relationship)
IF afab_x = cloi_x.
MOVE-CORRESPONDING ioheader TO t_aufpl_aufnr.
APPEND t_aufpl_aufnr.
ENDIF.
check afpo_x = cloi_x.
GET ioitem.
BEGIN OF INSERTION DS001
Check whether the process order has been changed since the last
run of the program
CLEAR F_CONTINUE.
if the CHANGED date is greater than the last run or initial
IF IOHEADER-AEDAT GT F_OLD_DATE OR
( ioheader-aedat is initial and
ioheader-aezeit is initial ).
if the CHANGED date is initial check the creation date
if ioheader-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF IOHEADER-ERDAT GT F_OLD_DATE OR
( IOHEADER-ERDAT EQ F_OLD_DATE AND
IOHEADER-ERFZEIT GE F_OLD_TIME ).
f_continue = 'X'.
endif.
else.
f_continue = 'X'.
endif.
if the CHANGED date is not initial check it against the last run
ELSEIF IOHEADER-AEDAT EQ F_OLD_DATE AND
IOHEADER-AEZEIT GE F_OLD_TIME.
f_continue ='X'.
endif.
Aenderung 295/99 Selektions-Aenderung vom 26. August 99
Wenn Auftrag bereits techn. abgeschlossen ist, so darf kein IDOC
erzeugt werden, wenn Auftrag zum löschen vorgemerkt wird.
CONCATENATE 'OR' IOHEADER-AUFNR INTO F_OBJNR.
SELECT SINGLE * FROM JEST
WHERE OBJNR = F_OBJNR
AND STAT = 'I0045'.
IF JEST-INACT EQ SPACE AND SY-SUBRC EQ 0.
SELECT * FROM JCDS WHERE OBJNR EQ F_OBJNR AND
STAT EQ 'I0045' AND
INACT EQ SPACE.
letzte Aenderung des Status TABG wird geprueft
ENDSELECT.
IF ( F_OLD_DATE GT JCDS-UDATE OR " Beg JB_02
( F_OLD_DATE EQ JCDS-UDATE AND
F_OLD_TIME GT JCDS-UTIME ) ) AND " End JB_02
SY-SUBRC EQ 0.
CLEAR F_CONTINUE.
ENDIF.
ENDIF.
Ende 295/99
check f_continue eq 'X'.
END OF INSERTION DS001
IF afpo_x = cloi_x.
MOVE-CORRESPONDING ioitem TO t_afpo.
APPEND t_afpo.
ENDIF.
Put matnr and ltrmi in a help structure, which later goes to t_afpo
IF ioitem-posnr = '0001'.
MOVE-CORRESPONDING ioitem TO help_afpo.
APPEND help_afpo.
put PSP element (internal key) into order header. Unique for positions
IF t_afko-pspel IS INITIAL.
t_afko-pspel = ioitem-projn.
ENDIF.
ENDIF.
CHECK affl_x = cloi_x.
GET iosequen.
CLEAR t_afvo. REFRESH t_afvo.
MOVE-CORRESPONDING iosequen TO t_affl.
GET iosequen LATE.
t_affl-t_afvo = t_afvo[].
APPEND t_affl.
CHECK afvo_x = cloi_x.
GET iooper.
CLEAR t_kbed. REFRESH t_kbed.
CLEAR t_afuv. REFRESH t_afuv.
CLEAR t_resb. REFRESH t_resb.
MOVE-CORRESPONDING iooper TO t_afvo.
"Temporary storing of operation information if for a phase
"the corresponding operation has is needed
MOVE-CORRESPONDING iooper TO t_aufpl_aplzl_vornr.
APPEND t_aufpl_aplzl_vornr.
check, if selection profile (if exists) for the operation is ok
IF NOT ord_opr_selid IS INITIAL.
CALL FUNCTION 'STATUS_CHECK_BY_SELSCHEM'
EXPORTING
objnr = iooper-objnr
selid = ord_opr_selid
IMPORTING
fullfill = status_ok
EXCEPTIONS
no_stat_tab = 1
no_stat_scheme = 2
OTHERS = 3.
IF sy-subrc <> 0.
status_ok = cloi_x.
ENDIF.
ELSE.
status_ok = cloi_x.
ENDIF.
check if control key (STEUS) should not be selected.
control_key_ok = cloi_x.
IF no_entry_for_logsys IS INITIAL.
READ TABLE t_steus WITH KEY
steus = iooper-steus BINARY SEARCH.
IF sy-subrc <> 0.
CLEAR control_key_ok.
ENDIF.
ENDIF.
CHECK NOT status_ok IS INITIAL.
CHECK NOT control_key_ok IS INITIAL.
GET iooper LATE.
t_afvo-t_kbed = t_kbed[].
t_afvo-t_afuv = t_afuv[].
t_afvo-t_resb = t_resb[].
APPEND t_afvo.
IF jstv_x = cloi_x.
t_objnr-objnr = iooper-objnr.
APPEND t_objnr.
ENDIF.
CHECK kbed_x = cloi_x.
GET ioopcap.
MOVE-CORRESPONDING ioopcap TO t_kbed.
APPEND t_kbed.
CHECK resb_x = cloi_x.
GET ioopcomp.
do not transfer RESB entries with deletion flag
CHECK ioopcomp-xloek IS INITIAL.
MOVE-CORRESPONDING ioopcomp TO t_resb.
APPEND t_resb.
CHECK afuv_x = cloi_x.
GET iosoper.
CLEAR t_kbeu. REFRESH t_kbeu.
MOVE-CORRESPONDING iosoper TO t_afuv.
check if control key (STEUS) should not be selected.
control_key_ok = cloi_x.
IF no_entry_for_logsys IS INITIAL.
READ TABLE t_steus WITH KEY
steus = iooper-steus BINARY SEARCH.
IF sy-subrc <> 0.
CLEAR control_key_ok.
ENDIF.
ENDIF.
CHECK NOT control_key_ok IS INITIAL.
GET iosoper LATE.
t_afuv-t_kbeu = t_kbeu[].
APPEND t_afuv.
IF jstv_x = cloi_x.
t_objnr-objnr = iosoper-objnr.
APPEND t_objnr.
ENDIF.
CHECK kbeu_x = cloi_x.
GET iosocap.
MOVE-CORRESPONDING iosocap TO t_kbeu.
APPEND t_kbeu.
*& Event END-OF-SELECTION
END-OF-SELECTION.
*MOD-006
DATA: itab_matnr TYPE zzzz_xref_data OCCURS 0.
DATA: l_wa_matnr TYPE zzzz_xref_data.
DATA: l_wa_matnr_value TYPE zzzz_xref_data-z_in_value.
DATA: l_wa_afko TYPE cloi_afko_struct.
SELECT *
FROM zzzz_xref_data
APPENDING TABLE itab_matnr
WHERE trans_id = 'ZELCUSMATLOOKUP' AND
( z_in_value IN s_matnr OR
z_out_value IN s_matnr ).
IF sy-subrc = 0.
LOOP AT ITAB_MATNR INTO L_WA_MATNR.
L_WA_MATNR_VALUE = L_WA_MATNR-z_OUT_VALUE.
S_MATNR-LOW = L_WA_MATNR_VALUE.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
APPEND S_MATNR.
ENDLOOP.
DELETE itab_matnr WHERE NOT in_value IN s_emat.
SORT itab_matnr BY out_value.
ENDIF.
CLEAR: l_wa_matnr.
**MOD-010
Data which is not in the material lookup table but in the T_AFKO.
LOOP AT t_afko INTO l_wa_afko.
READ TABLE S_MATNR WITH KEY LOW = L_WA_AFKO-MATNR BINARY SEARCH.
READ TABLE itab_matnr INTO l_wa_matnr
WITH KEY z_out_value = l_wa_afko-matnr BINARY SEARCH.
IF sy-subrc NE 0.
l_wa_afko-rgekz = 'X'.
MODIFY t_afko FROM l_wa_afko TRANSPORTING rgekz.
ENDIF.
IF NOT P_DATE IS INITIAL.
IF T_AFKO-GSTRP < p_date OR
( T_AFKO-GSTRP = p_date AND
T_AFKO-GSUZP > p_time ).
L_WA_AFKO-RGEKZ = 'X'.
MODIFY T_AFKO FROM L_WA_AFKO TRANSPORTING RGEKZ.
ENDIF.
ENDIF.
ENDLOOP.
Delete Data which is not in the material lookup
table but in the T_AFKO.
DELETE t_afko WHERE rgekz = 'X'.
*MOD-010
*MOD-006
BEGIN OF INSERTION DS001
DATA: l_wa_itab_date TYPE ty_date.
Check whether the process order has been changed since the last
run of the program
CLEAR f_continue.
IF NOT t_afko IS INITIAL.
SELECT aufnr aedat aezeit erdat erfzeit loekz
INTO TABLE itab_date
FROM aufk
FOR ALL ENTRIES IN t_afko
WHERE aufnr = t_afko-aufnr.
IF sy-subrc = 0.
IF NOT p_date IS INITIAL.
CLEAR: itab_date.
Check whether the process order has been changed since the last
run of the program
LOOP AT itab_date INTO l_wa_itab_date.
if the CHANGED date is greater than the last run or initial
IF l_wa_itab_date-aedat GT p_date OR
( l_wa_itab_date-aedat IS INITIAL AND
l_wa_itab_date-aezeit IS INITIAL ).
if the CHANGED date is initial check the creation date
IF l_wa_itab_date-aedat IS INITIAL.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF l_wa_itab_date-erdat GT p_date OR
( l_wa_itab_date-erdat EQ p_date AND
l_wa_itab_date-erfzeit GE p_time ).
f_continue = 'X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date TRANSPORTING indicator.
ENDIF.
ELSE.
f_continue = 'X'.
ENDIF.
if the CHANGED dat is not initial check it against the last run
ELSEIF l_wa_itab_date-aedat EQ p_date AND
l_wa_itab_date-aezeit GE p_time.
f_continue ='X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date TRANSPORTING indicator.
ENDIF.
ENDLOOP.
*MOD-006
ELSE.
CLEAR: ITAB_DATE.
LOOP AT ITAB_DATE INTO L_WA_ITAB_DATE.
if the CHANGED date is greater than the last run or initial
IF L_WA_ITAB_DATE-AEDAT GT P_RUNDT OR
( L_WA_ITAB_DATE-aedat is initial and
L_WA_ITAB_DATE-aezeit is initial ).
if the CHANGED date is initial check the creation date
if l_wa_itab_date-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF L_WA_ITAB_DATE-ERDAT GT P_RUNDT OR
( L_WA_ITAB_DATE-ERDAT EQ P_RUNDT AND
L_WA_ITAB_DATE-ERFZEIT GE S_RUNTM-LOW OR
L_WA_ITAB_DATE-ERFZEIT LE S_RUNTM-HIGH ).
f_continue = 'X'.
else.
l_wa_itab_date-indicator = 'X'.
MODIFY ITAB_DATE FROM L_WA_ITAB_DATE
TRANSPORTING INDICATOR.
endif.
else.
f_continue = 'X'.
endif.
if the CHANGED dat is not initial check it against the last run
ELSEIF L_WA_ITAB_DATE-AEDAT EQ P_RUNDT AND
L_WA_ITAB_DATE-AEZEIT GE S_RUNTM-LOW.
f_continue ='X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY ITAB_DATE FROM L_WA_ITAB_DATE
TRANSPORTING INDICATOR.
endif.
ENDLOOP.
*MOD-006
ENDIF.
ENDIF.
ENDIF.
DELETE ITAB_DATE WHERE INDICATOR = 'X'.
*MOD-006
CLEAR: itab_date.
IF s_rundt-high IS INITIAL AND NOT s_rundt IS INITIAL.
s_rundt-high = sy-datum.
ENDIF.
LOOP AT itab_date INTO l_wa_itab_date.
IF NOT s_rundt IS INITIAL.
if the CHANGED date is greater than the last run or initial
IF ( l_wa_itab_date-aedat IS INITIAL AND
l_wa_itab_date-aezeit IS INITIAL ).
if the CHANGED date is initial check the creation date
IF l_wa_itab_date-aedat IS INITIAL.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF ( l_wa_itab_date-erdat GT s_rundt-low AND
l_wa_itab_date-erfzeit GT s_runtm-low ) AND
( l_wa_itab_date-erdat LT s_rundt-high AND
l_wa_itab_date-erfzeit LT s_runtm-high ).
f_continue = 'X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date
TRANSPORTING indicator.
ENDIF.
ELSE.
f_continue = 'X'.
ENDIF.
if the CHANGED dat is not initial check it against the last run
ELSEIF ( l_wa_itab_date-aedat GE s_rundt-low AND
l_wa_itab_date-aezeit GE s_runtm-low ) AND
( l_wa_itab_date-aedat LE s_rundt-high AND
l_wa_itab_date-aezeit LE s_runtm-high ).
f_continue ='X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date
TRANSPORTING indicator.
ENDIF.
ENDIF.
ENDLOOP.
DELETE itab_date WHERE indicator = 'X'.
*MOD-006
**MOD-006
LOOP AT t_afko INTO l_wa_afko.
READ TABLE itab_date INTO l_wa_itab_date
WITH KEY aufnr = l_wa_afko-aufnr BINARY SEARCH.
IF sy-subrc NE 0.
l_wa_afko-rgekz = 'X'.
MODIFY t_afko FROM l_wa_afko TRANSPORTING rgekz.
ENDIF.
ENDLOOP.
DELETE t_afko WHERE rgekz = 'X'.
**MOD-006
-> initialize logical data base to reduce memory consumption
PERFORM ldb_process_init(sapdbioc)
CHANGING
lv_subrc.
--> add information to the order structure that is not
selected via logical database:
- if AFVO-entry is a phase (phflg) --> fill field for
corresponding operation number (PVZNR)
The internal node number (aplzl) of the corresponding operation
is in field PVZKN of the phase
- relationship information: E1AFABL
especially: select external numbers for the used
internal numbers in the table AFAB
- status information of the order header: E1JSTKL
- status information of the operation: E1JSTVL
--> Put matnr and ltrmi in the table t_afko
SORT t_afko BY aufnr.
LOOP AT help_afpo.
READ TABLE t_afko WITH KEY aufnr = help_afpo-aufnr
ASSIGNING -gltri = help_afpo-ltrmi.
ENDIF.
ENDLOOP.
--> Select entries for order and operation status
IF NOT t_objnr[] IS INITIAL.
SELECT objnr stat FROM jest INTO TABLE t_jest2
FOR ALL ENTRIES IN t_objnr
WHERE objnr = t_objnr-objnr
AND inact <> 'X'.
ENDIF.
--> Select entries for relationships from afab for all orders
into table t_afab_tmp
SORT t_aufpl_aplzl_vornr BY aufpl aplzl.
IF afab_x = cloi_x AND NOT t_aufpl_aufnr[] IS INITIAL.
-> select afab data
SELECT * FROM afab INTO TABLE t_afab_tmp
FOR ALL ENTRIES IN t_aufpl_aufnr
WHERE aufpl_vor = t_aufpl_aufnr-aufpl.
SELECT * FROM afab APPENDING TABLE t_afab_tmp
FOR ALL ENTRIES IN t_aufpl_aufnr
WHERE aufpl_nch = t_aufpl_aufnr-aufpl.
SORT t_afab_tmp
BY aufpl_vor aplzl_vor aufpl_nch aplzl_nch aobar mimax.
DELETE ADJACENT DUPLICATES FROM t_afab_tmp
COMPARING aufpl_vor aplzl_vor aufpl_nch aplzl_nch aobar mimax.
-> read external order numbers out of data base
CLEAR t_aufpl. REFRESH t_aufpl.
LOOP AT t_afab_tmp ASSIGNING -aufpl_nch.
COLLECT t_aufpl.
ENDLOOP.
CLEAR t_aufpl_aufnr. REFRESH t_aufpl_aufnr.
IF NOT t_aufpl[] IS INITIAL.
SELECT aufpl aufnr FROM afko INTO TABLE t_aufpl_aufnr
FOR ALL ENTRIES IN t_aufpl
WHERE aufpl = t_aufpl-aufpl.
SORT t_aufpl_aufnr BY aufpl.
ENDIF.
-> add order numbers to afab data
LOOP AT t_afab_tmp ASSIGNING -aufnr_nch = t_aufpl_aufnr-aufnr.
ENDIF.
ENDLOOP.
-> read operation numbers out of data base
CLEAR t_aufpl_aplzl. REFRESH t_aufpl_aplzl.
LOOP AT t_afab_tmp ASSIGNING -aplzl_nch.
COLLECT t_aufpl_aplzl.
ENDLOOP.
IF NOT t_aufpl_aplzl[] IS INITIAL.
SELECT aufpl aplzl vornr FROM afvc
APPENDING TABLE t_aufpl_aplzl_vornr
FOR ALL ENTRIES IN t_aufpl_aplzl
WHERE aufpl = t_aufpl_aplzl-aufpl
AND aplzl = t_aufpl_aplzl-aplzl.
SORT t_aufpl_aplzl_vornr BY aufpl aplzl.
ENDIF.
-> add operation numbers to afab data
LOOP AT t_afab_tmp ASSIGNING -vornr_nch = t_aufpl_aplzl_vornr-vornr.
ENDIF.
ENDLOOP.
ENDIF. "afab_x
--> fill AFAB (relationship information) and status information
SORT t_aufpl_aufnr BY aufnr.
LOOP AT t_afko ASSIGNING .
-> fill order head status information
IF jstk_x = cloi_x.
CLEAR t_jstk. REFRESH t_jstk.
LOOP AT t_jest2 INTO wa_tjest2 WHERE objnr = -t_jstk = t_jstk[].
ENDIF.
-> fill afab information
IF afab_x = cloi_x.
CLEAR t_aufpl_aufnr.
READ TABLE t_aufpl_aufnr WITH KEY
aufnr = -t_afab = t_afab[].
ENDIF.
-> fill operation and suboperation status information
IF jstv_x = cloi_x OR afvo_x = cloi_x.
LOOP AT .
-> read status information of suboperation
IF jstu_x = cloi_x.
LOOP AT -t_jstu = t_jstu[].
ENDLOOP.
ENDIF.
-> read status information of operation
IF jstv_x = cloi_x.
CLEAR t_jstv. REFRESH t_jstv.
LOOP AT t_jest2 INTO wa_tjest2 WHERE objnr = -t_jstv = t_jstv[].
ENDIF.
-> Read operation for a phase
IF NOT -pvznr = t_aufpl_aplzl_vornr-vornr.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
-> collect order numbers
CLEAR wa_aufnrdone.
wa_aufnrdone-low = -aufnr.
APPEND wa_aufnrdone TO lt_aufnrdone.
ENDLOOP.
-> append collected order numbers to global table
APPEND LINES OF lt_aufnrdone TO gt_aufnrdone.
EXPORT gt_aufnrdone TO MEMORY ID 'LOIAUFNRTAB'.
-> free large tables
CLEAR t_jest2. REFRESH t_jest2.
CLEAR t_afab_tmp. REFRESH t_afab_tmp.
CLEAR t_aufpl. REFRESH t_aufpl.
CLEAR t_aufpl_aufnr. REFRESH t_aufpl_aufnr.
CLEAR t_aufpl_aplzl. REFRESH t_aufpl_aplzl.
CLEAR t_aufpl_aplzl_vornr. REFRESH t_aufpl_aplzl_vornr.
-> create idocs
CALL FUNCTION 'CLOI_MASTERIDOC_CREATE_LOIPRO'
EXPORTING
opt_sys = opt_sys
message_type = mestyp
TABLES
order_data = t_afko
EXCEPTIONS
OTHERS = 1.
-> export already selected order numbers via ranges tab to memory
EXPORT t_aufnr_range_done TO MEMORY ID 'LOI002'.
**MOD-006
IMPORT created_masteridocs_pro FROM MEMORY ID 'YLOI001'.
ycloidownlprot-end_date = sy-datum.
ycloidownlprot-end_time = sy-uzeit.
ycloidownlprot-idocs_selected = created_masteridocs_pro.
ycloidownlprot-in_progress = cloi_false.
insert or update entry (dependant if entry already exists)
MODIFY ycloidownlprot.
COMMIT WORK.
MESSAGE i967(z001) WITH created_masteridocs_pro.
**MOD-006
Update last run date and time
IF p_update = 'X'.
PERFORM update_last_run.
ELSE.
MESSAGE s000 WITH text-022.
"Last Run Date and Last Run Time not updated
LEAVE LIST-PROCESSING.
ENDIF.
INCLUDE rcordf01.
*& Form validate_last_run_date_time
text
--> p1 text
<-- p2 text
*FORM validate_last_run_date_time.
IF p_date IS INITIAL OR
p_time IS INITIAL.
IF sy-batch IS INITIAL.
MESSAGE s000 WITH text-017.
"Last Run date & Last Run Time can not be blank
LEAVE LIST-PROCESSING.
ELSE.
MESSAGE e000 WITH text-017.
"Last Run date & Last Run Time can not be blank
ENDIF.
ENDIF.
*ENDFORM. " validate_last_run_date_time
*& Form update_last_run
text
--> p1 text
<-- p2 text
FORM update_last_run.
CONSTANTS:
l_c_name TYPE rvari_vnam VALUE 'Z_PROC_DATE',
l_c_name1 TYPE rvari_vnam VALUE 'Z_PROC_TIME',
l_c_type TYPE rsscr_kind VALUE 'P',
l_c_numb TYPE tvarv_numb VALUE '0000'.
Update last run date
UPDATE tvarv SET low = sy-datum
WHERE name = l_c_name AND
type = l_c_type AND
numb = l_c_numb.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
g_run_date = text-015. "#EC
"Updation of TVARV table failed for ZLAST_RUN_DATE. Update manually
ENDIF.
Update last run time
UPDATE tvarv SET low = sy-uzeit
WHERE name = l_c_name1 AND
type = l_c_type AND
numb = l_c_numb.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
g_run_time = text-016. "#EC
"Updation of TVARV table failed for ZLAST_RUN_TIME. Update manually
ENDIF.
ENDFORM. " update_last_run -
The relationship between production order and purchase requistion After running MPS
Dear Experts:
I met a issue . My users want to know the relationship between production order and purchase requistion . In my company we create production order and purchase req. by running MRP. our operations are:
1. T-CODE: MD41 create planned order .
2. T-CODE: CO41 convert planned order to production order .
3. T-CODE: MD15 convert planned order to purchase Requisition.
but I can't find the relation of them. would you like to give me some advices? thank you very much.Hello
On the standard MTS process there is no link between the requirement (STO) and the replenishment element (production order).
See the below extraction from note 12955:
There is no index that the system could use to determine which issue element (sales order, planning, reservation, dependent requirement, ...) is covered by a certain receipt element (purchase order, production order, purchase requisition, planned order, stock level ...).
A production order, for example, can be created to cover several different requirements, even when you are using lot sizing procedure EX.
You can use transaction MD09 or MD04to determine the pegged requirements, but they are calculated dynamically and there is not fixed link between requirement and receipt.
BR
Caetano -
BAPI/FM for Confirmation of Production order at operation level
Hi ABAPers,
I am using the 'BAPI_PRODORDCONF_CREATE_ACT'for Confirmation of Production order at operation level.
I am able to pass the Production order number and Active Operation get the confirmation done.
But the Confirmed Qty is not being updating in AFKO table.
The 'BAPI_PRODORDCONF_CREATE_HDR' cannot be used for Confirmation of Production order at operation level as there is no Operation/Activity(Vornr) field in the input table. Hence using this bapi confirmation of Prod order can be only at Order level.
Can someone know any FM/BAPI which can be used for the Confirmation of Production order at operation level(not order level).
Thanks in Advance
Ramesh Babu CikkaHi Ramesh,
Please use FUNCTION 'BAPI_PRODORDCONF_CREATE_TT'.
This will work as like as T/Code "CO11".
I hope this will help you.
Example :
CALL FUNCTION 'BAPI_PRODORDCONF_CREATE_TT'
EXPORTING
POST_WRONG_ENTRIES = '0'
TESTRUN = ' '
IMPORTING
RETURN = ZRETURN
TABLES
TIMETICKETS = ZBAPI_PP_TIMETICKET
DETAIL_RETURN = ZBAPI_CORU_RETURN.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'W'.
Lanka -
Userexit for updating sales order user status based on Production Order
Hi.
My clients requirent is
Sales order user status should get updated based on production order creation,GR for PO creation etc.
Basically depending on PO & GR For PO,various user stauts in sales order should get updated.
Can you please suggest me some userexits in PP for this requirement?
I am a SD Consultant and not having much idaes about PP
Thanks
Nishahi,
if you are not going to update it in the SO..
then you need different exits as those are different transactions. -
BOM Explosion based on Production Order Creation
Hi PP Guru,
My client wants the BOM Explosion date to be based on Production Order creation date. Could you help to advise how to set-up this requirement?
I have showed them these possible System Configuration in BOM explosion, but none of these options are applicable to their current business practice.
<OPPQ> BOM Explosion:
BOM explosion number/order start date
1 Order start date
2 Order finish date
3 BOM explosion number/order start date
4 BOM explosion number/order finish date
Looking forward to you reply.
thanks,
JohnHi Sundaresan,
Thanks for your reply. So do you think there's any other way to fulfill the client's requirement? I was thinking to do the "PP Master Data" instead, in order to choose the date of explosion.
Actually the scenario is this:
Initially the Material XXXXXX has a valid BOM on 03.01.2011 to 12.31.9999, but then, some changes has been made, maybe the user has changed the component or added new component using 04.01.2011 to 12.31.9999 as validity date.
For example, the user created the Production Order (manually in CO01 or from Planned Order conversion) on 03.20.2011 and the Order Star date is 04.01.2011, so the system will copy the updated BOM which is valid on 04.01.2011 to 12.31.9999 (based on Order Start date).
However, the client wants to explode the previous BOM instead (03.01.2011 to 12.31.9999).
Please advise.
Thanks,
John -
IDOC for Creation of Production order and also adding components
Hi ,
I have a requirement like I get the data from a 3rd party system and using that i have to create production orders and also should be able to add more materials in COMPONENTS part of that Production order. I was looking for a BAPI which can handle this process.
And also can any one help me by letting me know is there any Message type available for handling this process of Production order creation and Adding extyra components to it.
I have a message type LOIPRO (for Production Order) and associated function modle CLOI_MASTERIDOC_CREATE_LOIPRO for creation of master IDoc, but not sure can i handle the Components part in this.
Please do send replies ASAP, its very urgent.
Or else atleast suggest me the other ways of doing this .
Also send me any BDC program if anyone has already developed for this.
Thanks
Kumar
Edited by: Phani Kumar Peddagopu on Mar 19, 2008 6:56 PMResolved .
-
Open production orders and outbound delivery after go-live
Hello All,
I tried to search answer for this question but could not find answer.
Could anybody suggest, what to do with open production orders and outbound delivery after go-live when WM is activated. As, after go-live WM-PP interface will be activated and system should consume material from storage bin specified in control cycle and that will happen for newly created production order after go-live,but what about existing production orders how to update production supply area against work center in production order.
Similarly with outbound delivery how to update WM status after go-live.
Thanks in advanceThanks to both Jurgen and Sander
Regarding production order yes, one way is to re-read PP master data in production orders, but is that the only way to handle this or do we have any other option?
I was aware of re-read PP master data but it will real time consuming and also if it will problematic for already released or partially confirmed production orders. -
How to bifurcate production order and purchase order
hi all,
is it possible to bifurcate all open production order and purchase order quantity of items.
ex:i have one item like ffp001 it is showing 100 order quantity.but i want only open purchase quantity.i checked (item master data-->righ click--->Avail to promise) its showing open production and purchase quantity.so i need only open purchase quantity.
Plz tell me the process of Bifurcation of open orders.
thanks&Regards,
P.PratapHi,
By default there is no option , as a workaround you can use below method,
Create 2 warehouse , for example Purchase , Production
When ever you create purchase order use "Purchase" warehouse, Use production warehouse in production
In the "Available to Promise" Report you have warehouse filter option.
Using this filter you achieve can achieve your requirement.
OR
Right click "Filter Table"
Document -> Start with-> PO
Now you can see only PO
Refer below image -
Adding fixed cost in production order and creating liability
Dear All,
We are manufacturing one of our grade of material in a plant which we do not own.We pay some fixed charges to the owner of that plant @ Rs150 PMT produced in that plant.This fixed charges is to be included in the production order and at the same time liability for that fixed charges is also to be created so that payment can be made to that vendor.
For charging this expenses to the production order we have created one activity type and one secondary cost element.But with this the liability can not be created.
Please advice how to proceed in this circumstances.
Regards,
Shivajihi
I am following this thread...but want to add some views on this..
As I understood from your requirement that you are sending this material to a third party for some conversion with a fixed charge...so you must have a conversion contract with that party. In my views the process should be...
1. Conversion contract with the party (MM)
2. Material will be received from third party with conversion cost at the time of GR (MM)
Example... Original cost + fixed conv cost = GR value
3. Invoicing ... MIRO ..Party will be credited at fixed conversion cost
4, When the same material is issued to another prod order the GI will be at cost as per sl.2
Please revert back if you have any question
Kamal -
Refrence number in Production order and purchase requisition
Dear All
This is MTO scenerio where sales order is created with refernce to quotation,
Subsequently in MRP run it creating sales order reservation for quotation number not sales for sales order number
similarly while creating purchase requisition it is displaying refernce number as quotation number
My requirement is instead of quotation number sales order number should display in production order and purchase requisition
All answers r suitably rewarded
regardsHi
Pl check schedule line category you have set for quotation.
In sch. line for quotation remove checkmark for transfer of requirement and remove automatic Pr generation.
This will give required result.
Regards
Mandar -
Production order and its Purchase order after MRP
Dear Expert,
I am wondering does SAP B1 2007 provides functionality about a production order and its purchase orders generated after a MRP will be marked so that I can check the corresponding purchase orders of a production order ?
Thanks,
DeckardHi Suraj V ,
Thanks for the reply, I have more questions about,
(1) is it possible to trace those purchase orders from the production order?
(2) is it possible to reserve those purchase orders of a production order because I found that the system allow another production orders to take the inventory by the receipt of the purchase orders marked by the other production orders?
Thanks a lot
Deckard -
Evaluation Structure for Production Order and Repetitive Manufacturing
Dear PP friends,
I am trying to create a Evaluation Structure with reference to an Evaluation Structure (t-code MCR7). I need to join the Standard Evaluation Structures S021 (Production Order) and S026 (Material Usage), but S021 is not appearing to choose characteristics and key figures.
Does anyone have suggestions?
My requirement is to create a report where I can see goods receipt x goods issues per order.
Thanks in advance.
MarcosHi,
As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
Regards
Chandra -
Sales order number based on Production order number.
Hi,
Can anyone provide me the relationship between the sales order and production order .
I need to get the customer material description(ie from vbap for related sales document no) when i give the input as a production order number ,now my question is how the data is retriewed i mean how the production order gets related to sales order and form it how the material no is picked up and its material description..
Please provide me with the tables and what key fields are related (clear view how tables are related and how could i fetch the data)Swetha,
There is no exact relationship between a Production order and a Sales order in an MakeToStock environment. I will therefore assume that you are speaking of MakeToOrder, where there is an exact relationship between the Production order and the Sales Order/Item.
Functionally, CO03 > enter the production order number. On the display screen will be displayed the associated Sales order and item. Double click on this and it will bring you to VA03. Select the item of interest, and then Goto > Item > Purchase order data. The customer material is displayed. If you have entered a customer material description in your Customer Material Info Record (CMIR) (VD51), and if the Material in the sales order was determined by the customer material info record, then the description will be displayed instead.
So, at table level:
Look in AFPO to find production order number. Contained in AFPO is AFPO-KDAUF and AFPO-KDPOS.
Use these fields to look in VBAP to locate your sales order/item. Find VBAP-KDMAT. This is customer material.
The description of the 'standard' customer materials can always be found in KNMT. To look this up, you need to know sales org, dist channel, customer, and material. Lookup using a program is dicey, since it is possible, within a sales order, to determine the material from Customer material, or it is possible to just enter any customer material in the sales order. When the material is determined, it depends upon your determination logic (sold to? Hierarchy?), which can differ from system to system, and from customer to customer. To sum it up, it is possible to get the CustMat description from data found in VBAP and VBAK, but you first need to know how your CMIRs are structured.
For a simple lookup, I suggest you just get to the customer material in VBAP, and stop there.
For more info about how data is stored in the Sales documents, you might want to ask your question in one of the SD forums.
Best Regards,
DB49 -
Query based on production order,receipt for production and issue for produc
hello sap experts i need a query on
this is my query but iam not getting correct result could anypne help out any relation is wrong in this pls verify it and reply asap .
SELECT T0.[DocNum], T0.[ItemCode], T0.[PlannedQty], T1.[ItemCode], T1.[PlannedQty], T3.[Quantity], T5.[Quantity]
FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry, OIGN T2 INNER JOIN IGN1 T3 ON T2.DocEntry = T3.DocEntry, OIGE T4 INNER JOIN IGE1 T5 ON T4.DocEntry = T5.DocEntry
WHERE T1.[ItemCode] = T3.[ItemCode] and T1.[ItemCode] = T5.[ItemCode] and T0.[PostDate] between [%0] and [%1]
GROUP BY T0.[DocNum], T0.[ItemCode], T0.[PlannedQty], T1.[ItemCode], T1.[PlannedQty], T3.[Quantity], T5.[Quantity]
ORDER BY T0.[DocNum]
regards
JennyHi,
Here is another suggestion.
select t0.docnum,
case
when t0.status = 'P' then 'Planned'
when t0.status = 'R' then 'Released'
when t0.status = 'L' then 'Closed'
when t0.status = 'C' then 'Cancelled'
else t0.status end as 'Production Order Status',
t0.ItemCode as 'Parent Item', t0.PlannedQty as 'Planned Parent Item',
T1.ItemCode as 'Component Item', T1.PlannedQty as 'Planned Component Item',
(select T2.Quantity
from ign1 t2
where t0.itemcode=t2.itemcode and t0.docentry = t2.baseentry) as 'Received End Product',
case
when t1.issuetype = 'B' then 'Backflush'
when t1.issuetype = 'M' then convert(varchar(15), t3.quantity)
end as 'Issued Component Item'
FROM OWOR T0
INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry
left join ige1 t3 on t1.docentry = t3.baseentry and
t1.linenum = t3.baseline
Somehow I get the feeling it would make more sense to have it in 2 separate reports. But if it works for you it's good.
Let us know how it goes and if these are indeed the reports you are looking for.
Jesper
Maybe you are looking for
-
Hello, May be in this forum could I have more chances to get a reponse. My problem is: I've used the Server model guide to retrofit one schema's user. When I try to save the Server Model diagram it fails with: ORA-01036: illegal variable name/number
-
For some reason, iOS 6 has decided to download on my iPod Touch through WiFi. I didn't request it, nothing is set to automatically update in the Touch settings, or iTunes. It seemed to start downloading when I synced the Touch. I've disconnected the
-
HT3964 my macb ook pro will accept disc and then rejects
Help me to find out how to insert discs and play. My Mac book pro accepts and then rejects discs
-
Can I extend my warranty for my iPod
I bought it last year, and the warranty is expire by now, can I still extend my warranty?
-
Hi everybody. My DD crash months ago.. so I had to replaced it. Since that, system texts and texts of apple applications don't look well. The texts lines seem one over other one. Kindly I'm asking if some one know how to fix this disgusting issue?