Workflow 2.6.3 Hex To Haw Error

I have installed the Oracle Workflow 2.6.3 and started to test my processes. When a notification is created, it is delivered to the correspondent user but, in Oracle Workflow Home Page, it appears in error. The error is: ORA-06502: hex to raw conversion error.
In Metalink I read that I must re-install de OWF. Is there any other way??
Thnks

sorry maybe a noob question but does it means io have to install the whole db again?I don't know. Try to install OWF 2.6.4 and maybe it upgarde all compnents from OWF 2.6.3
Are can you choose to install the workflow server only. When i start the install file with the universal installer i can only choose forYou need additional Oracle Database Companion CD, for link look at this message
(from thread which I provided in prev. post)
Re: Create Process Flow
Regards,
Oleg

Similar Messages

Workflow status is 'In progress' instead of 'Error'

Hi all,
In ISU module, most of error message will trigger using message type 'S' (Success).
For example, if the object is locked, it will show message that the object is lock with 'S' (Message).
This problem causes workflow status to be 'In progress' even though it is an error message and transaction stop there.
How can I configure workflow to make in progress to be error? Or set it to be error when it find some success messages that actually are error.
Thanks,
Chaiphon

Thanks for the answers.
I am on ECC 6.0 ISU/CCS.
This workflow is trigger with standard event of object DISCONNECT and I use its standard method as a task to create an order. However, the returned standard message from the mehod are always 'S' type even though it is an error.
Is there anyways to fix this without copying the standard object and create customized method in order to change message from 'S' to 'E' in case it is an error.
Thanks,
Chaiphon

Tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insufficient location information or the request device or resource is not present in the system

Dear Friends,
I am from Jesus Osorio from Tektronix Mexico. I have seen this error messages during the last instalations and I am wonder how could I solve it?
tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insuff...
I am using DPO4000 series, laptop with SE for Tektronix Edition and a USB cable. What should I do to solve this problem?
Regards,
Jesus Osorio
Jesus V. Osorio Lopez
AE

Dear Jesús,
You should check if you have on your PC or Laptop installed VISA. I recommend you this link to download it:
http://digital.ni.com/softlib.nsf/websearch/b1a7837fffd2826e8625729100689d3c
To have a better oportunity in having your issue solved, please contact us in Mexico at this toll free 01 800 010 0793. As well as if you post your following messages in the Spanish Forum, we will be able to help you faster.
Thanks for using National Instruments Forums.
NorSa
NI Applications Engineer Latin America
NorSa
NI Applications Engineer Latin America
Para Soporte entra aquí

Workflow will not manually start - getting Server Error in '/' Application - Runtime Error

I've tested so far in three site collections and I am not able to manually start a workflow. I am getting the below error
Runtime Error
Description: An application error occurred on the server. The current custom error
settings for this application prevent the details of the application error from
being viewed remotely (for security reasons). It could, however, be viewed by
browsers running on the local server machine.
Details: To enable
the details of this specific error message to be viewable on remote machines,
please create a <customErrors> tag within a "web.config" configuration
file located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to "Off".
So, I jumped on the server and checked the logs and this is what I am getting below:
Application error when access /_layouts/15/Workflow.aspx, Error=Method 'StartWorkflowOnListItem' in type 'Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider' from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation. at Microsoft.SharePoint.WorkflowServices.FabricSolutionProviderFactory.<.cctor>b__3(WorkflowServicesContext context) at Microsoft.SharePoint.WorkflowServices.FabricSolutionProviderFactory.GetProvider[T](WorkflowServicesContext
context) at Microsoft.SharePoint.WorkflowServices.WorkflowServicesManager.GetProvider[T]() at Microsoft.SharePoint.WorkflowServices.WorkflowServicesManager.GetWorkflowInstanceService()
at Microsoft.SharePoint.WorkflowService...
I would love some help if anybody has any suggestions.

Hi,
THis is a upgrade issue. Please check below
https://social.technet.microsoft.com/Forums/windowsserver/en-US/b189e4b8-bb9e-4ade-a3d5-cd2e0f90e93f/workflow-not-working-after-installing-service-pack-1-and-patches?forum=sharepointadmin
Please remember to click 'Mark as Answer' on the answer if it helps you

Suspended Workflow in SharePoint 2013 with HTTP 401 Error!

I have a list workflow which starts automatically when creating an item to generate a serial number. But when any user create
a new item, the workflow suspend with the following details, and only the users with "Full Control" permissions can make the workflow work:
RequestorId: eda26c74-95ef-2733-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow
instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["1"],"SPClientServiceRequestDuration":["88"],"SPRequestGuid":["eda26c74-95ef-2733-87b9-028d0512861d"],"request-id":["eda26c74-95ef-2733-87b9-028d0512861d"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"Cache-Control":["max-age=0,
private"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM","Basic realm=\"sp.contoso.com\""],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Sun, 27 Apr 2014 11:13:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)

Hi AmrHanmam,
According to your description, my understanding is that SharePoint 2013 workflow suspend with 401 error.
For resolving your issue , please do as the followings:
Be sure User profile synchronization is started.
The user by whom you are logged is available in User Profile list.
Final step full synchronization of User Profile Application.
Here is a similar post for your reference:
http://social.technet.microsoft.com/Forums/en-US/8671e31e-fde2-454c-aba4-0fc6484dd873/sharepoint-2013-workflow-suspend-with-401-error?forum=sharepointcustomization
In addition, there is another reason for this issue, please take a look at:
http://support.microsoft.com/kb/2839070/en-us
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

SC workflow - "set status to released" step tRFC error

Hi All,
We have a "Shopping Cart without approval" workflow defined in our SRM system.
The workflow is working fine in Develpoment scenario however in Production it is stuck at "set status to released" step.
Checked that step and its a backgroung step with tRFC Object type.
When we click on tRFC Object Type it opens up "Transactinal RFC" screen with msg "error during tRFC call" and tRFC destination field as WORKFLOW_LOCAL_500.
Any help is this regard will be highly appreciated.
TIA
Regards,
Richa Sinha

Hi RS,
havent worked on SRM WF's,
check with BASIS on the Automatic WF Settings in SWU3 tcode, as you maintain RFC there, may be the RFC node in SWU3 is not active or something.
Hope it helps.
Aditya

SP2013 Customize Workflow Task Form with InfoPath 2013 - Unknown error occurred

Hi everyone,
After creating "Collect data from user" workflow using SharePoint designer, I need to customize the task form. But when I open the .xsn file (SharePoint generated), without editing anything (for testing purpose), and publish it, I got the message
box: "An unknown error has occurred. The form template has been published to the server but it can only be opened in InfoPath Filler". I test the same scenario in SharePoint 2010, and it worked. It really annoys me.
No exception in the log file, and no solution after much searching around.
Please help.

Hi john_d
I got the solution to customize the Workflow task form. We cannot customize the workflow task form from InfoPath 2013, and if some how you are able to publish the task form it then when you publish your workflow then it your workflow will overwrite
the default task form to your customized one.
So the solution for it is that whatever fields you want to add to the task form you can just in "TASK FORM FIELDS" and it will display in your task form when you publish your workflow.

Trying to set up an out of the box SP 2010 approval workflow that doesn't generate warnings or errors

I have a custom list for which I want an approval workflow. There is only going to be one stop for the approval - creating an item is a request to a person for a new code to be created.
If I do not turn on content approval, then I get the message:
The workflow could not set content approval status. Enable content moderation for this list and run the workflow again.
When I turn on content approval, then when the users go to the custom list to create an item, they see this message:
Items on this list require content approval. Your submission will not appear in public views until approved by someone with proper rights.
Surely I am missing something obvious. I just want a standard SP 2010 form without warnings to gather info from the user, then to create a workflow task that sends a person an email that they need to approve or reject the request.
The second message is going to cause questions from the users. The person who has to approve the tasks wants to be able to see what requests are awaiting approval vs approved vs rejected.
Is this something that is not doable in SP 2010?

the "Approval Process" step is designed for manipulating the "Moderation Status" (Content Approval status) of a list item... What you are seeing is DESIGNED behavior.
When Content Approval is enabled, content changes are not made public until they have been approved. The Approval workflow sends the email to a manager, who is supposed to approve or reject the change.
If Content Approval is DISABLED, there is no point to the workflow.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

SharePoint Workflow : Call HTTP Webservice action throwing Forbidden Error

Hi,
I have configured workflow which takes value from one workflow variable and opens another List and creates a List item.
I used these as reference:
http://mysharepointinsight.blogspot.in/2013/05/using-sharepoint-rest-services-from.html
and
https://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
Below is the call HTTP action.
Call https://skmsppd.accenture.com/NorthEu... HTTP web service with Variable: POST_Parameters (ResponseContent to response |ResponseHeaders to responseHeaders |ResponseStatusCode to Variable: POST_ResponseCode
While creating Header dictionary, I added a key "Authorization" and value was left blank.
But when execute workflow, new item is not getting created and getting Response code as "Forbidden"
Below is the Workflow History I get:
I want to insert Test 13 to the destination List. But its not working. Please let me know what I need to do?
Regards, Shreyas R S

Hi.
Why don't you use the "Create Item" action?
The list on wich you want to create this item is in the same site collection in wich your wf is running?
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

Driver Status: (Hex 0xBFFF00A6) Primary Error: (Hex 0xBFFF00A6)

I am using a Tektronix o-scope and every time I run initalize.vi I get this error. I never had this problem with previous versions of driver. Any ideas?

Hello,
For the problem description it seems that you have downloaded the instrument driver for this Tektronics scope. If you haven�t you can look for one in ni.com at the Developer Zone or just do a search at the top with the model number of the scope.
One thing you need to check is if the driver version that you have is for the version of LabVIEW that you have and also to check if you don�t need to upgrade any other software and if it is compatible with the OS that you have.
Probably by reinstalling the driver it would fix the problem. You can try on a different computer and see if you have the same problem.
If you still have problems after troubleshoot a bit more, then please provide more information as the scope model numbe
r, driver version, OS, LabVIEW version, 488.2 version, etc.
Thank you
Best Regards
Ricardo S.
National Instruments.

Error on publishing workflow from sharepoint designer

when I try to publish my workflow created with Workflow Designer I get this error message
System.ServiceModel.ServerTooBusyException: The HTTP service located at http://serversp:32843/a5bd4fa831174777a536161331fdf118/AppMng.svc is
unavailable. This could be because the service is too busy or because no endpoint was found listening at the specified address. Please ensure that the address is correct and try accessing the service again later.
---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable. at System.Net.HttpWebRequest.GetResponse()
workflow 2013 is already connected to sharepoint server i get this error on the final step of publishing a workflow

Hi,
As I understand, when you published the workflow in SharePoint Designer you encountered the error.
I suggest you follow the steps below to troubleshoot this issue:
1. You could check if the App Management Service is started. (Go to CA -> System Settings -> Services on server -> check if the App Management Service is started.) If not, start the App Management Service, then perform iisreset.
2. If the issue still exists, you could click start->click “run”->type in “services.msc” ->restart "SharePoint Search Host Service". This is because there is not enough space to start the service. Note that the "SharePoint Search
Host Service" consumes a lot of memory.
The article below is about Error: The Requested Service, AppMng.svc Could Not be Activated.
http://www.c-sharpcorner.com/UploadFile/anavijai/error-the-requested-service-appmng-svc-could-not-be-activa/
There is a similar case:
https://social.msdn.microsoft.com/Forums/en-US/b07e842e-71b8-4e66-a5d3-208a8ba28523/error-occurred-in-deployment-step-install-app-for-sharepoint?forum=appsforsharepoint
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SharePoint 2013 Workflow Lookup Column Error

When I try to use the value from a lookup column (e.g. display the selected value in the body of a email) in a SharePoint 2013 workflow I receive the following error. It works fine if I use the SharePoint 2010 workflow platform, but I always receive a error
with 2013.
First Error:
Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP NotFound to http://portal.test.com/sites/Test/_vti_bin/client.svc/web/lists/getbyid(guid'00000000-0000-0000-0000-000000000000')/Items(10)?%24select=ID%2CLookupId%2CLookup%2FTitle&%24expand=Lookup
Correlation Id: 3fb1bac9-f4b6-bbf1-a664-b3748668ea3c Instance Id: e7b4064d-029d-4a8b-9a75-7939f10e8817
<script type="text/javascript">// <![CDATA[ var errorMessage = "Something went wrong. To try again, reload the page and then resume
the workflow."; var dlg = null; function RetryWorkflow4(instanceName) { showDialog(); var ctx = SP.ClientContext.get_current(); var wfManager = SP.WorkflowServices.WorkflowServicesManager.newObject(ctx, ctx.get_web()); var instanceService = wfManager.getWorkflowInstanceService();
var instance = instanceService.getInstance(instanceName); instanceService.resumeWorkflow(instance); ctx.executeQueryAsync( function(sender, args) { closeDialog(); theForm.submit(); }, function (sender, args) { closeDialog(); alert(errorMessage); } ); } //
]]> </script>
Error from SharePoint Logs:
Microsoft.SharePoint.SPException: List does not exist. The page you selected contains a list that does not exist.
It may have been deleted by another user. ---> System.Runtime.InteropServices.COMException: List does not exist.
The page you selected contains a list that does not exist.
It may have been deleted by another user.     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt,
Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
    at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32
dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData,
Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.ItemByInternalName(String strInternalName, Boolean bThrowException)
at Microsoft.SharePoint.SPListCollection.GetListById(Guid uniqueID, Boolean bThrowException)
at Microsoft.SharePoint.SPListCollection.get_Item(Guid uniqueID)
at Microsoft.SharePoint.SPListCollection.GetList(Guid uniqueId, Boolean fetchMetadata)
at Microsoft.SharePoint.SPListCollection.GetById(Guid uniqueId)
at Microsoft.SharePoint.ServerStub.SPListCollectionServerStub.InvokeMethod(Object target, String methodName, ClientValueCollection xmlargs, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, ClientValueCollection args, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.InvokeMethod(Boolean mainRequestPath, Object value, ServerStub serverProxy, EdmParserNode node, Boolean resourceEndpoint, MethodInformation methodInfo, Boolean isExtensionMethod, Boolean isIndexerMethod)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathMember(Boolean mainRequestPath, String path, Object value, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()

Hi
XantosX5 ,
Thank you for your posting!
According to your description, I try to reproduce your scenario in my SharePoint Server 2013 environment.
I create a lookup column in a list and create a workflow 2013 for the list. In the workflow, I add Send an email action. Then I display the lookup column in the body of the email as the below figure:
When I start the workflow, it works fine.
Have you installed
the workflow manager 1.0 cumulative update 1 ? It can be the point. If not, please install it.
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Workflow error in fork step, process control, wait event

I am using fork step in workflow which has 2 parallel branches. In 1st branch i have a user decision step followed by a task for posting PO document in case of approval. In the 2nd branch of fork step I have a wait step to wait for an event followed by the same task for posting document with a process control step after that in the end to cancel the workitem(workitem generated by user decision step in the 1st branch of fork). I created the event by using a custom BOR object.
After the fork step is triggered, i have both a wait event running and workitem generated. When i raise the wait event from SWUE by entering the event, object key etc it works fine i.e., the workitem in the other branch is set of logically deleted and workflow ends.
But if the wait event is triggered from the program i.e., using FM SWW_WI_CREATE_VIA_EVENT, both get an error message in workflow log(SWIA). The message is: Error when executing the binding between work item 000000XXXXXX and flow item 000000XXXXXX where workitem number is the workitem id of the posting document task and flow item id is the workflow parent id

hi,
message is self explanatory.
Activate the event trace SWELS, then do the event with SWUE and within your program (als please use SAP_WAPI function modules).
Now compare the 2 events in SWEL to see what the differences are .
Kind regards, Rob Dielemans

Error while opening the workflow page

All:
I am trying to install and configure a NW IdM. I am done with the installation. When I try open http://<host>/workflow/index.php, i get the following error:
Login failed for user ''. The user is not associated with a trusted SQL Server connection.PHP Warning: mssql_pconnect() [function.mssql-pconnect]: message: Login failed for user 'mxmc-prov'. (severity 14)
When I try to open http://<host>:monitoring/login.php and login as "mxmc_admin", I get invalid username.
I have "mixed mode" turned on for SQL server and I am able to connect to the database using mxmc_prov and mxmc_admin.
Could someone help me out.
Thanks
S.

Hi Shabnam,
Thanks for the update
Eric

SSL Error while opening the workflow process

Hi,
While opening any workflow status monitor, we are getting below error. One of the hit says that have SSL setup recently, it need few steps to be performed and a patch to prevent below error.
*javax.net.ssl.SSLException: SSL handshake failed: X509CertChainIncompleteErr When Trying To View The Workflow Status Diagram [ID 1375766.1]*
STEPS to reproduce
The issue can be reproduced at will with the following steps:
1. In the Administrator Workflow console
2. Press the Status Diagram button
3. The error is received
Changes
Recently Enabled SSL
Solution
A) Add the wrapper bin parameter for SSL to the jserv.properties file:
1. In Jserv.properties:
Change the following line from:
wrapper.bin.parameters=-Djava.protocol.handler.pkgs=HTTPClient
To:
wrapper.bin.parameters=-Djava.protocol.handler.pkgs=HTTPSClient
2. Bounce the apache server and retest the issue.
3. Migrate the solution as appropriate to other environments.
Note:
To retain the changes permanently when autoconfig runs, please follow Note 270519.1, Section: &quot;Customizing an AutoConfig template file delivered by Oracle&quot;.
1. Create a custom directory if not already present:
mkdir $FND_TOP/admin/template/custom
2. Copy the jserv.properties file to this custom directory:
Change the Following line from:
wrapper.bin.parameters=-Djava.proto .handler.pkgs=HTTPClient
To:
wrapper.bin.parameters=-Djava.protocol.handler.pkgs=HTTPSClient
3. Run Autoconfig and retest the issue.
B) Retest the Workflow Status Monitor.
C) If the issue still exists, pursue the application of Patch 8802559 is titled:
1OFF:8618975:11.5.10.6:WF STATUS DIAGRAM SHOULD OPTIONALLY USE WF: Workflow Mailer Framework Web Agent.
That patch supplies:
fnd java/wf/monitor/webui GraphMonitorCO.java 115.12
========================================================================
After I implemented above steps and applied the patch, now i am getting below error.
javax.net.ssl.SSLProtocolException: java.io.IOException: subject key, Unknown Key spec: Invalid RSA modulus size.
can you please help me in resolving above problem.
Regards,
Kishore.

Hi;
Please review:
Master Note for SSL Configuration in Fusion Middleware 11g [ID 1218695.1]
I can not find any similar issue at metalink.If upper note does not help then I suggest Rise SR
Regard
Helios

Workflow 2.6.3 Hex To Haw Error

Similar Messages

Maybe you are looking for