Workflow Builder launching error from PFTC transaction.

Hi
MY PROBLEM:
I am getting an error message when I click on the WORKFLOW BUILDER button from the PFTC transaction to go into the workflow definition screen. When I click the WORKFLOW BUILDER button the system throws the error and it remains on the same screen and does not take me to the workflow builder screen.
I am getting the following error message. Any idea what I need to do to avoid seeing this error message.
Line/object not integrated in navigation.
Message no. 5W010
ALTERNATIVE OPTION:
However I am able to go to the workflow builder screen from the menu GOTO > WORKFLOW BUILDER> CURRENT VERSION(F7).
Any idea why I am facing this problem. Is there anything I need to activate in my system?
I am on ECC 5.0 - IDES SYSTEM.
Cheers
Chky

Hi
Thanks for your reply. I am using a IDES system. I looked into OSS note for this issue but could not find any relevant notes for this.
I will search once again.
Cheers
Chky

Similar Messages

  • Launch error from plugin

    whenever i open safari 5 now i get this error
    "Safari 5.0 (v6533.16) has not been tested with the plugin SafariBlockLeopard.bundle (null) (v2.2r1). As a precaution, it has not been loaded. Please contact the plugin developer for further information."
    So i removed the plugin from the input managers folder where it says to and it still happens.
    So far i've tried, restarting the machine
    uninstalling safari and its plist files with app zapper
    and i still get the error. Any ideas on how i can get this nag screen to go away? It happens every time i open safari 5.
    Message was edited by: miskywhisky

    I really need help. I am not as tech savvy as some Mac owners. I downloaded Safari 5.0 and how get this message every time
    " Failed to load Fast Browser Search PlugIn plugin. *-[BrowserWindowController current WebView] unrecognized selector sent to instance 0x7adc70
    What does all this mean and how can I fix it. I get hung up every time I go on the internet and have to Force Quit.
    Thanks.

  • Error while installing oracle workflow builder 2.6.3.4

    I got an Error while installing the workflow builder
    the error was while setting the environment variable "PATH"
    can't set the environment variable value as it's more than 1023
    i made ignore to this error and continue the setup
    is that error may affect the workflwo builder to run or it dosen't affect it
    best regards
    Edited by: Miro Graphic on Jul 5, 2011 2:35 PM

    Hi;
    This forum site related wiht Oracle database installation.I suggest,close your issue here as answered than move your issue Forum Home » Database » Workflow* which you can get more quick response
    Regard
    Helios

  • Forms Developer & Workflow Builder

    All,
    Can any one tell me the patch number to download the Forms 10G developer & Workflow Builder for 12i from Metalink.
    Thanks
    -

    Can any one tell me the patch number to download the Forms 10G developer & Workflow Builder for 12i from Metalink.Oracle Developer Suite/Application Server 10g Release 2 (10.1.2.0.2) Downloads
    http://www.oracle.com/technology/software/products/forms/index.html
    Oracle Workflow Client Downloads
    http://www.oracle.com/technology/software/products/workflow/htdocs/winclient.html

  • Workflow Restart Error from transaction SWPR

    Hi workflow Gurus,
    I am facing problem restarting workflow from transaction SWPR. Instead of restarting workflow I am getting an error message as “unable to start subflow (ID: XYZ, node: abc)”.
    How can I restart the workflow?
    Regards,
    Abhishek.

    The problem wad caused by mistake in workflow template WS75100021. After task 'Create test log' there is a loop. The end condition of the loop is 'test log is Submitted or Validated'. But the test log can have also status 'Closed' (The tester created the test log and close it immediately). It cause endless loop.
    You can proceed following manual steps.
    1. Go to transaction SWDD (Workflow Builder).
    2. Open workflow template WS75100021.
    3. Open loop number 000177
    4. Change the condition this way
    &FOPC_CASEL.STATUS& = IFO09 or
    &FOPC_CASEL.STATUS& = IFO10 or
    &FOPC_CASEL.STATUS& = IFO07
    5. Activate the workflow template
    if it helpful rewards points are appreciated

  • Error while connecting to workflow builder after installation...first time!

    Hi,
    I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-01403: no data found
    . SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
    In the previous threads when I searched for the same issue, I found that if
    select value from v$nls_parameters
    where parameter='NLS_CHARACTERSET';
    returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
    But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
    Please help me. I tried a lot. Any type of help will be highly appreciated.
    Thanks,
    Sumir

    This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
    HTH
    Srini

  • Error while connecting to workflow builder 2.6.3

    Hi,
    I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-01403: no data found
    . SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
    In the previous threads when I searched for the same issue, I found that if
    select value from v$nls_parameters
    where parameter='NLS_CHARACTERSET';
    returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
    But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
    Please help me. I tried a lot. Any type of help will be highly appreciated.
    Thanks,
    Sumir

    Hi;
    This forum site related wiht Oracle database installation.I suggest,close your issue here as answered than move your issue Forum Home » Database » Workflow* which you can get more quick response
    Regard
    Helios

  • Oracle Workflow Builder Client Installation Error

    Hi,
    I am trying to install Oracle Workflow Builder Client 2.6.3.5.
    After starting the installation I am getting error as cannot create C:\Documents....\oui\Autorun.inf followed by Java Virtual Machine Launcher Window saying Fatal exception occured. program will exit.
    Please help me.
    Thanks,
    Aditya
    Edited by: Adit102 on Sep 5, 2012 9:58 AM

    I have not seen this one .... Ensure that the install directory as well as any init directory use the conventional/old 8 character name, like D:\Work\Oracle. No spaces. I say so because it is suspicious that the error refers to C:\Documents....\
    Hope this helps,
    Alejandro
    Edited by: Alejandro Sosa on Sep 5, 2012 6:29 AM

  • Always error when try to save my item type on workflow builder

    Dear All,
    I'm created a simple workflow. There is a notification with Result Type = Approval (Standard). Every I tried to save, workflow builder show a error message below:
    WFDESV_FAIL COUNT=1
    WFACTV_FAIL OPERATION=SAVE NAME=FIF_NOTIFY_APPROVER1_NTF TYPE=FIF
    WFACTV_MESSAGE_RESULT RESULT=WFSTD_APPROVAL
    What does it mean? I've tried to change Result Type with another standard Lookup Type (such as Boolean or another). But the error message still coming. How do I fix it?
    Thank you,
    Agas

    Hi,
    The first thing that is wrong is that your configuration is not finding the messages correctly, so that you get a meaningful message. Check that the keys in the registry for Workflow (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Workflow have been created correctly - there should be a Languages key and then ENG with an entry for Help, Message and TemplateDir which point to your Workflow home. Once that is set up, then you should at least get a meaningful message :)
    There are two possible problems here, but I haven't had chance to look in the messages file to see which one it is. Either the notification does not have a performer assigned to it when used in the process, or you have not modelled a transition for all available options - you need to model all responses, or use the "default" transition to capture those that you have not explicitly included.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • Run my own workflows from workflow builder

    Hi All,
    I installed the workflow builder 2.6, but I couldn't find how to run and deploy my own workflows. Is there a method to do that from the workflow builder, or no? if no, please tell me how.
    Thank you for any help
    Jamal Batikh

    No, the builder is a design tool only. It lets you develop workflow processes and save them to the database. To run a process, you usually have an application that launches the process, either using the CreateProcess/StartProcess APIs or using a business event. Or, for testing purposes you can also use the Launch Processes page in the Workflow web pages.

  • How to raise Workflow error from pl/sql procedure

    Hi,
    I have this OWB mapping that runs a PL/SQL procedure. The mapping is deployed to Workflow and OEM. The workflow is scheduled and run from OEM,
    and I can watch its progress/completion in the Workflow Monitor. Occasionally, the PL/SQL hits a situation I want to flag as an error to OWF so
    that the OWF standard error process can be activated.
    How can I do that? I try to raise an exception from the proc by calling OWF's core API (WF_CORE.RAISE etc.), but nothing happens.
    From Workflow monitor no errors are detected, and the workflow seems to complete normally.
    Any clues?
    Regards
    Rolf

    Rolf,
    I am no workflow expert but it seems to me that you trying to build a workflow exception handler by using the engine APIs (WF_ENGINE). In particular, you could call the WF_ENGINE.ABORT_PROCESS API and set the status to exception. This can be called from an exception handler using the WF_ENGINE.HandleError API.
    As far as I know, the WF_CORE API mentioned by you will simply return an exception to the caller, but this will not affect the process flow.
    For more details, please take a look at the workflow documentation, in particular if you log into the metalink site (metalink.oracle.com), go to the document http://metalink.oracle.com/cgi-bin/cr/getfile_cr.cgi?282250 which is the user's guide and look under chapter 8 which deals with APIs.
    Regards:
    Igor

  • Workflow corrupted after save from Builder

    We loaded a WFT file into the Workflow Builder, and saved it to a database. There was no indication of any error, and the icon in the builder switched to the database schema as expected. When we subsequently attempted to load this workflow from the database into the Workflow Builder we got several errors displayed, and it was clear that much was missing (e.g. no processes were displayed). On examination of the workflow tables, it seemed that some tables had been updated with the new version, others had not. This was the 5th or 6th version of this workflow, and it has always been saved in the same way. It has been saved successfully on a different server. We could do nothing with the corrupted version, we could not delete it or save it again. We had to restore the database. Any ideas what may have gone wrong here?
    TIA

    Problem solved - on the failing servers the WF_LOCAL_LANGUAGES table had only GB flagged as an installed language - the servers which worked had only US flagged as an installed language. Correcting this and the workflow saves correctly.

  • Error while building an executable from vi

    Hello,
    I am trying to make a .exe file from the VI which includes Vision Aquisition Software also and while building it I get a error message--
    Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass: Save.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Create_Build_Application.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
    Possible reason(s):
    LabVIEW: Cannot save a bad VI without its block diagram.
    Can anyone tell me how to solve this problem ?
    Thanks in advance.

    I had done that and did not work.  I did not get rid of the old build defination, but started a brand new one via Tools>Build Application (EXE) from VI...  I got the same error 1502.  Inspecting the offending VI did not yield any obvious problem with the block diagram. 
    Upon searching for error 1502, I found this Know Issue link:
    http://www.ni.com/white-paper/11869/en.  Issue ID 255617 stated:
    Error 1502 can occur if dependencies are placed in non executing case structures
    In previous versions of LabVIEW you could place VIs in a case structure with a constant wired the the case selector. This would load the VIs at runtime. If you have this pattern and attempt to build an executable you could receive error 1502
    Workaround: Don't use unreachable code
    So the issue is I have an case structure with hard coded boolean, so the other case is unreachable.

  • Get error message when trying to launch bridge from CC 64 bit.

    Get error message when trying to launch Bridge from Photoshop CC 64 bit.  "Cannot complete command because extension cannot be loaded."  Need fix.  Thanks.

    Hi Adobe Bubba,
    Please uninstall the software, run the cleaner tool, restart your machine and install again.
    Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
    Regards,
    Romt Sinha

  • Error coming while launching campaign from UI screen

    Hi All
    We have a problem launching campaign from UI screen,as when we try and launch the campaign from the screen
    following error is coming:
    Cannot display view BSPWD_BASICS/WorkAreaHostViewSet of UI Component CRM_UI_FRAME
    An exception has occurred Exception Class  CX_SHM_OUT_OF_MEMORY - Insufficient Shared Objects Memory Available
    Method:  CL_SHM_AREA=>_ATTACH_WRITE70
    Source Text Row:  2
    Error occurred during navigation
    An exception has occurred Exception Class  CX_BSP_WD_RUNTIME_ERROR -
    Method:  CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
    Source Text Row:  165
    Cannot display view BSPWD_BASICS/BreadCrumbView of UI Component CRM_UI_FRAME
    An exception has occurred Exception Class  CX_BSP_WD_INV_VA_ASSIGNMENT - Assigned view in view area Root could not be loaded.
    Method:  CL_BSP_WD_HIST_MANAGER_BASE=>GET_VIEW_ASSEMBLY 
    Please suggest what should i do to correct this.
    Any help will be highly appreciated
    Regards
    Ashish

    Hi Rohit
    Thats what i am really surprised off too,what we did was a little bit configuration for changing the skin of the screen,so a configuration request was created,now whatever changes i have done regarding the change in the skin etc. was not actually reflecting in the system & personalise button become ineffective on the main screen of UI.
    So to just go back to previous state ,i deleted that request.
    This is whatever we did,after that when we tried running campaign ,this error is coming,but i am not sure that whether this error is coming after this deletion of request or may be it was coming before too but i did not check campaign before these customisations.
    There is no Z object involved as role applied is Standard SAP Business Role & the probs coming is in the Viewset of standard Role.
    I have tried changing the role & created a Z role and applied it but of no use since the result is same,the error that i have already described.
    I am really clueless.
    Regards
    Ashish

Maybe you are looking for