Workflow display as graphic text

Hi All,
In SRM workflow in EBP where from the text from display as graphic is maintained?
We have a one step shopping cart workflow in SRM 5.0(EBP) and ECC 6.0 as backend.
In our case once the Shopping cart is created and approved, the status is updated as approved and if
I go inside the item details --> Approval then if it is Display as table it shows approved by the agent name.
Same case if I see in display as graphic then the test Result approved is not shown as item approved by in the case of one step workflow.
In the case of no approval workflow it is perfect.
So do we maintain these texts somewhere to display.
Our WF consultant say it has nothing to with the workflow builder.
Any thoughts on this.
Best regards,
Sridhar.

Hi all,
Any updates on this.
How to change the text.Though there are no issues in WF other than this, this looks awkward with the text showing as incomplete Shopping cart approved by
Best regards,
Sridhar

Similar Messages

Looking for a graphical text popup program

I'm looking for a really specific type of program, and I don't really know where to start since I don't really know of a simple way to describe it and put into a search engine...
I want a program that will display a graphical popup on the screen with large text - something where I can type:
popup "test"
in the command line and a window or overlay will pop up showing "test" with a large font. The only thing I've seen that does this is Quicksilver for OS X: <http://www.oakinnovations.co.uk/blog/wp … arning.png>.
For clarification: I don't mean a fully automated desktop notification program, but if one of them can provide this feature, that would work.

skanky wrote:Also dunst and cat_osx I think it's called. I'll check it's package etc when I'm at my computer.
Right, it's called osd_cat, and it's available through xosd.
An image search will throw up a few screenshots.

Yahoo mail using firefox and windows 7 drops graphics text in boxes???

when in yahoo mail, the graphics text within action boxes, ie, send; move etc do not display. sometimes the box outlines do not display. any fix? site works fine with IE. was using 3.6 , tried going to beta 4 but has same problem

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

How to get data from list of values (LOV) to be displayed in a text field ?

Hi guys,
I am very new to Oracle APEX so please spare me if it is a silly question. How can I get the selected values from a set of list of values (LOV) displayed in a text field (or text area or so) ? Fox example, in my form I create 4 items: STATE, COUNTY, STREET, ZIPCODE and all of them are LOV (list of values). I also create 2 buttons (ADD & REMOVE). Then I create a test field (or text area name SELECTED RECORD). Now here is what I want to do with my form:
When I set the values for all 4 fields, I will click on the ADD button then I want those values be displayed in the text field.
For example, if the selected values are:
STATE = Alabama
COUNTY = Abbeville
STREET= 1 Street
ZIPCODE = 36310
And the ADD button is pressed. Then in the text field I want it displays like this:
Alabama,Abbeville,1 Street,36310
If I choose other values and click ADD again, a new line will be added into the text fields (text area). If I click the REMOVE button, then it will clear those two line in the text field.
Would it be possible to do it? Any help will be greatly appreciated. Thanks in advance.

If you can live with the page being submitted and refreshed, make your ADD button do a submit with a request value of ADD and make your REMOVE button do a submit with a request value of REMOVE.
Then create two computations (one firing with a condition of Request = ADD and the other firing with a condition of Request = REMOVE).
In the ADD one, concatenate the values together into the text area (most likely a PL/SQL computation wiill be what you want). In the REMOVE one, set it to null with a PL/SQL computation.
If you want it done without submitting the page, make the buttons each do a redirect to a URL but instead you will have to write two short javascript functions in the page HTML header to manipulate the field values. Each button would call each javascript function in an onclick event.

Smartforms,How to display different standard Text in a Text element.

In smartform,if I want to according to the different conditions,display one of the serveral different standard Text objects which all maintained in SO10 in a same text element,how to do it?
if i put them in serval text elements, each condition only display the corresponding text element,but the text content can not display in the same position.
Is there anyone can tell me?
thanks.

use Alternative to control it no problem
for example you want to display the different SO10 to same position TEMPLATE's row 1 col2
TEMPLATE1
Alternative case1
YES
INCLUDE TEXT1(display SO10) [set output option line1 column2]
NO
Alternative case2
YES
INCLUDE TEXT2(display SO10) [set output option line1 column2]
NO
Alternative case3
every case your SO10's text is always display at line2 column2
just try to test it ,you can know

How to display multple line text in a single cell in ALV?

Hi all,
I have 'Material Detailed Description' field in my ALV report, and it's taken from a multiple line text table. Is there any way so I can get this whole text to fit in a single ALV cell (not in single, but multiple line, as in original text data)?
Thank you.

Hi
If you want you can display this long text field in ALV but the allignment of the ALV not looks good. so generally we won't display them in the output,
instead, in the interactive list write the code to call that MM03 transaction, and the user can see that text in the transaction when ever double clicked on that MATERIAL field.
Reward points for useful Answers
Regards
Anji

How Do I Display HTML Formatted Text From A Data Table In Crystal Reports?

I'm creating reports in Crystal XI. The information being displayed in the reports comes from data tables where the text is formatted in HTML.
I've worked with Crystal Reports enough to know that HTML text pulled from a data table doesn't appear in Crystal the same way it does in a web browser. Crystal Reports ignores all the tags (...unless I'm missing something...) and just displays the text.
Someone far more Crystal savy than I (...who I don't have access to...) came up with a Formula Field workaround that tricks Crystal Reports into displaying some basic HTML tags. Here's that workaround:

QUESTION - Does any similar workaround exist so I can display an HTML Table in Crystal Reports? If not, is there any way to display HTML formatted text from a data table in Crystal Reports as it would appear in a web browser?

Hi Steven,
To display html text in Crystal Reports follows these steps.
1. Right click on the field and select Paragraph tab.
2. Under 'Text Interpretation' select 'HTML Text' and click OK.
I have tried using the way,but it never works.So reply me if there is any way to solve the issue

My iPhone 4s no longer displays photos or text in horizontal mode. Is there a reset option or a known way to have this functionality return?

My iPhone 4s no longer displays photos or text in horizontal mode. Is there a reset option or a known way to have this functionality return?

RRGarcia wrote:
My iPhone 4s no longer displays photos or text in horizontal mode. ...
It could be this... Orientation Lock
Settings > General > Lock Rotation..
Or...
Double-press the home button...
Swipe to the right until you get to the Portrait Orientation Button...

Display key and text by WAD command in custom structure hierarchy

Hi everybody,
I have a query using a custom structure with hierarchy layout. As usual the structure does only display its text as descriptions but I can enable the display the key in BEx Web by right-click on the analysis item --> Properties --> Characteristic --> Display. Unfortunately these setting can not be defined directly in the structure within the Query Designer.
For a workaround I put the query into a web template, in which I used the Set Presentation (SET_PRESENTATION) command to enable key and text display from the start. Hence I put that command in the wem template parameters Action Before First Rendering (ACTION_BEFORE_FIRST_RENDERING). Everything is working properly and makes me very happy.
But... there is one thing missing, I would like to implement... I want a toggle button, which allows the user to switch between key and text display and text display. Unfortunately setting the same command from Action Before First Rendering (ACTION_BEFORE_FIRST_RENDERING on a various button does not working. The button command only affects data rows of the leaves of the structure hierarchy. All parent nodes do not change their appearance.
Any ideas how to solve this?
Thank you for any helps and comments!
Sebastian

Hi Sebastian,
I have a similar problem. Can you help me? How did you set the entry in Member Presentation of Command SET_PRESENTATION to display key and text? I just found the values to set the only text or only key.
best regards,
Barbara

Display of long text message

Helllo Expert,
I want to display a long message, In module pool program . I have maintain the other message of the program in message class but the long message is not fitting into the message class. the message which I want to display is *"Data saved. Market group (&) and market super group (&) saved. Market (&), market (&) and market super group (&) saved" I have tried using text-xxx but it's not allowing after WITH only 4 field allowed.
Thanks .

You can use the function module
HELPSCREEN_NA_CREATE
to display the long text of the message!
Regards
Naren

How to Display 'purchase order text' in MM03 using report program

Hi Friends,
Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
'Purchase order text' tab displays purchase long text of particular material .
I coded as:
      SET PARAMETER ID 'MXX' FIELD 'E'.
      SET PARAMETER ID 'MAT' FIELD k_final-matnr.
      SET PARAMETER ID 'WRK' FIELD k_final-werks.
      CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
It displays Purchasing tab other than Purchase Order Text tab of MM03.
Please suggest me how can i solve this.
Is there any parameter id to set values for Purchase Order text tab

>
Madhu Mano Chitra wrote:
> I want how to navigate to MM03 'Purchase Order text' tab/ view using ABAP code.
> could any suggest me
You can call a transaction and pass it a BDC table that tells it where you want it to go. You have to work out for yourself what to put into the BDC table. The code below works for tcode CATSSHOW.
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
   CLEAR bdcdata_wa.
    bdcdata_wa-program = 'CATSSHOW'.
    bdcdata_wa-dynpro   = '1000'.
    bdcdata_wa-dynbegin = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'SO_STATU-LOW'.
    bdcdata_wa-fval = '20'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'ANDZEIT'.
    bdcdata_wa-fval = SPACE.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'PAST'.
    bdcdata_wa-fval = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    IF p_selscr = SPACE.
       CLEAR bdcdata_wa.
       bdcdata_wa-fnam = 'BDC_OKCODE'.
       bdcdata_wa-fval = '=ONLI'.
       APPEND bdcdata_wa TO bdcdata_tab.
    ENDIF.
    opt-dismode = 'E'.
    opt-defsize = 'X'.
CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

Displaying of a text file using JAVA in a browser.

Please can you give me the code for displaying of a text file using a bean and java coding. Please include all files needed. Thanks

please could you give us 200 Uss each for the work done for you plz include all needed recipes plz? thx

Display the all text entered for all folder at Item and Header level of PO

Hi everybody,
I have the task like the following :
In a PO there are text folders available at Header and Item level. I want POs with type Purchasing document type u2018ZFu2019 ( First Article PO ) should display all the texts entered into any of these folders either at Header level or Item level during print preview and PO output like Purchasing document type u2018NBu2019 ( Standard PO ).
u2022 The technical information relating above subject ( SAPScript ):
o The layout set ( form ): ZPCC_PURCHOR_STD
o Print program : SAPLMEDRUCK
u2022 The problems like the following :
o I found out the differences in debugging of 2 types of Purchasing document type u2018ZFu2019 and u2018NBu2019 .
o Only Purchasing document type u2018NBu2019 the print program processes Text Elements (HEADER_TEXT, ITEM_TEXT, SUPPL_TEXT) to display all the texts entered into any of these folders either at Header level or Item level.
o To control the displaying of Text Elements as I know I need a print program, however, our print program is standard print program of SAP system in this case. So I can not make any changes there.
Do we have the configuration place to this one.
Please help me to fix the problem. Thank you in advance !

Hi
I advise to use the subroutine pool as your sapscript is the bespoke one ( Z one) . So you can make use of the below pseudo code.
In the sapscript the point where you want to display the text include the following code (
Assume that your are print header text Then first find out the Co-ordinates for it .Go to me23n->Text tab-> In change mode -> double click on text editor-> which takes you to sapscript layout->Under Go to -> Click on header & get the following details.
Text name : ekko-ebeln
Language : ekk-spras
TEXT ID : F01
TEXT OBJECT : EKKO.
/: DEFINE &V_ID& = 'F01'
/: DEFINE &V_OBJECT& = 'EKKO'.
/: DEFINE &V_LINE1&
/: DEFINE &V_LINE2&
/: DEFINE &V_LINE&
/: PERFORM GET_HEDER TEXT in program Z_PURCHASE_TEXT
/: USING &EKKO-EBELN&
/: USING &EKKP-SPRAS&
/: USING &V_ID&
/: USING &V_OBJECT&
/: CHANGING &V_LINE1&
/: CHANGING &V_LINE2&
/: CHANGING &V_LINE3&
/: ENDPERFORM
&V_LINE1&
&V_LINE2&
&V_LINE3&
Now in the Subroutine pool Z_PURCHASE_TEXT
FORM GET_HEADER_TEXT USING IT_INPUT STRUCTURE ITCSY
CHANGING IT_OUTPUT STRUCTURE ITCSY.
LOOP AT IT_INPUT.
CASE IT_INPUT-NAME.
WHEN 'EKKO-EBELN'.
V_TEXTNM = IT_INPUT-VALUE.
WHEN 'EKKO-SPRAS'.
V_LANG = IT_INPUT-VALUE.
WHEN 'V_ID'
V_ID = IT_INPUT-VALUE.
WHEN 'V_OBJECT'.
V_OBJECT = IT_INPUT-VALUE.
ENDLOOP.
USE FUNCTION MODULE READ_TEXT BY USING ABOVE PARAMETERS AND READ THE TEXT AND FILL THE VALUE IN FIELDS IT_OUTPUT.AS BELOW.
BEFORE THAT FILL V_LINE1,2,3 AFTER GETTING A TEXT FROM READ_TEXT FUNCTION MODULE.
LOOP AT IT_OUTPUT.
CASE IT_OUTPUT-NAME.
WHEN 'V_LINE1'.
IT_OUTPUT-VALUE = V_LINE1.
WHEN 'V_LINE2'.
IT_OUTPUT-VALUE = V_LINE2.
WHEN 'V_LINE3'
IT_OUTPUT-VALUE = V_LINE2.
ENDLOOP.
ENDFORM.
Declare the valriable in the routine v_textnm,v_lang,.....
I hope this hint help you to resolve your issue. Note : the spelling of commands which i have wrote may be incorrect.
Cheers
Joginder

Problem displaying dynamically loaded text in Flash CS3

I created a Flash CS3 application that does not display
dynamically loaded text (from internal AS3 scripts) on 3/6 of my
client's computers. All computers run IE 6 and Flash Player 9. I
cannot replicate the problem on any computer in my department. The
problem seems to be related to Flash Player 9 or a browser
setting/IT restriction. Has anyone encountered this? If so, have
you found a solution?
If I cannot find a solution, then I will need to almost
completely redo the application.
One slightly insane idea I have considered is to, if
possible, convert dynamically loaded text to an image real-time. Is
that possible?
Btw, I have created a font in my library. Should I try
manually embedding the font from the Properties menu and selecting
all characters?
Thanks in advance.

yes, even though you may be using a font from the library,
you still have to specify that each text field that uses that font
embeds the font, and you'll need to select all characters(well not
all, unless you require all the different scripts of the world -
upper-case, lower-case, numerals and punctuation usual suffices).
I bet if you checked, the computers where the font did not
appear did not have the font on their system.
Good luck
Craig

Why are most websites only displaying code like text?

Almost all of the web sites that I frequent have began displaying code like text on a blank white background. Some sites still have hyperlinks and images here and there with random text, but others are fully blank with what appears to be the code of the website showing. I wasn't able to access this web site until I tried multiple times and it magically worked, but others are still not working. The only sites that I have tested that have worked from the start are Google related sites (Gmail, Google, Youtube). My yahoo email is inaccessible, which is an important email for me and all other sites that i frequent are inaccessible. One major thing to note is that the sites are also inaccessible on Internet Explorer. This would typically lead you to believe that the problem lies with your connection in some way. I have reset my router/modem and it had no effect. I also have ran CCleaner and have deleted temp files, cookies, and caches. I have tried running Mozilla in safe mode with add-ons disabled as well. My malware protection and antivirus protection find no issues after completing full scans. One last thing to note is that, on both Firefox and IE, certain sites allow to me to access the homepage, such as yahoo, but once I attempt to check my mail the random display of code appears. On IE it simply says that the site cannot be displayed once I click to check my mail. Gmail works perfect on the other hand. The only things that I have done during this time are:
Setup a LogMeIn account (Hamachi) and connected my PC to their service
Downloaded and began using Malewarebytes software to remove malware that I had picked up
Other than those two things it has been the same usual actions on my PC. Could the malware that I had still be effecting me somehow even though it was found/deleted? Is my router to blame even though resetting it does not help? After all the things I have tried, what could it be?

What is the content type of those pages if you check that via Tools > Page Info > General?
Is that text/html as it should be or text/plain as your screenshot would suggest?
You can also check the Net log via the Web Console (Web Developer > Web Console;Ctrl+Shift+K)
*https://developer.mozilla.org/en/Tools/Web_Console
*https://developer.mozilla.org/en/Using_the_Web_Console
This can be a problem with your firewall that modifies the server response headers if the settings in Firefox are correct.
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox
*https://support.mozilla.org/kb/Basic+Troubleshooting
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that works.

Workflow display as graphic text

Similar Messages

Maybe you are looking for