Workcenter with no of capacity 10

Hi
I have one work center with no of capacity 10
i have cycle time for one operation with say only no of capacity as 1 = 15 sec
do i have to change cycle time also when i am changing no of capacity from 1 to 10
I mean how the calculation would take place , available capacity OR Load
Is it must to use split with this ??
Please help in this regard
Regards
Amit

Hi,
Suppose the production order qty is 10 no. With No. of individual capacity=1, the cycle time is 15 sec for 1 no.So the total processing time is 150 sec (15*10). When the same operation is executed in 10 Capacities, the work is splitted equally to all the 10 capacitites and hence the total processing time will be 15 sec for producing 10no with 10 individual capacities. For this maintain the formula for scheduling as the SAP standard formula SAP002.
Now your available capacity is 10 with the operating time as per the shifts defined. If one capacity works for 8 hrs, then the available time for this work center will be 80 hrs (8*10) with 10 individual capaciities.
For this, maintain no. of individual capacity=10 in Work center capacity header. In routing, maintain No. of splits=10 with the Check box "Required splitting" checked.
Hope this helps for your requireemnt.
-Thaila Shree

Similar Messages

What do I need to do to replace my 80 gig HDD with a larger capacity HDD?

I have an older Mac mini, running OSX 10.6.8 @ 1.83 GHz w/2 GB ram. It is used primarily for email, iPhone photo storage, and online banking. Works, but now I am out of memory. rather than buy a new unit, I'd prefer to replact the 80 GB HDD with a larger capacity drive. What do you recommend?

No such thing as a "PC hard drive". Im sure it comes formatted in MSDOS or otherwise, ...doesnt mean anything.
Ive got a 100 drives laying around here, most came formatted in DOS or Exfat or NTFS , just formatted all of them for Mac.
format the HD as Mac OSX extended journaled ,....takes 5 seconds.
CLONING:
1. grab carbon copy cloner or superDuper CLONE app.
2 attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD or SSD in disk utility in “Mac OS extended journaled”
3. clone internal HD to target HD or SSD (external) [takes about 40 mins depending on size]
4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
5. open bottom (see videos on ifixit or youtube on same) and remove old, install new.
(this video is for a 2012, look at this site for YOUR specific year / model)
http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
Done
(FIRST TIME after installing, boot will be SLOW,...normal and ignore that).
Clone APPS
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/
You said-------
tjcinco
My 80 gb drive has about 1 gb available,
Sounds like an old drive there....... nice Hitachi or Toshiba 1TB external drive is average $70
Time for a new (additional) archive HD for data protection.

What is the usable space of normal redundancy disk group with two uneven capacity fail groups

Hi,
I have a normal redundancy disk group (DATA) with two uneven capacity fail groups (FG1 and FG2). FG1 size is 10GB and FG2 size is 100GB.
In this case what will be the usable space of the disk group (DATA)? is it 10G or 55G?
Thanks,
Mahi

Please, don't duplicate post with same matter.
This question was answered in your previous thread.
Re: ASM normal redundancy disk group

HT3275 how can i retrieve information from time machine if my computer has less storage capacity? How can I access data that is on my time machine but can not be copied to a computer with less storage capacity? I used to have 180 GB, now I have 128 GB.

how can i retrieve information from time machine if my computer has less storage capacity? How can I access data that is on my time machine but can not be copied to a computer with less storage capacity? I used to have 180 GB, now I have 128 GB.

Plug an external drive into the computer and use that to expand data onto.
http://pondini.org/TM/16.html

Does any one know when they'll come out with a bigger capacity ipod touch?

I really like the iPod touch, but 16GB just doesn't cut it for me. Does anyone know if and when they'll come out with a bigger capacity iPod Touch?

I'm with you. I don't need the iPhone, but I'd love the iPod touch -- if it had a larger capacity drive. My current iPod has at least 20 gb of songs, iPhoto libraries, calendar, email, home movie videos.....same with my laptop, which, in turn, I sync to my Apple TV.......if iPhone and iPod are going to interface with our other Mac products, both will need much larger drives.
ALSO: Does the iPod Touch Contacts/Address Book resolve the "birthday" problem on the earlier iPods. When you important contact information from other databases (like filemaker pro, etc), Address Book imports/receives just about any type of data field -- except birthdays. I use AddressBook importer to convert my FilemakerPro files into a format that Address Book can important. All the fields map -- when the importing is done, Address Book simply skips birthday fields. Doesn't make sense. A birthday field is just a date field.....Is that the problem? -- david c in KC

Bomexplosion,workcenter with routing

Purpose
The purpose of this report is to show the summary of Routing details of a Finished component from Raw material via Semi-finished component in a single report.
Concept of BOM for finished components are defined in terms of semi finished goods. Hence, routing of a Finished component from raw materials can not be seen directly in system through standard report.
But users need to have the details of a routing of a Finished component from raw material in one report. To provide the details in single report, development is required.
INPUT IS
MATERIAL
PLANT
 I tried this following method
1. USING CS_BOM_EXPL_MAT_V2
TO explode the bom with header materials- ISTPO-IDNRK
2. after I am using MARC table with the following fields
MATNR,WERKS,BESKZ---- HERE I CLASIFED THE MATERIAL procurement type
E OR X OR F.
3. IF BESKZ = E OR X --- CHECK MAPL with the following fields
 MATNR,WERKS ,PLNTY,PLNNR. PLNTY = N
4. After that I am using the table PLPO with the following fields
PLNTY,PLNNR,VORNR,ARBID,LTXA1,VGE01,VGW01,VGW02,WERKS
5. After I am using the table CRHD with the following fields
OBJID,ARBPL
6. IF MARC BESKZ = F.
7. Using the following table with the fields EORD-MATNR,LIFNR,FLIFN = X
8. After using the EINA with the following fields MATNR,LIFNR,INFNR.
9. After using EINE with the following fields INFNR,APLFZ.
REQUIRED OUTPUT IS
1.material
2.materials description
3.workcenter
4.vendor
5.operation description
6.uom
7.qty
8.setuptime
9.processingtime
10.delivery time
PROBLEM
 On executing the program, the out put contains some extra operations which is not there in the CA03 output of the component.
Please help us in solving this issue.
very urgent
Regards
ds

This is your 5th post about your abap program !
You never closed the other.
In a previous I advice you to check against the validity date of routing, I also suggest you to use FM CARO_ROUTING_READ.
Erwan

Why does the iphone say it has 16 gb but when i plug it in it shows 26.2 gb with only a capacity of 13.4gb?

ok guys i have done my fair share of reading and i am so lost. on my box it says i have a 16 gig iphone 4 verizon white. my question is everytime i plug my phone in it pops up with a little tiny AutoRun icon and i hit open files. well it shows that i have 13.4gb of 26.2gb. but in iTunes it only shows my phone with 13.4 with 12 available for apps and music. why is it that my phone realy has 26 gigs and i can only access half of that?
Is my phone realy using 13gb just for software? that is way to much for me. any body else see this, what about any fixs or what not?

There's no way a 16GB model phone has more than than capacity. I have no idea what you mean by AutoRun icon. Is that an app you downloaded? Did you jailbreak?
The "advertised" capacity of all storage devices is based on a decimal definition of "Gigabytes" where 1 GB is defined as 1,000,000,000 bytes. However computers see and calculate storage based on binary definitions where 1 GB = 1,073 742,824 bytes. Thus a 16 GB "decimal" device is only 14.9 real, binary gigabytes.
Also, there are additional loses due to formatting overhead and the iOS. RAM memory is separate and not used from the supplied flash disk.

QM workcenter with material specification

Hi there ,
I am using the material spec for a material to inspect. Can anyone please suggest me that where can I maintain the QM workcenter for it as we are not using the inspection plan
Regards
Kaushik

Hi.
However, since you cannot predefine work centers in the material specification, but the inspection specifications are defined in the material specification, you must proceed as follows:
a)You create a material specification with master inspection characteristics.
b)You create a dummy inspection plan that only contains one operation with one work center.
c)In the inspection setup (Quality Management view of the material master), set the indicators Insp. with task list and Insp. with mat spec
Amol

How can I fix a problem with incorrect drive capacity?

When I do a get info on the drive capacity it says I have only 2.64gb free. However when I open it and total the folders there is near 300gb free which is what it should be. I can't find what is taking up the space

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Does anyone know if they are selling the 5th generation itouch with a 8gb capacity ?

I don't want to get a 32 gb itouch for 300 so I was wondering if they sold and 8gb version for less. I can't seem to find any post that says it doesn't.

i think they won`t sell an ipod touch 5g with 8 gb because this is too less capacity for much music or apps

Issue / bug with big disk capacity

Hi,
When 10.7 was released i had some issues with big capacity disk, two WD Elements Desktop (3 To).
I had EFI error message after disk verification, i was unable to repair it on OS X or using recovery partition, i was unable to proceed to à complète backup. After Lots of tests i decided to go back to 10.6, Thatcher solved thé problem.
Anyone aware of it ?
Regards

   Re-index Macintosh HD.
   Spotlight reindexing will take a while to finish.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
Note:
If you don’t have Macintosh HD icon on the desktop,
Finder > Preferences > General > Show these items on the desktop:
Enable “Hard disks”.

Has anyone had difficulty with maximum storage capacity after updating their iOS to the newest version?

Ever since I updated my iphone 5 and my ipad I've gotten the message that I've reached maximum storage capacity. Is it the update or what's going on? Also, when you are in itunes, what is the "other" under capacity? That's so vague!

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

ITunes 7.0 - Summary screen - what is up with my "other" capacity?

In the newest version of iTunes - when I am on the summary screen - at the bottom of the page - where you see the color-coded explanation of what is taking up the capacity of one's iPod - the largest part of my used space is listed as "other"(in orange) - and is taking 10.25GB - and yet I have no idea what this is - or how to delet/clear it!!! Any help!? Thanks so much!
Compaq Presario Windows XP

A restore returns the iPod to factory settings, restores the iPod software and erases everything stored on it.
See: See this: Restoring the 5th generation iPod (iPod with video).
The storage space taken up by "Other" can be made up of, notes, podcasts or any files of any kind you've added to the iPod whilst using it as a hard disk. it's not photos which are stored under "photos".
There will always be a few MBs of used space under "other" but yours is unusually large.
If the iPod is enabled for disk use, you can look at the folders on the iPod through Explorer and delete anything you don't want.
Otherwise restore it and reload everything from your iTunes library.

Ipod touch 4th gen with iOS 5 capacity bar says other section is taking up 1.53 GB?

When I sync my ipod touch 4th gen with iOS 5 i have 2.8 GB of music and 1.27 GB of apps and i have a 8 GB ipod but the "other" section is taking up 1.53 GB?? i know thats not normal so how do i fix that?

This indicates corrupt files. A restore should resolve it.

Apps won't sync from iTouch to computer. iTunes recognizes the iTouch and the app content, but the content is grayed out on the computer screen and won't allow me to sync. My iTouch is version 4.2.1 with 6.8GB capacity.

I am on vacation and away from my home computer. I installed iTunes on a computer I'm using at my son's house to enable
me to sync my iTouch, since it has become unstable when I am playing games and continually closes and reverts to the home
screen.
My son's computer recognizes my iTouch and my apps appear on the screen but they are all grayed out and will not allow me
to sync. Can anyone help me please?

Your iPod can only be synced with one iTunes library at a time. If you try to add content to it from another computer it will erase the contents of your iPod and replacement it with the contents of the new library.
In regards to the unstableness, have you tried a hard reset to see if that makes a difference? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

Workcenter with no of capacity 10

Similar Messages

Maybe you are looking for