Workflow Admin - Error Emails

Hi there,
I must admit I am much more of a techie than an "administrator" with regard to workflow and I probably have neglected some of the typical Workflow Admin tasks.
I wonder if you can help me, every Monday morning I get about 4000 emails from R/3 Production....all "workflow error emails", and as you can imagine this does get pretty irritating sometimes
I know we archive WORKITEM pretty often, were are all these "workitems in error"? Do I need to run RSWWERRE? Is there another report that I can run to safely kill all these "error workflows" so that I don't always get hundreds of emails?
Any help would be greatly appreciated
Lynton

Well yes, that is what I want to do...sweep them under the carpet
But in all honesty there MUST be an easy way to solve this issue, I cannot believe all Workflow admin's out there get all these streams of error emails each week.......
Anyway, I will have to look into it again sometime...
Have a good day
Lynton

Similar Messages

  • Sending job error message to admin by email

    Hi everyone...
    Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
    Is there a better way?
    Cheers,
    Jefi Santoso

    hi,
    >>>Can this be achieved through BPM?
    yes you can put your transformation step
    and send step in a block and specify an exception
    branch and catch all exceptions that will
    occur during transformations and the send step
    then you can send info from the exception branch to
    any other system
    you won't be able to catch the error's name
    but you will be able to notify any thinrd party
    about the error
    more on error catching:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
    Regards,
    michal

  • Email id of Workflow Admin

    Hi all,
    I need to get the Email id of the Workflow Admin...Can any one help me in this...
    Thanks & Regards,
    Hari..

    Hi!
    Workflow admin can be a user or postion that will be configred in SWU3. I cant tell you the exact transaction because i dont have system right now.
    Then u take that user and go to SU01.
    Thanks & Regards,
    Manoj

  • Error email

    Hi
    I would like to send an error email whenever the workflow encounters any errors during processing. Does anyone know how can this be done ?

    In transaction SWDC_RUNTIME you can define a workflow administrator who will receive sap mails when workflows are in error. If you want these to become real emails, the user you define as admin should set-up an automatic forwarding rule in his SAP workplace (SBWP > Settings > Office settings tab automatic forwarding).
    In the basic data of each workflow definition you can also define administrator. This one has priority over the first one (i.e. the generic wf admin is used only if there is no specific one).
    Hope this helps.
    Patrick

  • How to find the workflow admins for all costcenters ?

    Dear SRM gurus
    We are using Classic scenario with N th step workflow with BADI.
    we have a requirement.
    How to find the workflow admins for the particular costcenters.
    we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
    used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
    Is there anyway to find all the admins for a cost center(users are more than 7000+)
    can anybody send work flow related presentations or cookbook
    Thanks in Advance.
    srinu

    hi
    I have not received any thing.Please send again
    [email protected]
    [email protected]

  • Error Emails from BPM Process Administration Console

    I am able to send error email to a single e-mail Id after configuring it in BPM Process Administrator(Engine-Networking tab).
    How do I sent e-mail to multiple user?
    I tried comma separated. It didnt work.
    Anyone can help on this?
    I get error something like below.....
    will be notified. Original exception is: Illegal address Caused by: Illegal address java.io.IOException: Illegal address at fuego.io.SMTPClient.sendMail(SMTPClient.java:323) at fuego.io.SMTPClient.sendMail(SMTPClient.java:341) at fuego.server.service.MailNotificationDispatcher.sendNow(MailNotificationDispatcher.java:157) at fuego.ejbengine.service.EJBMailNotificationDispatcher.send(EJBMailNotificationDispatcher.java:55) at fuego.server.service.ServerMailLogOutput.doOutput(ServerMailLogOutput.java:116) at fuego.log.LogOutput.output(LogOutput.java:187) at fuego.log.LogSystem$LogItemDispatcher.logItems(LogSystem.java:980) at fuego.log.LogSystem$LogItemDispatcher.run(LogSystem.java:863) Caused by: javax.mail.internet.AddressException: Illegal address in string
    Edited by: sideeque on Feb 16, 2011 7:56 AM

    Not the answer you wanted and sure you already thought of this, but try using a group email address inside the Process Admin email field.
    Dan

  • Creating Open Directory Replica fails with Server Admin Error Value 1127

    Hallo,
    I have seen a lot of similar threads here and they were helpful up to a certain point, but in the end, they did not solve my problem.
    Currently, it comes down to this. The Server Admin Error message ist really meaningless and I could not find a single for the error value on the whole wide web. As such, I switched to the command line versions of the tools involved to geht more meaningful results. It worked. Specifically, creating a replica of an openldap master means using slapconfig.
    When executing
    slapconfig -createreplica master.ourdomain.com diradmin
    as root on the prospective replica machine, I get the following error message:
    ssh command failed with status 127
    That command is not allowed with the root account via public key authentication.
    That makes perfect sense to me, but how is it meant to work then?
    Executing slapconfig as admin tells me that this tool is to be executed as root. On the other hand, root login via ssh is not allowed in Mac OS X by default, which seems fine to me. I even changed /etc/sshd_config on the Open Directory Master machine to "PermitRootLogin yes". However, neither reloading ssh using launchctl nor restarting the whole server made this setting operational. Trying to login from command line as root still tells me:
    root login is not permitted to this machine via public key authentication.
    While this is the current state where I need help urgently, I changed some other things before. I tell about to exclude these issues as possible reason of failure. I got this message for quite a while:
    Replica Setup failed : This machine does not have a valid computer name
    I was sure, this machine meant the target machine, the open directory master, because the domain had changed there once before I had taken over responsibility as an admin in this environment. And in fact, changeip disguised an issue there. The command proposed by changeip to fix the situation did not seem appropriate because this machine is multihomed with a public and a private IP adress. Proper name resolution is available for both interfaces including reverse lookup. I dont like this setup, but it was the only way to get mail service running smoothly. Running changeip on the machine itself using these arguments
    changeip /LDAPv3/127.0.0.1 internalIP internalIP old.ours.com current.ours.com
    reported success in updating password server, open directory, both interfaces, hostconfig (which in fact did not change) and samba. It reported an issue with kadmin which is related to Kerberos (we dont use Kerberos yet).
    Changing the hostname of the server using changeip did not solve the issue. I then found the hint to check with scutil. This showed that the Hostname was not set on the prospective replica machine. (A question aside: in how many place is the hostname stored? The traditional /etc/hostname has gone, but seems to be replaces with several other configuration files and databases. I cant see this as an advantage). Setting the hostname using scutil worked fine. However, it did not solve the problem either. At least, slapconfig now started to complain about not being able to log in as root instead of failing from the start.
    I also checked all log files on bboth machines that might have to do with openldap, as there are /var/log/slapd.log, /var/log/system.log and /Library/Log/slapconfig.log. I also checked the log of th layer on top of openldap which is /Library/Log/DirectoryService.server.log. None of them revealed anything noticeable beside a lot of of entries that I have googled in the last few hours and which all dont seem to be associated with the problem in question.
    I will take a break now, but I have to fix this until tomorrow and I hope to get the ultimate hint from you, dear reader.
    Thanks and bye, Christian Völker

    ssh command failed with status 127
    That command is not allowed with the root account via public key authentication.
    Initial OD replication takes place via 'ssh'. If you have 'sshd' configured on the OD Master to authenticate with public keys then the OD replica will not be able to communicate with the OD Master via 'ssh'. You must configure the OD Master to use 'ssh' with password authentication and root login enabled.
    Demote the replica back to standalone. Stop any services that you may have running on the primary network interface. Then stop any services that you may have running on the secondary network interface. In the 'Network' System Prefpane remove the IP number from the secondary interface then deactivate the secondary network interface.
    Assign the private IP address and hostname that you wish to use for the replica to the primary network interface. Assign the 'public' IP number to the secondary interface. Check the DNS to see that the IP address and hostname for the primary network interface resolve both forward and reverse for the hostname of the replica that you have chosen. If it does not, fix your DNS before proceeding.
    In the 'Sharing' System Prefpane, change the name of the machine to the hostname (server.domain.tld) of the replica that you have chosen. Then use 'changeip -checkhostname' to see if the IP/hostname matches. Fix it if it doesn't.
    Then configure the /etc/sshd_config file on the OD master like this:
    \# Authentication:
    PermitRootLogin yes
    PasswordAuthentication yes
    PubkeyAuthentication no
    and the /etc/ssh_config file on the OD replica like this:
    PasswordAuthentication yes
    PubkeyAuthentication no
    Then from the OD replica as the 'root' user issue:
    slapconfig -createreplica <ODMasterIPorFQDN> <diradmin user>
    Make sure that the 'diradmin' user's password contains only alpha-numeric characters -no 'option-characters' or symbols, change it first if it does. Once the process completes, reactivate the secondary interface for the 'public' IP and check the configuration of services that will be using that IP, then start your other services. Secure the 'ssh' service on both machines to disable password authentication and 'root' logins.

  • Custom Workflow Load Error in Power Center error code 36331

    Hi,
    I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
    I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
    Version 9.0.1
    When i run a load i am getting the error code 36331.
    And the Workflow Log shows the below:
    *ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
    The DAC log file is as follows
    *3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
    *=====================================*
    STD OUTPUT
    *=====================================*
    Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Tue Feb 05 17:23:28 2013
    *Connected to Integration Service: [BIAIS].*
    *Integration Service status: [Running]*
    *Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
    *Integration Service current time: [Tue Feb 05 17:23:29 2013]*
    *Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
    *Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
    *Workflow run status: [Failed]*
    Workflow run error code: [36331]
    *Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
    Workflow run id [1052].
    *Start time: [Tue Feb 05 17:23:08 2013]*
    *End time: [Tue Feb 05 17:23:13 2013]*
    *Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
    *Workflow run type: [User request]*
    *Run workflow as user: [Administrator]*
    Run workflow with Impersonated OSProfile in domain: []
    *Integration Service: [BIAIS]*
    Disconnecting from Integration Service
    Completed at Tue Feb 05 17:23:29 2013
    *=====================================*
    ERROR OUTPUT
    *=====================================*
    *3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
    Status Desc : Failed
    WorkFlowMessage :
    *=====================================*
    STD OUTPUT
    *=====================================*
    Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Tue Feb 05 17:23:28 2013
    *Connected to Integration Service: [BIAIS].*
    *Integration Service status: [Running]*
    *Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
    *Integration Service current time: [Tue Feb 05 17:23:29 2013]*
    *Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
    *Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
    *Workflow run status: [Failed]*
    Workflow run error code: [36331]
    *Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
    Workflow run id [1052].
    *Start time: [Tue Feb 05 17:23:08 2013]*
    *End time: [Tue Feb 05 17:23:13 2013]*
    *Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
    *Workflow run type: [User request]*
    *Run workflow as user: [Administrator]*
    Run workflow with Impersonated OSProfile in domain: []
    *Integration Service: [BIAIS]*
    Disconnecting from Integration Service
    Completed at Tue Feb 05 17:23:29 2013
    *=====================================*
    ERROR OUTPUT
    *=====================================*
    Error Message : Unknown reason for error code 36331
    ErrorCode : 36331
    *3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
    *3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
    Status Desc : Failed
    WorkFlowMessage :
    *=====================================*
    STD OUTPUT
    *=====================================*
    Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Tue Feb 05 17:23:28 2013
    *Connected to Integration Service: [BIAIS].*
    *Integration Service status: [Running]*
    *Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
    *Integration Service current time: [Tue Feb 05 17:23:29 2013]*
    *Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
    *Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
    *Workflow run status: [Failed]*
    Workflow run error code: [36331]
    *Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
    Workflow run id [1052].
    *Start time: [Tue Feb 05 17:23:08 2013]*
    *End time: [Tue Feb 05 17:23:13 2013]*
    *Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
    *Workflow run type: [User request]*
    *Run workflow as user: [Administrator]*
    Run workflow with Impersonated OSProfile in domain: []
    *Integration Service: [BIAIS]*
    Disconnecting from Integration Service
    Completed at Tue Feb 05 17:23:29 2013
    *=====================================*
    ERROR OUTPUT
    *=====================================*
    Error Message : Unknown reason for error code 36331
    ErrorCode : 36331
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
    I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
    Many thanks for any help in advance.

    Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
    is Commands executed :
    pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
    If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
    Was Execution Plan built before Starting it.
    Let me know if this helped.
    Regards,
    Jay

  • DAC Workflow run error code: [36331]

    Dear all ,
    I want to Integrate OBIEE with Oracle R12.1.1
    Initially I have defined new container & Phyiscal Data Sources in DAC
    Datawarehouse Test Connection Successful
    ORA_R1211 Test Connection Successful
    FlatFile Connection ?
    After that I created new Plan & generate the parameter and also built it successfully but when I run that execution plan it give error.
    Please any one can help me regarding this issue.
    also provide me step by step document to integrate OBIEE with Oracle R12.1.1
    Regards,
    Yasir

    Kindly See the log of last ETL run........
    494 SEVERE Wed Dec 08 18:11:04 GMT+05:00 2010
    START OF ETL
    495 SEVERE Wed Dec 08 18:11:45 GMT+05:00 2010 Starting ETL Process.
    496 SEVERE Wed Dec 08 18:11:50 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
    497 SEVERE Wed Dec 08 18:12:12 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    498 SEVERE Wed Dec 08 18:12:22 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
    499 SEVERE Wed Dec 08 18:12:44 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    500 SEVERE Wed Dec 08 18:13:04 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
    501 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
    502 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
    503 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
    504 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
    505 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
    506 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
    507 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
    508 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
    509 SEVERE Wed Dec 08 18:13:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
    510 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    511 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    512 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    513 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
    514 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
    515 SEVERE Wed Dec 08 18:14:23 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    516 SEVERE Wed Dec 08 18:14:30 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    517 SEVERE Wed Dec 08 18:14:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    518 SEVERE Wed Dec 08 18:14:38 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    519 SEVERE Wed Dec 08 18:14:42 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    520 SEVERE Wed Dec 08 18:14:43 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
    521 SEVERE Wed Dec 08 18:14:49 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    522 SEVERE Wed Dec 08 18:14:58 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
    523 SEVERE Wed Dec 08 18:15:05 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
    524 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
    525 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
    526 SEVERE Wed Dec 08 18:15:17 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
    527 SEVERE Wed Dec 08 18:16:04 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    528 SEVERE Wed Dec 08 18:16:16 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    529 SEVERE Wed Dec 08 18:16:17 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    530 SEVERE Wed Dec 08 18:16:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    531 SEVERE Wed Dec 08 18:16:28 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    532 SEVERE Wed Dec 08 18:16:57 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    533 SEVERE Wed Dec 08 18:17:22 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
    534 SEVERE Wed Dec 08 18:17:31 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    535 SEVERE Wed Dec 08 18:17:58 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
    536 SEVERE Wed Dec 08 18:18:21 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    537 SEVERE Wed Dec 08 18:21:36 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    538 SEVERE Wed Dec 08 18:22:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
    539 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap' has completed with error code 0
    540 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Bank_Branch_Name' has completed with error code 0
    541 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Cust_Class' has completed with error code 0
    542 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Uom_Code' has completed with error code 0
    543 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_CostCenter' has completed with error code 0
    544 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
    545 SEVERE Wed Dec 08 18:22:27 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method' has completed with error code 0
    546 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    =====================================
    STD OUTPUT
    =====================================
    Informatica(r) PMCMD, version [8.6.1 HotFix11], build [457.0505], Windows 32-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Wed Dec 08 18:23:43 2010
    Connected to Integration Service: [Oracle_BI_DW_Base_Intergration_Service].
    Integration Service status: [Running]
    Integration Service startup time: [Wed Dec 08 17:05:35 2010]
    Integration Service current time: [Wed Dec 08 18:23:46 2010]
    Folder: [SDE_ORAR1211_Adaptor]
    Workflow: [SDE_ORA_CodeDimension_Payterm_Ap] version [1].
    Workflow run status: [Failed]
    Workflow run error code: [36331]
    Workflow run error message: [WARNING: Session task instance [SDE_ORA_CodeDimension_Payterm_Ap] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_Payterm_Ap] will be failed.]
    Workflow run id [103].
    Start time: [Wed Dec 08 18:22:13 2010]
    End time: [Wed Dec 08 18:23:38 2010]
    Workflow log file: [F:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_CodeDimension_Payterm_Ap.log]
    Workflow run type: [User request]
    Run workflow as user: [Administrator]
    Run workflow with Impersonated OSProfile in domain: []
    Integration Service: [Oracle_BI_DW_Base_Intergration_Service]
    Disconnecting from Integration Service
    Completed at Wed Dec 08 18:23:46 2010
    =====================================
    ERROR OUTPUT
    =====================================
    547 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Payterm_Ap
    548 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    =====================================
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    ::: CAUSE :::
    MESSAGE:::Execution of child batch Informatica Session Batch failed.
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:340)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    954 SEVERE Wed Dec 08 18:31:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    955 SEVERE Wed Dec 08 18:32:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_GLLinkageInformationGeneral_Full.txt SIL_GLLinkageInformationGeneral_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    956 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 ETL seems to have completed. Invoking shut down dispatcher after the notification from the last running task.
    957 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Finishing ETL Process.
    958 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 MESSAGE:::Some steps failed.
    EXCEPTION CLASS::: com.siebel.etl.engine.bore.SomeSessionsFailedException
    com.siebel.etl.engine.bore.NewDispatcher.execute(NewDispatcher.java:302)
    com.siebel.etl.engine.bore.NewDispatcher.run(NewDispatcher.java:121)
    java.lang.Thread.run(Thread.java:619)
    959 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Dispatcher thread completed.
    960 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Number of incomplete tasks whose status got updated to stopped :0
    Number of incomplete task details whose status got updated to stopped :2630
    961 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
    *     CLOSING THE CONNECTION POOL DataWarehouse
    962 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
    *     CLOSING THE CONNECTION POOL ORA_R1211
    963 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
    END OF ETL
    --------------------------------------------

  • Workflow mailer error

    Hi ,
    I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again  and found Workflow mailer working fine....I didnt get what happened on this...
    friends, If you have any idea on this, please share

    Pl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer          (Doc ID 463354.1)
    Unable To Start Workflow Notification Mailer          (Doc ID 418329.1)
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues          (Doc ID 753845.1)
    Workflow Mailer Will Not Start Stays In Starting Status          (Doc ID 837893.1)
    Unable To Connect To The Mail Account. Check The Host, User Name And Password          (Doc ID 1123684.1)
    HTH
    Srini

  • Workflow in Error state in SWI1 tx, but still table is updating as usual, weird!!

    Hello,
    We have a custom workflow, z_workflow.
    In this z_workflow, its calling a custom FM, z_fm.
    In this z_fm, I'm updating a custom tbale, z_table.
    Before writing UPDATE z_table, I am locking this z_table by using 'ENQUEUE_E_TABLE', as below,
    Pls. note this workflow is triggering in BACK GROUND by WF-BATCH user
    CALL FUNCTION 'ENQUEUE_E_TABLE'
                      EXPORTING
                        mode_rstable   = 'E'
                        tabname        = 'Z_TABLE'
                      EXCEPTIONS
                        foreign_lock   = 1
                        system_failure = 2
                        OTHERS         = 3.
                    IF sy-subrc = 0.
                      UPDATE z_table
                       SET matnr = ls_mara-matnr
                              descr = lv_text
                        WHERE ref_id = ref_id.
                      CALL FUNCTION 'DEQUEUE_E_TABLE'
                        EXPORTING
                          mode_rstable = 'E'
                          tabname      = 'Z_TABLE'.
                     ELSE.
                         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. =====>
    ==> If the lock is failing an an ERROR / 'E' type message is occuring, but still the 'Rest of the code blocks' are executing normally (where in 2nd_z_table is updating), but the workflow is ending up in 'Error state' in SWI1 (workflow log) transaction, our users who are monitoring this workflow thinking that the transaction went bad, but again they noticed that the 2nd_z_table is updating as usual!!                         
                    ENDIF.
                    Rest of the code blocks ==> here another custom tbl, 2nd_z_table is updating
    Our workflow expert said that, the error is occuring, well, but as its (z_fm) calling from / by back ground workflow user, hence the 'Rest of the code blocks' are triggering normally and the 2nd_z_table is updating as usual, but overall the workflow ends up in error state!
    To avoide this confusing situation (workflow in error, but rest of the code blocks are executing normally), workflow expert suggested the below approach (raising of EXCEPTION in z_fm instead of ERROR message), pls. suggest me is it OK / safe / works good for me?
    DO 10 TIMES. => Workflow expert asking me to add all these blue lines to my code
                    CALL FUNCTION 'ENQUEUE_E_TABLE'
                      EXPORTING
                        mode_rstable   = 'E'
                        tabname        = 'Z_TABLE'
                      EXCEPTIONS
                        foreign_lock   = 1
                        system_failure = 2
                        OTHERS         = 3.
                    IF sy-subrc = 0.
                      UPDATE z_table
                       SET matnr = ls_mara-matnr
                              descr = lv_text
                        WHERE ref_id = ref_id.
                      CALL FUNCTION 'DEQUEUE_E_TABLE'
                        EXPORTING
                          mode_rstable = 'E'
                          tabname      = 'Z_TABLE'.
                      CLEAR lv_locking_failed_on_z_table.
                      EXIT.
                    ELSE.
                      WAIT UP TO 1 SECONDS.
                      lv_locking_failed_on_z_table = abap_true.
                    ENDIF.
                  ENDDO.
                  IF lv_locking_failed_on_z_table IS NOT INITIAL.
                    RAISE exception_lock_failed.  ===> Does the Raising EXCEPTION is solve my problem? pls. suggest me
                    RETURN.
                  ENDIF.
    workflow expert said with this raising of exception will not trigger 'Rest of the code blocks' so that user will be not confused
    Thank you

    Hi "3SAP"
    Yes, your WF guy is correct - raising exception will stall the workflow and not execute to the second table update.
    Moreover, second table update logic should be kept inside of the SY-SUBRC = 0 of locking on FIRST TABLE update.
    In current case, I cannot say for sure that second table is getting updated in the same call because as soon as TYPE 'E' message is triggered in a background step, standard exception is triggered in the workflow runtime to stop execution - which will NOT execute the code after MESSAGE statement.
    As mentioned by Mike, the second table may have been updated from another instance/session/etc but from not this one.
    Regards,
    Modak

  • Error coming out of Workflow restart - Error:OBJECTS_OBJREF_NOT_ASSIGNED_NO

    Hi all,
    After restarting the workflow through SWPR we are getting an error message as per mentioned below.
    Error coming out of Workflow restart - Error:OBJECTS_OBJREF_NOT_ASSIGNED_NO.
    Kindly suggest what can be the possibility of the error. I scehduled the SWPR program in the background and passed some workflows and getting this error message in the background job. Kindly suggest.
    Thanks,
    Neslin.

    I think you need to analyse the Workflow log and then try to restart. I think you might have to change the container element value in order to remove the error. Please check and act accordingly.
    Thanks
    Arghadip

  • Workflow Customizing Error: "Workflow: No workflow definition found"

    Hi experts,
    I am currently configuring Workflow on our newly installed ECC 6.0 using the Automatic Workflow Customizing (SWU3).
    I was able successfully executed all necessary items including the RFC destination but when i choose the 'Start Verification Workflow', this error appears: "Workflow: No workflow definition found".
    I tried logging in and out of the system, and repeating the execution of each item but the same error still occurs.
    I read a thread that says it might do something with WF-BATCH but i was able to set it as the RFC destination; WF-BATCH has the following settings in SU01:
    Username: WF-BATCH
    User Type: System
    User Group: SUPER
    Authorization: SAP_ALL, SAP_NEW
    Hope somebody can help me resolve this issue as soon as possible.
    Thanks in advance.
    Regards,
    Dex

    Hi Dex,
    Have you maintained the Number ranges in Transaction SWU3?
    If so, then test the workflow from SWDD itself.
    I think you gave the wrong workflow ID in the SWUS transaction.
    First try with SWDD and then check it in SWUS Transaction.
    Thanks,
    Viji.

  • UCM11g: Workflow notification sends email TWICE

    Hi guys,
    I have a problem with the sending notification email from UCM11g workflow. One step of my workflow sends notification email TWICE. I don't know why. I checked the workflow settings, the UCM settings and i cannot find where is the problem.
    I have second environment with THE SAME workflow. This environment sends email correcty. What is different? First environment is connected to Active Directory. Nothing else.
    Do you have Ideas?
    Thank you
    Martin

    Hi,
    The step is very easy. What is interesting, that on Testing environment is the sending emails correct.
    Audit Log:
    Start of sending
    mail/6     02.16 13:59:53.995     send email queue     background mail thread starting
    mail/6     02.16 13:59:53.996     send email queue     Background mail thread active -- 1 packages remain
    First email
    resourceloader/7     02.16 13:59:54.006     send email queue     not loading page REVIEWER_MAIL because it is up to date with timestamp 1302721902000
    resourceloader/7     02.16 13:59:54.007     send email queue     Checked resources files and 0 out of 98 have changed and it required 0 milliseconds to do the check
    mail/6     02.16 13:59:54.008     send email queue     to: [[email protected]] subject: Content item 'ININV000299BE2011' is ready for workflow step 'BE_ATP_User_stp'. from: dDocName: ININV000299BE2011 dID: 2661 encoding=utf-8 javaEncoding=UTF8
    Second email
    resourceloader/7     02.16 13:59:55.391     send email queue     page REVIEWER_MAIL is already loaded by this ExecutionContext.
    mail/6     02.16 13:59:55.391     send email queue     to: [[email protected]] subject: Content item 'ININV000299BE2011' is ready for workflow step 'BE_ATP_User_stp'. from: dDocName: ININV000299BE2011 dID: 2661 encoding=utf-8 javaEncoding=UTF8
    Definition is:
    - users can review and edit(replace) the current revision
    Exit condition:
    - At least this many reviewers: 1
    Events:
    - Entry
    <$wfUpdateMetaData("xInv_Current_Step", "User")$>
    <$wfUpdateMetaData("xInv_Cancel", "False")$>
    <$wfReleaseDocument()$>
    -Exit
    <$if xInv_Cancel like "True"$>
    <$wfSet("wfJumpName", "Cancel")$>
    <$wfSet("wfJumpTargetStep", "BE_ATP_Cancel_stp\@BE_ATP_FLOW")$>
    <$wfSet("wfJumpEntryNotifyOff", "0")$>
    <$elseif xInv_Back_to_eRegistry like "1"$>
    <$wfSet("wfJumpName", "Back_to_eRegistry")$>
    <$wfSet("wfJumpTargetStep", "BE_ATP_eRegistry_stp\@BE_ATP_FLOW")$>
    <$wfSet("wfJumpEntryNotifyOff", "0")$>
    <$elseif xInv_Next_step like "Section manager"$>
    <$wfSet("wfJumpName", "Jump_man_stp")$>
    <$wfSet("wfJumpTargetStep", "BE_ATP_Manager_stp\@BE_ATP_FLOW")$>
    <$wfSet("wfJumpEntryNotifyOff", "0")$>
    <$endif$>
    Thanks
    Martin
    Edited by: Martin Bikl on 16.2.2012 14:12

  • Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1-28c8-409d-bc65-7115bc17edfa

    Hello Friends,
    I have developed a custom sequential workflow in SharePoint Server 2010 using VS 2010. My workflow gets activated and then creates a new task in the Tasks List.
    But "Error Occurred" gets displayed in the Workflow column in the default view of my document library instead of "In Progress".
    I debugged my code and there are no errors in it. But I found the below error in \14\LOGS\:
    "SharePoint Foundation Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1-28c8-409d-bc65-7115bc17edfa"
    I have set the properties correctly for the workflow activities in VS 2010.
    Can anybody help me solve this error?
    Thanks in advance...
    Regards,Gautam Kaikini.

    I am having the same issue, here is some of the logging errors I am seeing.  If anyone has any ideas I would be forever in your debt,
    02/24/2011 11:32:47.52 w3wp.exe (0x0A14)                      
    0x0F40
    SharePoint Foundation         Workflow Infrastructure      
    88xr Unexpected
    WinWF Internal Error, terminating workflow Id# 4128e252-208e-4d6c-8772-12c51959038e
    616e0e48-457e-4620-8191-dbe40c9af587
    02/24/2011 11:32:47.52 w3wp.exe (0x0A14)                      
    0x0F40
    SharePoint Foundation         Workflow Infrastructure      
    98d4 Unexpected
    Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.     at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
    sourceAccounts, Type targetType, Boolean forceSuccess)     at System.Security.Principal.NTAccount.Translate(Type targetType)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedSuffix)
        --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedSuffix)     at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String
    fullName)     at Microsoft.SharePoint...
    616e0e48-457e-4620-8191-dbe40c9af587
    02/24/2011 11:32:47.52* w3wp.exe (0x0A14)                      
    0x0F40
    SharePoint Foundation         Workflow Infrastructure      
    98d4 Unexpected
    ....SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous)     at Microsoft.SharePoint.SPSite.GetSPRequest()
        at Microsoft.SharePoint.SPSite.get_Request()     at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint)     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForWorkflow(SPWorkflow wf, SPWorkflowUserContext
    runAsUser)     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.get_Web()     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForListItemService()     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.UpdateModerationStatus(Guid
    id, Guid listId, SPItemKey itemKey, SPModerationStatusT...
    616e0e48-457e-4620-8191-dbe40c9af587
    02/24/2011 11:32:47.52* w3wp.exe (0x0A14)                      
    0x0F40
    SharePoint Foundation         Workflow Infrastructure      
    98d4 Unexpected
    ...ype newModerationStatus, String comments)     at Microsoft.Office.Workflow.Actions.SetTaskProcessItemModerationStatus.DoUpdate(ActivityExecutionContext context)     at Microsoft.SharePoint.WorkflowActions.WaitForDocumentUnlockActivity.Execute(ActivityExecutionContext
    executionContext)     at Microsoft.Office.Workflow.Actions.SetTaskProcessItemModerationStatus.Execute(ActivityExecutionContext context)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext
    executionContext)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
        at System.Workflow.Runtime.Schedule...
    616e0e48-457e-4620-8191-dbe40c9af587
    02/24/2011 11:32:47.52* w3wp.exe (0x0A14)                      
    0x0F40
    SharePoint Foundation         Workflow Infrastructure      
    98d4 Unexpected
    ...r.Run() 616e0e48-457e-4620-8191-dbe40c9af587
    Thanks in advance!

Maybe you are looking for

  • JTable and ResultSet TableModel with big resultset

    Hi, I have a question about JTable and a ResultSet TableModel. I have to develop a swing JTable application that gets the data from a ResultSetTableModel where the user can update the jtable data. The problem is the following: the JTable have to cont

  • How do I  set the default view size when I open a word.doc from mail

    I use the mail program all day long and open MS Word docs and the size is default of 100% but the actually view of the screen make it look like a font of 7 or 8 I have a difficult time even viewing the document until I blow it up to 150%. It's not be

  • 30" Display power problems

    I have a user that is having an issue with his 30" display every so often goes black and acts like it has no power at all. The weird thing is that it will be dark for some time and some messing around it will come back. Today it took about an hour of

  • Unable to call local function in select statement.

    Hi all, I am unable to call the local function in select statement in below scenario. DECLARE l_cnt NUMBER; FUNCTION FUN1 RETURN NUMBER AS BEGIN RETURN 2; END; BEGIN SELECT FUN1 INTO l_cnt FROM DUAL; DBMS_OUTPUT.PUT_LINE(l_cnt ); END; /Any alternate

  • Duplex scanning Acrobat 9 Pro

    We have Windows XP Professional SP3 and we recently purchased an Epson GT-2500 scanner. When using the EpsonScan utility, duplex scanning works perfectly. But when using Acrobat 9 Professional it will only scan single sided. I have: - updated the Acr