Workflow external mail "Execute Workitem Link" not working

Hi all,
I am sendiing an external email as part of vacation approval.
This adds a link "Execute Workitem" automatically.
When user clicks on this,it is showing error message "Error reading the container element STEP_OBJECT"
after logging into portal.
Please help to either rectify this error or remove the execute workitem link from outlook mail.
Regards,
Ambily

Hi,
The parameters are configured in SWFVISU due to which it is openign custom screen correctly when the manager logs in normally to portal and access UWL.
The problem is only while using the "Execute Workitem" link.the problem is I am not aware of the parameters which leads to this link in external email.
There is an extended notification configuration in our system.Is this link coming due to this?
Kindly guide.
Thanks
Ambily

Similar Messages

  • External links not work

    Hello,
    I have a word document that has external links. Text that
    links to other page or other url.
    When I convert my doc (word document) into a swf using flash
    paper 2 the links not work. There are still highlighted but no
    linking is taking place.
    please help me.
    Thanks
    Alejandro

    I am having the same problem. At first I thought it was
    because I had converted an excel file but I tried the same
    information from a word document and the links do not work in the
    browser or if I view the SWF file separately. Additionally, when I
    convert the word file to a pdf none of the hyperlinks to pages or
    documents work but the links to email addresses do.

  • Execute workitem link

    In HCm forms  when it goes for first level approval..
    There is a link 'Execute Workitem' in the inbox of the approver...
    In the some application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
    The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
    Since it was working fine with some  application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
    Please can anybody suggest.
    Thanks in advance

    Hi,
    The parameters are configured in SWFVISU due to which it is openign custom screen correctly when the manager logs in normally to portal and access UWL.
    The problem is only while using the "Execute Workitem" link.the problem is I am not aware of the parameters which leads to this link in external email.
    There is an extended notification configuration in our system.Is this link coming due to this?
    Kindly guide.
    Thanks
    Ambily

  • Flash Global Security & Links Not Working?

    Hi all,
    I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
    I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
    When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
    Actionscript 3 on the Contact page looks like this:
    import flash.events.MouseEvent;
    //---Blog Button---\\
    var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
    Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
    function eClick(event:MouseEvent):void{
    navigateToURL(getBlog, "_self");
    //---Twitter Button---\\
    var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
    Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
    function eClick1(event:MouseEvent):void{
    navigateToURL(getTwitter, "_self");
    //---Flickr Button---\\
    var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
    Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
    function eClick2(event:MouseEvent):void{
    navigateToURL(getFlickr, "_self");
    //---Email Button---\\
    var getMail: URLRequest = new URLRequest("mailto:[email protected]");
    Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
    function eClick3(event:MouseEvent):void{
    navigateToURL(getMail, "_self");
    I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
    Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

    Thanks Samuel.Wong and Ned Murphy for the information.
    I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
    The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
    Maxx

  • Add new document link not working in upgraded sharepoint 2013?

    Hello there,
    Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
    is working fine with environment  Office web apps not configured with Sharepoint.
    Looking resoluion /suggestion, thanks in advance.
    Regards,
    Sushil

    Hi  Sushil,
    According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
    from 2010 to 2013.
    For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
    Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
    files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
    1.In SharePoint 2013 Central Administration, click Manage web applications.
    2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
    The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
    it using claims-based authentication, or you can change the authentication method of the web application.
    Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
    To do this, run the following command on the SharePoint Server:
    Get-SPWopiZone
    The result will be one of the following:.
    internal-https
    internal-http
    external-https
    external-http
    Next, run the following command on the SharePoint Server.
    Get-SPWOPIBinding
    In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
    the WOPI zone to match the result from Get-SPWOPIBinding.
    If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
    For more information, please refer to the article:
    http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Mail Per User Quotas Not Working

    We just migrated from 10.9 server to the new 10.10 server and noticed that our per user mail quotas were no longer working.  If I change the Server app - Mail setting - to have a global mail quota on it work, however, we have a few accounts that we need to leave unlimited and the per user quota will not override the global quota.  So far we have had to leave the global quota disabled because of this.
    Even without global quota turned off - trying to set per user mail limits is still not working.  We are changing it thru the Server app and clicking users - selecting a user - then select edit mail options - and changing the setting for the limit size.  No matter what we set it to - it will not work.
    Does anyone know what command or how to change the per user quota limits from the command line?  I found that Dovecotadm quota -u username  shows you what the quota is, but I am stumped as how to change it via a command line or thru another method since the server app is not working.
    Any help would be appreciated!
    ps. Also posted my doveconf -n file below, but I am missing if there is anything not configured properly.
    bash-3.2# dovecot -n
    bash: dovecot: command not found
    bash-3.2# doveconf -n
    # 2.2.5: /Library/Server/Mail/Config/dovecot/dovecot.conf
    # OS: Darwin 14.1.0 x86_64  hfs
    aps_topic = com.apple.mail.XServer.a1c54f6d-f4ad-4431-b882-0f11570dd637
    auth_mechanisms = cram-md5 plain login
    auth_socket_path = /var/run/dovecot/auth-userdb
    auth_username_format = %n
    debug_log_path = /Library/Logs/Mail/mail-debug.log
    default_internal_user = _dovecot
    default_login_user = _dovenull
    disable_plaintext_auth = no
    first_valid_gid = 6
    first_valid_uid = 6
    imap_id_log = *
    imap_id_send = "name" * "version" *
    imap_urlauth_submit_user = submit
    info_log_path = /Library/Logs/Mail/mail-info.log
    log_path = /Library/Logs/Mail/mail-err.log
    login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c
    mail_access_groups = mail
    mail_attribute_dict = file:/Library/Server/Mail/Data/attributes/attributes.dict
    mail_location = maildir:/Library/Server/Mail/Data/mail/%u
    mail_log_prefix = "%s(pid %p user %u): "
    mail_plugins = quota zlib acl fts fts_sk
    managesieve_notify_capability = mailto
    managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave
    mdbox_rotate_size = 200 M
    namespace acl-mailboxes {
      list = children
      location = maildir:/Library/Server/Mail/Data/mail/users/%%u:INDEX=/Library/Server/Mail/Dat a/mail/shared/%%u
      prefix = shared.%%u.
      separator = .
      subscriptions = no
      type = shared
    namespace inbox {
      inbox = yes
      location =
      mailbox Drafts {
        special_use = \Drafts
      mailbox Junk {
        special_use = \Junk
      mailbox Sent {
        special_use = \Sent
      mailbox "Sent Messages" {
        special_use = \Sent
      mailbox Trash {
        special_use = \Trash
      prefix =
    namespace list-archives {
      list = children
      location = maildir:/Library/Server/Mail/Data/listserver/messages/archive/lists/%%u:INDEX=/ Library/Server/Mail/Data/listserver/messages/archive/shared/%%u
      prefix = archives.%%u.
      separator = .
      subscriptions = no
      type = shared
    passdb {
      driver = od
    passdb {
      args = /Library/Server/Mail/Config/dovecot/submit.passdb
      driver = passwd-file
    plugin {
      acl = vfile:/Library/Server/Mail/Config/dovecot/global-acls:cache_secs=300
      acl_shared_dict = file:/Library/Server/Mail/Data/shared/shared-mailboxes
      fts = sk
      quota = maildir:User quota
      quota_warning = storage=100%% quota-exceeded %u
      quota_warning2 = storage=85%% quota-warning %u
      sieve = /Library/Server/Mail/Data/rules/%u/dovecot.sieve
      sieve_dir = /Library/Server/Mail/Data/rules/%u
      stats_refresh = 30 secs
      stats_track_cmds = yes
    protocols = imap lmtp sieve pop3
    quota_full_tempfail = yes
    service auth {
      extra_groups = _keytabusers
      idle_kill = 15 mins
      unix_listener auth-userdb {
        user = _dovecot
    service dns_client {
      unix_listener dns-client {
        mode = 0600
    service imap-login {
      inet_listener imap {
        port = 143
      inet_listener imaps {
        port = 993
        ssl = yes
      service_count = 0
    service imap {
      client_limit = 5
      process_limit = 200
      service_count = 0
    service indexer-worker {
      user = _dovecot
    service lmtp {
      unix_listener lmtp {
        mode = 0600
    service managesieve-login {
      inet_listener sieve {
        port = 4190
    service pop3-login {
      inet_listener pop3 {
        port = 110
      inet_listener pop3s {
        port = 995
        ssl = yes
    service pop3 {
      client_limit = 5
      process_limit = 200
      service_count = 0
    service quota-exceeded {
      executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-exceeded .sh
      unix_listener quota-exceeded {
        group = mail
        mode = 0660
        user = _dovecot
      user = _dovecot
    service quota-warning {
      executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-warning. sh
      unix_listener quota-warning {
        group = mail
        mode = 0660
        user = _dovecot
      user = _dovecot
    service stats {
      fifo_listener stats-mail {
        mode = 0600
        user = _dovecot
    ssl = required
    ssl_ca = </etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.chai n.pem
    ssl_cert = </etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.cert .pem
    ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!ADH:!eNULL
    ssl_key = </etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.key. pem
    ssl_key_path = /etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.key.p em
    userdb {
      args = partition=/Library/Server/Mail/Config/dovecot/partition_map.conf global_quota=0 enforce_quotas=yes
      driver = od
    userdb {
      args = /Library/Server/Mail/Config/dovecot/submit.passdb
      driver = passwd-file
    verbose_proctitle = yes
    protocol lmtp {
      mail_plugins = quota zlib acl fts fts_sk sieve
    protocol lda {
      mail_plugins = quota zlib acl fts fts_sk sieve push_notify
    protocol imap {
      mail_max_userip_connections = 20
      mail_plugins = quota zlib acl fts fts_sk imap_acl imap_quota imap_zlib
    protocol pop3 {
      mail_max_userip_connections = 6

    I guess the problem didn't resolve itself, rather it has revealed that it is intermittent (my favorite kind).
    What could made a message sent to a legitimate alias username not get picked up during the imap connection. I know the smtp server accepted the message (see logs above).

  • Mac mail search function is not working. Any search term returns all records.

    Mac mail search function is not working. Any search term returns all records.

    hi eric. many thanks.
    i will have to read these links closer but what i meant to say is that the hard drive space that was being taken up seemed like it suddenly jumped way up because i had just gotten through a process in the last month where i am storing all my My Documents data on my Mac Pro. i am doing this in order to decide whether i should just keep it ALL on my Mac Pro and use ChronoSync to sync /some/ of it to my MBP.
    so if i look in the Documents folder on my Mac Pro i have a ton of folders that i have created with a ton of data. if i look in the Documents folder on my MBP there are NO folders that have data in them that i created. there are other folders such as folders that various software created but what i mean to point out is that there was a LOT of available space on my HD until recently.
    i am wondering if there is some way that running the Mail re-index (it then ran some kind of "Importing" routine) or by syncing my Photostream to the MBP caused a huge jump in data on this drive. if it is the photostream sync i can just take this off or see if it will sync more selectively. if it is something to do with mac mail jumping in size i am not sure why this would happen or what to do about it.
    does that question make sense?
    i mean, before i did these two operations my recollection is that i would have had 130 GB on the hard drive (really just guessing here) and now there is like 218 GB on the hard drive and i don't know where all this came from...

  • Adobe Edge links not working

    Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

    When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
    The hosts file is in /private/etc/hosts and can be accessed through the terminal:
    sudo nano /private/etc/hosts
    If you see a bunch of adobe servers in there, that is your problem.

  • IBM cognos TM1 Executive viewer is not working on direct Access

    Hi,
    We are implementing DirectAccess in our environment and testing applications in test lab. It has been observed that executive viewer is not working on Direct Access but working fine over VPN mobile checkpoint. When DA client click on open view button it
    gives error
    " Additional information:
    Unable to connect to server XYZ.com using TCP-IP port 7112. Please make sure that IBM cognos TM1 executive viewer server is started and the port is not blocked by any proxy server or firewall"
    but from client telnet is working on port 7112. All ports between DA server and application server are open 3389,7112 and 80.
    Also select database option is grayed out and user is unable to select the database. When switching to VPN its working fine.
    We are using Executive viewer 9.4. 
    Any help would be appreciated.

    It sounds like this program may not be capable of talking over IPv6, which DirectAccess uses. First make sure that when you connect it is trying to talk to a hostname and not an IPv4 address. If your program is calling for "192.168.1.100" - this is never
    going to work over DirectAccess. It must call for a name that DirectAccess can resolve to an IPv6 address for communication over DA.
    If you confirm it is talking to a name, and then if you confirm that you can do other things to that same name (can you RDP into the server for example?), then that confirms that DirectAccess traffic flow is working to that name/server.
    If RDP works but the application still doesn't work, then the application is probably incapable of IPv6. You can either ask IBM if they have a newer version that does talk IPv6, otherwise I have a utility available that can intercept packets from these kinds
    of problematic applications and flip the packets into IPv6 on the DA client. Let me know if you need any further information on that: http://www.ivonetworks.com/news/2013/05/ivo-networks-announces-app46-for-directaccess/

  • Hello,  I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users.  Mail icon was accidently removed along with program.  Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

    Hello,  I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users. 
    About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user.  Oops.
    1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X. 
    2. I reloaded software from my user with original disks  (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS.  I am unable to load Mail.  Gives Yellow error message.    
    "  You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
    3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
    Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
    Ideas?
    MattDeeds

    Matt,
    I would download and run the 10.6.7 combo update.
    http://support.apple.com/kb/DL1361
    Regards,
    Captfred

  • In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

    MacBook Pro (Retina, 15-inch, Late 2013)
    2,6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 750M 2048 MB
    OS Yosemite,
    Finder versión 10.10.1
    Mail Versión 8.1 (1993)
    In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
    1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
    2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
    3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
    Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
    1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
    2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
    3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
    4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Fresh Install HCM 9.1 but Links not working. Help please

    Dear All,
    I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
    I downloaded all software from eDelivery.
    HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
    First Try:
    Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
    Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
    Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
    Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
    Second Try:
    Installed Virtual Box.
    Installed Windows 2008 R2 and applied the SP1.
    Installed everything all over again.
    Ensured the PTWEBSERVER password similar the username.
    Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
    Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
    Tried to login again, no error message and everything looks fine but... links not working.
    Logs also looks normal to me.
    Does anyone ever encountered similar issues before?
    Does this is a normal behaviour before tools patch 85211 being applied ?
    Thanks,
    aLuNa
    My APPSRV Log:
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
    PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
    PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
    PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
    PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
    PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
    PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
    PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

    alunwawa wrote:
    Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
    Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
    I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
    Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
    Nicolas.
    PS: @Jim, thanks for the kind words.
    My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

  • I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?

    I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?

    Thank you for your time Woody. Recently the Mac seems to freeze a lot, seemingly due to a problem with the airport, especially if the computer is inactive for anything more than a few minutes. Then yesterday I suddenly couldn't send or receive messages so I got in touch with my server and they reconfigured the mail account. I can now receive messages but can't send them, always getting a timed out message when I try to send an email. I phoned the server again and they said it must be a problem with Mail as we tried sending a message online from the server's webpage and it worked fine, so they suggested I reinstall Mail. So hence my original question. Sorry for the rambling! I'm not very computer minded.

  • Purchased Lightroom 5 and Download link not working. Please advise

    I have Purchased Lightroom 5 followed the download instructions and Download link not working.
    I get a dialog box stating that I have Explorer 4 and I need a later version.
    I am in fact running Explorer 10.
    Please advise.
    Bob Spree
    England

    Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

  • External display monitor suddenly is not working; power is on

    Hello,
    My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
    Is this monitor just suddenly broken, perhaps through it's internal connection devices??
    Thanks!!
    alidocs

    Dear Shankar,
    Issue is solved. It was Program Error from SAP side.
    Now All the buttons are working fine and I am able to print PDF also.
    Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
    System Details : ECC 6.0 NetWeiver 7.4 ,
                                EHP 7 , SP-Level 06
    Thanks a lot for all your suggestions.
    Regards,
    Namsheed.

Maybe you are looking for