Workflow does not work properly

Hi experts,
I had configure approval process for my folder. The problem is when i upload a file, there is no email sent for approval. I have a FSDB repository. What went wrong? Appreciate any suggestions.
Thanks,
Nanie

Hello,
Workflow does not start automatically by uploading documents.
You have to Submit for Approval these documents.
Regards
BP

Similar Messages

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

My Mac App Store on my MacBook Pro does not work properly.

My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help

Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
Good luck

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

RH 5.5 output does not work properly in RH 7

I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.

When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3.

Flashback Reclaimable Does Not Work Properly

We saw the strange behavior of flashback reclaimable space as it does not work properly if the PERCENT_SPACE_USED of v$flash_recovery_area_usage is near to 100 (99.9x). As we are running Oracle 10gR2 (Cluster & RAC) to manage our production RAC database, it is a two node RAC. on IBM AIX 6.1
Today at 9:00 AM, we observed that 97% reclaimable space was available. And db_recovery_file_dest_size is 460 GB out of 600 GB (mount point). No other process is being used this mount point for any IO, it is reserved for flashback only. We left 140 GB space free on mount point to over come any dynamic space requirement for flashback.
At 10:00AM we received out of space message in alert log file and during 9:00 AM to 10:00 AM 10 to 15 archive logs were created and at 9:50AM some archive log were also deleted automatically by oracle server(default behavior). Please see the output below.
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.9 98 1520
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
It is really a strange behavior, please is there any one who face the same issue or what may be the reason for this ?
regards,
Edited by: user13656883 on Jul 18, 2011 11:27 PM

Dear CKPT,
we daily have 3 times archive log backup and after every backup we do crosscheck. as is mentioned earlier, 99% space was shown as used and but on the other hand 97% space was also shown as reclaimable. so on these bases we are very confused , why oracle behaves like this and throw error in alert log as below
ORACLE Instance rac1 - Archival Error
Mon Jul 18 09:59:08 2011
ORA-16014: log 1 sequence# 39143 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/u02/oradata/rac/redo01.log'
Mon Jul 18 09:59:08 2011
Errors in file /u01/oracle/product/1020/db/admin/rac/bdump/rac1_arc0_3212156.trc:
ORA-16014: log 1 sequence# 39143 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/u02/oradata/rac/redo01.log'
Mon Jul 18 10:04:13 2011
Errors in file /u01/oracle/product/1020/db/admin/rac/bdump/rac1_arc1_3277694.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 493921239040 bytes is 100.00% used, and has 0 remaining bytes available.
Mon Jul 18 10:04:13 2011
regards,

Workflow does not work properly

Similar Messages

Maybe you are looking for