Workflow - Can I move files around the directory structure?

I have been using Lightroom for a while now and developed a workflow that does what I need. Right now here is what happens in Lightroom:
1)Import RAW files
2)Edit/dispose images
3)Export to JPEG
4)Move RAW files to archive location off site
So my main question is with the last step. In Lightroom I can move the files to their new perminant location offsite. But I cant seem to get this same ability with Aperture. When I move the files it freaks out and cant locate the files anymore. I cant figure out the best way to get this workflow within Aperture. Any thoughts?

Nice easy answer, Two simple options (best to think of the long term needs before making the decision) Referenced or Managed
You can change round at a later date if need be. Aperture has options to do this for you.
Referenced keeps Masters on an external HD. Vaults back up the Library only and you have to do your own backup. This can be done during the import. Keeps internal HD space used to a minimum.
Managed Keeps Masters in Aperture. A complete backup of all the Library using vaults is possible. Uses more internal HD space.
Allan

Similar Messages

I can not move files to the trash.

I can not move files to the trash. When I drag the file to the trash it does not move, but it does appear in the trash and when I empty it, the file is erased. When I go back to my files, the file I just deleted is still there. I keep getting the "startup disk is full" message so I need to delete files, but I can't. Anyone know a solution to this?

try getting a external drive such as a usb flash drive or a hard drive to transfer the files from the startup disk, and free up space.
hope this helps!

Can't move files around primary hard drive or to trash without authenticating

Just installed Lion and now whenever I drag a file to a folder on my primary hard drive, I have to authenticate. Same with sending stuff to trash. When I do get it to trash, the items disappear without me telling it to empty trash.

After much searching, trial, and error, I may have found the answer to my own question. I clicked on the primary hard drive icon, and then opened the File --> Get Info window. I unlocked it with the password. Then, under Sharing & Permissions, I clicked on the + to add both me and admin to the access, and gave both Read & Write privileges. I then told it to apply to all items inside the hard drive. It took a while to apply, like a half hour, but when it was done, I restarted and then I could move stuff around the hard drive and into the trash without being prompted for authorization.

How can I move files using the title bar

I am using Mountain Lion, latest release (10.8.4) and am wondering if there is some secret options which would allow me to move files by clicking on the title bar (of e.g. preview) and moving it to a directory.
Unfortunately, I can only either create a link or copy the file. Moving seems to be deactivated, though I have learned from other forums posts that this was working under Tiger.
Any advise would be greatly appreciated.
Thanks,
equi

Depends on the application. iCloud-aware applications (Preview, Pages, etc) have the behavior you describe, and you can't move a file by dragging the thumbnail icon, but there is a small popup triangle to the right of the filename which contains the option "Move To" - you can then select your destination. It's not as seamless and dragging and dropping, though, I agree.
Non-iCloud-aware apps, like Office 2011, still allow drag-to-move from the titlebar icon.
Matt

Xpost - Automator can't move files to the trash?

*Cross posted from the 10.6 board.*
A very simple Automator script that I've used for some time now on several 10.5 machines refuses to work under 10.6. The contents are:
*Find Finder Items*
-on Desktop
-Whose size is less than 1 gb
*Move Finder Items to Trash*
That's it. This has worked and continues to work on all the 10.5 machines, but the one that I've upgraded to 10.6 now gives an error which states:
"The Action 'Move Finder Items to Trash" has encountered an error. Check the action's properties and try running the workflow again."
HALP! I'm not sure why this wouldn't work, I've redone the workflow on the affected machine to make sure there's no conflict between Automator versions, and still no joy. Any ideas?

I don't know much about Automator. However I have noticed that the action “Find Finder Items on Desktop whose size is less than 1 GB” seems to consider the Desktop itself as one of its items, which is the reason why the next action, “Move Finder Items to Trash”, becomes impossible. So just add the condition “whose name is not Desktop” to the first action.
Btw, your Automator script could be replaced with the following one-line AppleScript script:
*tell application "Finder" to move (items of desktop whose size is less than 1.0E+9) to trash*
Message was edited by: Pierre L.

Automator can't move files to the trash?

A very simple Automator script that I've used for some time now on several 10.5 machines refuses to work under 10.6. The contents are:
*Find Finder Items*
- on Desktop
- Whose size is less than 1 gb
*Move Finder Items to Trash*
That's it. This has worked and continues to work on all the 10.5 machines, but the one that I've upgraded to 10.6 now gives an error which states:
"The Action 'Move Finder Items to Trash" has encountered an error. Check the action's properties and try running the workflow again."
HALP! I'm not sure why this wouldn't work, I've redone the workflow on the affected machine to make sure there's no conflict between Automator versions, and still no joy. Any ideas?

Alicea, have a look at the post I made in the AppleScript forum here.

Can't move files, only duplicate

hello,
i have some files at the root level of my laptop drive and i want to move them, but they only copy into their new locations (duplicating) they don't simply move with the gong sound. i'm wondering why. does it have to do with permissions or something?
thanks
max

A 'move' is just shorthand for a 'copy to new location X, and delete from old location Y'.
You can't delete something outside of your user account without Admin privileges. I haven't tested this, but for that reason I'd imagine you can't move files in the root directory. Copy them then delete them manually, supplying your Admin password when prompted.

I can't move files to trash

I can't move files to the trash without the finder wanting an administrator password and then the file is immediately deleted. This just strarted a few days ago.

Click once on the hard drive icon - top right - and type command + i (both keys together).
This is the bottom half of what you will see:
1. Click the padlock and authenticate with your password.
2. Your Name should have the Privilege to Read and Write. If it does not click on whatever is there, and change it.
3. Click on the gear wheel and select "Apply to enclosed items".
There will be a message, say OK, and let it continue. This will take some time.

My photos in a folder are not in the correct order. How can I move them around?

I Am making an album of the life of an aunt. My photos are all in the wrong order. How can I move them around in the folder?

lets use the correct words so we do not mis-communicate
are you using iPhoto or the finder? Never touch your photos using the finder if you use iPhoto!
In iPhoto folders can not hold photos - folders hold only other folders or albums - albums hold photos -- within an album you can manually arrange photos as you wish

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

Can I move photos around in iPad? There are some photos in camera roll, are those the ones I took with iPad? Then there are some that are imported-I guess those are the ones from my camera. Can I combine them into different albums? Thanks

Can I mover photos around in iPad? There are photos on the camera roll-are those the ones I took with iPad? Then there are the ones labeled as imported-I guess those are the ones I took with my camera? Can I combine pictures from both into one album? Thanks.

At the moment no, you cannot move photos between albums in the Photos app directly on the iPad - but with iOS 5 (which will be free to download) in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device.

I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Here's one way to install. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

I have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W

HT3775 can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document "SC1ATK63.mov" could n

Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

When I put my iphone 4s into my pocket (pants or coat) and move it around, the phone beeps/makes a tone. I can't figure out what is causing the noise.

I have a strange problem. When I put my iphone 4S into my pocket (pants or coat) and move it around, the phone makes a beep noise/tone. I can't figure out what is causing the noise. It doesn't sound like any of my regular applications. Maybe it is the lock noise but I can't tell for sure. More movement makes more beeps. Even walking with my phone in my pocket creates beeps. The IOS is 7.0.4 (11B554a). Anyone else have this crazy problem?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Workflow - Can I move files around the directory structure?

Similar Messages

Maybe you are looking for