Workflow approval error

Hi xperts
We have migrated MDM from maxdb/linux to orac/windows landscape with new version sp6(before sp5),
The workflow,was working before,
Now i am testing in new environment,workflow which includes,start,process,validation,approval,assignment,syndication,stop as flow,
Workflow is through error in approval stage,"Failed to find approval result for user",
What do you think would be problem
Any clue would be helpful,
Thnks
AMOL

Hi Amole,
Is the WF reaching the Approver step in the WF?
What exactly the Approver can view on receiving the WF task?
I can think of 2 possibilities:
- Firstly the previous step has encountered some problem as a result the task is not received correctly by the Approver step
- The Approver step is not coorectly configured.
Try login in as the WF owner and try monitoring and performing the entire flow once to check if the WF is correctly moving from one step to the next.
Also check the WF design in Visio for all steps.
Thanks &  regards
Simona

Similar Messages

  • Workflow Approval - Error Msg

    Hi
    As I am new to workflow, please clarify the below
    The Purchase order workflow is sending a mailer notification to recipients, when the recipients Clicks the Approve button from the mailer notification, getting the below message in his mail box
    From : System Administrator
    To : oradevt@xxx
    Sent : Timestamp
    Subject : Undeliverable: <Subject of the mailer notification>
    Your message did not reach some or all of the intended recipients.
    Subject : <Subject of the mailer notification>
    Sent : timestamp
    The following recipient(s) could not be reached:
    The e-mail system was unable to deliver the message, but did not report a specific reason. Check the address and try again. If it still fails, contact your system administrator.
    < <mail.xxx.com.sg # 5.0.0 smtp; 5.1.2 - Bad destination host 'DNS Hard Error looking up ....(MX): NX Domain' (delivery attempts:0,)>
    can you please guide me in fixing this issues.
    Regards
    Yram

    Hi
    <u>It comes from OSS Note -></u>
    <b>Note 983128 - Approval WF Fragment Has No User Assignment</b>
    <b>In BADI BBP_CHNG_AGNT_GET we were setting the agent assignment to 'X' instead of 'G' (general task).</b>
    <b>Also, Try this. Assign agent for task TS10008126. Don't forget to generate it.</b>
    If all your task are classified as general, this is a bug in a FM (SRM5, SP4). No idea if a note exist for this but check source of function BBP_PDH_WFL_APP_ASSIGNTYPE_GET, the task type (WF, TS) is hard coded, you may want to change it )
    FUNCTION bbp_pdh_wfl_app_assigntype_get.
    *"*"Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(IV_TASK) TYPE SWD_STEP_T OPTIONAL
    *" EXPORTING
    *" VALUE(EV_ASSIGNMENT) TYPE CHAR1
    *" TABLES
    *" ET_POSSIBLE_AGENTS STRUCTURE SWHACTOR OPTIONAL
    DATA:
    lv_general_task LIKE p1217-general,
    lt_related_agents TYPE swhactor OCCURS 0 WITH HEADER LINE,
    lv_task TYPE swd_step_t.
    *{ INSERT DE2K901025 1
    *PVA correction
    data: lv_otype type OTYPE.
    lv_otype = iv_task(2).
    *} INSERT
    lv_task = iv_task+2.
    * evaluate the agent assignment of the whole workflow fragment
    CALL FUNCTION 'RH_TASK_AGENTS_INDEX'
    EXPORTING
    *{ REPLACE DE2K901025 2
    * task_otype = 'WS'
    *PVA correction
    task_otype = lv_otype
    *} REPLACE
    task_objid = lv_task "workflow fragment
    IMPORTING
    act_general = lv_general_task
    TABLES
    related_agents = et_possible_agents
    EXCEPTIONS
    no_active_plvar = 1
    no_agents_of_task_found = 2
    no_task_otype = 3
    OTHERS = 4.
    <u><b>See related link -></b>
    Re: After Add Approver by Approver Preview
    Agent assignment does not exist
    Unable to change shopping cart approvers - workflow
    SRM 5.0 Approval WF fragment has no user assignment</u>
    <i>If this does not help in your case, report the problem to SAP by creating a new customer OSS message.</i>
    Do let me know.
    Regards
    - Atul

  • Error Workflow System:error on approving Requisition

    Hi,
    DB:11.1.0.7
    R12.1.1
    OS:Linux 86x64 Red Hat Linux
    We are receiving Error Workflow System:error on approving Requisition?
    Could anyone please share the resolution on it if faced before?
    Thanks for your time!
    Regards,

    Hi
    I see the below error in log.
         Abort          Resolved          Retry          Reassign          Request Information     
    To          SYSADMIN
    Sent          20-Apr-2011 13:15:54
    ID          5008
         An Error occurred in the following Workflow.
    Item Type = POAPPRV
    Item Key = 104-108
    User Key =9
    Error Name = WFENG_ITEM_ATTR
    Error Message = 3103: Attribute 'DOCUMENT_ID' does not exist for item 'POAPPRV/104-108'.
    Error Stack =
    PO_REQAPPROVAL_ACTION.ReserveAutonomous(010)
    PO_REQAPPROVAL_ACTION.ReserveDoc(ReserveDoc 020: Doc Header Id = 104)
    PO_REQAPPROVAL_ACTION.Reserve_Doc(POAPPRV, 104-108, PO_REQAPPROVAL_ACTION.Reserve_Doc: 01)
    Wf_Engine.GetItemAttrNumber(POAPPRV, 104-108, DOCUMENT_ID)
    Wf_Engine_Util.Function_Call(PO_REQAPPROVAL_ACTION.RESERVE_DOC, POAPPRV, 104-108, 229749, RUN)
    Activity Id = 229749
    Activity Label = DOC_RESERVE_PROCESS:RESERVE_DOCUMENT
    Result Code = #EXCEPTION
    Anybody have any idea on this.
    Thanks and Regards,

  • How to call workflow approve service in loop for multiple documents.

    i have created a serviceHandler for approving the document and i post the comma separated dIDs as a string from workflow approval template(custom template). And in serviceHandler program i pass the did for approving and only first document is approved and for other document its throwing error, Its showing error document revision is not a latest revision but document is having only one revision.
    my code is: can anyone help me.
    public void SendAllDocuments()
            throws DataException, ServiceException{
        try{
        String [] ContentDids;
        System.out.println("+++++++here we are the all SendAllDocuments++++++++++++++");
        String workflowIds = m_binder.getLocal("workflowIds");
        if(!workflowIds.isEmpty()){
             ContentDids = workflowIds.split("\\,");
        }else{
            throw new ServiceException("document are not selected from users, workflowIds"+workflowIds);
        int arrayLength = ContentDids.length;
        for(int iterator=0;iterator<=arrayLength-1;iterator++){
            SendDocumentToUserQueue(ContentDids[iterator]);
        }}catch(Exception e){ e.printStackTrace();}
        m_workspace.releaseConnection();
    //DocMeta table varible which are coming from Internal assignment page
    //xWF_SentFrom",xWorkflowStepAlias",xWF_SendTo",xPurposeForSubmission",xPurposeForRejection",xDocApproval",xWorkflowComments"
    //xInternalAssignment",togroup",xWF_SendToSend",xWF_SendToSend12",xPurposeForSubmissionSend",xWF_SendToApprove",wfSendApproveComments"
    //Revision table variable which can get from getRevisionsTableValueFromDid
    // dDocName", dDocType",dRevLabel",dSecurityGroup",dDocAccount"
    public void SendDocumentToUserQueue(String approvalId) throws DataException, ServiceException{
        try{
            DataResultSet resultset =getRevisionsTableValueFromDid(approvalId);
            String sendToName = m_binder.getLocal("sendToName");
            String sender="takuma";
        //String workflowComments = m_binder.getLocal("workflowComments");
        String workflowReason = m_binder.getLocal("workflowReason");
        m_binder.putLocal("IdcService", "WORKFLOW_Approve");
        m_binder.putLocal("idcToken", m_binder.getLocal("idcToken"));
        m_binder.putLocal("dID", approvalId);
        m_binder.putLocal("xWF_SendTo", sendToName);
        m_binder.putLocal("xPurposeForSubmission","108");
        m_binder.putLocal("xWF_SentFrom", sender);
        m_binder.putLocal("xWorkflowStepAlias", "");
        m_binder.putLocal("xPurposeForRejection", "");
        m_binder.putLocal("xDocApproval", "");
        m_binder.putLocal("xWorkflowComments", "");
        m_binder.putLocal("xInternalAssignment", "");
        m_binder.putLocal("xWF_SendToSend", "");
        m_binder.putLocal("dDocName", getData(resultset,"dDocName"));
        m_binder.putLocal("dDocType", getData(resultset,"dDocType"));
        m_binder.putLocal("dRevLabel", getData(resultset,"dRevLabel"));
        m_binder.putLocal("dSecurityGroup", getData(resultset,"dSecurityGroup"));
        m_binder.putLocal("dDocAccount", getData(resultset,"dDocAccount"));
        executeService(m_binder, sender);
    }catch(Exception e){ e.printStackTrace();}
    public DataResultSet getRevisionsTableValueFromDid(String documentId) throws DataException, ServiceException{
        DataResultSet drs = new DataResultSet();
        try{
            /*String sqlDocType="select dDocType from revisions where dId ='"+documentId+"'";
        ResultSet documentRset = getSystemWorkspace().createResultSetSQL(sqlDocType);
        //handle null pointer exception for DocumentValue
        String DocumentValue = ResultSetUtils.getValue(documentRset, "dDocType");*/
        String sql="select dDocName,dDocType,dRevLabel,dSecurityGroup,dDocAccount from Revisions where dId ='"+documentId+"'";
        ResultSet rset = getSystemWorkspace().createResultSetSQL(sql);
        if (rset == null || rset.isEmpty()) {
            SystemUtils
                    .info("Resultset is null please check database query and Did ="+documentId);
        drs.copy(rset);
        catch(Exception e){
            System.out.println("in catch of getRevisionId Method");
            e.printStackTrace();}
        //handle null pointer exception for DocumentValue       
        return drs;       
    public String getData(DataResultSet dataSet, String value) {
        String fieldValue = "";
        fieldValue = ResultSetUtils.getValue(dataSet, value);
        System.out.println(fieldValue+"value is null in getData Method=======");
        return fieldValue;
    public UserData getFullUserData(String userName, ExecutionContext cxt,
            Workspace ws) throws DataException, ServiceException {
        if (ws == null)
            ws = getSystemWorkspace();
        UserData userData = UserStorage.retrieveUserDatabaseProfileDataFull(
                userName, ws, null, cxt, true, true);
        //ws.releaseConnection();
        return userData;
    public Workspace getSystemWorkspace() {
        Workspace workspace = null;
        Provider wsProvider = Providers.getProvider("SystemDatabase");
        if (wsProvider != null)
            workspace = (Workspace) wsProvider.getProvider();
        return workspace;
    public void executeService(DataBinder binder, String userName)
            throws DataException, ServiceException {
        // obtain a connection to the database
        Workspace workspace = getSystemWorkspace();
        // check for an IdcService value
        String cmd = binder.getLocal("IdcService");
        if (cmd == null)
            throw new DataException("!csIdcServiceMissing");
        // obtain the service definition
        ServiceData serviceData = ServiceManager.getFullService(cmd);
        if (serviceData == null)
            throw new DataException(LocaleUtils.encodeMessage(
                    "!csNoServiceDefined", null, cmd));
        // create the service object for this service
        Service service = ServiceManager.createService(serviceData.m_classID,
                workspace, null, binder, serviceData);
        // obtain the full user data for this user
        UserData fullUserData = getFullUserData(userName, service, workspace);
        service.setUserData(fullUserData);
        // binder.m_environment.put("REMOTE_USER", userName);
        ServiceException error = null;
        try {
            // init the service to not send HTML back
            service.setSendFlags(true, true);
            // create all the ServiceHandlers and implementors
            service.initDelegatedObjects();
            // do a security check
            service.globalSecurityCheck();
            // prepare for the service
            service.preActions();
            // execute the service
            service.doActions();
            // doany cleanup
            service.postActions();
            // store any new personalization data
            service.updateSubjectInformation(true);
            service.updateTopicInformation(binder);
        } catch (ServiceException e) {
            varTrueFalse = false;
            error = e;
            SystemUtils.info("exception in second location=" + e);
            e.printStackTrace();
        } finally {
            // Remove all the temp files.       
            service.cleanUp(true);       
        // handle any error
        if (error != null) {
            error.printStackTrace();
            if (binder.getLocal("StatusCode") == null) {
                binder.putLocal("StatusCode", String.valueOf(error.m_errorCode));
                binder.putLocal("StatusMessage", error.getMessage());
            } else {
                throw new ServiceException(error.m_errorCode,
                        error.getMessage());

    I guess it is caused by the fact that some of variables in the binder refer to the first workflow item. My bet would be dDocName.
    Try to find out what's in the binder if you approve the second item from GUI and what's there when you do it from your program. That should give you enough info what you need to change.

  • Some Users cannot Open Workflow Approval Task

    We have a SPD workflow published to our production site and it includes a 'Start Approval Process' task which involves a number of users (determined by a lookup to another list) this worked brilliantly until we republished the workflow with some minor changes,
    none of which were to this particular approval task. Now we are seeing some strange behaviours. When some users click the task to approve they are seeing 'This from cannot be opened in a browser, To open this form use Microsoft Infopath'. Now strangely it's
    only certain users, if you're a site collection admin you never have this error. So if a user previously had the error and i then add them to the site collection administrators list the error goes away and they can complete the task.
    Obviously not a solution! giving users full control permissions on the task list or task item doesnt fix the error either. The same workflow on our UAT works without any issues. The task forms in SPD have not been customised either. Its a SP2010 Standard
    farm with no infopath services obviously. Bizarrely there are some users with only Contribute rights to the task list who can open approve tasks, so it's looking like a permissions issue to me but I'm at a loss to find a fix. I've tried totally removing
    the worklows and republishing, regenerating the .xsn task forms in SPD by deleting them and republishing, removing and re-adding the task related content types to site, Changing the Approval Task settings 'only allow users to edit their tasks...' to false
    and then back to true, the works, but to no avail.
    Anybody any ideas?
    TIA
    Chris

    Hi,
    According to your post, my understanding is that Some Users cannot Open Workflow Approval Task.
    I recommend that you can create a new list and workflow to check whether it works.
    Then use the user who get the error to open task.
    If he can open the task in the brower, the issue is related to the older list.
    Then you can use the new created list and assgin the task.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/en-US/67dc8577-f248-4d6c-bb82-3aca0f084d24/this-form-cannot-be-opened-in-a-web-browser-error-not-an-infopath-form?forum=sharepointcustomizationprevious
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • What is order against workflow approval ?

    what is order against workflow approval ?
    How to configure ?
    Thanking you.
    Regards,
    Subash

    Hi there,
    I am not sure if it is necessarily a bug, but its a matter of understanding all of the settings needed. I had the same problems for a while but after a fair bit of trial and error have found some workable settings.
    It probably has more to do with the export settings rather than what viewer options have selected (I don't think that viewer settings affect your export).
    What program are you using to export?
    I am using compressor to export with aspect ration set to automatic 16:9. Then use DVDSP with the track set to 16:9 letterbox, it seems to export to DVD with the correct aspect ratio that way.
    I am having trouble with the image strobing, looks like some kind of interlacing problem, but at least I have got it in the right aspect ratio.
    Its typical video, solve one problem and it just creates another.
    I am yet to find the absolute best workflow.
    In response to Andy above, the original letterboxed footage probably did have something to do with the downconverting settings on the camera, as when I import without downconverting it does not letterbox. In the HDR-HC1 there is an option in the menu called "TV Type" with options of 4:3 or 16:9. I was reviewing my footage on a 4:3 television so I most likely had it set to 4:3 which created the letterboxing in the viewer when I then imported the footage.
    Importing the footage in HDV solves the issue of aspect ratio, but creates a new problem with the image strobing.
    I hope this was some kind of help to you.
    Liam

  • How to use a pwa group in CREATE A TASK PROCESS in SPD 2013 for project server workflow approval process

    I am working on a Project Server 2013 workflow. I am creating this using Sharepoint Designer 2013. In this workflow I am using approval process at one stage. I have created a security group SalesManagers in PWA. I want to use this group for workflow approval
    process. I want all users of this group get approval tasks. 
    For this I used START A TASK PROCESS activity in the SP Designer. I clicked on
    this user and created task process. But here I could not find SalesManager group which I created in PWA. I was only able to find the users. I can also see
    Administrators for PWA . But couldnot find SalesManager or any other security group created in pwa.
    Can anyone suggest how I can get the security group created in pwa.

    NBDevelopment,
    I believe SPD only recognizes the SharePoint Groups and not the project server security groups.
    The Administrators for PWA, and few other groups like Project Managers for PWA etc., are synced SharePoint Groups with the security groups, which is why they show up in SPD.
    You could create a SharePoint Group for the Sales Managers group and use that in SPD.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Custom Workflow Load Error in Power Center error code 36331

    Hi,
    I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
    I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
    Version 9.0.1
    When i run a load i am getting the error code 36331.
    And the Workflow Log shows the below:
    *ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
    The DAC log file is as follows
    *3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
    *=====================================*
    STD OUTPUT
    *=====================================*
    Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Tue Feb 05 17:23:28 2013
    *Connected to Integration Service: [BIAIS].*
    *Integration Service status: [Running]*
    *Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
    *Integration Service current time: [Tue Feb 05 17:23:29 2013]*
    *Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
    *Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
    *Workflow run status: [Failed]*
    Workflow run error code: [36331]
    *Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
    Workflow run id [1052].
    *Start time: [Tue Feb 05 17:23:08 2013]*
    *End time: [Tue Feb 05 17:23:13 2013]*
    *Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
    *Workflow run type: [User request]*
    *Run workflow as user: [Administrator]*
    Run workflow with Impersonated OSProfile in domain: []
    *Integration Service: [BIAIS]*
    Disconnecting from Integration Service
    Completed at Tue Feb 05 17:23:29 2013
    *=====================================*
    ERROR OUTPUT
    *=====================================*
    *3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
    Status Desc : Failed
    WorkFlowMessage :
    *=====================================*
    STD OUTPUT
    *=====================================*
    Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Tue Feb 05 17:23:28 2013
    *Connected to Integration Service: [BIAIS].*
    *Integration Service status: [Running]*
    *Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
    *Integration Service current time: [Tue Feb 05 17:23:29 2013]*
    *Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
    *Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
    *Workflow run status: [Failed]*
    Workflow run error code: [36331]
    *Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
    Workflow run id [1052].
    *Start time: [Tue Feb 05 17:23:08 2013]*
    *End time: [Tue Feb 05 17:23:13 2013]*
    *Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
    *Workflow run type: [User request]*
    *Run workflow as user: [Administrator]*
    Run workflow with Impersonated OSProfile in domain: []
    *Integration Service: [BIAIS]*
    Disconnecting from Integration Service
    Completed at Tue Feb 05 17:23:29 2013
    *=====================================*
    ERROR OUTPUT
    *=====================================*
    Error Message : Unknown reason for error code 36331
    ErrorCode : 36331
    *3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
    *3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
    Status Desc : Failed
    WorkFlowMessage :
    *=====================================*
    STD OUTPUT
    *=====================================*
    Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Tue Feb 05 17:23:28 2013
    *Connected to Integration Service: [BIAIS].*
    *Integration Service status: [Running]*
    *Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
    *Integration Service current time: [Tue Feb 05 17:23:29 2013]*
    *Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
    *Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
    *Workflow run status: [Failed]*
    Workflow run error code: [36331]
    *Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
    Workflow run id [1052].
    *Start time: [Tue Feb 05 17:23:08 2013]*
    *End time: [Tue Feb 05 17:23:13 2013]*
    *Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
    *Workflow run type: [User request]*
    *Run workflow as user: [Administrator]*
    Run workflow with Impersonated OSProfile in domain: []
    *Integration Service: [BIAIS]*
    Disconnecting from Integration Service
    Completed at Tue Feb 05 17:23:29 2013
    *=====================================*
    ERROR OUTPUT
    *=====================================*
    Error Message : Unknown reason for error code 36331
    ErrorCode : 36331
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
    I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
    Many thanks for any help in advance.

    Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
    is Commands executed :
    pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
    If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
    Was Execution Plan built before Starting it.
    Let me know if this helped.
    Regards,
    Jay

  • Reminder mail for workflow approval

    Hi All,
    We have a scheduled task which sends Reminder mails for workflow approval which has been pending for more than 5 days.
    Recently I created new workflow definitions and reminder task stopped sending mails.
    I checked task and it has IapiTaskIfc Class com.frictionless.custom.wkfreminder.sendWorkflowReminder.
    How to check this class and do i need to make changes somewhere else to send reminder mails?
    Regards,
    Prabhat

    Hi Prabhat,
    I am working on creating a scheduled task for sending reminder emails. I need help on IapiTaskIfc Class com.frictionless.custom.wkfreminder.sendWorkflowReminder. Can you please share sendWorkflowReminder class to me, so that I can get idea about the code written for sending reminder emails? It would be great help.
    To check the class, you need to get the jar from server and decompile it. You can get some idea by looking at the java class file then.
    Thanks,
    Saloni

  • DAC Workflow run error code: [36331]

    Dear all ,
    I want to Integrate OBIEE with Oracle R12.1.1
    Initially I have defined new container & Phyiscal Data Sources in DAC
    Datawarehouse Test Connection Successful
    ORA_R1211 Test Connection Successful
    FlatFile Connection ?
    After that I created new Plan & generate the parameter and also built it successfully but when I run that execution plan it give error.
    Please any one can help me regarding this issue.
    also provide me step by step document to integrate OBIEE with Oracle R12.1.1
    Regards,
    Yasir

    Kindly See the log of last ETL run........
    494 SEVERE Wed Dec 08 18:11:04 GMT+05:00 2010
    START OF ETL
    495 SEVERE Wed Dec 08 18:11:45 GMT+05:00 2010 Starting ETL Process.
    496 SEVERE Wed Dec 08 18:11:50 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
    497 SEVERE Wed Dec 08 18:12:12 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    498 SEVERE Wed Dec 08 18:12:22 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
    499 SEVERE Wed Dec 08 18:12:44 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    500 SEVERE Wed Dec 08 18:13:04 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
    501 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
    502 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
    503 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
    504 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
    505 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
    506 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
    507 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
    508 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
    509 SEVERE Wed Dec 08 18:13:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
    510 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    511 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    512 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    513 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
    514 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
    515 SEVERE Wed Dec 08 18:14:23 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    516 SEVERE Wed Dec 08 18:14:30 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    517 SEVERE Wed Dec 08 18:14:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    518 SEVERE Wed Dec 08 18:14:38 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    519 SEVERE Wed Dec 08 18:14:42 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    520 SEVERE Wed Dec 08 18:14:43 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
    521 SEVERE Wed Dec 08 18:14:49 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    522 SEVERE Wed Dec 08 18:14:58 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
    523 SEVERE Wed Dec 08 18:15:05 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
    524 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
    525 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
    526 SEVERE Wed Dec 08 18:15:17 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
    527 SEVERE Wed Dec 08 18:16:04 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    528 SEVERE Wed Dec 08 18:16:16 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    529 SEVERE Wed Dec 08 18:16:17 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    530 SEVERE Wed Dec 08 18:16:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    531 SEVERE Wed Dec 08 18:16:28 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    532 SEVERE Wed Dec 08 18:16:57 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    533 SEVERE Wed Dec 08 18:17:22 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
    534 SEVERE Wed Dec 08 18:17:31 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    535 SEVERE Wed Dec 08 18:17:58 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
    536 SEVERE Wed Dec 08 18:18:21 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    537 SEVERE Wed Dec 08 18:21:36 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    538 SEVERE Wed Dec 08 18:22:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
    539 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap' has completed with error code 0
    540 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Bank_Branch_Name' has completed with error code 0
    541 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Cust_Class' has completed with error code 0
    542 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Uom_Code' has completed with error code 0
    543 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_CostCenter' has completed with error code 0
    544 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
    545 SEVERE Wed Dec 08 18:22:27 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method' has completed with error code 0
    546 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    =====================================
    STD OUTPUT
    =====================================
    Informatica(r) PMCMD, version [8.6.1 HotFix11], build [457.0505], Windows 32-bit
    Copyright (c) Informatica Corporation 1994 - 2010
    All Rights Reserved.
    Invoked at Wed Dec 08 18:23:43 2010
    Connected to Integration Service: [Oracle_BI_DW_Base_Intergration_Service].
    Integration Service status: [Running]
    Integration Service startup time: [Wed Dec 08 17:05:35 2010]
    Integration Service current time: [Wed Dec 08 18:23:46 2010]
    Folder: [SDE_ORAR1211_Adaptor]
    Workflow: [SDE_ORA_CodeDimension_Payterm_Ap] version [1].
    Workflow run status: [Failed]
    Workflow run error code: [36331]
    Workflow run error message: [WARNING: Session task instance [SDE_ORA_CodeDimension_Payterm_Ap] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_Payterm_Ap] will be failed.]
    Workflow run id [103].
    Start time: [Wed Dec 08 18:22:13 2010]
    End time: [Wed Dec 08 18:23:38 2010]
    Workflow log file: [F:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_CodeDimension_Payterm_Ap.log]
    Workflow run type: [User request]
    Run workflow as user: [Administrator]
    Run workflow with Impersonated OSProfile in domain: []
    Integration Service: [Oracle_BI_DW_Base_Intergration_Service]
    Disconnecting from Integration Service
    Completed at Wed Dec 08 18:23:46 2010
    =====================================
    ERROR OUTPUT
    =====================================
    547 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Payterm_Ap
    548 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    =====================================
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    ::: CAUSE :::
    MESSAGE:::Execution of child batch Informatica Session Batch failed.
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:340)
    com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
    com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
    com.siebel.etl.engine.core.Session.run(Session.java:3246)
    java.lang.Thread.run(Thread.java:619)
    954 SEVERE Wed Dec 08 18:31:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    955 SEVERE Wed Dec 08 18:32:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_GLLinkageInformationGeneral_Full.txt SIL_GLLinkageInformationGeneral_Full
    Status Desc : Succeeded
    WorkFlowMessage : Workflow executed successfully.
    Error Message : Successfully completed.
    ErrorCode : 0
    956 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 ETL seems to have completed. Invoking shut down dispatcher after the notification from the last running task.
    957 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Finishing ETL Process.
    958 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 MESSAGE:::Some steps failed.
    EXCEPTION CLASS::: com.siebel.etl.engine.bore.SomeSessionsFailedException
    com.siebel.etl.engine.bore.NewDispatcher.execute(NewDispatcher.java:302)
    com.siebel.etl.engine.bore.NewDispatcher.run(NewDispatcher.java:121)
    java.lang.Thread.run(Thread.java:619)
    959 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Dispatcher thread completed.
    960 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Number of incomplete tasks whose status got updated to stopped :0
    Number of incomplete task details whose status got updated to stopped :2630
    961 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
    *     CLOSING THE CONNECTION POOL DataWarehouse
    962 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
    *     CLOSING THE CONNECTION POOL ORA_R1211
    963 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
    END OF ETL
    --------------------------------------------

  • Workflow approval from mobile in ECC5

    Hi All
      We are already having workflow approval in R/3 where it happening from SAP inbox now my client want to migrate to mobile phone. Its it possible from ECC5 we dont have portal. How to implement it. Do we need to install any 3rd party like sybase or other. The main module is MM and PS and also they should be online always ie latest data should send and should update immediately ie should be syn with R/3. How it can be achieved. And also it should be device independet approval can be happend from iphone or blackbarry. Is any link or note are available to share with our client. Awaiting for your thoughts.
    Regards
    Vijay

    Hi Vijay,
    May be you should check the following WiKi link on SDN.  This might answer some of your questions.
    http://wiki.sdn.sap.com/wiki/display/mobile/SybaseMobileWorkflow
    Hope this helps.
    Best Regards,
    Kranti

  • Workflow mailer error

    Hi ,
    I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again  and found Workflow mailer working fine....I didnt get what happened on this...
    friends, If you have any idea on this, please share

    Pl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer          (Doc ID 463354.1)
    Unable To Start Workflow Notification Mailer          (Doc ID 418329.1)
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues          (Doc ID 753845.1)
    Workflow Mailer Will Not Start Stays In Starting Status          (Doc ID 837893.1)
    Unable To Connect To The Mail Account. Check The Host, User Name And Password          (Doc ID 1123684.1)
    HTH
    Srini

  • Workflow in Error state in SWI1 tx, but still table is updating as usual, weird!!

    Hello,
    We have a custom workflow, z_workflow.
    In this z_workflow, its calling a custom FM, z_fm.
    In this z_fm, I'm updating a custom tbale, z_table.
    Before writing UPDATE z_table, I am locking this z_table by using 'ENQUEUE_E_TABLE', as below,
    Pls. note this workflow is triggering in BACK GROUND by WF-BATCH user
    CALL FUNCTION 'ENQUEUE_E_TABLE'
                      EXPORTING
                        mode_rstable   = 'E'
                        tabname        = 'Z_TABLE'
                      EXCEPTIONS
                        foreign_lock   = 1
                        system_failure = 2
                        OTHERS         = 3.
                    IF sy-subrc = 0.
                      UPDATE z_table
                       SET matnr = ls_mara-matnr
                              descr = lv_text
                        WHERE ref_id = ref_id.
                      CALL FUNCTION 'DEQUEUE_E_TABLE'
                        EXPORTING
                          mode_rstable = 'E'
                          tabname      = 'Z_TABLE'.
                     ELSE.
                         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. =====>
    ==> If the lock is failing an an ERROR / 'E' type message is occuring, but still the 'Rest of the code blocks' are executing normally (where in 2nd_z_table is updating), but the workflow is ending up in 'Error state' in SWI1 (workflow log) transaction, our users who are monitoring this workflow thinking that the transaction went bad, but again they noticed that the 2nd_z_table is updating as usual!!                         
                    ENDIF.
                    Rest of the code blocks ==> here another custom tbl, 2nd_z_table is updating
    Our workflow expert said that, the error is occuring, well, but as its (z_fm) calling from / by back ground workflow user, hence the 'Rest of the code blocks' are triggering normally and the 2nd_z_table is updating as usual, but overall the workflow ends up in error state!
    To avoide this confusing situation (workflow in error, but rest of the code blocks are executing normally), workflow expert suggested the below approach (raising of EXCEPTION in z_fm instead of ERROR message), pls. suggest me is it OK / safe / works good for me?
    DO 10 TIMES. => Workflow expert asking me to add all these blue lines to my code
                    CALL FUNCTION 'ENQUEUE_E_TABLE'
                      EXPORTING
                        mode_rstable   = 'E'
                        tabname        = 'Z_TABLE'
                      EXCEPTIONS
                        foreign_lock   = 1
                        system_failure = 2
                        OTHERS         = 3.
                    IF sy-subrc = 0.
                      UPDATE z_table
                       SET matnr = ls_mara-matnr
                              descr = lv_text
                        WHERE ref_id = ref_id.
                      CALL FUNCTION 'DEQUEUE_E_TABLE'
                        EXPORTING
                          mode_rstable = 'E'
                          tabname      = 'Z_TABLE'.
                      CLEAR lv_locking_failed_on_z_table.
                      EXIT.
                    ELSE.
                      WAIT UP TO 1 SECONDS.
                      lv_locking_failed_on_z_table = abap_true.
                    ENDIF.
                  ENDDO.
                  IF lv_locking_failed_on_z_table IS NOT INITIAL.
                    RAISE exception_lock_failed.  ===> Does the Raising EXCEPTION is solve my problem? pls. suggest me
                    RETURN.
                  ENDIF.
    workflow expert said with this raising of exception will not trigger 'Rest of the code blocks' so that user will be not confused
    Thank you

    Hi "3SAP"
    Yes, your WF guy is correct - raising exception will stall the workflow and not execute to the second table update.
    Moreover, second table update logic should be kept inside of the SY-SUBRC = 0 of locking on FIRST TABLE update.
    In current case, I cannot say for sure that second table is getting updated in the same call because as soon as TYPE 'E' message is triggered in a background step, standard exception is triggered in the workflow runtime to stop execution - which will NOT execute the code after MESSAGE statement.
    As mentioned by Mike, the second table may have been updated from another instance/session/etc but from not this one.
    Regards,
    Modak

  • Self Registration without Company or Workflow approval

    Hello,
    We have NW2004s SP 10.  Is it possible to allow a very simple self registration without using Companies or Workflow approval?  The online help seems to imply that this is possible, but I've tried to configure our Portal as such but nothing shows up on our welcome page. 
    What I've done is the following:
    User Admin UI settings:
    Enable Self-Registration of Guest Users=true
    Display Contact Information Form During Self-Registration = true
    All the rest are set to false/blank or default
    Visual Admin settings:
    Server ->Service -> UME Provider -> ume.logon.selfreg = true
    Thanks,
    T

    You also need to assign the UME Action UME.Selfregister_User to the Everyone group. Use /useradmin to create a UME role called something useful and add the UME action specified.
    Now grant that role to the Everyone group.
    Cheers

  • Redirection not working as expected after workflow approval

    Hi,
    We are migrating our application from Stellent 7.1 to WCC 11g and finding a strange issue in 11g with respect to a functionality that is working perfectly in 7.1.
    We have two services for workflow approval. If the approval is happening from the QA workflow, the service being called is WORKFLOW_APPROVE_SUBMIT_QA and if it is happening from other workflows, the service being called is WORKFLOW_APPROVE_SUBMIT.
    The actions for these two services are the same except the prepareRedirect action as given below:
    1. WORKFLOW_APPROVE_SUBMIT redirects to IdcService=GET_PORTAL_PAGE&Action=GetTemplatePage&Page=WF_INQUEUE_LIST, which displays the workflow assignments for the user from all workflows.
    3:prepareRedirect:IdcService=GET_PORTAL_PAGE&Action=GetTemplatePage&Page=WF_INQUEUE_LIST
    2. WORKFLOW_APPROVE_SUBMIT_QA redirects to IdcService=QA_WORKFLOW_LIST (a custom service written that will display the contents in the user's queue from the QA workflow)
    3:prepareRedirect:IdcService=QA_WORKFLOW_LIST::null
    For WORKFLOW_APPROVE_SUBMIT service, the redirection is happening as expected.
    But, WORKFLOW_APPROVE_SUBMIT_QA service is redirecting to IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME_PAGE instead of the specified redirect.
    We tried changing the redirect action for the service WORKFLOW_APPROVE_SUBMIT_QA to IdcService=GET_PORTAL_PAGE&Action=GetTemplatePage&Page=WF_INQUEUE_LIST, but still it is redirecting to the HOME_PAGE.
    Highly appreciate any solution for this issue or any suggestions on the possible cause.
    Thanks,
    Manjusha

    I have version 33.0.1 and i still have this problem, any other help ? Thanks!

Maybe you are looking for

  • Can Adobe Acrobat Pro 9 function as a previewer in windows folders?

    I use Adobe Acrobat Pro 9 and want my .pdf files to only open with adobe pro, I also want to have a previewer option in file folders. With adobe pro 9 only on my machine I do not have the previewer capabilities and when I download abobe reader that p

  • BPEL process is not displaying in BPEL Console

    Hi We are deploying the process through jDeveloper to BPEL PM, we have around 100 process are successfully deployed. Once i restart the OPMN by giving OPMNCTL STOPALL and OPMNCTL STARTALL. The process are not displaying. Once restart the whole server

  • Changing images for print version

    Is there a way to change an image for a print version? My background is dark blue and my image is white, however if I print this nothing will show because its white on white. I want to use a different image that is dark blue for the print version so

  • Mvt. 101 with ML81N for service entry sheet split for every service line

    Dear guru. I have one purchase order position for service (item category D)  with three different service line. I run ML81N and i create the service entry sheet for every service line. If I see the goods receipts movement generate , the system show 1

  • Mac book pro 13 nuovo di un mese, non funziona la track pad e il puntatore resta fermo

    Appena acceso il puntatore era rimasto fisso sulla meletta in alto a sinistra, ovvero dove l'ho lasciato prima di spegnerlo l'ultima volta. Il track pad non risponde, nè lo scorrimento nè il tasto. Se attacco un mouse con usb il puntatore funziona. C