Workflow Error out while intiatiating forms(Hcm Forms and Process)

Hi All,
Our workflows are getting error out when forms are initated from Portal.
Workflows are getting triggered when it comes to a task(all type of tasks) its getting errored.
"An exception with the type CX_SY_REF_IS_INITIAL oc curred, but was neither handled locally".
what i came to know is for users with SAP_ALL access in the R/3 workflow is not getting error.
without SAP_ALL its happening.
Please if anything is missing in configuration.
Thanks,
Santosh

clearly correct authorisation is missing for the employees
and ensure the WF task is set to general in PFTC> Please verify this and you can do a trace too
as indicated
you can start via Hrasr_test_process

Similar Messages

BO CMC Crystal Reports : An error occurred while creating a subprocess in the processing server. [RCIRAS0603]

Hi All,
I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error while opening the previous instances of the crystal report in BOCMC.
I am trying to run or schedule the report but it is always going to "PENDING STATUS".
(Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
Could you please suggest.
Details :
Crystal Reports 2008
Clarity 13
Server Details:
BO XI 3.1 SP5
OS : Red Hat 6
Patch X11
Symptom
" Crystal Reports 2008/2011/2013 Processing Server fails to create child
processes after applied X11 client libraries security update on Redhat
Linux 6
" "An error occurred while creating a subprocess in the processing server.
[RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BI

Hi Rajeev,
This is a known issue you can refer to below note,
2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
Regards,
~Shree

An error occurred while creating a subprocess in the processing server.

Hi,
I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
Did anyone face similar issue? Is there any resolution for the same.?
I have deleted the report from enterprise and saved it back, still facing this problem.
Appreciate your help in this regard.
Thanks
Ravi

Crystal Reports processing (CR Page) server is not operational.
There could be many reasons for this.
CR processing server traces will need to be enabled and analysed by support.
You should also be on the latest patch release.
Sometimes following steps help :
1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
2) Once all processes are stopped ensure the serverpids directory is empty
<install dir>/bobje/serverpids/
If any files are within the 'serverpids' folder, remove them.
3) Go to bobje/tmp
Remove any MW, .MW, mw, .mw and regss files and/or directories
4) Go to /tmp
Remove any MW, .MW, mw, .mw, and regss files and/or directories
5) start servers back up.
If this doesn't help - you'll need to open a Support Incident

Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
"An unknown error occurred while trying to start the collection process."
I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

Hi,
This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
and Team Foundation Server.
You have problems when using Concurrency Visualizer Extension, please ask in
the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem.

I get the message "an error occurred while loading your favorite themes" and my persona rotator won't work. Please help?

I usually use the Persona Rotator using My Favorites as its themes to rotate. Lastely my rotater has not been working. I click on Tools, then Personas, then My Favorites and am asked to sign in to use my favorites with the Rotator. I follow all these steps and all seems to go fine, except my Persona Rotator does not rotate. Again I click on Tools, Personas, My Favorites and there is a message saying "an error occurred while loading your favorite themes" and therefore won't work. I don't know what the problem is or even exactly when it started, but it doesn't work and I'm most disappointed. Please fix or help me to fix it so I can enjoy my rotating themes again.

In order to switch to another persona that you had previously installed, do the following:
#Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
#Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
#Find the one you want to use and click the ''Enable'' button.
To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

2010 Review Approval Workflow Error - Outlook cannot open a new form

Hi,
I set up an Approval - SharePoint workflow on a document library list in a webpart. When the approver got the email and tried to approve from outlook, she received the following error. She has approved documets in the past for the same page.
Can anyome please help me troubleshoot this? So much appreciated!
Word Error:
Could not open. http://<site ulr> _layouts/formsResource.aspx?templateFile=http://<site url_catalogs/wfpub/Approval - SharePoint 2010/Review Approval_Task_1033.xsn
Outlook Error:
Outlook cannot open a new form. To open the file, access to the folliwng form template is required
http://<site ulr> _layouts/formsResource.aspx?templateFile=http://<site url_catalogs/wfpub/Approval - SharePoint 201o/Review Approval_Task_1033.xsn

can she open the approval form in web browser instead of Outlook?
According to the error message, it seems that the user does not have permission for the file http://<site url/_catalogs/wfpub/Approval - SharePoint 201o/Review Approval_Task_1033.xsn.
can she open see this file in SharePoint designer 2010? that is, open the site with SharePoint designer and navigate to All Files->_catalogs->wfpub->Approval - SharePoint 201o. If she can not see the file there, ask the workflow creator to publish
the workflow again. I had experienced strange issue in SharePoint designer 2007 and solved by check out all the workflow files and check in again
http://social.msdn.microsoft.com/Forums/en-US/sharepointworkflow/thread/b533cfa5-e858-4ff9-bd0d-96d19946b789.

Unable to delete the error out record in Pending transactionsinterface form

Hi Team,
Help me having this issue....
"Unable to delete the error out record in Pending transactions interface form".
Version:11.5.10.2
Regards,
Arul

Can you please give a more elaborate context?
What application, responsibility and form, how are you trying to delete from the interface table, from front-end or via API?
Thanks
JD

Error opening form(HCM Forms and Process) in ESS

Hi,
Im getting following error when im trying to open form from ESS.
The following error text was processed in the system IED : Web Dynpro application /PAASRFORMSTEP/EDITFORMAPP does not exist .
I have created Resource and assigned it to Service through SPRO
Resource Parameters:-
Directory Path   = paasrformstep
Object Name     = EditFormApp
URL Parameter = sap.xss.disablehdr&Process=Process Name
also i have given PCD of the Page in URL of Page
Service Parameters:-
Service Type     = WebDynpro Java Application
Link Resource   = Reasource Name
Proxy Class       = CL_HRASR00_PROCESSES_AREAPAGE
Please let me know if im missing anything
Thanks,
Santosh

Hi Santosh,
1. Check whether namespace sap.com/paasrformstep even exists on your portal. Take a look at the content administrator of WebDynpro Tools. Should be "http://server:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer"
2. Make sure you don't have any Typos in the Service-Name of your iView (case sensitive!)
3. Check your NWA monitoring trace log where you can see the java stack and see where the error actually occurs.
Also, maybe this thread helps:
Web dynpro abap login ,WebDynpro Exception: Application // Does Not Exist
best regards, Lukas

Drop down lists in Interactive forms:HCM Forms&Processes

Hi Experts,
I am working in HCM Forms and Process.
I have 2 dropdown lists in my interactive form such as COUNTRY, STATE. The STATE dropdown should be populated based on the COUNTRY field dynamically.
I have written the logic for STATE dropdown in the method GET_STATES of Custom Generic Service Implementation Class and that method is used in the OPERATION of FIELDGROUP in Form Scenario.
The Java Script in the EXIT event for COUNTRY is as follows.
xfa.record.CONTROL_PARAM.ISR_EVENT.VALUE = u201CGET_STATES";
app.eval(u201Cevent.target.SAPSubmit();u201D);
Still the the STATE lists is not populating in the form in Portal.
Please provide some valuable inputs on this.
Thanks in advance

Hi Mukesh,
Thanks for your response.
It seems the script is not triggering .I didnt get the alert message.
I am working in Citrix and SAP GUI 710 has been installed now. Still, I can't insert Webdynpro Script. It is showing one error "Error while inserting Webdynpro script".
Earlier, in SAP GUI 640, I was able to see with the Data view with the interface import parameters. Now the Data view(Left side of Layout) has no elements , although the form is linked with an Abap dictionary based interface.
Do you have any idea why these kind of errors are coming? Is this the problem with Citrix ?

1142 errors out while downloading image

I have a 4402 controller just recently upgraded to code 5.2.178. I have a new 1142 out of the box and I am trying to get it up and running. It finds the controller and starts the image download but then stops with the following error:
capwap_image_proc: problem extracting tar file
It then tries to reconnect to the controller, it finds it and errors out again.
Figured I'd ask for some ideas here before I went to TAC.
Thanks

Hmm not much to go on here... You know I collect Martin Guitars (to digress here a bit) and at these Bluegrass festivals I like to attend once in a great while they have a bumper sticker that's pretty popular.. it says... "It takes a village to tune a banjo"... at risk of sounding like the village idiot when you have a problem like that... you simply got to take it apart... meaning you can't tune a guitar or banjo without another one (or tuner etc) so you threw an 1142 out there and it's whining.. ok.. I'm thinking this...
1. Does another 1140 do the same thing (where's the other banjo)
If no, you have a bad AP. If YES then..
2. Have you tried to download a new version of controller code and flash the controller again? Maybe during the process the code it pushes to the AP got corrupt? If so that's why the AP rejects it remember the controller holds that image for the AP.
If you flash it and it still won't talk to the AP.. then what's your network look like.. maybe the image is getting hosed across the network or through something in the network.. break the network down into something easy see if it still fails.. (if it works that's the answer) if it doesn't... time to find another controller.. From the problem description there just isn't enough stuff here to rule out what is broke...
TAC is a good village to help you tune that Banjo but I don't think you need them for this... ..

AMS 4.0 errors out while creating RTF StatusCheckStep error: Package creati

Hi All,
OEM: 11g
Oracle Apps:12.1.3
O/S: AIX 6.1
While creating rtf through AMS 4.0, we are getting the error message:
Error while evaluating expression:[Error evaluating expression: ${FUNC_STATUS_CHECKER(${data.V_BUGNO})} : [StatusCheckStep error: Package creation request failed
(Status:Completed Error - Initialization Failed).]]
Could anyone please share the resolution to the above issue faced before!
Thanks for your time!
Regards,

Hi,
perhaps my help is still useful.
On the end of the Customization Manager procedure you will find a status checker. The purpose of status checker is to review the individual steps and highlight the job/job step under trouble.
In your case, one of the sub jobs, here "Package creation request failed" is erroring out. It can be that the AMP plug in is not completely configured, or requires a patch.
You should run as first the diagnostic for Customization Manager, to see if the expected configuration is in place. You may also drill down to the individual step logs (within job details) to check if there are any further details.
Regarding rft: usually you use rtf in combination with BI Publisher. If this is the case, please make sure that you have entered the right $Header$ string
into the properties for your rtf. This is required to inform adpatch to which data source the rtf belongs to.
Please let me know if this response is helpful for you.
Kr, Volker

FTP Adapter Errors out while translating

Hi,
I am using a FTP adapter to put a text file using a bpel process. But the FTP adapter errors out with the following error:oracle/xml/parser/schema/XMLSchema
Is there a way to fix this issue?? Please advise.
Thanks
PS

Hi,
To do the alert configuration as suggested, please go through the information below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope I have answered your queries. If u want help with anything else please do reply back.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

VS Workflow - Erroring out when multiple records are created by same user

Hi,
I am using SP 2013. I have a visual webpart and custom sequential workflow. The webpart saves the data to a custom list and the workflow is associated to the custom list on Item creation only. In the workflow, I am breaking the role inheritance and setting
permission to specific set of users, and then the normal approval workflow happens. The whole workflow condition works fine, but if the user is raising multiple requests one after another, the workflow seems to break either in the Break inheritance or granting
permission. If the user raises only one or two requests then everything works fine.
Below are the errors which I am getting in the workflow:
Error 1:
Error: Save Conflict. Your changes conflict with those made concurrently
by another user. If you want your changes to be applied, click Back in your Web
browser, refresh the page, and resubmit your changes.
I have already checked this :
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/60ab04fd-9650-427d-a48f-784bc22fae05/workflow-and-save-conflict-your-changes-conflict-with-those-made-concurrently-by-another-user?forum=sharepointdevelopmentprevious_
http://adrianhenke.wordpress.com/2010/08/20/sharepoint-error-save-conflict-your-changes-conflict-with-those-made-concurrently-by-another-user/
I have also implemented the "Reload" thing posted in the above URL. This error only happens when multiple new requests are getting raised by same user. This error does not happen if I terminate the workflow and re-start the workflow.
How to fix this?
Thanks

Hi,
Based on my understanding, you have a Visual Web Part for adding new item into a list. A workflow will be triggered when item creation in this list. Everything works
fine except when an user adds multiple items in a short period.
If this is the case, plus with the error message, a possible cause is that the SharePoint Server and the workflow engine are not functioning effectively enough to
handle the multiple request in a short time, therefore a scenario is that when there is new item being added into the database, the workflow modifies the “RoleAssignments” property of this item at the same time, this may cause a “Save Conflict” error.
As you said, “If the user raises only one or two requests then everything works fine”, a workaround is that you can disable the adding item function in Visual Web
Part forcibly in a specific period after a new item is being added by current user, it can leave some time for handling the item creation and item modification.
Or if there is a need to submit multiple items concurrently, we can organize the requests into one request, then handle this item with other custom logic in your workflow.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Error Message While Running Sequence from Planning and/or SmartView

Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.

Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb

Workflow Error out while intiatiating forms(Hcm Forms and Process)

Similar Messages

Maybe you are looking for