Workflow Aproval - Non standard (Problem in the Worklist - bbpbwsp)

Helo,
I have build one approval workflow to the process bid invatation. In this workflow i have one task (non-standard) where the user can approve de process.
The client use de ITS SRM, the worklist used is the BBPBWSP.
When the Workflow start, the approval task appears in the worklist, but when i execute this task, it is open initial menu SAP. Not using our service Z.... instead /scripts/BBPAPPROVAL/...
Can anyone help me?

Hi
I know the ITS Debugging makes quite a life easy for some of the cases, like this.
By the way, which SRM version are you using ?
Anyways, will give you details, how to enable the ITS debugger in your system. Ask your BASIS person to help you out in this case.
Note 451292 - How to use ITS debugger
Note 304371 - RFC debugging set in service file BBPUSERMAINT
Note 392570 - EBP: Required data on the problem processing
Note 893425 - MIME type with attachments
Note 954135 - Instructions for debugging workflow activities
Note 903200 - Workflow tracing for problem detection
Note 995328 - Extended System Status Information for SAP SRM
Hope this will help.
Please reward suitable points, incase it suits your requirement.
Regards
- Atul

Similar Messages

Running the BO servers on non standard ports XIR2

Hi all,
I need to know how to get the bo servers to register with the cms when it is running on a non-standard port. The port I'm using is 6409, so I have tried adding -port 6409 to the command line string, but that didn't work.
I'm running two instanceson BO on the box hence the need for non standard ports.
Any thoughts?
TIA,
Jeff

-port switch is the correct way to accomplish this.
So your CMS will have -port 6409, the rest of servers will have -ns cmsname:6409 in their comand line.
You might want to look at adding -requestport switches as well....
Please review Admin guide for more details on usage of those switches.

Can't find CC when install to non-standard location

When I installed Sun Studio Express February 2007 to a non-standard location via the installer program, upon start of the IDE, it says it can't find the CC program. I have set my path properly.
I fixed this problem by just mounting: mount -F lofs /export/sunstudio/SUNWspro /opt/SUNWspro and restarting the IDE (after updating my paths to /opt/SUNWspro/bin of course)

This is weird, I have Sun Studio EA installed in /opt/12 and it has no problem locating compilers... The only difference is that I didn't use installer, I downloaded a .tar file.

Non-standard keys

Hi,
How can I respond to input from non-standard keys, like the forward and back keys on some keyboards? I've tried using the KeyEventDemo, but it doesn't record any events. Any ideas?
Thanks.

Try this:
KeyboardFocusManager.getCurrentKeyboardFocusManager().addKeyEventDispatcher(
        new KeyEventDispatcher() {
            public boolean dispatchKeyEvent(KeyEvent e) {
                System.out.println(e.getKeyCode());
                return false;
});It will detect all keyevents and print the correpsonding keycode. If this code does not react when you press those arrow keys, then you cannot detect them using pure java.

Cisco Secure ACS 5.6 Backup to FTP server listening on non-standard ports

When defining a software repository from CLI or GUI, I have not been able to define the custom port that our FTP server is listening on. Does ACS support the use of custom ports for FTP?

Hi Anthony,
I don't thing so it will support non-standard ports as the options are only Disk,FTP,SFTP,TFTP and NFS.
Regards,
Chris

How can a non-standard calendar week be defined?

I have a requirement to determine the calendar week when the week is non-standard week.
The standard calendar week is Sunday - Saturday.
Our week is defined as Saturday - Friday. We need to detrmine the calendar week of the year based on a Saturday - Friday Calendar week.
How can I calculate the calendar week year based on this definition?
You assistance is appreciated.
Den

You can use transaction SCAL to change or create a new calendar!
Regards,
Cris

Fixed assets - non standard webadi

Hi,
I would like to know if you can use webadi for fixed assets using non standard input. The purpose of the execise is to get an excel spreadsheet details(interface details) onto an oracle table.

If you have any predefined integrator defined in WebADI for Fixed Assets then you can do it.
Otherwise you ned to define a custom integrator .
Cheers,
Naveen.

Forwarded successfully the workitem for BO-BUS2000220(complaint) in the worklist of other user: Problem in "Sent date" not reflecting correctly in SAP CRM 7.0 Web UI

I am working with SAP CRM 7.0. We have a workflow in the system which is triggered at the creation of complaint(BO:BUS2000220) and then assign the complaint workitem
in the woklist of specified agent. I have created a report and scheduled it daily to forward the complaint into the worklist of user B from worklist of user A after 7 days
from creation date of complaint. But the problem is that the forwarded complaint is showing in the worklist of user B with sent date(the creation date of complaint, not the
forwarded date).
Relevant code:
IF gw_complain-PROCESS_TYPE = 'ZCMS' AND age_complaint = 8.
          CALL FUNCTION 'SAP_WAPI_WORKITEMS_TO_OBJECT'
           EXPORTING
objtype         = 'BUS2000120'
objkey          = obj_guid_key
top_level_items = ' '
SELECTION_STATUS_VARIANT       = 0001
           IMPORTING
return_code     = return_code
           TABLES
worklist        = it_worklist[].
READ TABLE it_worklist INTO wa_worklist WITH KEY wi_type = 'W'.
CALL FUNCTION 'SAP_WAPI_FORWARD_WORKITEM'
            EXPORTING
workitem_id    = wa_worklist-wi_id
              USER_ID        = wa_worklist_esc-ESC_USER
LANGUAGE       = SY-LANGU
DO_COMMIT      = 'X'
CURRENT_USER   = wa_worklist_esc-CURRENT_USER
            IMPORTING
RETURN_CODE    = lv_return_code
            TABLES
MESSAGE_LINES = lv_mesg
* MESSAGE_STRUCT =
* USER_IDS       =
ENDIF.
Can someone help me how to change the sent date to actual forwarded date of complaint.

Hi Kavita,
There is a standard column in UWL with name 'Sent Date'. Other functionalities in UWL for example deadline monitoring (Due date column) are based on this sent date. This shows an employee what was the date workitem was created (sent date) and when it will get escalated (due date). Displaying forwarding date in Sent date will not give clear picture to employee as the deadline will be calculated based on sent date only not based on forwarding date. this was just an example.
even though if your client is insisting, i dont think it can be done without any enhancement in UWL web dynpro com sort of thing. you can check with your portal consultant too.
Regards,
Ibrahim

Problem with the Non-English Characters

Hello,
I have been using Adobe Illustrator but I have a huge problem with the non-english characters with Standart Fonts. With the Professional font's I have no problem with them. But when I'm using any standart font in font folio library I cannot type any "ğ-İ-ş". I can add those letters in fontlab with the glyphs (scedilla, idotaccent, gbreve). Most of the fonts have those letters already prepeared so I dont even have to redraw. But I can't add those glyph to every single font because I dont have that kind of time and patience. Is there any better solution for this? Or is there any font folio pack that all fonts are PRO.
I'm looking forward for your answers
Thanks.

Joel wrote: I'm told that this is the exact difference between Adobe's Standard and Pro fonts — the Pro fonts have additional glyphs, including those necessary for extended Latin script.
Exactly. The Pro fonts have at a minimum the Adobe Western 3 character set, which is essentially western European + Adobe CE.
> Standard fonts just have the basic English character set, with maybe a bit of help for Spanish and French.
A lot more than that!
> You're doing Turkish, right? Adobe's coverage for Turkish in its fonts is not great - some of the Pro fonts have Turkish coverage, many do not.
This is false. Every single Adobe Pro font supports Turkish.
To be clear:
All Adobe Standard fonts support the following languages: Afrikaans, Basque, Breton, Catalan, Danish, Dutch, English, Finnish, French, Gaelic, German, Icelandic, Indonesian, Irish, Italian, Norwegian, Portuguese, Sami, Spanish, Swahili and Swedish.
Adobe Pro fonts support those languages, plus AT LEAST: Croatian, Czech, Estonian, Hungarian, Latvian, Lithuanian, Polish, Romanian, Serbian (Latin), Slovak, Slovenian and Turkish. Some Pro fonts have more language support than this, such as Greek and/or Cyrillic, and additional extended Latin.
See: http://www.adobe.com/type/browser/info/charsets.html
Cheers,
T

Problem with the standard RMDATIND

Good afternoon
I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that will be That someone can help me ..

Thanks for the suggestion to debug the problem - but I have no idea what I'm looking for.
I answer to your question, this is not restricted to just the one user. It has happened to a few, but not all. Not sure what the trigger is.
Now it has happened for a non-portal user, that is to say when I run it test mode from SE80. Debugging has not shed any light on it. All behaves as I would expect. All the alv formatting code is executed, then the component loads and by default the 'standard view' has all column set as hidden.
Looking at this from a different perspective, when, in an alv you create a custom view and 'save as' to store the settings, does anyone know where that is saved too ? Can we delete the settings for the user ? or see the personalization ?

CSS 11501 ftp server setup problem using non-standard port

Dear Expert,
we would like to setup FTP server over CSS where our member sever use non-std-port to open both control/data channel (i.e. 6370 as ctrl and 6369 as data this case.) but seems we only get Passive mode FTP mode work only but not for Active mode FTP case for data channel establishement for server back to client...is there any professional advise can help on this case...? here is our setup info FYI
# sh ver
Version: sg0820501 (08.20.5.01)
Flash (Locked): 08.10.1.06
Flash (Operational): 08.20.5.01
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
 Secure Management
CVDM Version: cvdm-css-1.0_K9
!*************** Global
ftp data-channel-timeout 10
ftp non-standard-ports
!************************** SERVICE **************************
service ftp_ftpgtw
keepalive maxfailure 2
keepalive frequency 15
keepalive retryperiod 2
keepalive type tcp
ip address 192.168.52.170
protocol tcp
keepalive port 6370
port 6370
active
# sh run group drfusegtwftp_grp
!*************************** GROUP ***************************
group gtwftp_grp
vip address 192.168.52.28
add service ftp_ftpgtw
active
content ftp_gtwpkg-ftpgtw
 add service ftp_ftpgtw
 vip address 192.168.52.28
 port 21
 protocol tcp
 application ftp-control
 active

Thanks for your confirmation on no prob found in config level 1st..:P..as to save us a lot of time in isolating problem at this level.
What we can notice is seems the data port connection is fail to open for server back to client....for our general sense..... the flow expected should be:
TCP session A -- Client:1234 --> VIP:21 --> member svr:6370
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 6379 [on demand generated between server/client]
but we can only see session B fail to setup when client side access VIP site on CSS..even we try to put the most standard case as below
TCP session A -- Client:1234 --> VIP:21 --> member svr:21
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 20
we still unable to make the Active mode FTP access work either...hence we got no idea on how CSS handle FTP access when it involve services over multiple tcp ports..
and from CSS xlate view...the problem is we can only see what NAT IP that used in CSS connect to client...but no way to confirm for which port for VIP using outgoing to client. neither it is dropped by CSS..nor it is never setup from VIP to Client side.

How to solve sync problem between Outlook calendar and iPhone when reminder is set to _some_ non-standard values?

Hi,
I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
Here is the description of the problem:
1. In Outlook - please create a new event/appointment (e.g. "Test").
2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
3. Click on "0,5 days" and change it manually to "14,5 days".
4. Click on "Save & Close".
5. (Do not snooze or dismiss the reminder.)
6. Sync with your iPhone/iPad.
7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
Thanks!

Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do:
Launch iTunes.
Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
Connect the iPhone to the PC and let iTunes recognize it.
In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
In the top left of the iTunes app > click Exit.

Non-standard install problem

I'm trying to upgrade to the newest Flash player for Opera on Windows XP but I can't get it to install properly. I think the problem is that Opera (9.4) is installed to a non-standard folder on my machine (.../Opera7) rather than the usual .../Opera folder and I'd rather not have to change it. Any ideas on how I can install to the correct location? Any help would be appreciated.

If that didnt work try this below:
1) Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
2) Type cd C:\Windows\SysWOW64
3) Type regsvr32 vbscript.dll (This registers VB Script with your computer.)
4) Now install iTunes as you normally would by double clicking on the install program and wait for iTunes to finish installing.
5) Type regsvr32 \u vbscript.dll (This unregisters VB Script with your computer.)
THIS ONE COMES WITH A WARNING
TRY BOTH OF THESE AT YOUR OWN RISK
AND some thing below to consider about this second step, not the first post
To enabled, VB Script a scripting language that has been responsible for more trojan and worms floating around the internet than any other on the face of this earth. All in order to install one of the earths most popular programs to get our daily audio fix. So we have to disable security measures built in to protect the operating system from malicious code and leave our selves wide open.This would be the equivalent to Microsoft telling Mac People to disable buffer overflow protection in order to install Microsoft Office for the Mac.

In FireFox 9, loading secure web pages running on non-standard ports works just fine. In FireFox 10, those same pages do not load and a "The connection was reset" message is displayed.

How can this be fixed so functionality returns as per FF9 and below?
This occurs on any secured website running on a non-standard port, with FF10.

< X-Post from https://support.mozilla.org/en-US/questions/917315#answer-315144 >
I don't think this is restricted to Firefox. I've noted this behaviour with IE9, Firefox 10.0.2, Opera Mobile (on my phone) and Chrome(latest version) with my Linksys E3000 router (I access it from https://<IP>) and my 3ware RAID card management suite, 3DM2 (I access it from https://localhost:888 ).
Notably, the only thing amiss that I've been able to see in the certificates (I'm no expert) is that the one from Linksys has issue and expiry dates in 1969 and 1970 respectively. However, I don't think this is the cause since 3DM2 has proper looking issue dates and has the identical problem.
Coincidentally, I noticed this happening after a fresh reinstall of Windows 7 x64 with virtually nothing installed on it (FF, Office 2007), so I don't think it's something wrong with the other software on the machine.

Kvirc from SVN {NON-Standard-Install-Method} and Overcoming 2 Problems

Hello, everyone. Firefishe here.
There are certain programs I like to compile from source code, outside of the normal arch hierarchy of PKGBUILD's. One such program is the Internet Relay Chat client, "KVIRC".
I've been using kvirc for years, and I like to keep it as up-to-date as possible, just like Arch!
This is why I like to use the svn version, so I can update it quickly and uniformly. I like--as a user--to contribute back to the project. (I had one of my bug reports translated into an instant commit by the main project author, himself, once. That made me feel quite good, so it really does help to do a few things like this now and again.
Okay, on to the main topic.
I'm writing this to alleviate a nagging problem that had been plaguing me for months in 2013. Qt5 just wasn't compiling kvirc very well back then. The fact is, the echoing strains of "qt5 is broken in kvirc" from the #kvirc channel on Freenode, resounded soundly throughout that entire year. Qt5 was still a bit buggy, and not all the libraries (32bit or 64bit) were quite finished.
Move forward to (now) July, 2014! I have now compiled kvirc successfully on my 64bit (with 32bit multilib installation) laptop, and kvirc is purring away with a current svn build of kvirc.
However, I ran into some issues, which I would like to share with you, below:
I usually go about compiling kvirc from svn like this: (I usually start from my /home/userNameHere directory.)
{arch@homedir}$ svn co https://svn.kvirc.de/svn/trunk/kvirc
{arch@homedir}$ cd kvirc
{arch@homedir}$ mkdir release
{arch@homedir}$ cd release
{arch@homedir}$ ccmake ..
[At this point, the 'ccmake ..' command invokes cmake-gui, an ncurses-like graphical user interface, with a list of menu items pertaining to various libraries and flags that can be set. cmake-gui makes selecting these flags and libraries quite easy, and also gives a clear indication of what directories may not have been found (which will be discussed a bit later.) ]
Press the 'C' Letter Key -- (This runs the Configure Routine. I sometimes do this twice, just to be sure it configured properly. I've had it miss a few times for unknown reasons.)
Press the 'G' Letter Key -- This 'Generates' Cmake files.
After the 'G' command, the system takes you back to the command prompt.
{arch@homedir}$ make ***WAIT A WHILE, COULD TAKE A BIT LONGER ON SLOWER SYSTEMS!***
{arch@homedir}$ sudo make install (Or 'su -' to root, then do 'make install'; your preference. I prefer using sudo.)
{arch@homedir}$ sudo ldconfig (Or 'ldconfig' if still at root prompt #)
{arch@homedir}$ kvirc (or 'kvirc &' if you don't want the terminal window to hold onto the process.)
Kvirc should run at this point, but I ran into a couple of problems. Once during the ccmake configuration (which prevented ccmake from configuring), and at the end, which prevented kvirc from running.)
The first had to do with two (2) packages that were not installed. The were, as follows:
qt5-webkit
qt5-multimedia
I installed those files, then did the 'ccmake ..' portion. That ran fine, as well as the 'make' and 'sudo make install' and 'sudo ldconfig' parts.
What didn't work was when I tried to run kvirc. I got the following error:
{arch@homedirc}$ kvirc
kvirc: error while loading shared libraries: libkvilib.so.4: cannot open shared object file: No such file or directory
I remember, back when kvirc was wanting Qt4, and not Qt5, that if I didn't do the first 'sudo ldconfig' command before trying to run kvirc, it would give something similar. However, since this compile run was wanting Qt5, and not qt4, I was puzzled.
Well, it turned out to be something quite simple. This is a non-standard process of software installation on a new(er) arch system. The 'uname -r' command on my system yields the following: 3.15.4-1-ARCH . It is no surprise, then, that at this late date, Qt5 is complete (or at least more complete) than back in 2013 when I had the original problems, and had to select the 'WANTS-QT4' section during the 'ccmake ..' command.
**** Building kvirc this way places the kvirc binary in /usr/local/bin, and a certain 'libkvilib.so.4' library in /usr/local/lib ****.
This is to be expected from a standard source compile on most gnu/linux systems; and this *is* a standard compile, even though we're using the 'ccmake ..' command to do the preliminary configuration and cmakefile generation.)
The problem is, is that Arch is looking for libkvilib.so.4 in /usr/lib, and not /usr/local/lib. So the following was, for me, the solution that got everything squared away:
I made a symlink in /usr/lib to /usr/local/lib/libkvilib.so.4, like this:
{arch@homedir}$ cd /usr/lib
{arch@homedir}$ sudo ln -s /usr/local/lib/libkvilib.so.4 libkvilib.so.4
After doing this, I did:
{arch@homedir}$ kvirc (or kvirc &)
And It Ran Beautifully! :-)
I hope you've enjoyed this HOWTO. I know most people may just want to use the 4.2.x version of kvirc, currently residing safely in the standard repositories. However, if you're like me, and want a bit of bleeding edge, Qt5 goodness with kvirc, I might suggest doing the above!
I can be reached at firefishe At gmail DOT com if anyone has any questions.
Last edited by Firefishe (2014-07-11 09:23:20)

Hi Dareen,
Looking at the information shared and also the error message ( Update Failed,Updates could not be applied.Please contact your Administrator if you wish to apply updates on your machine. Updates have been suppressed by the Administrator.If the problems persist, contact customer support for further assistance" ),
It suggests that the updates were to be managed by the Admin only. Lets try the following step and suggest if this was able to resolve the concern that you have or not.
1) Navigate to C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0 and you will find a .dat file ( AdobeUpdaterAdminPrefs.dat).
2) Please open the file in question and you will find a line item : <Suppressed>1</Suppressed> .
3) Please change the Value from 1 to 0 and save the file back in the same location.
post the above step, try the installation once again and share the end result please.
Cheers,
Kartikay Sharma

Workflow Aproval - Non standard (Problem in the Worklist - bbpbwsp)

Similar Messages

Maybe you are looking for