WorkFlow BOR : Change Method
Hi,
Can I know the BOR Object for sales order which includes Change method.
Hi Meghna,
I think the SDN team has already provided the answer. If you require any other information then please post a new thread.
Thanks in advance for your kind coooperation.
Regards.
Abhijit.
Similar Messages
-
Trigger workflow after change of control record(pa03)
Hi Experts,
Is it possible to trigger a workflow after change of the control record - transaction pa03?
Thanks,
Agata
Edited by: Agata Nowak on Sep 14, 2009 12:43 PMHi,
Thanks for replay but:
1. just so the event or action in PA03 , on which you want to trriger WF ,Before that with TCOde swels switch ON , then afer the action in SWEL , you wil find if any BO and event is there for that action . if so , then using this you can trriger you WF. if not
I've already tried this and no event is triggered ;(.
then
2. you can go for user exit , badi or enhancement spots (verson ECC.6.0 above). in that using SWE_EVENT_CREATE creat the event to start yr WF.
I've been already searching for BADI or user exit but I really can not find any user exit nor badi for this transaction (in fact it is SAPMP52X Program) ;-((
Thanks,
Agata -
Oracle i Supplier Portal Workflows - Supplier Change Order Workflow
Hi Friends,
Oracle iSupplier Portal uses the following workflows:
■ Supplier Change Order Workflow
■ Update Capacity Workflow
■ Order Modifiers Workflow
■ Advance Shipment Notice (ASN) Workflow
■ Purchase Order Acknowledgement (handled by PO Approval Workflow)
My problem is related to - 'Supplier Change Order workflow'
I would like know is there are any changes in the work Flow - 'Supplier change order Work flow' in 11.5.10 to 11.5.8
If yes,kindly list the changes.
Thanks in advance!
Thanks & Regards
Dilip NomulaThe best way to determine this would be to download the workflow into a wft file from 11.5.8 and 11.5.10 instances and run a simple Unix diff command on these two wft files. I do not believe you will find any documentation that will list differences at this level of detail.
HTH
Srini -
Workflow: State change on given date
Hi,
another problem: the state of a workflow shall change, when the start
time of an entry has reached. As there is no "on start time" but "after
start time", I tried "0 minutes" or "0 days" - but the change won't
happen. If I choose a start time in the past, the state is changed fine.
Greetings
AndreasOK; forget about this. Those who are able to read are always in
advantage. I used a user with a wrong timezone! Where is the ton of
ashes to be thrown over my head? :D
On 07.06.2010 15:53, Andreas Ollenburg wrote:
> Hi,
>
> another problem: the state of a workflow shall change, when the start
> time of an entry has reached. As there is no "on start time" but "after
> start time", I tried "0 minutes" or "0 days" - but the change won't
> happen. If I choose a start time in the past, the state is changed fine.
>
> Greetings
> Andreas -
Text or GREP find/change method to assign tags
Hi all
I could use a text or GREP find/change method to assign tags to paragraph styles (for use in FindChangeByList), would anyone be able to help please?
SteveHi Peter
I produce a quarterly magazine for which text is supplied in Word format.
I currently run the 'FindChangeByList' script to format body text, headings, bulleted and numbered lists, web and email address text styling and to remove/correct all extraneous characters etc.
Once the job is printed I need to produce a tagged 'accessible' readable (eg: read out loud function in Acrobat) pdf from the file, for text to speech readers.
I am currently using the map tags to styles function, which allows me to assign tags which in turn gives me control of the 'text reading' order.
What I'd like to be able to do is automatically apply the Tags to syles while processing the 'FindChangeByList' script.
Steve -
Hi,
I am new in workflow. I am working on quotation workflow. I am using one zbusiness object which is working perfectly. But when i am using this object in my workflow one of method in this object is not working . It is excuting properly but logic within this method is not working.
Regards,
GurpritI wouldn't mind trying to help, but I can't - because you're not letting anyone help you! How do you think we can help with your problem when you:
1) don't say what you are trying to achieve with your method.
2) don't give us the non-working (section of) the code.
So please give some more information about your problem. Read the community guidelines for information and tips about phrasing your question.
PS: When one of the methods in your object is not working I think it is slightly incorrect to say that your object is working perfectly... -
Seen a lot of posts asking about IP profile change methods and so here is how i believe they work. Hopefully this messgage will remain formatted as it is typed
You will be on one and only one of the 3 methods although there are some rare exceptions such as fixed rate lines and banded rates. For banded rates due to line issues I have been informed that it can take 3 days to sort itself out if the line remains ok. Additionally for new or reset lines the bedding in period varies between 3-10 days and than can effect the profile used.
1 88.2% method.
This is the newest method and basically removes the concept of a profile as such as matches similar other schemes in place by other providers. Your 'profile' is set to 88.2% of your downstream sync rate (which allows for the overheads needed that are contained wiithin the traffic). Setting is I believe reasonably concurrent with a change in sync speed but that remains to be be confirmed and it could be that it may take up to 75 minutes as per currently decreases would take. IMJOLLY has confirmed that change is immediate.
It is believed that all exchanges will be upgraded to this method eventually but that has not been confirmed. If you run a BT speedcheck it will tell you your IP profile, if it is not a nice round value ending on 0 or 5 then you are on this method already, otherwise your profile should fit one of the values in the table further down (unless your speed is greater than I cater for) It is now suspected that only CN21 enabled exchanged may be getting updated leaving the others at a even greater disadvantage.
2 Oldest method
Decreases in profile take up to 75 minutes to apply, increases can take up to 3 days from the time of a higher sync.
3 Adaptive Max
Adaptive max is available on some exhanges and is an attempt to speed up the resets for those affected without resetting it too quickly and causing more issues if there is a line issue.
Change depends on the lowest rate that caused a decrease and the new profile that your current sync would fall within. (decreases are within 75 minutes, the table is for increases only)
The table for the ADSL2+ rates are as follows
0
135
250
350
500
750
1000
1250
1500
1750
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7150
135
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
250
24
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
350
24
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
500
24
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
750
24
24
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1000
48
24
12
12
12
12
12
12
12
12
12
12
12
12
12
1250
48
24
24
12
12
12
12
12
12
12
12
12
12
12
1500
72
24
24
12
12
12
12
12
12
12
12
12
12
1750
72
24
12
12
12
12
12
12
12
12
12
12
2000
48
24
12
12
12
12
12
12
12
12
12
2500
48
24
24
12
12
12
12
12
12
12
3000
72
24
24
24
12
12
12
12
12
3500
72
24
24
24
12
12
12
12
4000
72
48
24
24
24
12
12
4500
96
48
24
24
24
24
5000
96
48
24
24
24
5500
96
48
24
24
6000
120
72
48
6500
120
96
7000
120
7150
Old rate is down the side and new rate along the top, the resultant value is the number of hours for a change to take place. This is the minimum time and it seems that it may take a few hours longer than expected, probably because I suspect that the process to check/reset the values only runs periodically and so you should probably allow up to 2 hours or so extra.
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’Still not been able to get a confirmation of the upgrades (or at least mine) neither the mods here nor BT technical helpdesk have replied yet to my query on it.
When it comes it it will I expect remove the need for a lot of people to be raising issues and calling the helpdesk.
I am pretty sure re how adapative max is working on my line, the last few occassions have all fitted that pattern as near as I can tell exactly. Different exchanges may run the updates at different times perhaps but I suspect it is a common setting so perhaps not but for me the time starts to count from the next xx:30 time after a higher sync, lasts 12 or 24 hours and then the next xx:30 time therefater the profile gets reset.
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’ -
Can i rollback my workflow versions changes in mm work flow?
Dear All,
Can i rollback my workflow versions changes in mm work flow?
MoosaHi ,
please refer to this blog for versioning -
/people/sunil.ojha5/blog/2008/01/29/versions-of-a-workflow
Thanks,
sahiba -
Why my workflow name changed?
Hi All,
Once I republished my workflow, my workflow name changed into "Workflow Status (1) ". Initially it was like "Workflow Status". What will be issue, how to fix this?
Thanks in advance!Hi Sam,
According to your description, my understanding is that the workflow name changed to Workflow Status(1) after re-publishing the workflow.
I recommend to remove the Workflow Status(1) from SharePoint and then re-edit the workflow in SharePoint Designer, then publish it again to see if the issue still occurs.
Please go to Workflow Settings of the list which the workflow associated with and then Click Remove a workflow.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Workflow : attributes and methods in BOR
Hi to all,
I need to create a custom attribute in custom BOR object. I want to put some value in custom attribute by using select statement . where do i write the code for that attribute in BOR. In standard methods i have seen that ex: gw_purchase = object-key-number wt is that object-key- number. wt is the value does this holds
so any one please explain me with details.Hi,
methods in BOR are piece of codes that you execute in runtime by calling them in workflow. So when you check the box object method with dialog, such methods need to processed by user i.e; workitem agents. If you don't check this checkbox, the piece of code (method) will you be executed in the background without sending the workitem to user.
Let me know if you still have doubts.
Regards,
Raj -
Update Contract Account in Background - BOR "ISUACCOUNT" Method "Change"
Hi Experts,
We are trying to update the "Dispatch Control" & "Alternative Bill Recipient" fields on the Contract Account in background.
We are using BOR - "ISUACCOUNT" and Method - "Change". The Method is unable to update the field values but not giving any error or exception.
Please sussest if someone has worked on such scenario before.
Thanks,
AnkurHi ,
Is it tiggering ur BADI implementation or not ? If yes then whats ur logic to update ?
regards
Prabhu -
Problem with Task 65400034 BOR BUS2105 method EDITASYNC
Hi all,
i implement Workflow scenario for purchase requisition, i use the SAP standard workflow. When a user reject a purchase requisition the system launch the workflow n° 65400029, the first activity is the task n° TS65400034 which execute the method EDITASYNC of the BOR BUS2105. Normally the user can modify the purchase requisition but in my case, all field are disabled, i can't do any changes yet i'm in transaction ME52N.
Thansk for help.
Cheers.Hello,
this is working as-designed:
When the purchase requisition/order is rejected, it gets protected and the requisition/order is not changeable, anymore.
To start a re-approval, the initiator needs to "Cancel the rejection", which is done in the release transaction (ME54N, ME29N). After done so, all fields become editable again.
On saving the document, new events .ReleaseStepCreated will be created by the transaction setting it back into the release process.
To avoid confusions for the initiator/user here, you should call the method .SingleRelease instead of .EditAsync
Best wishes,
Florin
Edited by: Florin Wach on Nov 5, 2008 12:09 PM Some typos corrected -
Hi Experts,
I have created a subclass for BOR = IDOCORDRSP like ZDOCORDRSP for using in my workflow.
In my worflow i have to process my IDOC based on some condition
I have calculated the status ,
if its 'A', i process the IDOC and update my Purchase Order ,
if the status is 'R' i want to delete the IDOC so PO wont be updated
Which are the methods that i am supposed to use for the standard BOR "IDOCORDRSP" for this functionality.
Many Thanks..:)
BijalHi Bijal ,
You can create your own method for implementing this functionality . Just add a new method to your Z Object write the code for checking the status and processing the IDOC .
Include this step in your task . -
How to call BOR object- method in custom program
hi all,
I have the following details:
BOR object : INSTLN
Method: createdirect
I need to call the above method in my custom program.
I need to call it entirely. Means if it contains fn modules I dont want to call those fn modules seperately.Hi Sammy,
Phil Soady from SAP Australia provided me with this little gem a few years back. The actual documentation for this can be found somewhere in the workflow programming area, but I just looked and couldn't find it for you. Anyway, this is a sample program I built to show how to do this. In this example I call the Display method of the Sales Document BO.
INCLUDE <cntn02>.
INCLUDE <cntn03>.
FUNCTION zcallbomethod.
*"*"Local interface:
* Data declaration
DATA: vbak_ref TYPE swc_object.
* Declare and initialise container
swc_container container.
swc_create_container container.
* Create object reference to sales document
swc_create_object vbak_ref 'VBAK' '0000000009'. "Sales Document Number
* Call Display
swc_call_method vbak_ref 'Display' container.
* Error handling
IF sy-subrc NE 0.
ENDIF.
ENDFUNCTION.
Cheers
Graham Robbo -
Activating Workflow for Change Documents
Hi
I am working in cProjects 4.0 on ECC6.
I am working on the scenario of automatic email generation when change document is created for project element.
I have used sample workflow WS28700006 and following settings have been made :
1. Make the required settings in the SAP menu under Tools → Business Workflow →
Development → Definition Tools → Events → Event Creation → Change Documents
→
a. Overview (transaction SCDO)
Enter DPR_PROJECTS in the table.
b. Define Workflow Properties (transaction SWED)
Enter the following data:
Change document object DPR_PROJECT
Leading table in change document DPR_PROJECT
Change document key with structure DPR_PROJECT
Action: Change X
Structure DPR_TS_BUSINESS_OBJECT_KEY
Function module BAPI_BUS2175_OBJECT_KEY_SET
c. Linkage (transaction SWEC)
Enter the following data:
Change document DPR_PROJECT
Object category BOR object type
Business object type BUS2175
Event CHANGED
On change X
In cProjects I have I have attached word document, and another user changed it and changed document again checked in again with overwriting the old one.
But no workflow triggerd. In SWI1 transaction I cannot see any workflow triggered.
Is there any problem with workflow and process or changing document in cProjects is not write ????
Can someone help ????
Regards,
Niraj SikligarHi Niraj,
Please ensure that you have made IMG setting for cProjects > Basic Settings>'Activate Change Documents'.
'Change Documents' means that any change in the Project Objects will be recorded, and not the changes in the documents that have been attached.
I am not too sure about the workflow settings that you have made, but just try with the img activity that I've mentioned. You can test the same by making some changes in Project ( for eg change the Project Status) and save it.
Let me know if it helps.
Regards,
Vivek Pandey
Maybe you are looking for
-
How to display the status of a SubVI on the front panel?
Hi, I am writing a program to control an instrument through a serial communication port. The control and communication functions are integrated in a SubVI and they work fine. In the front panel of the main VI, I want to add some indicators to display
-
Final Cut Studio interface uniformity
I have a problem with two UI's in Final Cut Studio. Interfaces which compete with program material draw away from creative processes IMHO. My main concern is that the brushed-aluminum (or titanium) interface in FCP and Motion visually disrupts my vie
-
Hi, I have a Matrix. In Each row i want like to populate matrix with values based on the row. My problem is once a combo gets populated in one row, the same value gets populated for other rows also(inspite of changing values)
-
Jam - SAP Business ByDesign Integration
Hi community, are you aware of anyone working on an integration between SAP Business ByDesign and SAP Jam? From ByDesign we would have similar use case requirements as the Cloud for Customer / SAP CRM integration offers... Thanks and best regards, Ge
-
My sim says searching all the time even when i take out my sim card
MYiPhone 5s sim place searching all the time even when i take the sim out of the phone