Workflow Event not triggering

Dear SDN,
I have created a Workflow and i am triggering through an event . For this have created ZEvent in ZBOR(Modified from Std. APPR_DOC)and attached the zevent in my screen (HR related template PHAP_CATLOG_PA) through oohap_basic.When I run in Background everything is working fine.But when I run through the Tcode(PHAP_CATLOG_PA). event itself not triggering.Problem is my event is not firing.When I check in SWEL my zevent is showing std BOR.My zevent is not catching my ZBOR.Can anyone help me out with this issue.
Regards,
Gopi.

Hi,
gopi BOR will always show the standard BOR and you can put a start condition based on that condition.
after that in first activity you can use your custom BOR and it's methods.
Hope magic Works!
Regards,
Purvesh Patel.

Similar Messages

FMBB Budget Approval workflow is not triggered

Hi Experts,
I want to activate the standard workflow for Budget Approval in FMBB t-code. I found two standard workflow templates for this WS12300025 and WS12300026 and I activated it. In both workflow templates start event is maintained as 'BUS0050' 'PREPOSTEDDOCCREATED' .
But when I am creating Budget document in FMBB t-code, 'BUS0050' 'POSTEDDOCCREATED' is triggering , so the standard workflow is not triggering.
Then checked in forums, that we should maintain SPRO settings. I maintained the setting in SPRO.(Attachment 1).
After maintained this setting I am facing an error while creating Budget in FMBB t-code. (Attachment 2).
Kindly help me on this is urgent .
Thanks & Regards
Ayyappan.V

Ibrahim, The complete statement is:
If event linkage not activated it (Workflow Instance) will not get traced i.e. in T-Code SWI2_FREQ, thats the reason I have suggested to check error message in SWEL .
SWEL will always create entry whether linkage is activated or not, the only thing is trace should be on in T-Code SWELS. Hope things are clear now.
BR,
Prakash

My Customized Workflows are not triggering

Hi All,
I customized workflows.But in SWEL my all customized workflows are not triggering from the last two days..Before it was working..In SWE2 also done properly and SWU3 also fine.
Please give suggession whereis the Problem?
Regards,
Soni

If you look at the details of your event linkage entry (transaction SWE2) you will find that the "Check function module" field is not empty. The function module, when executed for the event you created, raised an exception - which is the standard way for a check function module to prevent a workflow from starting.
The check function module could be one set up for a workflow start condition, namely SWB_CHECK_FB_START_COND_EVAL. If so, check the workflow start conditions for your workflow (transaction SWB_COND).
Otherwise, examine the check function module's code to determine what it checks and why it prevents your workflow from starting.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b027453d11d189430000e829fbbd/content.htm">SAP documentation: Using (event) linkages</a>

Event not triggering workflow always

Hi,
I have a parallel approval workflow which I trigger everytime I receive a decision from a UWL.it works fine but in some cases all the decisions are not received by the workflow.
Steps: I receive the decision from UWL via a RFC
I trigger the workflow with the decision using SAP_WAPI_EVENT_CREATE.
However sometimes out of 5 decisions only 4 reaches and the workflow never completes since I wait till all the decisions are received.
After triggering the event I also update a table which shows correct values meaning the data is correctly passed from UWL.
Not sure what can be the cause. Anyone any ideas.
Thanks
Papiya

Hello,
Either the event isn't being created, or the event is being created ad the workflow isn't triggering.
Check tx SWEL (event trace, turn on with SWELS) to see if SAP_WAPI_CREATE_EVENT is creating the events.
It will also show you if a workflow is triggered, and what the workitem id is. It will also show any errors.
regards
Rick Bakker
Hanabi Technology

Asynchronous Business Object Event not triggering Workflow

Hello everybody,
I created a workflow for processing of inbound messages (IDoc). The workflow is correctly started when an IDoc arrives. Then it prepares some data and runs into a waiting step. After the user processes the messages via a custom transaction, the workflow should proceed and send some additional information to the message origin.
I created a new BO with an event ProcessComplete, which is called in the custom transaction via the following code:
INCLUDE <cntn01>.
DATA lo_zisu TYPE swc_object.
swc_container lo_container.
swc_create_container lo_container.
swc_set_element lo_container 'VAR1' lv_var.
swc_create_object lo_zisu 'ZABC' lv_object_key.
swc_raise_event lo_zisu 'ProcessComplete' lo_container.
But when I call this code, the workflow does not continue. When I use SWEL to manually create an event on this object, the workflow only continues when I set the check box "synchronous call". So in some way, the asychronous calls disappears completely.
Can anyone give me a hint, where to look for these calls? May there be a setting not active on the system for this particular workflow? Other workflows with the same method of event handling work well.
Thanks and regards,
Christoph

Hello,
I debugged deeper into the whole issue. When I call the function module for the event creation directly (not via the macro posted in my initial post), I have the option to control syncronous va. asynchronous processing:
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
    objtype              = 'ZISU_MDC'
    objkey               = lv_objkey
    event                = 'ProcessComplete'
    start_recfb_synchron = 'X'
IMPORTING
    receiver_count       = lv_rcvcnt
    event_id             = lv_evtid
TABLES
    event_container      = lo_container
EXCEPTIONS
    objtype_not_found    = 1
    OTHERS               = 2.
The export parameter start_recfb_synchron controls this. In the program flow, the following is the difference between the two ways:
Synchronous:
      CALL FUNCTION im_handler->m_linkage-recfb
           DESTINATION im_handler->m_linkage-rfcdest
           EXPORTING
             sender                   = l_sibf_object_por
             event                    = l_sibf_event
             rectype                  = l_sibf_rectype
             handler                  = l_receiver_por
             exceptions_allowed       = 'X'
             xml_size                 = l_xml_size
             event_container          = lt_xml_container
           IMPORTING
             result                   = l_result
           EXCEPTIONS
             temp_error               = 1
             OTHERS                   = 99.
Asynchronous:
      CALL FUNCTION im_handler->m_linkage-recfb
           IN BACKGROUND TASK
           AS SEPARATE UNIT
           DESTINATION im_handler->m_linkage-rfcdest
           EXPORTING
             sender                   = l_sibf_object_por
             event                    = l_sibf_event
             rectype                  = l_sibf_rectype
             handler                  = l_receiver_por
             exceptions_allowed       = ' '
             xml_size                 = l_xml_size
             event_container          = lt_xml_container
      CALL FUNCTION 'ID_OF_BACKGROUNDTASK'
           IMPORTING
                tid = l_trfc_id.
The first one works fine, the event gets processed, there is an entry in SWEL, the workflow continues. The second way does not work. The second function returns a tRFC ID, but when locking tRFC in the debugger and search for the call via SM58, there is no entry.
In parallel I opened an OSS message, but did not get any (useful) response yet.
Regards,
Christoph

BSP Terminating event not triggering

Hello Friends,
We have a scenario, where a BSP application is triggered from a Workflow, for a certain approval, and after the user clicks on Approve button on the BSP Page, the BSP would write to the workflow container using SAP_WAPI_WRITE_CONTAINER and then we call SWF_WSC_CALLBACK_LAUNCH.
This used to work, but after an almost Fatal incident with our system, we are not able to get this to work.
We can see in the workflow log that the container is written, but the terminating event is not triggered, and the workflow doesn't move forward
Is there a setting that we're missing..??
Thanks,
Tat.

Have you tried:
call function 'SAP_WAPI_DECISION_COMPLETE'

URGENT:PR event not triggering

Hi Experts,
I am creating a PR through me51n.It should create an event of BUS2009(Releasestepcreated).But not event is triggering.Is it related to some setting in SPRO.Please help me

Hi Vivek,
Hope you have gone thru' SAP help for the customizing requiredfor this scenaro.
Pls re-check all your customizing steps from MM side and also if you have mentioned the workflow indicators in the MM config, which indicate that workflow has to be used for release starategy.
Regds,
Akshay

BUS2032 - ALECHANGED event not triggering

Hi Gurus,
I have a issue in our dev system. In our system automatic PO creation is configured through Sales order.
This is working fine in Regression and production systems, but not working in Dev system.
I have compared the Regression and Dev system and I found that the ALECHANGED event is not triggering in our Dev system.
I have checked the Item Category of the Sales Order and it is same in both the systems.
And also I have checked all possible Workflow transaction(SWUE, SWEL, SWU3, SWU0, SWETYPV), everything looks same in both the systems.
Now I am not sure what to check and where to check.
Please let me whereelse/whatelse I have to check. Is there any ALE configuration to be checked.
Thanks for your help in advance.
Thanks,
Murali.

Hi Susan,
Thanks for the reply.
I know there could be some config missing but don't know what config it is.
There are more than 100 users in our Dev Systems, so I can't check the transports. It would be helpful for me if I get specific TCodes or areas so that I can compare my dev system with other systems where it is working fine.
Thanks,
Murali.

Subtype event not triggering and supertype event triggers twice!!!!!!

Hi,
We have created a subtype for object bus2030 and also an event created for that. My workflow should trigger whenever an inquiry is created.
I've maintained this as triggering event in SWDD and done type linkage is SWE2 and everything looks fine.
When i simulate or create event the WF is triggered but when create inquiry in VA11 WF does not triggers.
I've checked SWEL for event trace but no event is triggered at all... Am i missing something... I've done almost everything that i used to do...
Even synchronized buffer!!! nothing paid me a solution...
Infact the same was working with 3.1i system but after migration to ECC6 we had to create new WF template for the same Process.
Now I also see that the supertype bus2030-created event is triggered twice but, obviously no receiver type exists. But the zbus2030 event is not being triggered at all!!!!
Kindly help me understanding my mistake...
Regards,
PB

Hope you have already set the deletegation in SWO6.
Now, event dont get triggered automatically, jus because they are defined in object. They have to be explicitly published in thesystem.
Check for a suitable user exit in your transaction, which makes use of function module to create the event, from that you know how to proceed.
If you dont find user exit, try other triggering techniques such as change documents, logistics, BTEs... etc.
regards,
Sandeep Josyula

BSEG.CREATED event not triggering when a document is posted in FB60

Hi All,
I have a requirement in which i need to post documents in FB60/FB65/FB01 tcode. But when i post the document in FB60 the event BSEG.CREATED is not triggering. I could not see any trace in SWEL. But when i park the document in FB60, FIPP.CREATED event is getting triggerd.
Can anyone tell me why this BSEG.CREATED event is not triggering.
Thanking you in advance,
satheesh.

Hi Viji,
Thanks for your quick reply.
We have maintained the required configurations in the system related to this. But still the event BSEG.CREATED is not triggering.
for this the alternative solution is to implement the BTE '1030'. But our functional team is asking us to check whey standard business object BSEG.CREATED is not triggering when we post a document. So that particular reason we are not able to find out.
Configuration maintained.
1) Created a workflow variant and assigned it to particular company code(OBWA and OBWJ).
2) Checked the 'Posting' release' and 'Release payments' checkboxes in the OBWA transaction.
3) Event linkage for BSEG is active.(SWETYPV)
Thanks,
satheesh

Workflow is not triggered via program RBDMANI2

Hi,
We have a Workflow that triggers when an IDOC ends up in an error. It works fine when the IDOC is posted through XI and also when processed from WE19. When we try to re process through the Program RBDMANI2 the even is not triggered.
Business Object used: ZIDOCAPPL (Subtype of IDOCAPPL delegated to IDOCAPPL).
Event: INPUTERROROCCURED
My doubt here is will an event be triggered when an IDOC is Processed through RBDMANI2 program? If yes then am i missing or is there some settings that needs to be or should i use any specific Business Object for this scenario.
Please throw some light upon this.
Thanks,
Prashanth

Hi Prashant,
Best way to find out which event is getting triggered with this report is by using Event Trace, Follow the below steps.
(1)- Go to Tcode SWELS, (SWITCH ON THE TRACE).
(2)- Now run this Report .
(3)- Go to Tcode SWELS again.(SWITCH OFF THE TRACE).
(4)- Go to Tcode SWEL, Execute it, You'll find the Event name and Business object name that got trigerred.
Note: If you don't see any event getting trigerred in SWEL, this means that with this report no event is executing.
The other way around could be to use a BADI or User-exit in that you have to externally trigger the event by using function module.
'SAP_WAPI_CREATE_EVENT'
Note: If events are not getting trigerred through transactions, Then you can use this function module to trigger workflow from outside, So use this function module in any badi or exit or enhancement spot that suits your requirement.
Thanks.

Events not triggered

Hi,
We have created a custom workflow for notifcation purpose when shopping cart is fully approved. We are working on SRM 5.0 and classic scenario is implemented.
To start this workflow we used event "FinishedApproval" of BO BUS2121. But this event is not triggered in system when shopping cart is fully approved.
No events are registered in event trace too.
when event is triggered using SWUE, workflow is started as desired.
We are using N-step SC approval workflow and it is working perfectly fine. Notification workflow is desired to start after completion of approval workflow.
Kindly provide some solution for this issue.
Regards,
Brajvir

Hi Maksim,
I meant none of the click events in the DOM are triggered while loading sap.m library as dependency via Component.js but works fine while the sap.m library is loaded via bootstrap.
I supposedly think the events are bounded before the DOM is loaded but I m bit surprised with the behavior since there nothing changed in the structure apart from sap.m library loading from different location.
Thanks,
Ajain

MouseListener event not triggering sometimes

              lineTable = atmBean1.getReturnTable();
              //remove the other columns
              lineTable.removeColumn(lineTable.getColumnModel().getColumn(21));
              lineTable.removeColumn(lineTable.getColumnModel().getColumn(20));
              lineTable.addMouseListener(new MouseAdapter() {
                  public void mouseClicked(MouseEvent e) {
                      setChargesPanel();
    public void setChargesPanel()
            lblConsdData.setText(mainPanel.formatDollar(Double.parseDouble(String.valueOf(atmBean1.tm.getValueAt(lineTable.getSelectedRow(),11)))));
            lblAllowedData.setText(mainPanel.formatDollar(Double.parseDouble(String.valueOf(atmBean1.tm.getValueAt(lineTable.getSelectedRow(),13)))));
            lineChargesPanel.validate();
            lineChargesPanel.repaint();
    }when the JTable is set with some data, i have another GUI which has some labels , when the row is selected the corresponding values are taken from the original table model and is displayes in the JLabels.
Sometimes, when the mouse is clicked it is not triggering this

is it just because its Swing GUI.. the JTable rows sometimes get selected but the event is not triggered when the mouse is clicked, maybe the API is not good ???????.

Events not triggering in alv list, point will be given

Hi friends,
      I am using reuse_alv_list_display fm to display data.
and i am using reuse_alv_events_get fm to trigger events.
but, top_of_page, event is not triggering,
more precisely , the subroutine is not getting recognized by system. how to rectify this.
Check my code.
*& Report ZSEN_SERVICETAX_GTA
REPORT zsen_servicetax_gta NO STANDARD PAGE HEADING LINE-COUNT 100.
*****************************************TABLES USED**********************************************************************
*TABLES: BSIS, "Accounting: Secondary Index for G/L Accounts
       BSAS, "Accounting: Secondary Index for G/L Accounts (Cleared Items)
       LFA1. "Vendor Master (General Section).
*****************************************WORK AREA / INTERNAL TABLE DECLARATION******************************************
TYPE-POOLS: slis.
TYPES: BEGIN OF ty_main,
       hkont    TYPE bsis-hkont,
       belnr    TYPE bsis-belnr,
       budat    TYPE bsis-budat,
       blart    TYPE bsis-blart,
       dmbtr    TYPE bsis-dmbtr,
       xblnr    TYPE bsis-xblnr,
       shkzg    TYPE bsis-shkzg,
       augbl TYPE bsis-augbl,
       kz_dmbtr TYPE bsis-dmbtr,
       kz_xblnr TYPE bsis-xblnr,
       kz_blart TYPE bsis-blart,
       kz_belnr TYPE bsis-belnr,
       kz_budat TYPE bsis-budat,
       kz_zuonr TYPE bsis-zuonr,
       name1    TYPE lfa1-name1,
       slno     TYPE i,
       END OF ty_main,
       BEGIN OF ty_bsas,
       belnr TYPE bsas-hkont,
       budat TYPE bsas-budat,
       xblnr TYPE bsas-xblnr,
       augbl TYPE bsas-augbl,
       dmbtr TYPE bsas-dmbtr,
       blart TYPE bsas-blart,
       zuonr TYPE bsas-zuonr,
       END OF ty_bsas.
DATA: it_main TYPE TABLE OF ty_main,
      wa_main LIKE LINE OF it_main,
      it_bsas TYPE TABLE OF ty_bsas,
      wa_bsas LIKE LINE OF it_bsas.
DATA: it_sort       TYPE slis_t_sortinfo_alv,
      fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_layout     TYPE slis_layout_alv,
      gt_events     TYPE slis_t_event,
      int_fcat      TYPE slis_fieldcat_alv,
      it_header     TYPE slis_t_listheader,
      wa_header     TYPE slis_listheader.
************************************************work variables***********************************************************************
DATA: ven_name   TYPE lfa1-name1,
      post_date TYPE bsis-budat,
      t_tabix    TYPE sy-tabix,
      i_prg      LIKE sy-repid.
***********************************************selection screen***********************************************************************
SELECTION-SCREEN: BEGIN OF BLOCK gtn WITH FRAME TITLE text-001 .
SELECT-OPTIONS: date FOR post_date OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK gtn.
************************************************data selection**************************************************************************
START-OF-SELECTION.
PERFORM data_retreval.
PERFORM build_catalog.
PERFORM layout.
PERFORM build_events.
PERFORM sortinfo.
IF it_main[] IS NOT INITIAL.
    PERFORM display_alv.
ELSE.
    MESSAGE 'No Records Matching For This Selection' TYPE 'E'.
ENDIF.
******************************data display*********************************************************************************************
*&      Form data_retreval
      text
--> p1        text
<-- p2        text
FORM data_retreval .
CLEAR:it_main[], wa_main, fieldcatalog[].
***********************************************selecting data from bsis table for the given date range**********************************
SELECT ahkont abelnr abudat ablart admbtr axblnr a~shkzg
         b~augbl
         INTO CORRESPONDING FIELDS OF TABLE it_main
         FROM bsis AS a LEFT OUTER JOIN bsas AS b
         ON abelnr = bbelnr
         WHERE a~budat IN date
         AND   a~blart = 'KR'
         AND   a~shkzg = 'S'
         AND   a~hkont = '0002200530'.
***********************************************selecting data from bsas table using bsis-belnr*******************************************
LOOP AT it_main INTO wa_main.
    SELECT belnr budat dmbtr xblnr zuonr augbl blart
           INTO CORRESPONDING FIELDS OF wa_bsas
           FROM bsas
           WHERE belnr = wa_main-augbl
           AND   blart = 'KZ'.
    ENDSELECT.
    APPEND wa_bsas TO it_bsas.
ENDLOOP.
********************************************combining two tables data******************************************************************
LOOP AT it_main INTO wa_main.
    t_tabix = sy-tabix.
       wa_main-slno     = t_tabix.
    READ TABLE it_bsas INTO wa_bsas WITH KEY augbl = wa_main-augbl.
    IF sy-subrc = 0.
      SELECT SINGLE name1
             FROM lfa1
             INTO ven_name
             WHERE lifnr = wa_bsas-zuonr.
      wa_main-kz_dmbtr = wa_bsas-dmbtr.
      wa_main-kz_belnr = wa_bsas-belnr.
      wa_main-kz_blart = wa_bsas-blart.
      wa_main-kz_budat = wa_bsas-budat.
      wa_main-kz_xblnr = wa_bsas-xblnr.
      wa_main-kz_zuonr = wa_bsas-zuonr.
      wa_main-name1    = ven_name.
    ENDIF.
    MODIFY it_main FROM wa_main INDEX t_tabix TRANSPORTING kz_dmbtr kz_belnr kz_budat kz_blart kz_xblnr kz_zuonr name1 .
ENDLOOP.
SORT it_main BY kz_blart kz_zuonr.
LOOP AT it_main INTO wa_main.
    wa_main-slno = sy-tabix.
    MODIFY it_main FROM wa_main INDEX sy-tabix TRANSPORTING slno.
ENDLOOP.
ENDFORM.                    " data_retreval
*&      Form build_catalog
      text
--> p1        text
<-- p2        text
FORM build_catalog .
DATA: col_pos TYPE i.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'SLNO'.
fieldcatalog-seltext_m = 'Serial No'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'KZ_ZUONR'.
fieldcatalog-seltext_m = 'Vendor Num'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'NAME1'.
fieldcatalog-seltext_m = 'Vendor Name'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'BLART'.
fieldcatalog-seltext_m = 'BillDoc.Type'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'BELNR'.
fieldcatalog-seltext_m = 'BillDoc.Num.'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'BUDAT'.
fieldcatalog-seltext_m = 'BillPosting Date'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'XBLNR'.
fieldcatalog-seltext_m = 'BillReference Num'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'DMBTR'.
fieldcatalog-seltext_m = 'Bill Amount'.
fieldcatalog-col_pos   = col_pos.
fieldcatalog-do_sum    = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'KZ_BLART'.
fieldcatalog-seltext_m = 'Pay_Doc.type'.
fieldcatalog-col_pos   = col_pos.
   fieldcatalog-do_sum    = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'KZ_BELNR'.
fieldcatalog-seltext_m = 'Pay_Document No'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'KZ_DMBTR'.
fieldcatalog-seltext_m = 'Payment Amount'.
fieldcatalog-col_pos   = col_pos.
fieldcatalog-do_sum    = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'KZ_XBLNR'.
fieldcatalog-seltext_m = 'Pay_Reference Num'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'KZ_BUDAT'.
fieldcatalog-seltext_m = 'Pay_Posting Date'.
fieldcatalog-col_pos   = col_pos.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
col_pos = col_pos + 1.
fieldcatalog-fieldname = 'AUGBL'.
fieldcatalog-seltext_m = 'Clr.Doc.Num'.
fieldcatalog-col_pos   = col_pos.
   fieldcatalog-row_pos   = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR: fieldcatalog.
ENDFORM.                    " build_catalog
*&      Form sortinfo
      text
--> p1        text
<-- p2        text
FORM sortinfo .
DATA: is_sort TYPE slis_sortinfo_alv.
CLEAR:is_sort.
is_sort-spos       = 2.
is_sort-fieldname = 'KZ_ZUONR'.
is_sort-up         = 'X'.
APPEND is_sort TO it_sort.
CLEAR: is_sort.
is_sort-spos       = 1.
is_sort-fieldname = 'KZ_BLART'.
is_sort-up         = 'X'.
is_sort-subtot     = 'X'.
APPEND is_sort TO it_sort.
ENDFORM.                    " sortinfo
*&      Form layout
      text
--> p1        text
<-- p2        text
FORM layout .
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-zebra             = 'X'.
*gd_layout-totals_text       = 'Grand Total'.
*gd_layout-subtotals_text    = 'BillBooked Not Paid'.
ENDFORM.                    " layout
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
i_prg = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = 'I_PRG'
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = 'TOP-OF-PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = 'TOP-OF-PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     is_layout                         = gd_layout
     it_fieldcat                       = fieldcatalog[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
     it_sort                           = it_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
     it_events                         = gt_events
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_main
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_alv
*&      Form build_events
      text
--> p1        text
<-- p2        text
FORM build_events .
DATA: is_event TYPE slis_alv_event.
break-point.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = gt_events[]
EXCEPTIONS
    LIST_TYPE_WRONG       = 1
    OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page INTO is_event.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO is_event-form.
   MODIFY gt_events from is_event TRANSPORTING form WHERE name = slis_ev_top_of_page.
ENDIF.
ENDFORM.                    " build_events
*&      Form top_of_page
      text
--> p1        text
<-- p2        text
form top_of_page .
    BREAK-POINT.
    SKIP 3.
    WRITE:/20 'BILLING DETAILS', 40 'PAYMENT DETAILS'.
endform.                    " top_of_page
Regards.
s.senthil kumar

hi i modified ur program , check this and let me know
REPORT zsen_servicetax_gta NO STANDARD PAGE HEADING LINE-COUNT 100.
*****************************************TABLES USED**********************************************************************
TABLES: BSIS, "Accounting: Secondary Index for G/L Accounts
BSAS, "Accounting: Secondary Index for G/L Accounts (Cleared Items)
LFA1. "Vendor Master (General Section).
*****************************************WORK AREA / INTERNAL TABLE DECLARATION******************************************
TYPE-POOLS: slis.
TYPES: BEGIN OF ty_main,
hkont TYPE bsis-hkont,
belnr TYPE bsis-belnr,
budat TYPE bsis-budat,
blart TYPE bsis-blart,
dmbtr TYPE bsis-dmbtr,
xblnr TYPE bsis-xblnr,
shkzg TYPE bsis-shkzg,
augbl TYPE bsis-augbl,
kz_dmbtr TYPE bsis-dmbtr,
kz_xblnr TYPE bsis-xblnr,
kz_blart TYPE bsis-blart,
kz_belnr TYPE bsis-belnr,
kz_budat TYPE bsis-budat,
kz_zuonr TYPE bsis-zuonr,
name1 TYPE lfa1-name1,
slno TYPE i,
END OF ty_main,
BEGIN OF ty_bsas,
belnr TYPE bsas-hkont,
budat TYPE bsas-budat,
xblnr TYPE bsas-xblnr,
augbl TYPE bsas-augbl,
dmbtr TYPE bsas-dmbtr,
blart TYPE bsas-blart,
zuonr TYPE bsas-zuonr,
END OF ty_bsas.
DATA: it_main TYPE TABLE OF ty_main,
wa_main LIKE LINE OF it_main,
it_bsas TYPE TABLE OF ty_bsas,
wa_bsas LIKE LINE OF it_bsas.
DATA: it_sort TYPE slis_t_sortinfo_alv,
IT_fieldcatalog TYPE slis_t_fieldcat_alv ,
WA_fieldcatalog TYPE slis_fieldcat_alv,
gd_layout TYPE slis_layout_alv,
gt_events TYPE slis_t_event,
WA_EVENTS TYPE SLIS_T_EVENT,
int_fcat TYPE slis_fieldcat_alv,
it_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader.
************************************************work variables***********************************************************************
DATA: ven_name TYPE lfa1-name1,
post_date TYPE bsis-budat,
t_tabix TYPE sy-tabix,
i_prg LIKE sy-repid.
***********************************************selection screen***********************************************************************
SELECTION-SCREEN: BEGIN OF BLOCK gtn WITH FRAME TITLE text-001 .
SELECT-OPTIONS: date FOR BSIS-BUDAT .
SELECTION-SCREEN: END OF BLOCK gtn.
************************************************data selection**************************************************************************
START-OF-SELECTION.
PERFORM data_retreval.
PERFORM build_catalog.
PERFORM layout.
PERFORM build_events.
PERFORM sortinfo.
IF it_main[] IS NOT INITIAL.
PERFORM display_alv.
ELSE.
MESSAGE 'No Records Matching For This Selection' TYPE 'E'.
ENDIF.
******************************data display*********************************************************************************************
**& Form data_retreval
*text
*--> p1 text
*<-- p2 text
FORM data_retreval .
CLEAR:it_main[], wa_main.
***********************************************selecting data from bsis table for the given date range**********************************
SELECT ahkont abelnr abudat ablart admbtr axblnr a~shkzg
b~augbl
INTO CORRESPONDING FIELDS OF TABLE it_main
FROM bsis AS a LEFT OUTER JOIN bsas AS b
ON abelnr = bbelnr
WHERE a~budat IN date.
*AND a~blart = 'KR'
*AND a~shkzg = 'S'
*AND a~hkont = '0002200530'.
***********************************************selecting data from bsas table using bsis-belnr*******************************************
LOOP AT it_main INTO wa_main.
SELECT belnr budat dmbtr xblnr zuonr augbl blart
INTO CORRESPONDING FIELDS OF wa_bsas
FROM bsas
WHERE belnr = wa_main-augbl
AND blart = 'KZ'.
ENDSELECT.
APPEND wa_bsas TO it_bsas.
ENDLOOP.
********************************************combining two tables data******************************************************************
LOOP AT it_main INTO wa_main.
t_tabix = sy-tabix.
wa_main-slno = t_tabix.
READ TABLE it_bsas INTO wa_bsas WITH KEY augbl = wa_main-augbl.
IF sy-subrc = 0.
SELECT SINGLE name1
FROM lfa1
INTO ven_name
WHERE lifnr = wa_bsas-zuonr.
wa_main-kz_dmbtr = wa_bsas-dmbtr.
wa_main-kz_belnr = wa_bsas-belnr.
wa_main-kz_blart = wa_bsas-blart.
wa_main-kz_budat = wa_bsas-budat.
wa_main-kz_xblnr = wa_bsas-xblnr.
wa_main-kz_zuonr = wa_bsas-zuonr.
wa_main-name1 = ven_name.
ENDIF.
MODIFY it_main FROM wa_main INDEX t_tabix TRANSPORTING kz_dmbtr kz_belnr kz_budat kz_blart kz_xblnr kz_zuonr name1 .
ENDLOOP.
SORT it_main BY kz_blart kz_zuonr.
LOOP AT it_main INTO wa_main.
wa_main-slno = sy-tabix.
MODIFY it_main FROM wa_main INDEX sy-tabix TRANSPORTING slno.
ENDLOOP.
ENDFORM. " data_retreval
**& Form build_catalog
*text
*--> p1 text
*<-- p2 text
FORM build_catalog .
DATA: col_pos TYPE i.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'SLNO'.
WA_fieldcatalog-seltext_m = 'Serial No'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'KZ_ZUONR'.
WA_fieldcatalog-seltext_m = 'Vendor Num'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'NAME1'.
WA_fieldcatalog-seltext_m = 'Vendor Name'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'BLART'.
WA_fieldcatalog-seltext_m = 'BillDoc.Type'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'BELNR'.
WA_fieldcatalog-seltext_m = 'BillDoc.Num.'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'BUDAT'.
WA_fieldcatalog-seltext_m = 'BillPosting Date'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'XBLNR'.
WA_fieldcatalog-seltext_m = 'BillReference Num'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'DMBTR'.
WA_fieldcatalog-seltext_m = 'Bill Amount'.
WA_fieldcatalog-col_pos = col_pos.
WA_fieldcatalog-do_sum = 'X'.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'KZ_BLART'.
WA_fieldcatalog-seltext_m = 'Pay_Doc.type'.
WA_fieldcatalog-col_pos = col_pos.
WA_fieldcatalog-do_sum = 'X'.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'KZ_BELNR'.
WA_fieldcatalog-seltext_m = 'Pay_Document No'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'KZ_DMBTR'.
WA_fieldcatalog-seltext_m = 'Payment Amount'.
WA_fieldcatalog-col_pos = col_pos.
WA_fieldcatalog-do_sum = 'X'.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'KZ_XBLNR'.
WA_fieldcatalog-seltext_m = 'Pay_Reference Num'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'KZ_BUDAT'.
WA_fieldcatalog-seltext_m = 'Pay_Posting Date'.
WA_fieldcatalog-col_pos = col_pos.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
col_pos = col_pos + 1.
WA_fieldcatalog-fieldname = 'AUGBL'.
WA_fieldcatalog-seltext_m = 'Clr.Doc.Num'.
WA_fieldcatalog-col_pos = col_pos.
WA_fieldcatalog-row_pos = 2.
APPEND WA_fieldcatalog TO IT_fieldcatalog.
CLEAR: WA_fieldcatalog.
ENDFORM. " build_catalog
**& Form sortinfo
*text
*--> p1 text
*<-- p2 text
FORM sortinfo .
DATA: is_sort TYPE slis_sortinfo_alv.
CLEAR:is_sort.
is_sort-spos = 2.
is_sort-fieldname = 'KZ_ZUONR'.
is_sort-up = 'X'.
APPEND is_sort TO it_sort.
CLEAR: is_sort.
is_sort-spos = 1.
is_sort-fieldname = 'KZ_BLART'.
is_sort-up = 'X'.
is_sort-subtot = 'X'.
APPEND is_sort TO it_sort.
ENDFORM. " sortinfo
**& Form layout
*text
*--> p1 text
*<-- p2 text
FORM layout .
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-zebra = 'X'.
*gd_layout-totals_text = 'Grand Total'.
*gd_layout-subtotals_text = 'BillBooked Not Paid'.
ENDFORM. " layout
**& Form display_alv
*text
*--> p1 text
*<-- p2 text
FORM display_alv .
i_prg = sy-repid.
DATA:it_events TYPE slis_t_event,
       wa_events TYPE slis_alv_event.
WA_events-name = 'TOP_OF_PAGE'.
WA_events-form = 'TOP_OF_PAGE'.
APPEND wa_events TO it_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
*I_INTERFACE_CHECK = ' '
*I_BYPASSING_BUFFER = ' '
*I_BUFFER_ACTIVE = ' '
i_callback_program = 'I_PRG'
*I_CALLBACK_PF_STATUS_SET = ' '
*I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
*I_CALLBACK_HTML_TOP_OF_PAGE = 'TOP-OF-PAGE'
*I_CALLBACK_HTML_END_OF_LIST = ' '
*I_STRUCTURE_NAME =
*I_BACKGROUND_ID = ' '
*I_GRID_TITLE =
*I_GRID_SETTINGS =
is_layout = gd_layout
it_fieldcat = IT_fieldcatalog[]
*IT_EXCLUDING =
*IT_SPECIAL_GROUPS =
*it_sort = it_sort
*IT_FILTER =
*IS_SEL_HIDE =
*I_DEFAULT = 'X'
*I_SAVE = ' '
*IS_VARIANT =
it_events = It_events.
*IT_EVENT_EXIT =
*IS_PRINT =
*IS_REPREP_ID =
*I_SCREEN_START_COLUMN = 0
*I_SCREEN_START_LINE = 0
*I_SCREEN_END_COLUMN = 0
*I_SCREEN_END_LINE = 0
*I_HTML_HEIGHT_TOP = 0
*I_HTML_HEIGHT_END = 0
*IT_ALV_GRAPHICS =
*IT_HYPERLINK =
*IT_ADD_FIELDCAT =
*IT_EXCEPT_QINFO =
*IR_SALV_FULLSCREEN_ADAPTER =
*IMPORTING
*E_EXIT_CAUSED_BY_CALLER =
*ES_EXIT_CAUSED_BY_USER =
*TABLES
*t_outtab = it_main
*EXCEPTIONS
*PROGRAM_ERROR = 1
*OTHERS = 2
*IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
ENDFORM. " display_alv
**& Form build_events
*text
*--> p1 text
*<-- p2 text
FORM build_events .
DATA: is_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = gt_events[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page INTO is_event.
IF sy-subrc = 0.
MOVE 'TOP_OF_PAGE' TO is_event-form.
MODIFY gt_events from is_event TRANSPORTING form WHERE name = slis_ev_top_of_page.
ENDIF.
ENDFORM. " build_events
**& Form top_of_page
*text
*--> p1 text
*<-- p2 text
form top_of_page .
SKIP 3.
WRITE:/20 'BILLING DETAILS', 40 'PAYMENT DETAILS'.
ENDFORM.
reward points if useful,
venkat.

OnEnter event not triggering in standard WD

HI Experts,
I am creating a view enhancement in standard WD component. I have craeted an action for Onenter event for an input field.
When i press enter after selecting that field, the action is not triggered and hence my event handler method is not executing.
Please let me know the reason why it is not happening and how can i fix it.
Thanks & Regards,
Sushant Singh

I dont think if you change the properties of UI elements which are standard will work.
If already OnEnter is created for input field then you can create Post-Exit , Pre-Exit methods.
Alternative would be to make the Standard Input field as invisible and create you own input field with same properties as of standard one.

Workflow Event not triggering

Similar Messages

Maybe you are looking for