Workflow delegation HRUS_D2

Hi ,
User A has set as delegate to user B.
That means when B receive the workitem it will be routed to user A.
Now my question is the same workitem will also present in user B inbox  or it will be disappear from user B inbox?
Regards,
Ramu .

Hi Ramu,
When substitute is set, both the users have the workitem in their inbox.
But when one of the user executes, then the workitem will get disappeared from the other user's inbox too.
Thanks and Regards,
Swaminathan

Similar Messages

  • Workflow delegation to Superior

    Hi
    I have to model a scenario. I just want to know is it possible to model or not.
    here is the scenario:
    A user sends a request for approval to Approver at level 1. If approver at level 1 does not respond to that , it should be delegated to the Approver Level 2( which is manager of approver level 1 ).
    Approver at 2 can then approve on behalf of approver 1 and then he approves for his part as well.
    2. Moreover this scenario is only requirement for one country and rest all the global members do not want this requirement. is it possible to filter the above mentioned scnario for the specific country grouping and rest will be using the normal workflow.
    Your guidance will be appreciated.
    Regards
    Waz

    Hi Waz!
    My initial thoughts on this is that its possible to create such a scenario.
    1.
    At the start of the workflow, create a fork (total branches : 2, necessary branches : 1). In the first branch, the workflow will send a workitem to the first approver. In the second branch, add a wait step (create a dummy step with dead line monitoring) and mention the delay you want there. And below this wait step add a step that will be sent to the second approver. And then end the fork.
    In this way, if the first approver does not approve and the wait period completes, a workitem is sent to the second approver. Note that the first approver still has the workitem. So now, whoever completes (approves) the workitem first, it doesnt matter to the workflow as the fork would reach its end point.
    After the first fork, you can then add the second approval step.
    2.
    In the second scenario, you can put a condition step right before the fork statement and check for the company code (or whatever parameter you want to use). If it meets the criteria, the workflow will route to the above approval mechanism. If it doesn;t, the workflow will proceed as usual.
    Hope this helps. Let us know if you need any further help. I would recommend to wait for other experts to reply, as there may be a better solution to achieve your requirement. Dont forget to reward points if the hint was useful!
    Regards,
    Anwar.

  • Workflow Delegation

    Hi,
    well we have a perticular requirement in our organisation. We have used the standard SAP functionality Workflow. Now we have a problem when any of the approver say "A" is on short notice, (Hospitilised..etc).
    SAP has provided an option to do substitution for individual SAP User ID. But in this case, if the user has not mentioned the substitution, can we maintain the substitution on behalf of the person "A" by any means.
    I want all the workflow item pending for approval with "A" to be forwarded to the person"B" for a pre defined period...may be 4days or 8 days. After which the remaining pending workflow will be available for approval with "A"
    Regards
    Vikat P Verlekar

    well Iam not sure about the transactions , which SAP may provided to maintian substitutions, but you have standard FM which can be done directly from SE37
    1. Execute the FM SAP_WAPI_SUBSTITUTE_MAINTAIN and to this fm the first import parameter is the one who want to delegate the work, and the second parameter is to whom he want to delaget the work, begdda and endda will say that till which dates this substitution is activate. so till the enddate the workitem whill go to the delegatee.
    SWRAGENT type both first and second parametrs so you need to pass some thing like this
    OBJID as  US
    OBJECT as SY-UNAME
    [SAP help|http://help.sap.com/saphelp_nw70/helpdata/en/8d/25f558454311d189430000e829fbbd/content.htm]

  • Delegating workflows as Admin

    Hi,
    Is it possible to delegate workflows as admin from BPELConsole?
    In the Worklist Preferences, there is an option to set up vacation rules that delegates all incoming requests to someone else.
    The same functionality can be done by an admin for a user who is the approver for a workflow.
    The workflows are built in SOA 10.1.3.4
    Thanks,
    Preethi

    Hi,
    Found the way for this... We basically wanted the ADMIN to perform the workflow delegation. I was wrong in asking if this is possible from BPELConsole.. but the same was possible from Worklist.
    By logging into the Worklist application as admin (oc4jadmin), one can see some the additional tabs. From the 'Manage Rules' tab, admin can delegate workflows for any user.
    Thanks,
    Preethi

  • Delegation BPEL workflows as Admin

    Hi,
    Is it possible to delegate a workflow as bpeladmin (or any admin)?
    There is a feature in Preferences in Worklist, where a user can set up rules to delegate his/her workflows for a period of time.
    I want to check if it is possible for an admin to do the same for a workflow from the BPELConsole.
    Also, is it possible to reassign the task instances which are already in initiated stage through BPELConsole.
    My BPEL workflows are built in SOA 10.1.3.4.
    Thanks,
    Preethi

    Hi,
    Found the way for this... We basically wanted the ADMIN to perform the workflow delegation. I was wrong in asking if this is possible from BPELConsole.. but the same was possible from Worklist.
    By logging into the Worklist application as admin (oc4jadmin), one can see some the additional tabs. From the 'Manage Rules' tab, admin can delegate workflows for any user.
    Thanks,
    Preethi

  • Workflow notification delegated to the originator contains an error message in notification content

    Hi All,
    We are using a workflow for managing User Access Request(to get new responsibilities) where approval hierarchy is set via AME rules.
    Facing an issue, when approver has set a vacation rule and to whom the notification delegated happens to be the requester itself.
    Notification contains an error message which says like: "Automatic route to <use name> failed. encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.reassign"
    However notification correctly displays its content and also the validation logic that we have put in post notification function while responding to notification is working correctly .
    Also If the vacation rule is set to some user other than requester, issue does not appear.
    Please guide if faced similar issue or any idea to overcome this.
    Thanks in advance!!
    Indu

    I r-clicked on the error message of the details "Request IDoc : Application document not posted" and selected "Idoc maint in OLTP" and then I saw the error message in the log.
    I see that my systems are off a couple minutes.
    Should I just reboot these sys's?
    DataSource 0TCTIOBJNM_TEXT has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 0TCTIOBJNM_TEXT does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 10/31/2007 11:54:29.
    The time stamp in the BW system is 10/31/2007 11:52:10.
    System Response
    The load process has been terminated.
    Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.

  • Delegation of Approvals (Approval Workflow in Purchasing Module)

    Hi,
    I am using AME(Approval Management Engine) to generate the list of approvers for all the requisitions.
    My requirement is:
    If a requisiton requires approval of 'ABC'. But ABC is not able to approve it because he is on leave. So the workflow should automatically be delegated to another approver.
    This situation also comes when ABC didn't approve the requisition for a fixed time. After that time limit it will be delegated.
    Regards,
    Sambit

    Sam wrote:
    ABC is not able to approve it because he is on leave. So the workflow should automatically be delegated to another approver.Setup vacation rule for the leave period to delegate the approval notification to someone else.
    This situation also comes when ABC didn't approve the requisition for a fixed time. After that time limit it will be delegated.Setup timeout in the workflow.
    Thanks,
    PS.

  • Delegation in workflow

    Hi ,
    please any body can explain what is Delegation and i am new to workflow so i need some stuff on delegation .
    Thanks in advance,
    Kishor kumar

    Hi KK,
    there are many threads on delegation in this forum which you can search for.
    check this link, in case...
    http://help.sap.com/saphelp_47x200/helpdata/en/fb/1359c4457311d189440000e829fbbd/frameset.htm
    Hope it helps.
    Aditya

  • Delegation problem in workflow

    I have created a subtype for BO BUS2012
    i want to define delegation for this new subtype
    but there is already a delegation defined for BUS2012 with ADB2012
    due to this i am not able to define a new delegation for BUS2012 with my ZBUS2012
    is it ok if i delete the existing delegation and define my new delegation?

    Hello,
    Please can you let me know the rationale behing developing a new sub-type when there is already a delegation in place for the standard SAP Business object?
    If a delegation is already presnt for the super-type Business Object, then is it not possible for you to define your custom code in the delegated business object? If you delete the existing delegation, you will loose the custom changes made in the already delegated business object. are you sure the already delegated business object is not used in the system?
    so, my suggestion is to include your changes in the already delegated business object rather than creating a new subtype.
    Please let me know if it helps.
    rgds,
    Raghav.

  • AR approval Workflow - how to delege, escalate & set remainders

    Hi,
    We have a lengthy approval process for Appropriation requests. (upto 8 levels of approvals). During the approval process, we are experiencing lot of delays in approvals due to people leaving organisations, going on long vacations and in some cases just ignoring the approval requests.
    We would like to set remainders, escalations and also delegate the approvals if possible.
    Pls suggest how to incorporate these functionalities into the existing workflow.
    thank you

    Hi,
    I do not have a solution for your requirement. But I have a doubt which I have already raised in this forum. Please follow the below link: https://www.sdn.sap.com/irj/sdn/forums
    It would be nice if you can give me your id which will be very helpful to me.
    regards
    Pratap.V

  • Add Company Code to customized extractor (User delegation task)

    Hello guys,
    Currently we have one report "Delegation" of Authority" that list all the delegations of authorizations among users for a certain period of time. These delegations of authorizations are related to the approval tasks using workflows.
    The report is done one the top of one Z* infoObject and data is brought from ECC by a Z* extractor.
    This extractor is database view that uses join conditions between 3 tables. The used tables are: SWWUSERWI (Current Work Items Assigned to a User), SWWWIHEAD (Workflow Runtime: Header Table for All Work Item Types) and HRUS_D2 (User Substituted by User).
    Due to a new requirement, it is necessary to add to the report the company code of the users (the one who delegates and the one who receives).
    The dificulty I'm facing is to find a table that has the company code and that I can link (join) with one of the previous tables.
    I have tried with table PA0001 (HR Master Record: Infotype 0001 (Org. Assignment)) where I have the company code of each person, but I cannot link this table to any of the other 3. I have checked also table DFKKWLI (Work Items) but it is not being maintained...
    Does anyone has tips that might help me?
    I would really appreciate!
    Thanks,
    Andreia

    Hi Rani,
    I need more information:
    1. Have u copied entire module pool "SAPMKPT2" which is main programe for KP90.
    2. You want to set the controlling area? for that u have to call "SAPLSPO4" program and Screen Number "0300".
    I think you mostly want to set the controlling area first and the "Delete Planned Costs"...please answer.
    Hope this may clear your idea too..
    Thanks,
    Chetan Shah

  • Workflow for Sales Order Release via Status Profile

    Dear all,
    i want to make a workflow for sales order which have 4 User Status in One status profile.
    Once Event triggered for sales order
    1.   Mail should go to main authority with sales order number.
    2.  Once authority will do some changes in the required field then he/she changes
         the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
    3.  Once again same changes in sales order but now user status-2 from user status-1
         as per line Item and mail should go to department no-2 (Head authority).
    4.  Once again same changes in sales order but now user status-3 from user status-2
         as per line Item and mail should go to department no-3 (Head authority).
    5.  Once again same changes in sales order but now user status-4 from user status-3
         as per line Item and mail should go to department no-4 (Head authority) .
    and parrally for each changes of Status mail should also go to User (Event Creator).
    6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
    Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
    please help me out.
    Thank You

    Hi Neeraj,
    First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
    Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
    As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
    The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
    Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
    Just go with these things and let me know if you get stuck up somewhere.
    Regards,
    Guddan

  • SAP Workflow not triggering due to "Start Condition return FALSE" message in SWEL

    Hi,
    I have SES approval workflow which is not triggering in few cases because of check function ends with exception even it has valid start condition and correct data. For example lets say we have PO no. 100 for which 3 SES (SES1,SES2 & SES3) are created. Out of which workflow for SES3 is not triggering even if all the three contain valid start condition(Bases on internal order at PO line item).when triggering workflow manually using SWUE for SES3 it work fine.Please find SWEL screenshot below and let me know if you have come across this type of issue.
    Thanks in Advance.
    Ishant.

    kindly use SAP_WAPI_CREATE_EVENT and not SWE_EVENT_CREATE it's always better to use APIs.
    Why use 2 sub-objects? you already have a z-object and you can modify it. even if there is a reason for the double sub object , the workflow should still run on the standard one - BUS2091.
    see for example :
    Extending Object Types: Inheritance and Delegation - SAP Business Workflow - SAP Library
    As for your question,
    if you are using a function module to raise the event, way not check in it if the service entry sheet has been created properly before creating the event. you can even check if the PO contains an internal order in your RFC function module and raise a specific event. then you will have no need for the starting condition.

  • Some doubts in Workflow

    HI Gurus ,
    I have some  doubt in workflow basically I know how to use them but i don't know what is functionality ,
    could you plz explain me , else suggest me
    1. why we have to do delegation , what happens at run time if we don't do delegation
    2. What is the diff between task and workitem
    Thanks
    Prasad

    Hello,
    I would suggest searching for "sap workflow" on the internet, buying a SAP workflow book and/or taking a SAP workflow course.
    regards
    Rick Bakker
    Hanabi Technology

  • Workflow  for po delivery date

    Hi
    Good morning to all .
    Well I am an abaper and new in workflow . i got a requirement  to mail a user two day before po delivery date .
    can any one guid me .
    Regards
    Rakesh kumar singh

    I think if you are changing the Delivery date you can track this as the Change Event of BO BUS2012 gets triggered. You can track what type of change by coding in a virtual attribute of your Custom BO which is delegated to standard BO. In the attribute you should code that filter the changes are relevant(Delivery date change) for workflow or not. If the changes are relevant the Flag will be set. In the start condition(SWB_COND) of Wflow you should make use of this Flag for triggering.
    Regarding sending mail at end of day this can be done using Requested start Tab of step in Workflow Builder.
    Thanks
    Arghadip

Maybe you are looking for