Workflow - AVCHD to DVD but without optimised footage?

I am an enthusiast and I have a few Panasonic prosumer camcorders with which I shoot basic AVCHD and ultimately I burn DVDs - which people tell me look just fine.
When importing I have “Leave files in place” checked and I create Proxy files ONLY as obviously these work best for multicam editing. I used to create optimised files too (someone told me I should) but they don’t seem to do anything for me - am I wrong?
After editing, I click on Share to create a 'Master File' from which I go on to author the DVD iso. I leave the 'Media' on 'Proxy’ (is there any reason to ever change that?) and all by itself I get a file with the following characteristics:
Dimensions: 1920 x 1080
Codecs: Apple ProRes 422, Linear PCM, Timecode
Color profile: HD (1-1-1)
I’m very happy with that but my question is: should I be creating optimised files too? If so, WHERE in my workflow would they come into play?
Many thanks in advance!

Sounds right to me.
AVCHD should work fine in up to date date Macs.
Using Proxy (without switching) in the Timeline will give you a sub-standard DVD as that will be the size of the export.
Roughly 30% of original.
Al

Similar Messages

Anyone got any good AVCHD FOR DVD Presets they can share for AME CC Latest Version when exporting from Premiere Pro CC Latest Version?

Just wondering if anyone has for download or can share some templates or settings that I can use to create a One Stop Encode that will suit both AVCHD HD DVD Disc and be good as a Computer MP4 File for PC and Android Mobile Playback and maybe even good enough for Full Bluray Mastering.
Currently I am using mostly HDV 50i Material with a bit of 1080 30p and Mobile phone type MP4 files thrown in.
I typically Encode to for DVD SD and HD BD. However I would like to be able to take advantage of putting some of the short HD Video to AVCHD DVD-R Discs.
I understand that the maximum bit rate is gonna be 18mbs? for AVCHD on DVD but am unsure what Profile settings I need to be compliant and as I say if create a good one MP4 that will be good for all formats
whether it be AVCHD DVD, Blu-ray Disc and good for YouTube uploading with possibility of compatibility with some of the Android Mobile Phones and Tablets.
Thanks in Advance
Phil

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR?

Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR? The Apple store is a two hundred mile one way trip.

I didn't imply anything; I simply explained the terms of the ToU here because you had not specified what you were trying to do. Most such related questions are about copying protected content and I would not appreciate having my post removed with the obligatory email from Apple because I violated the ToU. In any case, you can find dozens of threads googling (or here) about the newer burners being slow copying content if it is protected. FWIW, if the DVD was produced by a commercial outfit, they may have used some sort of protection or an unusual file format - that problem has been discussed here previously.
As for your slow burner - since we don't even know what type of Mac/model/year/OS you have, it is impossible to guess. If it's an iMac, those vertically installed burners are known to be less than perfect; the horizontally installed versions are better, but still not as good as an external. I've used an external burner for years.
As for the conversion time: the burner should have nothing to do with that; it is your software and your Mac's processor and amount of RAM that matter for conversions and rendering. I have no idea what you are using to burn the DVD. And, as a last consideration: you should always burn your content at a slow speed so you can avoid burn errors and have better results.
Good luck.

I have been transfeing my DVD footage to I movie using handbreak and the spinning wheel of death has arrived and locked up I movie as I tried to import footage. The message says, "Optimizing movies, processing event DVD" but I can't get out of it.

I have been transfeing my DVD footage to I movie using handbreak and the spinning wheel of death has arrived and locked up I movie as I tried to import footage. The message says, "Optimizing movies, processing event DVD" but I can't get out of it.

Yes I held them down till the apple logo appears, then spinning wheel and repeated boot up process. I only knew it was going round in circles because the charging sound kept repeating every so many seconds.
I am downloading iOS.5.0.1 now to do a complete factory restore. I hope this works. I have been looking online for hours for fixes and I have very little batter on it as its been spinning for hours now.
Why do things like this happen? I am sat there watching tv and one minute the settings folder is there then its not! How does that happen? It just disappear? I hadn't moved it to another folder or deleted it, it just.... went!

My share operation failure occurs after about 5 seconds for DVD and Apple Devices. I can share to a master file, but without audio. Help?

My share operation failure occurs after about 5 seconds for DVD and Apple Devices. I can share to a master file, but without audio. Help?
It has error number -50.

If it only happens with this project, it's probable some media files have become corrupted.
Those may be render files. Make sure background rendering is off. Select the project in the browser and from the file menu, choose Delete Project Render Files; choose All from the dialog. Without rendering,try exporting.
If that doesn't work, use an optimized version of your DSLR clips. (Right click on the clips in the browser and hit Transcode.)
Russ

AVCHD to DVD revisited

I am shooting 1080i 29.97 AVCHD footage using the Sony NX5U. I have followed the advice in this video for converting the footage to MPEG-2 for DVD authoring, but I'm not happy with the results:
http://bellunevideo.com/tutvideo.php?tutid=10
Has anyone come up with a different way of going from AVCHD to DVD that works beter than this?
(I'm not criticizing Jeff Bellune's video. I appreciate that he took the time to make the tutorial, and this may in fact be the best that can be done)
J. D.

"Also, I'm curious - how were you viewing the MPEG2 DVD results when you decided the quality wasn't good enough?"
Funny you should ask this. I was planning on waiting until tomorrow to respond to most of these suggestions because I am starting to wonder if it's my television that is the problem. I am authoring a DVD with the Mpeg2 DVD file in Encore CS5, then burning the DVD and viewing it on a Viewsonic 20" widescreen TV from an upconverting DVD player with an HDMI cable (I've tried two different models of player). I've already discovered that unless the sharpening on this TV is set to absolute minimum, the sharpening artifacts are very noticeable. Even after this adjustment, I still see a thin halo around people with light-colored clothing against a dark background. Also, the video is of a children's dance recital (yeah, I get the big time gigs, don't I), so there are a lot of artifacts when there is a lot of motion. I've tried playing the footage straight from the camera to the TV via HDMI, and I don't see any of these problems.
I'm going to take my DVD home tonight and watch on a different widescreen TV. I'll let you all know tomorrow if I see the same issues or not.
"If you want to try Pr again, make sure Use Maximum Render Quality is checked in the Export Settings dialog."
Interetsingly, the Premiere manual reads "Maximum Render Quality often makes highly compressed image formats, or those containing compression artifacts, look worse because of sharpening." I've been using MRQ, but since AVCHD is a highly compressed format, maybe this shouldn't be used? I tried converting a bit without MRQ checked, and it didn't seem to make much of a difference.
J. D.

Pre12 – unable to burn AVCHD to DVD media

I'm using Pre 12 with Windows 8, editing AVCHD video, and want to burn AVCHD to DVD disk media (to play on a Blu-ray player). However, whenever I try Pre12 shows “media not present” as status, despite having a blank DVD in the drive. But, simply changing from AVCHD to DVD works fine.
Some background: I’ve been a Premiere Elements user since V1 and after purchasing a HD camera several years ago I’ve burned many short HD videos on DVD media s using Pre 10 and 11 AVCHD format option. However, that was before converting to a new computer and installing Pre12.
My new computer is a Dell XPS 8700, Win dows 8 64 bit, with an internal Blu-ray Combo Drive (Reads BD and Writes to DVD/CD). The drive shows in Windows Devices as “HL-DT-ST DVDRWBD CH20N”. It claims to read and write DVD media in either the plus or minus types. I’ve been using TDK single side DVD + media. I've reported the problem to Dell Technical Support without success.
So, I don’t know if the problem is with my hardware, media, or a bug in Pre12, and would greatly appreciate advice.
Thanks in advance

1. Yes, HD or SD video will burn (in DVD format) to DVD media on either internal or external optical drive. The reinstall of Pre 12.0 solved that problem.
2. There was no change to results when attempting to burn AVCHD to DVD media. The internal optical drive continues to show "media not present", while the external drive shows "ready"
3. There was no change to results when burning to Blu-ray which continutes to operate correctly - the external drive shows "ready" (and burns are still successful). Note that the internal drive can only write DVD media so isn't shown by Pre 12 for this task.
Below is revised table of results:
Source Video
SD
SD
SD
HD
HD
HD
Task:
Burn DVD
Burn AVCHD (to DVD media)
Burn Blu-ray (to Blu-ray Media)
Burn DVD
Burn AVCHD (to DVD media)
Burn Blu-ray (to Blu-ray Media)
Status/Result
Optical Drive E:
Internal DVD Writer
Ready
Media not present
Burner loacation N/A
Ready
Media not present
Burner loacation N/A
Optical Drive F:
External USB 3 Blu-ray Writer
Ready
Ready
Incompatible disc (with DVD media), Ready with Blu-ray media)
Ready
Ready
Ready
So, ok to uninstall and reinstall Windows driver for internal burner?
Thanks

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Best workflow for making dvds on printable disks

I am going to burn a few dvds and want to also use my printer to print some images onto the dvd itself.
I have printable dvd-r blanks, and will use idvd and my mac pro dvd drive to make and burn the dvds, but I am wondering which is the best sequence to do it in?
Do I burn the dvd first and then print on its surface, or do I print the surface first and then burn the dvd?
Will one way be better for avoiding burning or playback problems or does it make any difference?
Thanks for any advice.

How do I use it if I want to burn another copy of my movie to a dvd in the future?
I use Toast to make all additional copies from a disc image (or from the finished dvd itself). But you can also use apple's disc utility just the same without the additional cost of any 3rd party software.
There is very little difference between a disc image and a finished /burned Dvd-R. Both are fully self-contained (complete with video_ts folder/s). Both respond exactly the same way when played with apple's dvd player app.
Yes you can go ahead and delete all prior iDvd and iMovie project files (assuming all is exactly the way you want the dvd to play now and to look like as far as menu selections, movies, titles, audio, and slideshows). But I personally would not delete any of the above files until I am 100% certain I will not need them again in the future (in terms of further modifications to an existing iMovie project especially). External HD space is rather cheap these days and I have a habit of keeping existing iMovie project files and if necessary archiving an existing iDvd project file which I'd rather not have on my boot volume but poses no problems on an ext. FW HD.
Message was edited by: SDMacuser

When "Edit in Photoshop" in lightroom photoshop opens the picture but without the changes I made in lightroom

when "Edit in Photoshop" in lightroom photoshop opens the picture but without the changes I made in lightroom
Please help me

Hi mariad91843143,
To enable the non-destructive workflow and the powerful features of Photoshop CC, the RAW image will need to be opened into Photoshop whilst, in the meantime, keeping our Lightroom changes so that we can work on them later. Instead of using the ‘Edit in Adobe Photoshop’ option in Lightroom – CMD +E (Mac) or CTRL +E (PC) – the option ‘Open as Smart Object in Photoshop’ will be used.
This is a very useful tutorial to understand how to manage the workflow between Photoshop and Lightroom Canon Professional Network - Lightroom & Photoshop CC workflow (Pt. 1): Smart Objects ....

Photoshop CS5 opens but without the chosen picture

After choosing a picture (jpg) in Bridge CS5 to be opened in Photoshop CS5 Photoshop is being started but keeps empty. The picture isn't opened. If I choose 5 pictures there will be opened 5 empty instances of Photoshop but no picture will be opened. I notice this behaviour since having updated to Raw 6.4.
Any ideas? Thank you Hans-Georg

Hi Noel,
i just tried to see a rule in what Photoshop does, but it is not always the same that happens.
First I marked 5 jpgs in Explorer an tried to open with rightclicking an choosing "open". --> Photoshop was opened and all pictures were shown. I closed Photoshop.
Second I opened Bridge and marked five jpgs and tried to open them with rightclicking and choosing open with Photoshop. --> Photoshop opened but without any picture. Photoshop keeps open...
Third I tried to open one single picture via dubbleclick in explorer.--> another Photoshop opened but without the picture.
Fourth I tried to open two PSD-files via marking and rightclicking and choosing "open". --> two other instances of Photoshop opened without pictures.
At last I tried to open 5 jpgs via marking and rightclicking and choosing "open" (in Explorer). --> five other instances of Photoshop opened without pictures.
so this looks strange:
what I'm wondering about:
normally if Photoshop is already opened, every additionally clicked picture will be opened in this one Photoshop-instance.
Why does Photoshop open without opening the picture?
It drives me crazy because I have to edit a lot of pictures during the day and the usual workflow doesn't work...
Any other ideas? Thanks in advance Hans-Georg

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps!

HD 720 24p workflow to SD DVD

I have an HVX200. I shot in HD 720 24pn, editing in 720 24p timeline, how do I see the output on a SD monitor in realtime in order to do color correction? I only have a fiirewire DVCam deck. I can onlt seem to see one frame at a time through my deck?
After editing in the 720 24p timeline, I tried select all and pasting into a DVNTSC (29.97) timeline. I can see the video in real time, but I got one frame gaps in my sequence. What do I do with that?
I've read that outputting through compressor is best workflow to DVD, but I would like to see it on a SD monitor first to color correct.
Confused

You cannot view DVCPRO HD thru a DV deck in real time. Nor will you see anything resembling accurate color. You will need an HD capture card and HD monitor. One cheap option is the Matrox MXO and Apple Cinema Display.
http://library.creativecow.net/articles/ross_shane/MXO.php
If you have a MacPro, you can look into the Decklink Intensity and then an HDTV.
After editing in the 720 24p timeline, I tried select all and pasting into a DVNTSC (29.97) timeline. I can see the video in real time, but I got one frame gaps in my sequence. What do I do with that?
Don't do that. Why are you doing that? When you copy and paste clips of one frame rate into a sequence of another frame rate...that happens. So...don't do that.
I've read that outputting through compressor is best workflow to DVD, but I would like to see it on a SD monitor first to color correct.
Well...you can do it the way you are doing it, but the colors won't be accurate and you can only see one frame at a time. Unfortunately you cannot route the signal thru the camera like you can DV...so you are still looking at needing an HD capture card and HD monitor or TV. Or MXO/ACD.
Shane

Workflow - AVCHD to DVD but without optimised footage?

Similar Messages

Maybe you are looking for