Workflow Analyzer shows unknown status for workflows and trace disabled
Some servers monitored by SCOM are affected by the issue where I cannot trace workflows with Analyzer. Statuses are showing as unknown, trace is disabled. If an agent cache is flushed and health service is restarted it works for a first session showing only
some IIS workflows.
Can it be fixed somehow?
Guntars Svilpe
<ProbeActionModuleType ID="Microsoft.SystemCenter.GetWorkflowsReportProbe" Comment="requests list of running or failed workflows for management group/instance" Accessibility="Public" Batching="false" PassThrough="false">
<Configuration><xsd:element name="ManagementGroupId" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" /><xsd:element name="ManagedEntityId" type="xsd:string" minOccurs="0" maxOccurs="1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
/><xsd:element name="Status" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:simpleType><xsd:restriction base="xsd:string"><xsd:enumeration value="Failed" /><xsd:enumeration value="Running" /></xsd:restriction></xsd:simpleType></xsd:element></Configuration>
<ModuleImplementation Isolation="Any">
<Native>
<ClassID>A580661D-6314-4FB5-AD54-6ECBAFD83230</ClassID>
</Native>
</ModuleImplementation>
<OutputType>System!System.BaseData</OutputType>
<InputType>System!System.BaseData</InputType>
</ProbeActionModuleType>
<ClassID>A580661D-6314-4FB5-AD54-6ECBAFD83230</ClassID> Is it a black box?
Guntars Svilpe
Similar Messages
-
Intermittant "Unknown Status" for POA and MTA
Hello,
I'm getting intermittent "Unknown Status" in my GroupWise monitor for both my MTA and POA for a certain location. When I check the console for these two agents, they look just fine...
The box running GroupWise monitor is on the same physical location as the MTA and POA that is having the issue.
All of my other MTA and POA's at our primary remote location are just fine.
I've already verified that the SNMP strings are correct - they are identical to the working MTAs and POAs...
If there isn't a way to repair this issue, could someone please come up with a way from preventing "Unknown Status" messages from making it to my inbox? I've already tweaked the "Minimum Threshold level for notiifcation" to critical, yet it continues to "SPAM" me with "Unknown Status" messages...
If there isn't a way to "tune it out" of monitor, then I guess I'll just go ahead and make a rule in my GroupWise client to "move to trash" any "unknown status" messages... At least that will allow me to see any notifications of real problems...
Thanks! :)wspotkaeff,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
i published my app and it shows us (waiting for review) and how much time it will take to (Ready for sale) ?
5-10 days or longer.
-
I have ipod touch for the last two years. I had not used it for long time now, since my computer has been changed I can not synce it as its asking for passcode and its disabled now. I had not saved the password. I also can not format it. Pl help me.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps.. -
DIM Workflow - How can I return task status for workflow process
Hi all,
I'd like to build a DIM workflow process to run a unix shell script. Under the workflow, I've created a task object and assign the unix shell script into it.
Although the DIM workflow works fine to run the unix shell script in the normal case, however, it cannot return the error status in the task when my shell script is failed (such as exit 2 at the end of script).
May I know if there any setting in the workflow/task, in order to change the status on DIM workflow.
Many thanks,
hwHi Ramesh
Thanks for your reply but is it possible that i can go in as sysadmin user and update the notification .I tried looking into the sysadmin user and workflow admin but i couldnt find it .It says that i cant update the notification that has already been approved -
Phones showing unknown status but check physically the phones are registered ok
Hi,
Would like to know the following,
The publisher and subscriber both show the phones of one particular cluster showing all the phones in unknown status but if we checked them physically the phones are registered well and able to make calls and received calls
Both of the version are 7.1
Thanks
AlanAditya
Thanks for your response.
There are 5 nodes in the cluster ( 1Pub + 4Sub).
Phones are registered with subscriber.
If I login the subscriber web page, the status showing registered. But if I login Publisher web page the status showing unknown. Phones are Physically registered. I restarted the RIS service but no use. DB replication status showing 2.
Thanks
Venkkatesh.L -
Keynote and Pages show unknown error editing tables and charts
It is about 2 weeks that I am unable to edit charts and tables in both Keynote '09 and Pages '09 via the information panel. Adding a table or chart causes an unkown error without crashing the entire program but restricting editing both object types with the implemented attributes covered at the bottom of the application's task bar.
I am running the lastest versions and OS. Deleting the plist files or font repair doesn't change anything to the situation.
Someone else experiencing this phenomenon and may found a solution?Hi Kyn,
By right click i assume you refer to ctrl key and click.
The option Show Package Contents does NOT show.
Duplicating the file and making a zip does not reveal more either.
And yes, i saved the docs and copy them to a pen drive to copy in other mac.
hv done that almost weekly since iwork came out. There were no problems before.
Are the pndrives in fault?
Thanks for your help.
Rgds
lorenzo -
Showing Keyfigures error for result and overall result in the Query output
Hi All,
when executing query results show correct figures for qty & value but with ERROR instead of uom(Unit of Measurement) & currency;
Can anybody help?
Rgds,
C.V.Hi There,
Try checking that the particular UOM and currency u are reporting is loaded into BW or not.
hope it helps,
Regards,
Parth. -
Colective Settlement and "CLSD"Status for Production and Maintenance Orders
Hi dear experts,
Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
Thanks in advance,
Lígia MoreiraHi,
You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
Regards,
Eli -
User status for Notification and Work order
We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi -
Music app shows unknown artist for compilation albums
I just submitted a bug report to Apple, though I can't believe I am the only person with this issue.
Since iOS7 (I am currently on iOS7.0.4) I have noticed that the music app (along with many many other issues) will no longer display the artist for compilation albums that I have. In iTunes the artist on the compilation is clearly defined but in iOS7 the Music app simply states "unknown artist".
Surely I am not the only one with this issue?I am very annoyed by this bug too, I have a lot of compilation albums and soundtracks with lots of differents artists, and my library is super organized in iTunes, with the “Album artist” field empty and the “Part of a compilation” checkbox enabled, and it shows the compilations as a “Various Artists” album.
But when I tried to download through iTunes Match in my iPhone 5C some few songs from those albums today, I found out that the music app has this bug that makes almost all of the compilation albums appear within this “UNKNOWN ARTIST” category under the artists tab.
It is very annoying and I hope Apple fixes this, cuz it is driving me crazy. -
How to show the status for all CPU? Solaris 9 & 10 can support how many CPU
Hi, may i know wat is the command to show all of the CPU status? i tried use "top" command, but could show all. Any Idea?
And somemore, may I know Solaris 9 and 10 can support how many CPUs?
thanks
regards
raymondWhat do you mean all of the CPU status?
top shows you processes on all processors and for the currently running processes, it shows you which CPU a process is on.
If you want separate stats for each processor, "mpstat 5" shows cpu usage and idle etc.
As far as how many CPU's solaris supports.
The largest machine Sun sells as far as I am aware is a E25K with 72 dual core CPU's
for 144 cores. Is that big enough for you? You probably don't want to know the price though :-). -
Acpi is showing wrong status of battery and ADP.
First of all i've to say that i'm very sorry for my english
i'm in trouble with my ADP of my laptop. When i start the computer with the ADP plugged in, acpi showes me my battery is charging. Now i unplug ADP and its still saying that my battery is charging. Same story with not changing status discharging, when the ADP is unplugged during boot.
i found some threats which shared my problem, but i haven't found any solution.
here is some stuff wich cloud be interessting:
%acpi -v
acpi 1.7
%cd /tmp
%lsmod > 1
# unplugged adp
%lsmod > 2
%diff 1 2
# no output
#APD plugged in
%cat /sys/class/power_supply/ADP1/uevent
POWER_SUPPLY_NAME=ADP1
POWER_SUPPLY_ONLINE=1
%acpi -b -a
Battery 0: Charging, 99%, 00:08:01 until charged
Adapter 0: on-line
%cat /sys/class/power_supply/BAT1/uevent
POWER_SUPPLY_NAME=BAT1
POWER_SUPPLY_STATUS=Charging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CYCLE_COUNT=0
POWER_SUPPLY_VOLTAGE_MIN_DESIGN=7400000
POWER_SUPPLY_VOLTAGE_NOW=8090000
POWER_SUPPLY_CURRENT_NOW=375000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6100000
POWER_SUPPLY_CHARGE_FULL=4600000
POWER_SUPPLY_CHARGE_NOW=4554000
POWER_SUPPLY_CAPACITY=99
POWER_SUPPLY_MODEL_NAME=
POWER_SUPPLY_MANUFACTURER=SAMSUNG Electronics
POWER_SUPPLY_SERIAL_NUMBER=
#ADP plugged out
%cat /sys/class/power_supply/ADP1/uevent
POWER_SUPPLY_NAME=ADP1
POWER_SUPPLY_ONLINE=0
%acpi -b -a
Battery 0: Charging, 99%, 03:04:00 until charged
Adapter 0: off-line
%cat /sys/class/power_supply/BAT1/uevent
POWER_SUPPLY_NAME=BAT1
POWER_SUPPLY_STATUS=Charging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CYCLE_COUNT=0
POWER_SUPPLY_VOLTAGE_MIN_DESIGN=7400000
POWER_SUPPLY_VOLTAGE_NOW=8198000
POWER_SUPPLY_CURRENT_NOW=376000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6100000
POWER_SUPPLY_CHARGE_FULL=4600000
POWER_SUPPLY_CHARGE_NOW=4554000
POWER_SUPPLY_CAPACITY=99
POWER_SUPPLY_MODEL_NAME=
POWER_SUPPLY_MANUFACTURER=SAMSUNG Electronics
POWER_SUPPLY_SERIAL_NUMBER=
i know, some people would be glad when their computer would charge without any ADP
i'm happy with any help and some text correctionhi there Naveenlndian
this is not a fault your battery needs to be replaced, to keep the life of your battery for longer take it out when you have the laptop plug in or it will kill your battery. if you have your battery in and the laptop plug in as well wot happens is wen the battery is full your laptop will switch it self from manes power to battery ther for using the battery till it need to charged agen. then it will switch back to manes and charge it agen. this is a constant circle so the more it dus it the power is lost from the battery. so the best way to keep your battery life for aslong as poss is to charge it, take it out then leave it out till you dont have access to a plug socket. the only problem with this is if you have a power outage wile your plug in to the manes and no battery your laptop will just go off as there will be no battery in your laptop.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ "Have you tried turning it off and on again?" "and is it definitely plug in" -
I downloaded the latest version of ios for my iPod Touch (v5.1.1) and my music, videos, books, and purchased apps don't appear. In the settings it shows I've only got 9.1 GB of space available out of 28.4 GB (my iPod is a 32 GB). Also, on the iTunes summary page for my iPod the usage bar at the lower portion of the page is all yellow showing 'other' when it use to be multi-color showing what content (apps, video, music, etc) was using up the capacity individually. When I click on the device icon (left side of the window) it indicates all of my music, apps, video, books, etc are on the iPod but they don't show up on the actual device. Also, the sync button (lower right on the summary page) is "greyed out" and won't let me sync. Thanks in advance. Terry
An "other" that large usually indicates that the "other" included corrupted files. Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Backing up, updating, and restoring iOS software -
Balance Sheet not showing correct sign for Liability and Equity
Hai,
I am using SAP PL 40,
In SAP Balance sheet Report,
Liability Ledgers and Equity Ledgers is not showing correct sign. i mean,
In my Liability Ledger the value is
INR-10000.
In Balance sheet it showing
INR1000.
And also, is it possible to bring Dr and Cr column in Balance Sheet?
Now, it's coming in single Column.
Please help me out.
Regards,
Thanga Raj.K
09710445987Hi
It's the system definition that under Standard Balance Sheet Report, the
Liabilities are displayed with POSITIVE SIGN although we know that the
balance for those liabilities accounts are negative. The reason for it
is that the liabilities accounts are defined as Passive Account, so when
the balance is negative, it's displayed with positive sign. And when
the balance is positive, it is displayed with negative sign. The
definition is mainly for the purpose of the reporting. In most of the
localizations, the financial reports supplied by the business should
display Liability and Equity with positive sign.
If you really want to display them in negative sign , you can define a
customized report template in Financials->Financial Report Templates->
and select all liabilities and tick the box in front of 'Reversal Sign'.
Regards,
Syn Qin
SAP Business One Forums Team
Edited by: Syn Qin on Aug 22, 2008 8:49 AM
Maybe you are looking for
-
ATV2 no longer connects to the iTunes store
My ATV2 no longer connects to the iTunes store, however, it used to work without any problems at all. Please help!
-
I'm running an iMac with OS X 10.9.4. Ever since this upgrade was installed I have not been able to scan from my Epson Artisan 800 over the network. I can install the printer with it's IP and it shows up and prints just fine but the scanning utility
-
Hi there, I need to do a simple thing with a JTree but I 've got a problem. Well I want to create a very very very simple bookmark function. I have a tree with the children and I want to add new children which are going to work like link for my progr
-
I am assuming that the best way to do this is to make my current program, the one I want to convert to an executable, a sub vi, and create a new program that places the vi in some kind of loop started by a start button or something. But isn't that ju
-
Passing values to drop down box
hi, I have enhanced an infotype with z - field as drop down. how to pass the values to it