Workflow builder forum

1)Is there any forum for workflow builder.
2) How would i download workflow builder.
3) What is the use of workflow builder. if most of the workflows already embeded in apps. is workflow builder use for editing workflows.

XAVER wrote:
Hans Forbrich
Thanks. i got something from your post. let me find the work flow builder. still unable to find.I understand it's pretty difficult to find things on the page, Try this:
1) At the top of the page is a link titled 'Forum Home'. Click on that.
Or you could find the place where you type toward the top of the browser and enter http://forums.oracle.com
2) New page shows up. Assuming you are using Internet Explorer or Firefox, enter Ctrl+F (Hold Control key and type 'F')
3) Enter the word 'Database' in the search box and (IE only) hit enter.
4) Look just a few lines below the highlighted word Database and notice a link titled 'More...'
- below, not above
- don't go too far below, and skip the first one
- it's the line with text directly under the words 'Database - Upgrade'
5) Click on that 'More...' link.
6) New page shows up. Perform a new search using Ctrl+F (see above on how to do this)
7) Enter the word 'Workflow' in the search box and hit (if using Internet Explorer) enter
8) The 'Workflow' link should now be highlighted. Click on that link to access the forum.
I know it's complicated. Let me kow if it works for you.
I've also got instructions how to find the Documentation, Download, Samples and Tutorials from the http://otn.oracle.com site.
If you need a break, you could enjoy http://www.deadtroll.com/index2.html?/video/helldeskcable.html~content

Similar Messages

  • Error while installing oracle workflow builder 2.6.3.4

    I got an Error while installing the workflow builder
    the error was while setting the environment variable "PATH"
    can't set the environment variable value as it's more than 1023
    i made ignore to this error and continue the setup
    is that error may affect the workflwo builder to run or it dosen't affect it
    best regards
    Edited by: Miro Graphic on Jul 5, 2011 2:35 PM

    Hi;
    This forum site related wiht Oracle database installation.I suggest,close your issue here as answered than move your issue Forum Home » Database » Workflow* which you can get more quick response
    Regard
    Helios

  • Error while connecting to workflow builder 2.6.3

    Hi,
    I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-01403: no data found
    . SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
    In the previous threads when I searched for the same issue, I found that if
    select value from v$nls_parameters
    where parameter='NLS_CHARACTERSET';
    returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
    But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
    Please help me. I tried a lot. Any type of help will be highly appreciated.
    Thanks,
    Sumir

    Hi;
    This forum site related wiht Oracle database installation.I suggest,close your issue here as answered than move your issue Forum Home » Database » Workflow* which you can get more quick response
    Regard
    Helios

  • Information on Globalization of Workflow Builder GUI

    I am trying to determine if the Oracle Workflow builder application can display non-English characters in its menus, labels, dialogs, etc. Is there central site that describes the level of internationalization for this and other Oracle products? I have already looked in the "Products > Database > Oracle Workflow" forum and post a request there. Any point of contact would be helpful. Thank You.

    Hi Srinivas,
    Firstly when you create the container element for the task set is as an import parameter ( Double click on the container element-> Properties (Tab)-> Import(Field) ). Save the task. In SWDD select the activity. Put in the task and Click on Binding button. You will get a pop up showing all the workflow elements and the task elements. Map the workflow element to the task element here. Save and activate the workflow.
    In SWO1 open the method for the business object. Click on parameters button and add an import parameter of the same data type as the task container element. In the program add the following code:
    Data: newvariable type datatype
    swc_get_element container 'NEWVARIABLE' newvariable.
    Open the task definition and click on method binding. Map the task container element to the method input parameter.
    After these steps you should be able to use the new variable in your code.
    Regards
    Bhooma

  • Installing Workflow Builder

    Hi I am having problems locating the install files for Workflow Builder on windows.
    I understand it is part of the dbase client install however it doesnt seem to be available on OTN downloads for windows, can anyone point me in the right direction?
    Thanks
    Keith

    Try searching the forums for "download" and "builder"!!
    You'll find Re: Where Can I Get Oracle Workflow Builder? which leads you here.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://thoughts.workflowfaq.com ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • Create Workflow Builder On EBS

    Hi all
    I created a Workflow to approve invoice.I create package and procedure 'approve_invoice' to change status of invoice.In the procedure,i use function update:
    UPDATE PN_LEASE_DETAILS_ALL AIA
    SET AIA.Attribute13 = 'APPROVED'
    WHERE AIA.LEASE_ID = l_invoice_id;
    This procedure run normaly and change status of invoice become 'APPROVED'
    But when i change function update :
    UPDATE PN_LEASES_ALL
    SET LEASE_STATUS = 'AA'
    WHERE LEASE_ID = l_invoice_id;
    It can't run into procedure approve_invoice and not change status of invoice
    I don't know how to fix this problem
    Who can help me?Please
    Thanks all

    Where can I download workflow builder for Oracle eBs r12.1.3?oracle workflow builder
    oracle workflow builder
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Builder+AND+Download&objID=c3&dateRange=last90days&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Builder+AND+Download&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Does our DBA also install something on the middle-tier, our is this just
    pre-installed with Oracle installation?You do not need to install or configure anything on the server to use Workflow builder.
    Thanks,
    Hussein

  • Always error when try to save my item type on workflow builder

    Dear All,
    I'm created a simple workflow. There is a notification with Result Type = Approval (Standard). Every I tried to save, workflow builder show a error message below:
    WFDESV_FAIL COUNT=1
    WFACTV_FAIL OPERATION=SAVE NAME=FIF_NOTIFY_APPROVER1_NTF TYPE=FIF
    WFACTV_MESSAGE_RESULT RESULT=WFSTD_APPROVAL
    What does it mean? I've tried to change Result Type with another standard Lookup Type (such as Boolean or another). But the error message still coming. How do I fix it?
    Thank you,
    Agas

    Hi,
    The first thing that is wrong is that your configuration is not finding the messages correctly, so that you get a meaningful message. Check that the keys in the registry for Workflow (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Workflow have been created correctly - there should be a Languages key and then ENG with an entry for Help, Message and TemplateDir which point to your Workflow home. Once that is set up, then you should at least get a meaningful message :)
    There are two possible problems here, but I haven't had chance to look in the messages file to see which one it is. Either the notification does not have a performer assigned to it when used in the process, or you have not modelled a transition for all available options - you need to model all responses, or use the "default" transition to capture those that you have not explicitly included.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • Workflow Builder with R12- configuration

    Need to install Workflow builder on client PC's to access R12 (Linux) for a training environment.
    I have gone through the documents in the forum, and on metalink, but needed clarification on the following:
    Is there any additional* configuration required on the R12 installation (i.e in the R12 workflow cartridge) over and above the installation..
    before Workflow builder can be used to create and edit workflow definitions?
    Any advice would be appreciated.. thanks

    Hi user;
    Please check:
    How to run Oracle Workflow Builder on OEL5 Server
    Also check:
    How to Download Workflow Builder for Oracle Applications 12.0.x? [ID 847797.1]
    How To Obtain Oracle Workflow Builder [ID 401288.1]
    Hope it helps
    Regard
    Helios

  • Task locked by Workflow Builder

    Hi all - hoping someone has run across this.  i'm surprised I didn't find anything in the forums on this.  I created a workflow, but realized I didn't name some of the task container elements in a few steps properly.  So, in attempting to go into the send mail steps to rename the task container elements, I get the following:
    "Task TS99900143 locked by Workflow Builder"
    I'm unable to edit/rename/or even add new task container elements.  However, I am able to make changes to other parts of the workflow (i.e. workflow container elements, etc).
    Any idea what I need to do?  I logged out, logged back in to see if it would get unlocked.  I had this problem yesterday as well, so I thought maybe even overnight something would get unlocked, but that wasn't the case.
    Thanks,
    Steve

    >
    purvesh patel wrote:
    I think we should ask moderator about that.
    OK, let's get one thing straight: [Moderators|http://en.wikipedia.org/wiki/Forum_moderator] are folks who look after the forum and make sure everyone plays by the rules and so forth - a bit like a referee at a sports match.
    We do not represent official statements from SAP, in fact not all moderators even work for SAP. If someone with an SAP logo next to their name says something that is different...
    Now we've got that out the way, no this is not a bug. The sendmail step is just a 'special' step in the workflow builder that generates a regular SELFITEM.SENDTASKDESCRIPTION in background based on the info you supply. Since the WF builder maintains the task for you, it locks it so that the task and the WF builder don't get out of synch.
    Aside from PFTC (be aware of sync issues mentioned above), you can of course also create a sendmail step manually by creating a task based on SELFITEM.SENDTASKDESCRIPTION. It will appear as a regular activity step and not have the mail icon, and it won't be locked. In some cases this is better because you have more control over the details.
    Cheers,
    Mike

  • Diff: Version on workflow builder and Maintain Active Plan version on SWU3

    Group,
    Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
    Thanks in advance !
    Richard A

    Dear Richard Antony,
    The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
    Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
    Like wise there is lots of importance of versioning Workflow.
    The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
    Hope this will give you a clear picture.
    Regards,
    Chandrashekhar.

  • Error while connecting to workflow builder after installation...first time!

    Hi,
    I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-01403: no data found
    . SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
    In the previous threads when I searched for the same issue, I found that if
    select value from v$nls_parameters
    where parameter='NLS_CHARACTERSET';
    returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
    But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
    Please help me. I tried a lot. Any type of help will be highly appreciated.
    Thanks,
    Sumir

    This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
    HTH
    Srini

  • Customized notification message template in Workflow Builder for iExpense

    Hi Gurus!
    I have a few requirements to change the notification format of the AME Expense Report Approval Message and one of which is to add a due date of the notification in the subject line of the email. So i have created a new message template, added in some attributes and point the notification to it. It works but in the email body it is missing some sections like the instruction text and the Previously Submitted Expenses section. The new message template has all attributes from the old message template so i'm expecting it to behave exactly the same.
    We're on Oracle r12 and i use Oracle Workflow Builder 2.6.3.5.
    Can you please help?
    Thanks in advance.

    Hi Patricia,
    For
    '358: Activity result code 'RESET' has no transition defined for it. All valid result codes must be modeled with specific transitions or a <Default> transition.',
    you may have a function step defined in your workflow which could have a result type like 'Yes/No' but you may have defined the next step for the result type 'Yes' but not for 'No'. so you have to complete the flow for all of the result type of that function step.
    for,
    '383: Notification activity must be assigned a performer when used in a process.'
    Open up the properties dialog of the notification in your process and click on the 'Node' tab, there at then end you can find a property called 'Performer' assign the following,
    Type->Item Attribute
    Value->Send to Role (or) Send to Email.
    I guess this is a late response, but i just fixed these problem for my workflow and hence found your query !!
    ~ Vivek MS

  • Oracle Workflow Builder and Oracle 9i

    The Oracle 9i Client CD does not include the Workflow Builder and MAPI Mailer, however the Oracle 9i Server CD NT does under the Client Component option.
    Customers on other platforms need access to the builder, so patch 2053572 has been released to remedy this situation.
    Customers should not install any other version of the Oracle Workflow Builder into a 9i Oracle Home. Previous releases of the Workflow require and 8i Oracle Home.
    See Metalink Note 161304.1 for more details.

    Got around the error by not running the installer (setup.exe) that came with the workflow code tree. I ran my Oracle Installer and pointed it at the appropriate place in the workflow code tree, and that worked. The Net8 Config Assistant setup process didn't complete, but I just copied my 9i tnsnames.ora file into the workflow network\admin directory and everything worked fine.

  • Problem with oracle workflow builder 2.6.3.5

    Hello
    I have installed oracle workflow server 2.6.3 on a oracle 10G 10.2.0.1 in Red Hat linux Enterprise 4L and I have Oracle workflow builder 2.6.3.5 on Microsoft Windows XP Service pack 2
    I have the following error when i try to save or open and itemtype from the database
    1005: Language is not populated, please refers to Workflow documentation for steps on populating a language.
    How can i solve this i've alredy changed the NLS_LANG to match with the server
    In the server the language is set to American and in the NLS_LANG i have set like this AMERICAN_AMERICA.US7ASCII
    hope you can help me as soon as posible
    Andres

    Hi Matt thanks for the answer
    i've already seen the wf_languages table and i have the following:
    CODE NLS_CODESET I
    AR AR8ISO8859P6 N
    BG CL8ISO8859P5 N
    CA WE8ISO8859P1 N
    CS EE8ISO8859P2 N
    D WE8ISO8859P1 N
    DK WE8ISO8859P1 N
    E WE8ISO8859P1 N
    EG AR8ISO8859P6 N
    EL EL8ISO8859P7 N
    ESA WE8ISO8859P1 N
    F WE8ISO8859P1 N
    CODE NLS_CODESET I
    FRC WE8ISO8859P1 N
    GB WE8ISO8859P1 N
    HR EE8ISO8859P2 N
    HU EE8ISO8859P2 N
    I WE8ISO8859P1 N
    IS WE8ISO8859P1 N
    IW IW8ISO8859P8 N
    JA JA16EUC N
    KO KO16KSC5601 N
    LT NEE8ISO8859P4 N
    N WE8ISO8859P1 N
    CODE NLS_CODESET I
    NL WE8ISO8859P1 N
    PL EE8ISO8859P2 N
    PT WE8ISO8859P1 N
    PTB WE8ISO8859P1 N
    RO EE8ISO8859P2 N
    RU CL8ISO8859P5 N
    S WE8ISO8859P1 N
    SF WE8ISO8859P1 N
    SK EE8ISO8859P2 N
    SL EE8ISO8859P2 N
    TH TH8TISASCII N
    CODE NLS_CODESET I
    TR WE8ISO8859P9 N
    US US7ASCII Y
    ZHS ZHS16CGB231280 N
    ZHT ZHT16BIG5 N
    37 rows selected.
    as you can see i have installed the american_america.us7ascii
    also the nls_lang key in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_oracleas1
    is set to AMERICAN_AMERICA.US7ASCII
    I don't know wich is the problem with this
    thank you again

  • 601 SAP Business Workflow - Build and Use

    Hello,
    I am working in ABAP for last 6-7 years. Due to project need planinng to take BIT 601 SAP Business Workflow - Build and Use  class.
    Please suggest if this class is good  to get started in SAP workflow. Pre-requisite for this class is BIT 600. I am not taking that class. Can I do self study and pick it up?
    Please suggest how I can get ready for workflow.
    Thanks,
    AP

    Hi,
    Org structure needs to be setup by HR, but you can set up org structure yourself. Its not a big deal. 601 will go thorough this process. Also you can have workflows without org structure.
    Go through this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70b074ac-fa1b-2a10-1587-bd084347fc56
    On help.sap.com, there is a demo for an absence request workflow. If you go through them, it should give you an idea of all the basic tcodes including the creation of a HR org structure, workflow build etc.

Maybe you are looking for

  • PLEASE HELP - Panasonic DV captured, audio goes out of sync

    I'm capturing an hour of DV from a Panasonic PV-GS500, using Capture Now. Initially the audio and video appear to be in sync, but when I view the latter portion of the hour, the audio and video are markedly out of sync. This has occurred with several

  • Add new  fonts in IC Webclient

    Hello everyone, Anyone knows if it's possible to add/configure new fonts, to be available IC Webclient (HTML e-mail editor)? Thanks and regards

  • Embedding MS Accessibility controls into pdf document.

    I have a pdf form running fine in a server with Adobe Proffesional 8.0,  We need to update to Adobe Pro 9.0 or Adobe Pro 10.  The app is not performing well in those higer versions of Adobe Pro because we need to capture data from a pop up window to

  • Creative Zen 32 GB - disconnect when battery is f

    Hello! I have bought the Creative Zen 32 GB and after i connected it to my USB-Port and loaded fully the first time, it abort the connection to the PC every few minutes and provokes the Automatic Execution window ( like described in this thread: "Cre

  • Printing check signatures through crystal / xml publisher

    We have our signatures burned into a SIMM on the printer. The signatures get activated by an escape sequence. Is there a way of sending these escape sequences via crystal. On another note has anyone printed checks using xml publisher using the aforem