Workflow : Could not send e-mail [10014 : email ...

hi,
i am trying to send email notification via workflow, but i am not able to do so. anyone can help to troubleshoot this?
below are the steps i have carried out for email configuration:
1. i have added the mail server on mds.ini, MDS is restarted after every changes.
2. requester and approval has correct email setup at console.
3. a notification is added in workflow.
4. telnet ping to mail server with port 25 is fine.
when i check the log, i have the error :
"Could not send e-mail [10013 : email : Notify] [Mail server:xxxxxxxxx] [From address:xxxxxxxx] [To address:xxxxxxx
i know the guidelines and steps for configurations, but apparently it does not workout, so any troubleshoot guideline will be more appreciated.
Thanks!
Shanti

Hi Shanti,
I am sure you must have checked all this but then again would you please check following things and let us know ?
1) Please check the SMTP Server Name in your Outlook Express if you are using Outlook
2) Please log into MDS file and go under that particular Repositoy and check what details you have given for Mail Server
3) Please give SMTP address in mail server line
4) Log into Console and check if you have alligned Users and Roles to each other correctly or not.
5) log into Data Manager and open the workflow and check the properties of Mail notification stencil and check if correct proertise are set ot not.
Once you have made the changes at server level please restart the server again and then please let us know if this problem exist or not, may be we can more troubleshoot it further.
Thanks and Regards
Praful.

Similar Messages

LDAP - Could not send e-mail

Hi guru
We used SAP MDM 5.5 SP 6 (64.92)
In workflow we use e-mail notification, when SAP MDM Server work without LDAP e-mail is sending.
When we load SAP MDM Server with LDAP, every time when we send e-mail we get error "Could not send e-mail "
Sender and Receiver Users and their e-mail adress is exist in LDAP and right.
Moreover, we test sending e-mail from Server(where installed SAP MDM) through telnet for the same users and same e-mail adress(which precent in LDAP) - all work OK.
Question:
How we should configure SAP MDM Server for e-mail notification work correctly when it work through LDAP?
Regards
Kanstantsin Chernichenka

Hi Vinay M.S
Thank you for your answer, but
Really, in our case mail server attribute was named as "mail" and it exist in mds.ini (but that is not standart name for all ADs)
My another question: Why e-mail notification doesn't work from workflow in LDAP for all users?
Additiona information:
We have ~30000 users in AD but in MDM we used only ~500 from it.
For test we created 3 simple workflows with e-mail notification block:
1.Launcher set as user which name starting from symbol "B"
2.Launcher set as user which name starting from symbol "P"
3.Launcher set as "Launcher"
We set as receiver the same user for all workflows.
In 1 case e-mail notification is OK
In 2 case e-mail notification isn't work and we got error "Could not send e-mail" in workflow report. but username and sender receiver e-mail is right
In 3 case e-mail notification from user which we started workflow is OK (and for user which name starting from symbol "P")
Any ideas?
Regards
Kanstantsin
Edited by: Kanstantsin Chernichenka on Oct 2, 2009 1:35 AM

Can not send e-mails from account but can receive

I have my e-mail account with ATT Yahoo.
I received an account verification notice yesterday from ATT and I responded and they said I was verified.
However after I did that I could not send e-mails from my Imac desktop but I am receiving them.
I spend 4 and a half hours, yes 41/2 hours with both Apple Care and ATT and they could not correct the problem. Both discussions were with upper tier support personnel.
Here are some facts that make this an odd issue:
(1)
I have other e-mail boxes from ATT and they can send and receive e-mails.
(2)
MY laptop can still send and receive e-mails from the e-mail account that is only receiving with my Imac.
(3)
All the settings are exactly the same and both Apple Care and ATT checked them.
Is there anybody out there that may have an answer ?
Both Apple Care and ATT blamed each other.
My concern is that today I received another e-mail trying to verify my e-mail address for another e-mail address from ATT.
I called ATT and they did not know why, I DID NOT open it up and trashed it.
ATT has put a filter on my other e-mail accounts and hopefully that will end any problems with them.
The account that has the issue is my main account and I cannot trust leaving it and am trying to avoid having to change it.
Greg

Hi Rachel, For what it will be worth, I was like a dog with a bone about this, so I decided to give it another go. I have success on both boxes. Here is what I did, I warn you now it was a lengthy process. Before you begin download all the upgrade steps from X.5.0 to X.5.6 as single stages ( for me the combo's did not work) and have them ready to use.
1st Backup all your mail to CD/DVD not on the box. Check for any unsent mails anywhere in the box and then throw out all of the mail bits that are anywhere on the system in any folder. 2nd Install & Archive, 3rd Start up from Install DVD and check/set permissions, reboot. Enter all your ISP details to mail, see if you can send a mail to yourself. If not dump all the mail you tried and the .plists, reboot and install next update in the series, enter all details as before, try and send etc. If this fails dump again and reboot install next update etc.
I started at X.5.1 and got to vX.5.4 before I got a result in that sys asked me if this server will do, I said yes and I got mail out. The server name was different that was offered but when all was over it showed as the correct one that it should be on port 995. I must add that I had the spinning cog wheel for quite some minutes before anything happened. I continued on this way for the rest of the updates. 1x1 until v.6 was reached. That was only on the G4, I now had to do it all again on the MacPro. This one was not so co-operative in that I had to do it twice, but now it also has Mail running. It is funny though that I had to reach X.5.4 on both machines before it came right. On the G4 I was using a retail disc and on the Intel the supplied for discs.
Others on here may have a better and quicker way, but for me this did work. I am sure that there is a problem in either the mail app itself or the production of the Master DVD's.
Whatever, good luck.

SharePoint 2010: Scheduled Web Analytics Reports workflow is not sending ANY email

Hello,
I've a SharePoint 2010 Enterprise farm. I setup a Scheduled Web Analytics Reports workflow in a site collection with different web analytics reports options checked. So far I've not got ANY email. When I went to Site Workflows, I'm seeing that the workflow
is running. When I click on Completed status, I see below outcome in the Workflow History section:
"Email sent but reports with no data were not attached."
And I see below information in the Workflow History list:
"Attached are the daily Web Analytics reports for 1/7/2015 through 1/7/2015 for SharePoint Site Collection
http://server/team/site scheduled by workflow "SharePoint Site Web Analytics Reports". "
I am able to generate the reports manually by going to Site Collection Web Analytics Reports, but I want to schedule them. The problem is I'm not getting ANY email in my inbox. What am I missing here? Are the emails getting filtered by Outlook or workflow
is not sending emails at all?
Please help! This is getting frustrated.
Thanks,
Ashish

Hi Ashish,
Based on your description, my understanding is that the email is not sent from the Scheduled Web Analytics Reports workflow.
I recommend to the things below:
1. Check if the Outgoing email has been configured for the web application where you run the Scheduled Web Analytics Reports workflow.
In Central Administration > Application management > Manage web applications > select the corresponding web application > click General Settings in the ribbon and select Outgoing E-mail.
2. Make sure that your account has email address configured.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

I could not open my windows live hotmail emails and could not send any emails as well,how do I make it work again?

I could log into my windows live hotmail account but I could not send any emails or open any emails.
== URL of affected sites ==
http://sn122w.snt122.mail.live.com/default.aspx?wa=wsignin1.0

Hello David.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
In addition, read this article:
http://support.mozilla.com/en-US/kb/Websites+look+wrong

Could not send out email...found out the real reason

I use windows live mail.When I was away from home I could not send out any emails. When I called tech support, I was told because I was not at home using my DSL router. I mentioned that I could receive emails from Verizon no problem but could not send out.
The real reason was my anti-virus out-bound email scan. When I turned off this scan, all my outbound mail went out.

that's a great tip for forum users. thanks for sharing with everyone.

Could not send mail using outlook when tethered (m...

I have had a problem for a long time where I could not send email from my laptop when connected to the internet via a hotspot on my 3 mobile phone.
After a long conversation with three where we determined that if I used three's SMTP server settings I could send email no problem, but once I was back on wifi i had to change my settings back to the BT settings (mail.btinternet.com), I decided to try and tackle BT support to get a resolution to the issue.
I knew this would be challenge and that I would end up speaking to someone who could speak english but actually didn't really understand it, and Bt didn't disappoint!!
I had a long online chat where it was explained to me that if I was connected via my 3g/4g connection I would have to use my providers SMTP because that is just the way it is. O.k. what did I expect!!
Anyway I am just posting here so if anyone has the same problem I may be able to help you as I have now managed to get this up and running. How?? I hear you ask.
In my case I used the mail checker on BT to see who's mail service I was with and it varified I was still with BT yahoo rather than BT Mail.
I decided to try the yahoo setting for the SMTP server rather than the stock mail.btinternet.com and I am now up and running.
My SMTP Setting is now - smtp.mail.yahoo.co.uk (port 465 with SSL)
Hope this helps someone else as I just could not find an answer by googling the issue.

There is absolutely no reason why it shouldn't work using mail.btinternet.com port 465 with SSL. Works fine for me, albeit on O2 rather than Three, but the principle is the same.

Could not send email while in MX, wireless connection

Last week I could not send email while in MX, wireless connection, using an SMTP server I usually use, and had used from Europe months before - only difference was that I did not turn on AT&T's international access feature. I wish now that I had thought to turn off localization. Email went out when I returned to the USA with no other change. Is this a known "feature"?

Bring the Mail browser window forward, then select Enter Time Machine from the Time Machine menu, which is represented by a clock icon in the menu bar. If you don't have that menu, select
 ▹ System Preferences ▹ Time Machine ▹ Show Time Machine in menu bar
Scroll back in the time-travel view to the most recent snapshot containing the messages you want to restore. Select the messages, then click Restore. The messages will be restored to a new mailbox. From there you can move them wherever you like.

SharePoint Designer 2013 Workflow not sending e-mails

Hello everyone, it's me again.
I have a problem with my custom workflow. A simple workflow made in SharePoint Designer 2013 with a "Send Mail" action isn't actually sending any e-mails.
I am able to send mails with SharePoint 2013 with out-of-the-box workflows or alerts when sharing a page. The simple workflow is: Send Mail to TestUser after a new item has been created.
1) SMTP server has been configured and tested successfully, I am able to send mails
2) The workflow gets "Completed" status even though I didn't actually receive a mail
3) I double checked User Profiles and the e-mails are correct (I also checked in Active Directory)
4) The User Profile Sync. Service is running and I even did a full sync
5) Out of the box workflows are work perfectly fine
I have no explanation why custom workflows won't send a mail. I can perform other actions like "change workflow status".
Any help please?

Hi Ali,
Please check if "send mail" action does not work in both SharePoint workflow 2010 platform and SharePoint 2013 platform.
Please add the actions "log to history" before and after action "send mail" to check if the send mail action is performed.
And you can also add "pause for a duration" before the "send mail" action, see if it could help.
You may also check if there are some related ULS log.
Thanks
Daniel Yang
TechNet Community Support

I had free adobe reader and i scanned a doc to send to a client and as of last night i could not send as an attachment thru my email. So I paid for the 89.99 year adobe pkg and it still wont let me email a scanned and saved doc. it says 'an unknown error

i had free adobe reader and i scanned a doc to send to a client and as of last night i could not send as an attachment thru my email. So I paid for the 89.99 year adobe pkg and it still wont let me email a scanned and saved doc. it says 'an unknown error occurred'?

What exactly means "could not"?
And what Adobe product/service did you pay for?

Could not send notification 65569 (status 'FAILED')

Customize Workflow runs with 2006 error - only happen in the morning
We have created a customize workflow which works a bit funny here:
When we first run the workflow in the morning, it ends up with this error:
Activity Buyer Notifications
Result Mail
Error Name WFMLRSND_FAILED
Error Message 2006: Could not send notification 65569 (status 'FAILED') to 'CONTRACT SERVICES'.
Error Stack WF_MAIL.GetDocContent(PO_DETAILS_BUYER)
Then, thinking of some problem might happend to the workflow mailer, we run the standard workflow, e.g. PO Approval. It runs successfully and send out the notification email. So, we then run the customise workflow again, and this time it works, no error has been generated as above.
The funny thing is, this had happened more than a week, where every morning I have to somehow run a standard workflow (normally I just create a new PO and send for approval), and got my customize workflow run successfully.
Can someone highlight what's going wrong here?
Is that some setup or soemthing that contribute to this problem?
Thanks,
Patricia

The notifications are defined in the workflow but they do use a document type attribute (we send a table of data "Job", "Job Name", "Amounts").
We have changed the database packages a lot and that created many problems afterwards so we minimized when we make those changes and we restart everything (database, IAS Server) afterwards.
Here is the email to SYSADMIN:
=========================================================
Subject: Error in Workflow DUNAPIN2/20060323123955x30741282 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
From
To SYSADMIN
Sent 03-APR-06
Due
Notification ID 41121
An Error occurred in the following Workflow.
Item Type = DUNAPIN2
Item Key = 20060323123955x30741282
User Key =20060323123955x30741282
Error Name = WFMLRSND_FAILED
Error Message = 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
Error Stack = &ERROR_STACK
Activity Id = 52557
Activity Label = GET_GENERAL_LEDGER_APPROVAL:NTF_V2_AR_DEPT_OFF_MGR
Result Code = #MAIL
Notification Id = 41119
Assigned User = KKEMPER
Workflow monitor
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
How do you want to Continue?
How do you want to continue?: Abort Resolved Retry Request information
=========================================================
Any help would be greatly appreciated.
Jim

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Could not send permission request...

I just set up my daughter with her own .mac account. When I attempt to send a message from her account, I'm prompted to 'request parental permission'.
I click on 'Ask Permission' and am presented with the message...
'Could not send your permission request to your parent...'
Her email settings are the same as mine with the exception of ID and password.
Setting up in System Preferences and Mail worked just fine.
Any ideas?
Thanks...Kevin

I'm wondering why there are no replies to this at all.
Probably because you're talking about a new feature (Parental Controls) that few people use or have experience with.
Are there any Apple employees that look over
these discussions?
http://discussions.apple.com/help.jspa
I'm still unable to get this working.
Open Mail Help, type "parental controls" in the search box and press <Return>. Post back here if there is something there you don't understand or need more info.
Is it worth posting a problem here?
Usually, yes.
Or is this just for problems that are easy to solve?
I assure you that, each and every day, problems much, much harder than yours are being solved in this forum.

Sending of mails to email accounts

Hi Friends,
Sending of mails to email accounts. Can it be consolidated like UWL?
Currently, the supporting & approval process of the appraisal form is not done through the SAP workflow framework. But our clients would like to request whether there is a consolidated email like the UWL to be sent to employees. My clients would like to standard it like the UWL. We can look into see how the program can be used to check the appraisal forms u201Cinboxu201D and trigger a similar consolidated mail.
Can anyone have idea of how to solve this issue and if possible pls reply me.
Thanks,
Deesanth

solved

"Could Not Send Message Using The Server...:

I never have any trouble sending from Apple Mail, except now I am trying to do a mass-mailing for our business. Is there a limit on how many people you can BCC?
For the 1st message I put 200 people in the BCC field, and the message sends fine. Then I setup the another message with the next 200 people, and the send fails. Get a notice that Apple "Could Not Send Message Using The Server SMTPOUT.secureserver.net". And gives me the option of selecting other servers, neither of which work either.
I am curious, are there limits on how many people you can copy on one message?

Most, if not all ISPs and email account providers have similar limits per the following for personal/non-business email accounts as part of an overall effort to eliminate or reduce bulk spam emanating from the ISP's or email account provider's domain.
Any ISP or email account provider that doesn't impose similar limits is helping to contribute to the amount of spam that gets circulated.
.Mac has several safeguards in place to ensure that only .Mac members send messages with the Mac.com outgoing mail server.
Among them are reasonable limitations on:
The number of messages that can be sent each day (200 messages)
The number of recipients that can be sent to each day (400 recipients)
The number of recipients a message can be addressed to at one time (100 recipients)
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.

Workflow : Could not send e-mail [10014 : email ...

Similar Messages

Maybe you are looking for