Workflow Dangling Error ?
Hi ,
I am getting this error
" WFLDRLFK_FAIL
WFLDRLFK_DANGLING_REF_ACT LABEL=VERIFY_COUNTRY PROCESS_NAME=ROOT PROCESS_ITEM_TYPE=XXAPLSHP NAME=VERIFY_COUNTRY ITEM_TYPE=XXAPLSHP "
in my workflow earlier I have defined a function by name "Verfiy Country " . now It has been deleted but when ever I am trying to move an attribute or save the workflow I am seeing this Dangling error message .
although my workflow is working fine .
how to resolve this issue ?
Skg
Hello,
Could you please post the actual error. I doubt very much it is "Workflow Ambiguos Error".
regards
Rick Bakker
hanabi technology
Similar Messages
-
Custom Workflow Load Error in Power Center error code 36331
Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay -
DAC Workflow run error code: [36331]
Dear all ,
I want to Integrate OBIEE with Oracle R12.1.1
Initially I have defined new container & Phyiscal Data Sources in DAC
Datawarehouse Test Connection Successful
ORA_R1211 Test Connection Successful
FlatFile Connection ?
After that I created new Plan & generate the parameter and also built it successfully but when I run that execution plan it give error.
Please any one can help me regarding this issue.
also provide me step by step document to integrate OBIEE with Oracle R12.1.1
Regards,
YasirKindly See the log of last ETL run........
494 SEVERE Wed Dec 08 18:11:04 GMT+05:00 2010
START OF ETL
495 SEVERE Wed Dec 08 18:11:45 GMT+05:00 2010 Starting ETL Process.
496 SEVERE Wed Dec 08 18:11:50 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
497 SEVERE Wed Dec 08 18:12:12 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
498 SEVERE Wed Dec 08 18:12:22 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
499 SEVERE Wed Dec 08 18:12:44 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
500 SEVERE Wed Dec 08 18:13:04 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
501 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
502 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
503 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
504 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
505 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
506 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
507 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
508 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
509 SEVERE Wed Dec 08 18:13:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
510 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
511 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
512 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
513 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
514 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
515 SEVERE Wed Dec 08 18:14:23 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
516 SEVERE Wed Dec 08 18:14:30 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
517 SEVERE Wed Dec 08 18:14:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
518 SEVERE Wed Dec 08 18:14:38 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
519 SEVERE Wed Dec 08 18:14:42 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
520 SEVERE Wed Dec 08 18:14:43 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
521 SEVERE Wed Dec 08 18:14:49 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
522 SEVERE Wed Dec 08 18:14:58 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
523 SEVERE Wed Dec 08 18:15:05 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
524 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
525 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
526 SEVERE Wed Dec 08 18:15:17 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
527 SEVERE Wed Dec 08 18:16:04 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
528 SEVERE Wed Dec 08 18:16:16 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
529 SEVERE Wed Dec 08 18:16:17 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
530 SEVERE Wed Dec 08 18:16:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
531 SEVERE Wed Dec 08 18:16:28 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
532 SEVERE Wed Dec 08 18:16:57 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
533 SEVERE Wed Dec 08 18:17:22 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
534 SEVERE Wed Dec 08 18:17:31 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
535 SEVERE Wed Dec 08 18:17:58 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
536 SEVERE Wed Dec 08 18:18:21 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
537 SEVERE Wed Dec 08 18:21:36 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
538 SEVERE Wed Dec 08 18:22:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
539 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap' has completed with error code 0
540 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Bank_Branch_Name' has completed with error code 0
541 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Cust_Class' has completed with error code 0
542 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Uom_Code' has completed with error code 0
543 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_CostCenter' has completed with error code 0
544 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
545 SEVERE Wed Dec 08 18:22:27 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method' has completed with error code 0
546 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix11], build [457.0505], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Wed Dec 08 18:23:43 2010
Connected to Integration Service: [Oracle_BI_DW_Base_Intergration_Service].
Integration Service status: [Running]
Integration Service startup time: [Wed Dec 08 17:05:35 2010]
Integration Service current time: [Wed Dec 08 18:23:46 2010]
Folder: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_CodeDimension_Payterm_Ap] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_CodeDimension_Payterm_Ap] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_Payterm_Ap] will be failed.]
Workflow run id [103].
Start time: [Wed Dec 08 18:22:13 2010]
End time: [Wed Dec 08 18:23:38 2010]
Workflow log file: [F:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_CodeDimension_Payterm_Ap.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Oracle_BI_DW_Base_Intergration_Service]
Disconnecting from Integration Service
Completed at Wed Dec 08 18:23:46 2010
=====================================
ERROR OUTPUT
=====================================
547 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Payterm_Ap
548 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::Execution of child batch Informatica Session Batch failed.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:340)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
954 SEVERE Wed Dec 08 18:31:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
955 SEVERE Wed Dec 08 18:32:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_GLLinkageInformationGeneral_Full.txt SIL_GLLinkageInformationGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
956 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 ETL seems to have completed. Invoking shut down dispatcher after the notification from the last running task.
957 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Finishing ETL Process.
958 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 MESSAGE:::Some steps failed.
EXCEPTION CLASS::: com.siebel.etl.engine.bore.SomeSessionsFailedException
com.siebel.etl.engine.bore.NewDispatcher.execute(NewDispatcher.java:302)
com.siebel.etl.engine.bore.NewDispatcher.run(NewDispatcher.java:121)
java.lang.Thread.run(Thread.java:619)
959 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Dispatcher thread completed.
960 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Number of incomplete tasks whose status got updated to stopped :0
Number of incomplete task details whose status got updated to stopped :2630
961 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL DataWarehouse
962 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL ORA_R1211
963 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
END OF ETL
-------------------------------------------- -
Hi ,
I was getting the workflow mailer error from R12. I tried to start,but failed......after that I got a confirmation from my client that somebody changed a table, then I checked again and found Workflow mailer working fine....I didnt get what happened on this...
friends, If you have any idea on this, please sharePl post details of OS, database and EBS versions. Has this mailer worked before ? If so, what changes has been made recently ? Pl also see these MOS Docs
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer (Doc ID 463354.1)
Unable To Start Workflow Notification Mailer (Doc ID 418329.1)
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues (Doc ID 753845.1)
Workflow Mailer Will Not Start Stays In Starting Status (Doc ID 837893.1)
Unable To Connect To The Mail Account. Check The Host, User Name And Password (Doc ID 1123684.1)
HTH
Srini -
Workflow in Error state in SWI1 tx, but still table is updating as usual, weird!!
Hello,
We have a custom workflow, z_workflow.
In this z_workflow, its calling a custom FM, z_fm.
In this z_fm, I'm updating a custom tbale, z_table.
Before writing UPDATE z_table, I am locking this z_table by using 'ENQUEUE_E_TABLE', as below,
Pls. note this workflow is triggering in BACK GROUND by WF-BATCH user
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
UPDATE z_table
SET matnr = ls_mara-matnr
descr = lv_text
WHERE ref_id = ref_id.
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. =====>
==> If the lock is failing an an ERROR / 'E' type message is occuring, but still the 'Rest of the code blocks' are executing normally (where in 2nd_z_table is updating), but the workflow is ending up in 'Error state' in SWI1 (workflow log) transaction, our users who are monitoring this workflow thinking that the transaction went bad, but again they noticed that the 2nd_z_table is updating as usual!!
ENDIF.
Rest of the code blocks ==> here another custom tbl, 2nd_z_table is updating
Our workflow expert said that, the error is occuring, well, but as its (z_fm) calling from / by back ground workflow user, hence the 'Rest of the code blocks' are triggering normally and the 2nd_z_table is updating as usual, but overall the workflow ends up in error state!
To avoide this confusing situation (workflow in error, but rest of the code blocks are executing normally), workflow expert suggested the below approach (raising of EXCEPTION in z_fm instead of ERROR message), pls. suggest me is it OK / safe / works good for me?
DO 10 TIMES. => Workflow expert asking me to add all these blue lines to my code
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
UPDATE z_table
SET matnr = ls_mara-matnr
descr = lv_text
WHERE ref_id = ref_id.
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = 'Z_TABLE'.
CLEAR lv_locking_failed_on_z_table.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
lv_locking_failed_on_z_table = abap_true.
ENDIF.
ENDDO.
IF lv_locking_failed_on_z_table IS NOT INITIAL.
RAISE exception_lock_failed. ===> Does the Raising EXCEPTION is solve my problem? pls. suggest me
RETURN.
ENDIF.
workflow expert said with this raising of exception will not trigger 'Rest of the code blocks' so that user will be not confused
Thank youHi "3SAP"
Yes, your WF guy is correct - raising exception will stall the workflow and not execute to the second table update.
Moreover, second table update logic should be kept inside of the SY-SUBRC = 0 of locking on FIRST TABLE update.
In current case, I cannot say for sure that second table is getting updated in the same call because as soon as TYPE 'E' message is triggered in a background step, standard exception is triggered in the workflow runtime to stop execution - which will NOT execute the code after MESSAGE statement.
As mentioned by Mike, the second table may have been updated from another instance/session/etc but from not this one.
Regards,
Modak -
Error coming out of Workflow restart - Error:OBJECTS_OBJREF_NOT_ASSIGNED_NO
Hi all,
After restarting the workflow through SWPR we are getting an error message as per mentioned below.
Error coming out of Workflow restart - Error:OBJECTS_OBJREF_NOT_ASSIGNED_NO.
Kindly suggest what can be the possibility of the error. I scehduled the SWPR program in the background and passed some workflows and getting this error message in the background job. Kindly suggest.
Thanks,
Neslin.I think you need to analyse the Workflow log and then try to restart. I think you might have to change the container element value in order to remove the error. Please check and act accordingly.
Thanks
Arghadip -
Workflow Customizing Error: "Workflow: No workflow definition found"
Hi experts,
I am currently configuring Workflow on our newly installed ECC 6.0 using the Automatic Workflow Customizing (SWU3).
I was able successfully executed all necessary items including the RFC destination but when i choose the 'Start Verification Workflow', this error appears: "Workflow: No workflow definition found".
I tried logging in and out of the system, and repeating the execution of each item but the same error still occurs.
I read a thread that says it might do something with WF-BATCH but i was able to set it as the RFC destination; WF-BATCH has the following settings in SU01:
Username: WF-BATCH
User Type: System
User Group: SUPER
Authorization: SAP_ALL, SAP_NEW
Hope somebody can help me resolve this issue as soon as possible.
Thanks in advance.
Regards,
DexHi Dex,
Have you maintained the Number ranges in Transaction SWU3?
If so, then test the workflow from SWDD itself.
I think you gave the wrong workflow ID in the SWUS transaction.
First try with SWDD and then check it in SWUS Transaction.
Thanks,
Viji. -
Hello Friends,
I have developed a custom sequential workflow in SharePoint Server 2010 using VS 2010. My workflow gets activated and then creates a new task in the Tasks List.
But "Error Occurred" gets displayed in the Workflow column in the default view of my document library instead of "In Progress".
I debugged my code and there are no errors in it. But I found the below error in \14\LOGS\:
"SharePoint Foundation Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1-28c8-409d-bc65-7115bc17edfa"
I have set the properties correctly for the workflow activities in VS 2010.
Can anybody help me solve this error?
Thanks in advance...
Regards,Gautam Kaikini.I am having the same issue, here is some of the logging errors I am seeing. If anyone has any ideas I would be forever in your debt,
02/24/2011 11:32:47.52 w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
88xr Unexpected
WinWF Internal Error, terminating workflow Id# 4128e252-208e-4d6c-8772-12c51959038e
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52 w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedSuffix)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String
fullName) at Microsoft.SharePoint...
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52* w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
....SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.GetSPRequest()
at Microsoft.SharePoint.SPSite.get_Request() at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForWorkflow(SPWorkflow wf, SPWorkflowUserContext
runAsUser) at Microsoft.SharePoint.Workflow.SPWinOEWSSService.get_Web() at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForListItemService() at Microsoft.SharePoint.Workflow.SPWinOEWSSService.UpdateModerationStatus(Guid
id, Guid listId, SPItemKey itemKey, SPModerationStatusT...
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52* w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
...ype newModerationStatus, String comments) at Microsoft.Office.Workflow.Actions.SetTaskProcessItemModerationStatus.DoUpdate(ActivityExecutionContext context) at Microsoft.SharePoint.WorkflowActions.WaitForDocumentUnlockActivity.Execute(ActivityExecutionContext
executionContext) at Microsoft.Office.Workflow.Actions.SetTaskProcessItemModerationStatus.Execute(ActivityExecutionContext context) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext
executionContext) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Schedule...
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52* w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
...r.Run() 616e0e48-457e-4620-8191-dbe40c9af587
Thanks in advance! -
Triggering workflow using error messages
hi all,
how can i trigger workflow from error messages?
thanks in advanceIf this is a custom Error message put your code for triggering your Workflow just after that. Use FM SWE_EVENT_CREATE or SAP_WAPI_START_WORKFLOW.
If it is a Standard message used in SAP Programs then look for User Exit. -
Error Workflow System:error on approving Requisition
Hi,
DB:11.1.0.7
R12.1.1
OS:Linux 86x64 Red Hat Linux
We are receiving Error Workflow System:error on approving Requisition?
Could anyone please share the resolution on it if faced before?
Thanks for your time!
Regards,Hi
I see the below error in log.
Abort Resolved Retry Reassign Request Information
To SYSADMIN
Sent 20-Apr-2011 13:15:54
ID 5008
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 104-108
User Key =9
Error Name = WFENG_ITEM_ATTR
Error Message = 3103: Attribute 'DOCUMENT_ID' does not exist for item 'POAPPRV/104-108'.
Error Stack =
PO_REQAPPROVAL_ACTION.ReserveAutonomous(010)
PO_REQAPPROVAL_ACTION.ReserveDoc(ReserveDoc 020: Doc Header Id = 104)
PO_REQAPPROVAL_ACTION.Reserve_Doc(POAPPRV, 104-108, PO_REQAPPROVAL_ACTION.Reserve_Doc: 01)
Wf_Engine.GetItemAttrNumber(POAPPRV, 104-108, DOCUMENT_ID)
Wf_Engine_Util.Function_Call(PO_REQAPPROVAL_ACTION.RESERVE_DOC, POAPPRV, 104-108, 229749, RUN)
Activity Id = 229749
Activity Label = DOC_RESERVE_PROCESS:RESERVE_DOCUMENT
Result Code = #EXCEPTION
Anybody have any idea on this.
Thanks and Regards, -
Hi everybody!
I have a sharepoint 2013 farm with 4 servers. I install and configure workflow manager 1.0 successfully. when I create a workflow of template workflow 2010 on my list it create and run properly.
First time I create a workflow of template workflow 2013 on my lists, It create successfully but when I run it, nothing happens I got error
“there is some problem, reload the page and try again.” and state of workflow change to idle,
but now when I try to create another workflow of template workflow 2013 on my lists, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
I try to restart SharePoint Designer but the problem exists. I try to delete cache, uninstall the SharePoint Designer and install it again but nothing changed…
Any solution???Do you have any language pack installed, if yes then check...
http://social.technet.microsoft.com/Forums/sharepoint/en-US/06b98030-fd19-4a03-9a05-1b5d28fdf693/server-side-activties-have-been-updated-you-need-to-restart-sharepoint-designer-to-use-the-updated?forum=sharepointcustomization
Also check this
one:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/5796972e-3a92-4306-8cf1-e1e7b9ab9635/error-while-saving-a-workflow-via-sharepoint-designer-serverside-activities-have-been-updated-you?forum=sharepointcustomization
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.I ran into your post while having a similar issue. I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
and open in browser) the error doesn't occur. Hope that helps some.... -
SP 2013 Running Workflow giving Error - Sorry Something went wrong
Hi,
We have publish workflow running on a document and we need to cancel/ terminate it.
On the workflow Page we can see under the "Running Workflows" , the workflow is running. But when we click on that it gives the Something went wrong error message. As we are not able to goto the workflow status page on UI, we dont get option to
End the workflow.
To Cancel the workflow we tried following things -
1. Powershell command to get the workflow object and cancel it. But using the powershell command- $listItems.Workflows does not give the instance of this stuck workflow. If we start new workflow on that item , it will get added to the count but this stuck
workflow does not come under its count. So we are not able to get its instance using powershell and cancel it.
2. Using client side programming we tried directly passing the workflow instance name and terminate it but it gives the exception that "given key was not present in the dictionary"
string workflowGuid = "91ee281b-3938-45a5-9bb2-8bd128bfa90c";
var workflowServicesManager = new WorkflowServicesManager(clientContext, clientContext.Web);
var workflowInstanceService = workflowServicesManager.GetWorkflowInstanceService();
WorkflowInstance instance = workflowInstanceService.GetInstance(new Guid(workflowGuid));
workflowInstanceService.SuspendWorkflow(instance);
Please let us know how to get rid of this stuck workflows.
prashantHi Prashant,
According to your description, my understanding is that you want to cancel the stuck workflows in SharePoint 2013.
If the workflow is designed in SharePoint, I recommend to go to the Workflow Settings of the document library, click Remove, Block, or Restore a Workflow to remove the workflow with the stuck instances and then republish the workflow from Designer to SharePoint.
Or you can use the code in the link below to cancel all the workflow instances to see if the issue still occurs:
http://www.codeproject.com/Articles/679628/Easiest-Way-of-Cancelling-All-S
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Regarding Workflow mailer error
Hi
Could anyone teach me how to troubleshooting these errors in log of mailer?
My customer made mailer available through OAM and could send notification.
However, a lot of errors were found in log of mailer.
Quote
[Nov 7, 2011 8:33:55 PM JST]:1320665635770:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665633553:10:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10011
[Nov 7, 2011 8:33:54 PM JST]:1320665634490:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
[Nov 7, 2011 8:33:57 PM JST]:1320665637002:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
<af type="tenured" id="106" timestamp="Nov 07 20:33:58 2011" intervalms="3796.734">
<minimum requested_bytes="98320" />
<time exclusiveaccessms="0.032" meanexclusiveaccessms="0.032" threads="0" lastthreadtid="0x3225CB00" />
<refs soft="399" weak="183" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<tenured freebytes="0" totalbytes="18192896" percent="0" >
<soa freebytes="0" totalbytes="18192896" percent="0" />
<loa freebytes="0" totalbytes="0" percent="0" />
</tenured>
<gc type="global" id="106" totalid="106" intervalms="3796.788">
<expansion type="tenured" amount="3553280" newsize="21746176" timetaken="0.000" reason="insufficient free space following gc" />
<finalization objectsqueued="27" />
<timesms mark="22.192" sweep="0.514" compact="0.000" total="23.115" />
<tenured freebytes="6622496" totalbytes="21746176" percent="30" >
<soa freebytes="6405408" totalbytes="21529088" percent="29" />
<loa freebytes="217088" totalbytes="217088" percent="100" />
</tenured>
</gc>
<tenured freebytes="6524176" totalbytes="21746176" percent="30" >
<soa freebytes="6383376" totalbytes="21605376" percent="29" />
<loa freebytes="140800" totalbytes="140800" percent="100" />
</tenured>
<refs soft="214" weak="167" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<time totalms="23.241" />
</af>
[Nov 7, 2011 8:34:29 PM JST]:1320665669022:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
[Nov 7, 2011 8:34:36 PM JST]:1320665676474:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:07-NOV-2011, priority=50, correlationId=null, sendDate=Mon Nov 07 20:34:29 JST 2011, receiveDate=null, From Agent: , To Agent: , Last Subscription= , Error Message=null, Error Stack=null, CONTAINER_TYPE=GSM, CONTAINER_PROCESS_ID=133833, COMPONENT_ID=10005, [email protected], BES_PAYLOAD_OBJECT=false})
[Nov 7, 2011 8:34:46 PM JST]:1320665686481:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
[Nov 7, 2011 8:34:46 PM JST]:1320665686614:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10005
[Nov 7, 2011 8:34:46 PM JST]:1320665686772:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
[Nov 7, 2011 8:34:46 PM JST]:1320665686812:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
[Nov 7, 2011 8:35:29 PM JST]:1320665729053:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
<af type="tenured" id="107" timestamp="Nov 07 20:35:36 2011" intervalms="98237.510">
<minimum requested_bytes="98320" />
<time exclusiveaccessms="0.024" meanexclusiveaccessms="0.024" threads="0" lastthreadtid="0x330E6900" />
<refs soft="483" weak="329" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<tenured freebytes="0" totalbytes="21746176" percent="0" >
<soa freebytes="0" totalbytes="21605376" percent="0" />
<loa freebytes="0" totalbytes="140800" percent="0" />
</tenured>
<gc type="global" id="107" totalid="107" intervalms="98237.593">
<expansion type="tenured" amount="1048576" newsize="22794752" timetaken="0.000" reason="insufficient free space following gc" />
<finalization objectsqueued="25" />
<timesms mark="20.137" sweep="0.800" compact="0.000" total="21.178" />
<tenured freebytes="6998816" totalbytes="22794752" percent="30" >
<soa freebytes="6623520" totalbytes="22419456" percent="29" />
<loa freebytes="375296" totalbytes="375296" percent="100" />
</tenured>
</gc>
<tenured freebytes="6900496" totalbytes="22794752" percent="30" >
<soa freebytes="6671632" totalbytes="22565888" percent="29" />
<loa freebytes="228864" totalbytes="228864" percent="100" />
</tenured>
<refs soft="215" weak="169" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<time totalms="21.265" />
</af>
I have checked the below notes,but I'm not clear.
761434.1 Workflow Mailer fails to star : Maximum Number Of Errors (100) Have Been Reached : WebSession.isSessionRecreated
333017.1 OWF.G Mailer just started dumping a OutOfMemoryError
Please teach me what's the meaning of errors and what we should deal with them.
Best Regards
LiyingPlease post the details of the application release, database version and OS.
Please see these docs.
Java.Lang.Outofmemoryerror On Large Inbound XML Message [ID 560680.1]
Intermittently Notification Emails are not Received [ID 1315344.1]
OWF.G Mailer just started dumping a OutOfMemoryError [ID 333017.1]
Output Post Processor is Down With Error "Insufficient Free Space Following GC" [ID 885607.1]
Thanks,
Hussein -
OOTB workflow gives error when user rejects in the document in publishing a major version.
Hi All,
I am using OOTB workflow with little customization with following configuration
1. Allow content approval enabled
2. Configure a workflow with following general settings true
3. Start workflow on publish of Major version only is enabled
4. workflow has following configuration enabled.
Now, when user start publishing of major version and Starts the workflow. workflow starts without any problem.
But as and when the user rejects the document it is rejected with Reject status with "Approval Status" as well as workflow status which is expected.(This is correct )
But when i look at the workflow history i can see at last line there is an Error with
An error has occurred in In [Workflow Name].
Now when user check out and check in item again and try to publish with Major version again. it gives errors that the previous version is still running.
I have trace a lot and also test with original OOTB workflow itself. it is behaving the same.
As per my findings there is problem in "Completion condition of this task process" the end task process is not being executed correctly.
I tried to end the task process with End the task process action but it is still not working.
I need some help in this issue as users are facing problems in case of rejection. I hope some one has the solution for the same.
Two things i have noticed are
1. My MS office 2010 professional plus is expired as i was using trial version
2. I have made stop inheriting tasks permission and remove all default groups as i have settings in workflow "Only allow task reception and process owner to read and edit workflow task"
3. Earlier i had also installed "Sharepoint 2010 April 2012 updates". i had also observed that (installing Sharepoint 2010 April 2012 updates) before that if user has selected "Automatically rejects the document if any participant rejected". it ends
with "rejected" status. At present it remains in inprogress and not stops with rejected status.
Can any one give me a hint what should be the problem ? Is it a problem with latest Sharepoint 2010 April 2012 updates ?
Thanks,
S. M. MANIYARI have done following testing.
1. The server in which i have not installed sharepoint 2010 April 2012 updates the above scenario is working fine without any problem
2. I have also observed following logs of error in server where April 2012 updates is installed.
8/28/2012 03:51:41.33 w3wp.exe (0x0F08) 0x0A00 SharePoint Foundation
Workflow Infrastructure 88xr Unexpected WinWF Internal Error, terminating workflow Id# 8bf7fef1-c92e-4b22-a16f-480425d3adc6
08/28/2012 03:51:41.33 w3wp.exe (0x0F08) 0x0A00 SharePoint Foundation
Workflow Infrastructure 98d4 Unexpected System.InvalidOperationException:
CompositeActivity cannot transition to 'Closed' status when there are active child context still exist for child activity. at System.Workflow.ComponentModel.Activity.MarkClosed() at System.Workflow.ComponentModel.ActivityExecutionContext.CloseActivity()
at Microsoft.Office.Workflow.Actions.OfficeTask.FinalClose(Object sender, EventArgs eventArgs) at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Following are last two lines of workflow history.
S. M. MANIYAR
Maybe you are looking for
-
I am trying to figure out how I can transfer my library to my new 2014 honda accord that has an internal 16gb hard drive. The manual for the car says that it needs to be original CD's but I have purchased alot of the albums/songs I have from I tunes
-
Count the No.of Columns in a Table
Hi,Is it possible to write a Select statement that returns back the number of columns in a table? Or is there any other way on knowing the number of columns in a table?
-
Error while embedding java into BPEL
Hi Guys, I am getting the following error while embedding Java into BPEL. Error: C:\unzipjdev\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\.client (The system cannot find the file specified) i checked for .client content , it is not available i
-
Account determination config for VA88
Hi One of my user is complaining that VA88 is porting to wrong GL Account. Can some one tell me where in config I can chnage the GL account attached to VA88 ? This is very urgent for me. Also can some one send me the link of any doc for t-code VA88 ?
-
I made a mistake configuring the domain-name on my ISE appliance. I issued to the no ip domain-name and then added the domain-name I'd like to show up. It seems to have partially worked, as the FQDN on the appliance is now correct but the redirect