Workflow Builder and TOAD using Wine

Hi all...
Has anyone managed to get wine to run workflow builder on linux.. Also how about TOAD???
Any advice very much appreciated!!!!
I have dual boot XP and RH9 (2.6)
Cheers
Chris

This is because Workflow uses the NLS_LANG variable to handle translated versions of workflow processes. The translated versions are stored separately in the database, and when you save a process definition from the Builder to the database, the NLS_LANG setting is used to determine which version to update.

Similar Messages

  • 601 SAP Business Workflow - Build and Use

    Hello,
    I am working in ABAP for last 6-7 years. Due to project need planinng to take BIT 601 SAP Business Workflow - Build and Use  class.
    Please suggest if this class is good  to get started in SAP workflow. Pre-requisite for this class is BIT 600. I am not taking that class. Can I do self study and pick it up?
    Please suggest how I can get ready for workflow.
    Thanks,
    AP

    Hi,
    Org structure needs to be setup by HR, but you can set up org structure yourself. Its not a big deal. 601 will go thorough this process. Also you can have workflows without org structure.
    Go through this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70b074ac-fa1b-2a10-1587-bd084347fc56
    On help.sap.com, there is a demo for an absence request workflow. If you go through them, it should give you an idea of all the basic tcodes including the creation of a HR org structure, workflow build etc.

  • Diff: Version on workflow builder and Maintain Active Plan version on SWU3

    Group,
    Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
    Thanks in advance !
    Richard A

    Dear Richard Antony,
    The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
    Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
    Like wise there is lots of importance of versioning Workflow.
    The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
    Hope this will give you a clear picture.
    Regards,
    Chandrashekhar.

  • Oracle Workflow Builder and Oracle 9i

    The Oracle 9i Client CD does not include the Workflow Builder and MAPI Mailer, however the Oracle 9i Server CD NT does under the Client Component option.
    Customers on other platforms need access to the builder, so patch 2053572 has been released to remedy this situation.
    Customers should not install any other version of the Oracle Workflow Builder into a 9i Oracle Home. Previous releases of the Workflow require and 8i Oracle Home.
    See Metalink Note 161304.1 for more details.

    Got around the error by not running the installer (setup.exe) that came with the workflow code tree. I ran my Oracle Installer and pointed it at the appropriate place in the workflow code tree, and that worked. The Net8 Config Assistant setup process didn't complete, but I just copied my 9i tnsnames.ora file into the workflow network\admin directory and everything worked fine.

  • Workflow Builder with R12- configuration

    Need to install Workflow builder on client PC's to access R12 (Linux) for a training environment.
    I have gone through the documents in the forum, and on metalink, but needed clarification on the following:
    Is there any additional* configuration required on the R12 installation (i.e in the R12 workflow cartridge) over and above the installation..
    before Workflow builder can be used to create and edit workflow definitions?
    Any advice would be appreciated.. thanks

    Hi user;
    Please check:
    How to run Oracle Workflow Builder on OEL5 Server
    Also check:
    How to Download Workflow Builder for Oracle Applications 12.0.x? [ID 847797.1]
    How To Obtain Oracle Workflow Builder [ID 401288.1]
    Hope it helps
    Regard
    Helios

  • Problems in workflow builder

    Hi,
    I am facing problems in workflow builder and tasks while i am creating a custom workflow template.
    1) binding between task and workflow does not work. One of the container element value is getting passed from the task to the workflow while others are not getting passed. All these are part of the same binding.
    2) the workflow container elements are not available in the steps of the workflow. eg, in a condition step i am comparing two container elements, it is failing, its taking balnk values. also in send mail step i have included a continer elements in description. i see nothing there. means the container elements are blank for the send mail step.
    3) the binding betw the task and the method simple dissappears (thrd Binding betw task and method dissappears !! )
    kindly provide and advice or suggestions
    thank you very much
    -r

    Hi,
    I have sent a mail to the email address mentioned in your profile. I will try to find a place in sdn where i cud upload the screen shots.
    Yes it look as though the data is not available at the time of the condition step. But how could that be as it is the business object attribute and that has to be available at any point in the workflow  for all the workflow steps. I have used it several times in other workflow templates.
    I have done the following
    created new workflow template and put bus2091-created as start event
    extended business object and added several new attributes and defined each attribute. some of them are virtual and some are database attribute. And while coding the definition of the virtual attribute, which is pretty complex logic, i have used the database attributes of the same business object.
    the first step in the workflow was activity step . in which i called BO method to get soem data. eg frist name, last name of the creator. i did not export anything to the method, only imported the first name, last name because inside the method i use object-_essr-ernam to get the creator user id and then i find the names of this user id
    the second step is the condtion step where i check the attribute of the business object. the attribute which are database attributes are available. but those which are virtual attributes are totally blank.
    when i trigger the workflow, the condition result always fails as there are no values available. and in swi1 i can see that those values are very much there in the business object instance.
    is it so that these attributes are populated later than the time when condition step is called ? if yes, then why does the workflow processing reach the condition step ? it should first process all the initial steps, ie completely instantiate the business object and then it should start the steps of workflow. am i right ?
    is it because i have used the database attributes of the BO in order to build logic in the definition of the virtual attributes ? for eg. instead of using object-_essr-createdby, should i use only object-key-entrysheet. then write select statement on essr table for whatever entrysheet data i want and then carry on with my coding for the virtual attribute ??
    thank you
    r

  • Where do I find workflow builder 2.6.4 for installation?

    Hi all,
    I've just installed 10g release 2 for windows including Oracle Workflow 2.6.4 from the companion CD and also the client software. But I'm missing the workflow builder. Where can I find it?
    Thanks
    Matthias

    Hi,
    Mathias, I'm using Oracle Workflow 2.6.3.
    AFAIK Oracle Workflow Builder is installed using Oracle Database10g in Client option.
    Maybe you didn't notice or didn't giv check at the Workflow Builder when you installed the Client version. Make sure when you installed it, you should expand some trees in the installation product and give check to the product you want to install.
    I'm sorry gladnn, but I cannot give any help for your problem.
    Regards,
    Buntoro

  • OSD - Build and Capture - Client reinstall

    Hey guys -
    In our current "reference" image, we have Office, .NET framework, and security updates integrated into the WIM.  We then advertise the WIM, and add more applications, the SCCM client itself (which doesn't exist in the WIM) and any new updates.
    I've gotten our first "Build and Capture" using OSD itself - which *has* the SCCM client already in the image.
    However, OSD still wants to re-install the client during the Setup Windows and ConfigMgr action.
    1) Is this normal to re-install the client even if a perfectly good client is already there in the WIM?
    2) Any way to avoid this?  it's just a waste of time.  In the old days we'd just re-generate GUIDs which took a few seconds versus a few minutes.
    Thanks!

    This is expected behaivor... This is how the product was designed...
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • How to build and use Oracle workflow with Content DB

    Hi All,
    do we have any documentation that assist us in developing and applying the Oracle workflow (Developed using the Oracle Workflow builder) to the contentDB folder.
    Is there an alternative other than using the BPEL or oracle workflow builder for developing the workflows that work with Content DB.
    Thanks
    Krrish

    Hi Krrish
    From a custom workflow perspective, Content DB uses a loose coupling mechanism based on advanced queue messages to integrate workflow engines.
    CDB has no specific BPEL code/support - but rather requires the workflow engine to be able to dequeue a message from the outbound queue (IFS_BPEL_OUT), and return an approve/reject response queue message on the inbound queue (IFS_BPEL_IN). As Oracle BPEL supports advanced queue tables, it can thus be leveraged from Content DB.
    Hence, you can potentially use any workflow mechanism/tool you like, so long as that it is able to obtain a message from the outbound queue, and respond on the inbound queue.
    As far as Oracle Worflow is concerned, we don't ship with any documentation/samples to describe/develop its workflow processes. Nor do we support replacing the out-of-box Oracle Workflows.
    cheers
    Matt.

  • OAI and Workflow - Setting Attributes to use in Notifications

    Does anyone know how I go about getting at attributes in a message that goes through the Workflow Adapter?
    What I am trying to do is to create a notification, which is more meaningful by adding some of the details I've passed through in the PARAMETER_LIST attributes of the Workflow message.
    Any ideas?
    Ian

    Kavitha,
    I've managed to do it, but using a simpler method (I think).
    In iStudio
    My Common View contains the attributes as follows:-
    EMPLOYEE_NUMBER (String)
    START_DATE (Date)
    LAST_NAME (String) and
    FIRST_NAME (String)
    My subscribing Workflow Event maps these Common View values into the PARAMETER_LIST array in the Workflow message. The mappings are as follows:-
    PARAMETER_LIST[v1].NAME=SetConstant (EMPLOYEE_NUMBER, "EMPLOYEE_NUMBER")
    PARAMETER_LIST[v1].VALUE=CopyFields (EMPLOYEE_NUMBER)
    PARAMETER_LIST[v2].NAME=SetConstant (START_DATE, "START_DATE")
    PARAMETER_LIST[v2].VALUE=CopyFields (START_DATE)
    PARAMETER_LIST[v3].NAME=SetConstant (LAST_NAME, "LAST_NAME")
    PARAMETER_LIST[v3].VALUE=CopyFields (LAST_NAME)
    PARAMETER_LIST[v4].NAME=SetConstant (FIRST_NAME, "FIRST_NAME")
    PARAMETER_LIST[v4].VALUE=CopyFields (FIRST_NAME)
    I also created the publishing Workflow Event. To get the values out of the PARAMETER_LIST array, I simply used the 'TrueConditionalCopy' transformation. For example,
    EMPLOYEE_NUMBER=TrueConditionalCopy (PARAMETER_LIST[v1].NAME, PARAMETER_LIST[v1].VALUE, "EMPLOYEE_NUMBER")
    In Workflow Builder
    I created 4 additional ATTRIBUTES in the Workflow:-
    EMPLOYEE_NUMBER_ATT (Type - Text)
    START_DATE_ATT (Type - Text)
    LAST_NAME_ATT (Type - Text) and
    FIRST_NAME_ATT (Type - Text)
    I then created my MESSAGE (Called 'Approve Update Employee'). I added 4 new MESSAGE ATTRIBUTES to this message:-
    EMPLOYEE_NUMBER (Type - Text, Default Type - Item Attribute, Value - EMPLOYEE_NUMBER_ATT)
    START_DATE (Type - Text, Default Type - Item Attribute, Value - START_DATE_ATT)
    LAST_NAME (Type - Text, Default Type - Item Attribute, Value - LAST_NAME_ATT)
    FIRST_NAME (Type - Text, Default Type - Item Attribute, Value - FIRST_NAME_ATT)
    In the Message Body I used the '&EMPLOYEE_NUMBER' notation to bring back the values into the message when the Workflow runs. For example, "This message has been created to tell you that Employee &EMPLOYEE_NUMBER has changed some details. Details are First Name is &FIRST_NAME, Last Name is &LAST_NAME and their start date is &START_DATE. Please Approve or Reject this change by using the buttons below."
    In the Workflow Diagram
    After the START node (Subscribe Maintain_Employees.Update_Employees) I added a series (4 in all) of "Get Event Property" Standard Workflow functions (GETEVENTPROPERTY) in order to find out the values from my parameter list.
    As an example, here is the one I did to get the Employee Number.
    In the 'Node Attributes' tag (when you double-click on the "Get Event Property") set the values as follows:-
    Name = Event, Type = Item Attribute, Value = OAI Message
    Name = Property, Type = Constant, Value = Event Parameter
    Name = Event Parameter, Type = Constant, Value = EMPLOYEE_NUMBER
    Name = Item Attribute, Type = Constant, Value = EMPLOYEE_NUMBER_ATT
    (Note that the 'Event Parameter' is the name you set it to when you did the SetConstant mapping i.e. EMPLOYEE_NUMBER. The 'Item Attribute' is the target ATTRIBUTE that the result of calling the GETEVENTPROPERTY will be put.)
    I finished off the Workflow by creating a NOTIFICATION called 'Update Employee Notification' which uses the 'Approve Update Employee' message, and added the Result Type of 'Approval'.
    If the message is APPROVED, then the workflow calls the Publish Event (END node type), if REJECTED then the Workflow goes to an END node (and not processed any further).
    My Workflow looks like this.
    START (Subscribe Maintain_Employees.Update_Employees)
    GETEVENTPROPERTY (to get EMPLOYEE_NUMBER_ATT value)
    GETEVENTPROPERTY (to get START_DATE_ATT value)
    GETEVENTPROPERTY (to get LAST_NAME_ATT value)
    GETEVENTPROPERTY (to get FIRST_NAME_ATT value)
    Update Employee Notification --> REJECTED --> END
    APPROVED
    END (Publish Maintain_Employees.Update_Employee)
    I'm not sure whether this is a good approach or not. The biggest upside is that I didn't have to do any additional coding. I only used standard OAI and Workflow functionality.
    Thanks again for your help.
    Ian

  • After Flash Catalyst discontinued - What Workflow Designer / Developper to use? and how skin compone

    Hi,
    Now  that Flash Catalyst is discontinued before being totally usable,
    I used Flash Catalyst for skinning components and prototyping design of App.
    So i wonder how experienced people do that without Flash Catalyst?
    And more im asking to Adobe the same questions. What do you propose to do now what Flash catalyst helped to do until now?
    how do you skin components?
    how do you work with designers to get their App Pages designs?
    in a word, what is the WorkFlow?
    Thanks

    I couldn't agree more with you that developers need a solid WYSIWYG tool, and Catalyst was Adobe's closest rival to Blend. It had much more potential than the amount of attention it received. Adobe was very foolish pulling the plug on it, not to mention all their other recent decisions related to the Flash Platform.
    My point was that with all of the importing and exporting capabilities of Illustrator, Photoshop, Flash Professional, and especially Fireworks, you already have all of the capabilities of Flash Catalyst, at least in regards to making creative assets available to the Flex framework. That was the sole purpose of Catalyst- to bridge the gap between Adobe's design applications and Flex. If you weren't concerned with Flex, Flash Catalyst would be of no use, even if it were still in development. Exporting a Catalyst project to Flash Professional or HTML was never on it's roadmap, although I'm sure I'm not the first person who thought of those possibilities.
    Catalyst, simply put, was the FXG editor which Flash Builder's design mode was not. For example, you could not draw a rectangle using Builder's design mode. With Catalyst CS5.5, it allowed you to directly assign FXG assets to MXML skins for ten of the nineteen Spark components which use the MXML skin architecture. This was a huge limitition, and espeically obvious with the new roundtripping feature, because using any of the non-supported components could easily break the connection between Builder & Catalyst. Honestly, myself and many of the Adobe engineers I talked to on the Flash Builder team, still do not understand why Catalyst wasn't merged into Flash Builder in the first place.
    Perhaps it's not as useful out of context, but I compiled a presentation a few months ago for my Adobe user group, titled "Creative & Production Harmony": https://acrobat.com/#d=jNyu*qRjpF68tbl*8lCiTw&x=s
    Basically what it outlined, was when to use Catalyst, and when you are better off exporting straight from the other design apps. My conclusion, was that you're generally better off designing your assets in the app you're comfortable with. That IS your WYSIWYG editor, to the precision of 1px. It was also a future proof answer since Catalyst was discontinued and many of the other Flex related workflows have evaporated. The main loss behind discontinuing Catalyst, were its states, timeline, and visual editing of FXG less commonly preserved when exporting from the other apps.
    A workflow example for a project I recently used Catalyst with, http://disneycruiseadventure.com/ was to open the PSD provided inside of Photoshop, launch Catalyst, draw a shape (or copy/paste in a vector smart object from Illustrator), and use it's properties panel to match the Photoshop layer styles. This basically the climax of the day, because the rest of it was all spent manually editing code in Builder (and often fixing a lot of the crap code Catalyst spit out). For advanced use of graphics, we relied heavily on the Flex Component Kit, which basically lets you work with any MovieClip inside of Flex or even insert Flex components into a Flash Professional container. The integration between Flex & Flash Pro is most commonly overlooked, which is sad because it still offers the very most design freedom for Flex and has been around long before Catalyst.
    In my personal project, my workflow heavily involves Fireworks. It's exporting capabilities are unparralled by any of the other Adobe design apps. You can design with the 1px precision you are after, and almost always preserve that precision after exporting to Flex 3, FXG, and even CSS. Speaking of CSS, now you can export to CSS3 and jQuery mobile themes using Fireworks. If I had a choice between Fireworks and Catalyst, I would take Fireworks without any question. If you're looking for another workflow, consider the idea of taking HTML/CSS exported by Fireworks and opening it inside of Adobe Edge for adding animation and interactivity. Then do your final editing with Dreamweaver, or skip the Edge step if you don't need it.

  • Can I used Dreamweaver CS5.5 to learn to build and style a web page? I see the CC version but I want to use the earlier version. THx

    Can I used Dreamweaver CS5.5 to learn to build and style a web page? I see the CC version but I want to use the earlier version. THx

    you can use the 30 trial and/or purchase from a 3rd party.
    for the trial:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Error: The Task has failed to load on Execute Package Task using TFS Build and MSBuild.exe on dedicated Build Machine.

    I'm trying to automate my building and deployment of SSIS packages using TFS build definitionss in conjunction with MSBuild.exe on a separate build machine.
    I have successfully built and deployed my projects but receive the following error:
    Error: Failed to load task "etl_UWP_Stage_tstg_7_Large",type "".  The contact information for this task is "Microsoft Corporation: Microsoft SQL Server .... "
    This error happens at runtime as well as if I perform a "Validate..." on the SSIS Catalog on the server.
    This only occurs when trying to execute a package that contains an Execute Package Task.  Any other packages that are doing the actual work are working just fine.
    In addition, when I do the MSBuild from my developer machine with the same deployment process everything works fine, even the Execute Package Task.
    I can even open up the project on the build machine in VS2012, rebuild all, then deploy and everything works fine.
    Some things I've considered/verified:
    1) Visual Studio 2012 and Visual Studio Data Tools 2012 are both on the build machine and my local machine.
    2) The .NET version being used by VS2012 is the same on the build machine and my local machine.
    3) I find it suspicious that the "Type" referenced in the error above is blank...but not sure where to go with that.
    4) Obvious difference is that during the TFS Build and Deploy on the build machine, everything is running under the TFS Service account, rather than my account...once again...not sure where to go with this, but it is a significant difference.
    Has anyone had similar issues or have any thoughts on things to try?
    Thanks,
    Jason

    Not sure why I couldn't find this answer in my earlier searches...
    But this thread solved it for me:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
    Essentially I had to install SSIS on the build machine so that the 64-bit version for
    ExecPackageTask.dll, was available.  I did this from the original media CD selection Integration Services as a feature.
    Hope this helps someone in the future.

  • I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

    I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

    What is showing on the screen of the iPhone?
    Does iTunes say the iPhone is in recovery mode?

  • ITunes will not open my music CDs when I place them in the DVD drive. I am using Win 7 and latest download of iTunes. Have tried uninstalling and reinstalling with AV software turned off. No luck. Cannot upload my music CDs to iTunes library. Any ideas?

    Using Win 7 and latest download of iTunes, the software will not recognize my music CDs when inserted in my DVD drive. I put a CD in the drive and nothing happens. iTunes does not have a "start" button, or some menu option to tell it to begin copying music to the library, so it just sits there. When I first installed iTunes, it would open the CDs, but I would get an error message after the first track started to transfer. Now, after a coupel uninstalls, disc cleanup, etc., nothing happens when I insert the CD. I am lost here and about to sell my new Ipod Classic because it is useless to me. Maybe I'm just too old to own something like this? Any (serious) suggestions would be appreciated.

    In iTunes, do Store->View my AppleID
    Click "Deuthorize ALL"
    Then, on any computers you still have, do Store->Authorize this computer.  If there are less than 5, you will have no problem.
    You can only do "deauthorize all" once a year, so in the future, if you ever throw a computer away, remember do to "Store->Deauthorize this computer" first.

Maybe you are looking for