Workflow does not complete task in other languages
Hi,
I created an approval workflow on Sharepoint Designer 2013 set as Sharepoint Workflow 2013.
It worked fine untill some of our approvers came to find out that using other languanges as primary option on Internet Explorer the workflow stops. It does not cancel it, but does not mark the task as completed automatically as it does for the computers set
as English as primary language, therefore, the workflow stops until a manual completion of the task.
On the microsoft site I checked that Workflow Manager has the same files in any language.
I even found a Cumulative Update for Workflow Manager and it cames with a fix on languages. Question is: why there are no languages on the first installation?
These are the download center links:
Workflow Manager 1.0
Cumulative Update for Workflow Manager 1.0
I have figured out what's the cause of the problem.
There has been no changes in the agent assignment, so, SWU_OBUF is not needed.
The workflow hangs and states that there is no agent for the step in Ready status because the workflow was deactivated after the Release step. I think this has been deactivated by the system because there were errors that occured (perhaps in the container bindings).
The workflow template I used, together with the tasks, were copied from the standard template WS20000075.
Are there any procedure to just easily check the bindings?
Thanks.
Similar Messages
-
Workflow triggered via SWUE does not complete
Hello,
On an ECC6 system, I have a workflow linked to the BUS2009.RELEASESTEPCREATED event. As long as the event is triggered upon upon purchase requisitions creation, the linked workflow starts and finishes fine. However, in case I trigger the event "manually" using SWUE, one of the work items(approver release decision task) created by the started workflow does not change status to COMPLETE after it is executed and successfully processed with a valid outcome. The work item remains in the in-process or ready status.
I have also checked the instance linkages and found a proper entry for the instance ID.
Due to this I am not able to trigger the workflows missed during recent event linkage outage.
Any idea what can cause this behaviour, please ?
Thanks.
Kind regards,
Ondrej FoukalHello,
You say:
"one of the work items(approver release decision task) created by the started workflow does not change status to COMPLETE after it is executed and successfully processed with a valid outcome"
If it's successfully processed and has a valid outcome then maybe you're having a problem with the next step - perhaps agent assignment? Check the workflow log for any errors, and look at the graphical log.
regards
Rick Bakker
Hanabi Technology -
Form Filler Yellow Task Bar Link Does Not Open task or do anything SharePoint 2010 InfoPath 2010
Form Filler Yellow Task Bar Link Does Not Open task or do anything (SharePoint 2010 InfoPath 2010)
Using a SPD workflow to run a approval process. This is a non-browser form. User receives task notification, opens form in IP Form Filler and sees yellow task bar notification. User Clicks on open task, nothing happens... OS = XP, On Win7
= We get a never ending download box, and several logon security windows
Attempted Fixes
Clear
InfoPath Cache
Workflow History Looks goodHi,
I understand that when you click on Edit this task in the message bar in InfoPath 2010, nothing happens. Does this happen when you open the email which contains the ‘Edit this task’ link?
If so, you can try to check whether this key is in your regedit. If so, you can delete this key and have a test.:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{00000000-0000-0000-0000-000000000000}
Back up the regedit keys before making any changes. For more information about backup and restore the regedit, please refer to these sites:
Fix “Edit this task” In Outlook 2007:
http://vettekerry.wordpress.com/2008/06/11/edit-this-task-in-outlook-2007-doesnt-work/
How to back up and restore the registry in Windows XP:
http://support.microsoft.com/kb/322756?wa=wsignin1.0#method1
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
Automatic approval workflow does not work anymore
Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
TimHi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears -
AFX 2014.1.1 does not completly close
When I try to close AFX, it is still showing 2 instances of AFX and quicktime still open in Task Manager. I have to manualy close them to be able to reopen AFX. This sometimes happens with Premiere also. The programs will not reopen until I either do this or reboot.
This happens every time I use AFX and once in awhile with Premiere. Mike Daniels
From: Szalam <[email protected]>
To: mike daniels <[email protected]>
Sent: Monday, November 17, 2014 9:44 AM
Subject: AFX 2014.1.1 does not completly close
AFX 2014.1.1 does not completly close
created by Szalam in After Effects - View the full discussionDoes this problem happen frequently? If so, how frequently?How many times in a day do you launch and close After Effects? What about Premiere Pro?I have had this issue happen, but very, very rarely. It may be a Windows issue because I'm also on Windows 7 and it's happened with non-Adobe software too (C4D). If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6937459#6937459 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6937459#6937459 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in After Effects by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it. -
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
Visual Approval Action does not complete
Hello,
I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
"Cannot complete action: The activity could not be read"
When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
Any help would be highly appreciated...
Regards,
AnilGeorge,
Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
Please help. -
when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD -
Hello, I live in the German speaking part of Switzerland (and have a credit card address here too) but want to watch films in English, Italian, or French. Why are films not available in these other languages ? Unless I am mistaken, iTunes Switzerland is far from Swiss and does not encourage its people to watch films in the local languages of its country (at least French and Italian would be good too...). Can anyone help ? Do I have to move to Geneva to watch a non French film in French or Lugano to watch a non Italian film in Italian or simply buy a DVD to get round it?
I have the same problem. I want to watch any movies in French (in the original, or subtitled and/or dubbed). But I cannot seem to find any on iTunes. Does iTunes offer any content in other countries (I live overseas) in the languages of those countries?
-
I can't get iWeb started. It does not complete the starting procedure
I can;t start iWeb. It does not complete the startup procedure, and then becomes frozen. I've installediWeb 3.04, but same results. What can I do?
Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
Happy New Year -
When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue
The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!! -
When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari -
my ipad streaming purchased video from itunes stops every few seconds. This does not happen with any other streaming video service. I have restarted and rebooted already.
I've tried both things, but video still stutters.. Have also tried removing profile, and complete reinstall of firefox.
I'm on 24 Mbit cable and the only user atm. IE and Chrome seems to work without stuttering.
I've having this stuttering every ~5th second, like a small "1/4 sec buffering".
Maybe you are looking for
-
My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?
Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?
-
Why am I having so much of a problem downloading Lion
I have a MacBook Air and I'm trying to download the new Lion software. It's not downloading! Anyone know why?
-
I don't have a functional disk drive on my laptop, but I have the program backed up in Time Machine. I know there were some folders created elsewhere (library, I think) & I just want to make sure that I am not going to mess it up if I just select Mic
-
Notification not reaching SAP inbox
Hello All, I have created a new workflow. Everything is working fine in Developement System. I transported this to Quality system. Its showing workflow log is correct.But user is not receiving any notification in mail box. Task is dialog step. Agent
-
Maximum number of sessions is capped at 3
After installing a demo license for Web Tools 2007.0.625, I get the following error message: Maximum number of sessions is capped at 3. License is for test purposes only. Why would this happen, and what can I do to resolve it? I've tried restarting I