Workflow Export 5.1 Audio to WAV

Hi,
I want to improve my audio workflow in Premiere CS6.
My Task:
I have to master feature length movies in premiere and have to export the final 5.1 audio:
1. as 5.1 48KHz 24Bit RF64 multi channel broadcast WAV
2. as set of discrete audio channels L R C Lfe Ls Rs
What doesn't works for me:
1. Export multichannel WAV: because the multichannel file would be larger 4GB Premiere just gives an error on export.
2. Send to Audition: because the multichannel file would be larger 4GB Premiere just gives an error on export.
3. Export Quicktime - audio only: this always results in corruped files with random audio peaks. (looks like a memory leak in the export)
My Workaround:
1. Export 5.1 audio to AVI - audio only - uncompressed 5.1 48KHz 24Bit
2. Import the exported AVI into Audition
4. Resample from 32bit float back to 24bit integer
3. Save as 48KHz 24Bit RF64 multi channel broadcast WAV
4. Split channels to mono files
5. Save all 6 mono channels
My question:
Is there a way to export the audio WAV directly from Premiere?
thanks
nw42

I do not believe that PrPro can Export to Multi-channel (above 2-channel) WAV.
The only two choices that I know of are:
Export to DD 5.1 SS AC3 w/ Minnetonka Audio SurCode Encoder plug-in (optional purchase)
Per your workaround, Export as a muli-channel WMA, then break out each channel to a discrete mono file. This is what I do, to later Encode to DTS with the SurCode DTS Encoder (stand-alone, not plug-in)
Maybe others will have other ideas for you.
Good luck,
Hunt

Similar Messages

Exporting project as audio file (wav)?

This may sound like a stupid question but i'm new to logic. I'm trying to export the project as an audio wav file to post on the net but am a little confused how its done. The project contains apple loops - can these be exported with the rest of the project?
Thanks

Look up "Bounce"...
This will create a stereo mix of your song, in any format you choose, be it .wav, AIFF, AAC,, mp3, etc...

Exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?

exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?
Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

Hi thanks Dave for responding - yes that could work as a 'workaround' - I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
thanks again for your help, if you or anyone has any other solution pls let me know
Best
Alex

Exporting 5.1 audio from Audition to single, multichannel audio file

I'm having problems exporting 5.1 audio. I need to be able to import a 5.1 (or 8 channel file, if left total and right total are included), edit one of the channels individually, and export the session to a single .WAV file containing 6 (or 8) separate channels.
So far, I've been able to split the original multichannel file to 6 mono files, and put them on their own tracks. But every time I try to export, I either end up with 6 channels (but only two with audio on them), or 6 completely blank channels. I've tried every combination of Mixdown Options and Master track routing I can think of, but to no avail.
I'm using Audition 7.0.0.118. Please help. If you respond, please be as specific as possible, since I'm a n00b at this. Thanks.

Are you opening the mono files into a 5.1 Multitrack session and using the surround panner to send them to the appropriate tracks?
What do you need to do to the one track that needs editing separately? You might be better off opening the audio as a multichannel file in the Waveform Edit view and do any processing on the one track there. You will then be able to save out to the same multichannel format as the original.

How do you export a specific audio segment in timeline

I recently tried to reduce noise from a specific clip by exporting a short segment of my audio to create a file I can use with audacity. I ended up exporting the entire audio segment of the project.
How can I select a specific clip segment that is only a part of the video and export it to create a file I can then edit using audacity?
I would like to avoid exporting the entire event clip from which that segment came. I have done considerable editing of the original video footage in the event and trying to figure out where that segment came from would require a considerable amount of time.
Any help or guidance is appreciated.

in fcpx 10.0.6, if you have a range selection, the export will be only that segment.
Hold down the R key and click-drag a range selection, or use the playhead to mark In ('i' key) and Out ('o' key) points.
Select Share > Export File
In the dialog, select Settings
For Format: Audio Only
Audio File Format: I recommend AIFF, CAF or WAVE (depending on your target audio editor.) [AAC, AC3, and MP3 are "delivery" formats, not editing formats.]
then hit Next and save it.
I recommend setting a marker at the in point so you can easily line up the edited audio when you re-import it.

How to export comps as audio files that start at beginning of song?

Hi all
I'm a failry casual Logic user, looking for some insights from you experts out there!
Right now I'm helping out on an album project which involves me laying down various parts in a different location to the main project. Basically I'm getting rough mixes of the songs which I'm importing into my own Logic 8 project as single stereo files. Then I'm recording my various bits so that I can later send back individual wavs of each track I've recorded.
I've recorded various takes and made a few comps that I want to use for my file export. However, I haven't always started recording at the very beginning of the song, hence my audio regions don't start at the same point. I want to give the producer files that can be pulled into the main project with the exact same starting point.
I've tried poking around in the menus and the user guide to figure out how to do this, but without much success. I've tried "flatten and merge" on my comps, and have then tried drawing some "blank" regions to fill in the space back to the song starting point. I thought I could then glue them together and export as one audio file, but it's not working.
Before I get myself too tied up in knots, can anyone recommend a "right" way to do this?
Thanks a lot!

Thanks! I'll try that third option and see if it works for us.
I'd still like to solve this via option 1 anyway, as it could be useful in other applications (ie when collaborating with systems that don't support the timestamp feature).
The problem is that if I use the pencil tool to draw an empty region, it won't let me glue it to the existing recorded region. I get the error "Folders and Regions or Aliases cannot be merged."
Also, if I double-click the new region it opens in the piano roll rather than the sample editor, which seems bizarre. Surely you can't combine MIDI and audio regions on the same track?? This could be a clue as to why it won't let me glue these regions together though.
Note that in the file I'm currently trying this with, I've flattened and merged my takes, having chosen the one I want to keep. So, I no longer have the take folders visible (and actually, I don't know how I'd get them back if I wanted to, but I guess that's a different question entirely). My point being that Folders aren't in use here, despite what the error message says.

AAF won't export video, only audio

PPro CC 2014.2 release   8.2.0 (65) Build
iMac 27" Mid 2011; 3.4ghz i7; 16gb 1333 Mhz DDR3; AMD Radeon HD6970M 1024mb; OSX 10.9.5
I need to export AAFs of projects for Avid finishing. Tried exporting with embedded audio, separate audio, WAV, AIFF, trimmed and complete audio files but in no instance has the video exported.
I get no error message.
I have tried using multiple projects all with the same results-no video goes with the export. I can do work arounds but I need to have a simple and direct way to export from PP to Avid. We have dozens of users in our facility who need this ability.
I've looked through the discussion boards here and elsewhere and can't find an answer to this one.
Is this a known bug? I haven't attempted this in earlier builds, so I'm unsure whether this has ever functioned.
ANy help is appreciated.

     There are 2 main types of video in the project I'm editing: h.264 (MOV) from a Canon T3i DSLR, and MPEG-2 from an HDV Camcorder. None of the videos will play video in the timeline monitor, but the playhead moves and the audio plays (the video just shows a media offline graphic, although all the media is connected). All videos will play in the source monitor regardless of codec. This leads me to believe that codec issues are not the problem.
Graphics Card: NVIDIA Geforce GT 620
Graphics Driver Version: 9.18.13.3788
     I have updated to the latest nvidia driver in the past week. There was another thread similar to my problem (http://forums.creativecow.net/thread/205/874787) where the guy figured out it was because he had 2 graphics cards, and that his timeline monitor was running off the wrong one. However, his description of what he did to fix it was not very clear, or at least not for my amount of knowledge.
There was another thread where someone said to downgrade to an older driver, and that didn't work either. here's a
screenshot of what it looks like when I play a video in the timeline:

Je n'arrive pas à exporter plusieurs pistes audio sur un même fichier depuis premiere pro CC2014

je n'arrive pas à exporter plusieurs pistes audio sur un même fichier depuis premiere pro CC2014. Je souhaite le faire avec un codec plug in Prores (mais là aussi rien de prévu)
merci pour votre aide

Bonjour,
Je ne suis pas du tout spécialiste mais il n'y a aucun problème à exporte plusieurs pistes audio à partir de Première. -Exportation Media> Format : AIFF ou Audio ACC après on peut utiliser Audition si on veut convertir dans un format compressé . En ce qui concerne l'utilisation du codec plug in Prores, as-tu cherché sur le net par ex sur
Exporter converter Plugin for Adobe Premiere and After Effects for Export / Conversion to Apple Prores & HEVC H265 on Wi…/ ,
Miraizon DNxHD and ProRes Codecs Overview ou autres.
Je n'ai pas regardé mais comme tout plugin commercial, faut l'acheter et l'installer avant de pouvoir l'utiliser.

Export PDF with Audio

Maybe I'm not able to do it, but I have a feeling it's just because I have NO clue as to how to go about it.
I've mae a pdf file using Acrobat XI . I've embedded an audio file. The pdf file works just fine on my PC but when I want to export it the audio doesn't show up. Is this function possible ? If so , how do I go about it ? I'm a NEWB !!
I thank you in advance for any help !
Cheers!

I want to place PDF file or link to it on my FB page, when I do, the embedded audio file doesn't go with it. So I guess I'm not saving it in the right format ? I guess this would be the same if I embedded a video file as well?
If this can be done , what is the step by step instruction ? I can't see where I can save it in a different format ?
Thanks again

Export Quicktime with Audio - timings to advance slides -does not work

Mac OS 10.6.1
iMac 27" 4 GB 1067 MHZ
Keynote 09 - 5.03
I opened a .ppt
I added an windows media file after getting it into GarageBand - so a GarageBand file actually
I timed the slides - this does not work either as a side remark - you can not just enter seconds there - they disappear - you need to use the arrows
If I test the slideshow, it runs nice in Keynote.
If I export it to Quicktime, the sound works, the slides do not advance.
(I think I had it once working before I moved my files to my new Mac)
Help please
nico

I'm just posting this as a general discovery....
I too have had many many frustrations with creating a slide show with audio clips linked to individual slides and a soundtrack music background. Of course this records fine and plays back fine in KN. The problem lies in any form of sharing/exporting. The audio either disappears or the timing goes nutty.
What I discovered was....During a manual recording in which I advance the slides and the builds within the slides, the tap of the space bar directly correlates to when the audio would stop in the exported version. ie. Slide one, audio set to start automatically after transistion, text has no builds, Slide 2, audio set to start automatically, text builds with each bullet. In the exported version the second I hit the space bar to create the first build during the recording, is where the audio is cut off in the exported version.
Therefore, if I go through each and every slide and set the timing for each and every build, transition, etc. , then record the slideshow so that I never have to hit the space bar to create builds (transitions to next slide seems to be fine) my exported recording seems to play back without problems. This is very tedious but seems to work (so far).
I hope I have explained my findings clearly. I also hope that this is somewhat helpful to the rest of the world

Logic is being difficult with exporting track as audio.

I have midi tracks, and I want to export them as audio tracks so that I can edit them as audio files. When I export the midi track as an audio, it doesn't start at the beginning of the project. it is starting somewhere else on certain tracks. Logic is starting to tick me off. Or maybe it is just user error ticking me off...

well, you can drag the beginning marker to the left into the negative numbers. Thus, making the project start in the negatives. The reason I do that is because I am running a click track. The first measure of clicks are quarter clicks, the second measure is 8th clicks. Then the music begins at the 3rd measure. In order to get the measure numbers in Logic to be the same as the measure numbers in the sheet music, I have to start the click at measure -1. This way, the music starts on measure 1.

Can't export MIDI as Audio file. Any idea what I should have done?

Hi all,
wonder if anyone can help me out. I'm a "Logic"-newbie.
I recorded 10 "external MIDI" tracks(strings) from my Roland JV 1080 synth module into Logic Pro 9 and now I want to export the MIDI file as Audio but when I go to: File - Export - Track As Audio File, the "Track As Audio File" is gray/ not enabled !! The option-"Export All Tracks As Audio Files " is enabled, but when I try it, it doesn export the MIDI tracks with all the Roland JV 1080 data.It only exports any other recorded "soft instruments"tracks or Audio tracks I've uploaded. Keep in mind, the 10 Midi recorded tracks of strings (JV 1080) are using the same program name/patch, and all 10 tracks are on a single channel. In the Inspector window, it doesn't show the "Bounce" option either. When I started recording the strings from this patch, I used the "new track with duplicate settings"-button,so I could have the same sounding string patch available right away. My Roland JV 1080 synth, is connected to the Midi interface only. Should I also have Audio cables connected from JV 1080's Mix Out to the Audio interface (Apogee-Duet) in order to record directly as Audio?
Thanks for your time guys!

Thank you as well! Since, you have similar equipment like mine- (Apogee/ Emagic), how do you suggest I connect my devices properly. I got an external 12-channel "Mackie"1202-VLZ Mixer, which has my Roland JV 1080 box and my Kurzweil PC2X controller kyes connected to.These two are also, connected MIDI In and Out -to my Emagic Unitor 8 MKII (Audio Interface). I'm a little confused about the connecting of my Apogee Duet, since it has just 2 OUT's- L and R. What's the best rigging here, so I can hear the Audio back from the JV 1080 and the Kurzweil?
( P.S. The Apogee Duet's OUT's (L& R) are plugged into the Mackie'sStereo Aux Returns (L&R). The monitors are connected to the Main Outs.)
I appreciate your suggestions.

Premiere Pro dropped audio after export, AME no audio

Similar problem in both premiere & AME - clips are exporting with video but no audio.
When queueing up jobs in AME, they'll finish with no Audio & now even exporting directly from the timeline in Premiere Pro CC 2014.2 (just updated 2014-12-14) our clips still have no audio.
All clips have conformed on the timeline before beginning export.
This is happening despite trying these various solutions... re-installing Premiere, starting a new project, choosing a new Scratch Disk with 3 TB of available hard drive space... also our operating system is a 2014 3.5 GHz i7 32GB RAM iMac, running Mavericks with a 256 GB Flash Hard Drive, so RAM or HD speed should not be an issue?
Any advice or a solution would be greatly appreciated. We export dozens of jobs a day and cannot find a reason why this Adobe Premiere Pro & AME Software is not working correctly & giving us dropped audio upon export - very frustrating, thanks for the help...

I have 2 macs, screenshot with identical export setting was from 2nd mac. if you can repro now here is a 2014.2 screenshot & same export settings on the 2014.2 mac; issue occurs on both computers thanks - also this timeline, before export I had audio on all tracks. Here is a screenshot of the timeline post export; all of the audio is gone? It was there at time of export

7.1.1 "Export Track As Audio"

This feature, which worked OK in 7.1 now omits controller from the bounce, so all volume, mod wheel, etc. info is not written to the audio bounce.
Any help out there?

wow, I haven't tried this yet. Does it happen when exporting regions as audio also? It sounds like something that Apple should be made aware of immediately. It's a really good feature, especially for people like me who sometimes have to convert projects into Pro Tools sessions.

Cannot Export MPEG2 with Audio

Hi Guys
I have a bizare problem. I've been trying to export a short 2 min movie to MPEG 2 for YouTube but it won't export the audio with video and exports the audio as a separate file (yes, the export audio box is checked)! Yet it will export with audio to AVI. What could I have switched off or need to switch on?
Can anyone advise please? The movie was captured using the DV PAL Codec (720x576). The export settings are:
Audio Format MPEG
Basic Audio
Codec: mainConcept MPEG Audio
Audio layer: Mpeg1 Layer II Audio
Audio mode :Stereo
Sample size: 16bit
Frequency: 48Khz
Bit rate: 224
Psyc mode: Model 2
Demphasis: No emphasis
Enable CRC - Set Original bit: all off
Video Format MPEG2
Pre-set PAL DV High Quality
Basic Video Settings
Codec: MainConcept MPEG Vide
TV Standard: PAL (I'm in Europe)
Frame: 720x576
Frame rate: 25
Field order: Lower
Pixel Aspect: Standard
Profile: Main
Level: Main
Render at max: off
Bit rate: VBR 2 pass
min bit rate: 2.4
Target bit rate 4.2
max bit rate: 6
GOP Settings
M & N frames: 3
Closed GOP: 0
Macroblock: 10
VBV buffer: 112
Noise: sensitivity
Write SDE: No
Force VBV oxfff
Intra DC 9bits
Write sequence end code: Yes
Embed SVCD: No
Ignore frame interval: 0

Turn on the Multiplexer. You have been exporting el;ementary streams resulting in two files, one for video and one for audio. You have to make the export a transport stream to get a single file with both video and audio.

Workflow Export 5.1 Audio to WAV

Similar Messages

Maybe you are looking for