Workflow for changing framerate of MTS files

I'm working on a 6 camera shoot and one of the cameras shot in 30p as opposed to 24P. I was just wondering what the quickest workflow would be for changing the framerate. All the shots for this camera don't require the use of it's audio. Is this something I would be able to use Cinema Tools for? I was going to go ahead and process the clips through log and transfer to get them to Prores LT.

At the risk of ******* off my esteemed college Nick, Cinema tools will not retime the video. It will give you a 24fps version of a 30fps original with all frames playing. That is, you will end up with a SLOWED version. If that's your intent, ok.
Otherwise, you need to use Compressor to retime the thing.
x

Similar Messages

Workflow for Changing Item Level Permission in SharePoint 2013 (Office365)

I am using OOTB Tasks List in SharePoint 2013 (O365). Now my scenario is like this:
I have two user groups: 1.Sales Managers 2. Sales Executives
Sales Managers can create & assign task to Executive. I want something like Sales Managers Can view all tasks (Which is by default view of tasks list i.e. perfact) but Executives can see only their tasks assigned to them. How can I achive this?
Can I use WorkFlow for this to Change item level permission or to assign permission to assigned to user? or JS
Can anyone have proper solution? thanks

1. make 2 SharePoint group 1>Sales Managers 2>Sales Executives
2. Show 2 WP of same task list in same page.
3. Use Audience Target for Sales Managers Sharepoint group in first Webpart property. (All
Iten view)
4. Show "My Task" view (assign to =[Me]) Bottom WP for same task list and use Audience Target for Sales Executives. Or if you want it to see
Sales Managers as well, the dont use any Audience Target.
Bottom line - SharePoint group use in Audience Target will do the trick. OOTB
Regards Sudip Misra [email protected] +1-412-237-5435 Pittsburgh, PA

What recommendations do you have for converting AVCHD Sony .mts files to apple .m4v movies?

I have a 3 yo Sony HD camcorder that records HD movies in AVCHD (.mts) format. I can view, edit and combine these movies on my Windows 7 PC w the Sony PMB (Picture Motion Browser). PMB can convert any clip to make a SD or HD Blu Ray disc. However for viewing on other computers, it will only convert my .mts movies to a .mov or .wmv format.
I would like to convert these .mts files to apple mpeg-4 ( .m4v) files, for ease of viewing on apple AND/OR windows laptops/desktops and to allow my friends/family the ability to edit or combine these movie clips on their iMac w iMovie.
Do you have any "pay" or shareware or freeware products that you recommend? I don't want a super complex or super expensive program, rather something that is relatively simple and easy to use and that converts it to .m4v within a reasonable amount of time.
Recommendations?

Its confusing but iMovie '11 (the version that came with iLife 2011) is iMovie version 9.
I think .m2ts files will work the same as .mts files. The program in the link is free for what you want to do so you could thy this out. I have never used it myself so I can't vouch for it. I searched under ".mts to .m4v converter" and it came up with this. You can probably find other options if you Google around.
As I indicated iMovie '11 won't import 'bare' .m2ts files, only iMovie 10 (the Mavericks version) can do that but it should accept .m4v. I don't remember wheter .m4v is an output option but .mov certainly is.
I had assumed that you wanted to do more detailed editing in iMove but if you only want to trim it then indeed you don't need to use iMovie at all.
.m4v is not the only format which is cross-platform. I think .mov is OK on Windows if you have Quicktime installed (though I don't use Windows at all).
I hope this helps,
Geoff.

How to find the workflow for Change Request for the PO's

Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
Sonia

For 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

Material master workflow for changes

Hi Experts
I have a requirement to trigger multiple material workflows for all the plants that have a blocked status in MRP1 when the material gets uploaded into SAP from a third party.
I have used SWEC and created a new 'MaterialChanged' event and put a start condition for the workflow to look at the MRP1/status.
This looks to work fine as long as there is one plant and its MRP1 has blocked status. I am not able to figure out how to handle if there is a multiple plant specific data for a material and all or some of the plants are blocked, this is when multiple workflows are expected to trigger for each plant. Each plant has got different set of approvers.
Because I think the 'trigger' will happen only once for a material irrespective of how many plants the material may have.
If any of you have handled this kind of scenario, appreciate your help.
Thanks
Sasi

Hi,
I think the easiest would be to just echance the business object with an attribute if there are any plants with the blocked status.
then in your workflow, you retrieve how many plants there are with blocked status and then use that data in the other tab for multiline element in a subworkflow.
This will create all the workflows per plant.
Kind regards, Rob Dielemans

Activating Workflow for Change Documents

Hi
I am working in cProjects 4.0 on ECC6.
I am working on the scenario of automatic email generation when change document is created for project element.
I have used sample workflow WS28700006 and following settings have been made :
1. Make the required settings in the SAP menu under Tools → Business Workflow →
Development → Definition Tools → Events → Event Creation → Change Documents
→
a. Overview (transaction SCDO)
Enter DPR_PROJECTS in the table.
b. Define Workflow Properties (transaction SWED)
Enter the following data:
Change document object DPR_PROJECT
Leading table in change document DPR_PROJECT
Change document key with structure DPR_PROJECT
Action: Change X
Structure DPR_TS_BUSINESS_OBJECT_KEY
Function module BAPI_BUS2175_OBJECT_KEY_SET
c. Linkage (transaction SWEC)
Enter the following data:
Change document DPR_PROJECT
Object category BOR object type
Business object type BUS2175
Event CHANGED
On change X
In cProjects I have I have attached word document, and another user changed it and changed document again checked in again with overwriting the old one.
But no workflow triggerd. In SWI1 transaction I cannot see any workflow triggered.
Is there any problem with workflow and process or changing document in cProjects is not write ????
Can someone help ????
Regards,
Niraj Sikligar

Hi Niraj,
Please ensure that you have made IMG setting for cProjects > Basic Settings>'Activate Change Documents'.
'Change Documents' means that any change in the Project Objects will be recorded, and not the changes in the documents that have been attached.
I am not too sure about the workflow settings that you have made, but just try with the img activity that I've mentioned. You can test the same by making some changes in Project ( for eg change the Project Status) and save it.
Let me know if it helps.
Regards,
Vivek Pandey

In MRP for changing MTO to MTS for raw materials

Hi guys,
I am getting one problem that i have changed for raw materials fron individual indiactor to clollective indicator to get its Purchase requistion for MTS. But in MD02 or IN MD04 it is still showing PR for individaul sales order in some cases.Can you pl.tell me why it is so.
regards

Please check the following..as Mat.master settings may be overrided as per below..
You can maintain this indicator in the following places:
In the material master record
For the explosion type of the BOM item (in Customizing for Basic Data in Define Explosion Types)
The setting for the explosion type overrides that in the material master record.
Dependencies
If the material is assigned to a material type that does not allow quantity-based inventory management in this plant, you can set the indicator to individual requirements only.
If the stock is to be managed in sales order stock or project stock, the indicator must be set to one of the following options:
Individual and collective requirements
Individual requirements only
If a material managed in project stock is to be procured from another plant using a cross-company-code stock transport order, the indicator must be set to 2 (collective requirements) in the issuing plant because, in this specific context, individual project stock management is not possible in both plants.

SDK sample code for Changing name of Exported file thru Webi schedule

Hi experts,
I am wanting to know if someone has got any sample Java SDK code which I can use to login to FTP and rename the pdf files generated from webi schedule script and append customised date format towards the end.

Hi Prabhat,
For online samples
https://www.sdn.sap.com/irj/boc/samples
For detalied descripation on BO SDK.
https://www.sdn.sap.com/irj/boc/sdklibrary
For BOE SDK guide.
http://help.sap.com/businessobject/product_guides/boexir31/en/boesdk_java_dg_12_en.zip
This would give you complete information on scheduling.
For RE SDK guide.
http://help.sap.com/businessobject/product_guides/boexir31/en/resdk_java_dg_12_en.zip
This would give you information on how deal with Desktop intelligence report and Web intelligence report.

Question about GENERAL WORKFLOW FOR DELIVERING DOLBY 5.1 FILE

what I have usually done with my videos is to export omf to logic , and mixed in 5.1, from there i bounce in multichannel audio file, and open it i compressor and create there my AC3 file.
is that all to get a professional accepted DOLBY DIGITAL FILE AUDIO file?
what is real professional workflow used in feature films and main studios? I SEE hardwares around as dolby e etc
please help me to clear my confusion

I've tried this myself and have had no luck with the resulting blu-ray 5.1 mix. When I import a 5.1 AC3 file into Encore as an asset and create a new Audio track, or when I open a Premiere CS5 project with a 5.1 master audio track and use dynamic link to send it to Encore, it always mixes it down as a stereo blu-ray.
I have the SurCode plug in activated as well. The blu ray file folder "STREAM" contains a file that I've tried importing into Premiere and when you look at the audio track it's always stereo, never 5.1

Best initial settings in Premiere Pro CS5 for JVC Everio HD .mts files

I have a JVC Everio HD Camera and I was wondering what would be the best setting to import the files? Should I just do the generic widescreen 16:9 setting? I believe the resolution is 1920 x 1080. I'm using the best setting which is UXP, but JVC told me that it's for Blueray. It seemed a little jumpy, but I chose regular dvd setting.

The PPro tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5 - where there is a description of the NEW ITEM process

MTS File Conversion for iMovie

Dear Apple Support Community,
I am struggling with movie file conversions, and getting the optimum results from such a process before starting my editing work in iMovie.
I have a Canon HD camcorder which records movies according to AVCHD standards. Before using iMovie, I need to convert the .MTS files to a format which is compatible with iMovie, and I have tried the following:
Copy the files from the SD card on to my HDD.
Using Toast 11 (Titanum), I have selected different profiles to convert the file to formats such as MOV, M4V, MP4 etc.
The converted files yields a size that does not match the original one i.e. a 300 MB file after being converted, is now either 791 MB, or 96 MB in this case.
When importing the converted file into iMovie, iMovie still wants to optimize the file for some reason (I believe using APPLE INTERMEDIATE CODEC resolves the optimization issue)
Import the files directly from the SD card into iMovie, provided I have not altered the original file structure i.e. when inserting the SD card, iMovie recognizes the SD card the same way it would for connecting the Camera.When I select the videos to be imported, iMovie does so without hassles, but the files again turn out to be bigger than the original file by a factor of between 2 and 3, depending on the original file.
What is the best way to convert files to preserve the quality as close as possible to the original?
Is it normal for coverted files to be larger than the original file after being converted (smaller makes sense, but bigger just baffles me)
Thanks for any feedback!

Thanks for the great feedback.
I do have struggles though in general, part of which originates from my camera itself.
My camera still has a tendency to record an interlaced effect even though my settings are confidently selected to progressive (I have 50i and 25p to choose from - 25p is my selection).
However, when I use Toast Titanium, I have an option to select the source video to be deinterlaced, but Toast does not do a good job at deinterlacing, compared to Handbrake. The benefit of my Toast Preset is that I can covert the video to an Apple Intermediate Codec, which means that when the files are imported into iMovie, the process is rather quick.
When I convert using Handbrake, the software does a pretty **** good job at deinterlaing, but the downside is that I cannot find a preset that makes import into iMovie satisfactory.
So, in light of all this long discussion I gave, my question is really, what is the best file converter for iMovie to convert MTS files that need to be deinterlaced.
Thanks for any help!
Adios

Efficient way get FCE4 Log and Transfer to read .mts files stored on drive?

Hi All
I've searched the FCE discussion forum and not found an answer verified by more than one user to this question: What is an efficient way to get FCE4 (via the Log and Transfer window) to see .mts files from an AVCHD camera stored on a drive (NOT via the camera -- directly from the drive)?
I am trying to plan the most space-efficient system possible for storing un-transcoded .mts files from a Panasonic AG-HMC151 on a harddrive so that I can easily ingest them into FCE4. I am shooting a long project and I want to be able to look at .mts files so that I can decide which ones to transcode to AIC for the edit.
Since FCE4 cannot see .mts files unless they have their metadata wrapper the question is really 'how do I most efficiently transfer .mts files from the camera to a storage harddrive with their metadata wrappers so that FCE4 can see them via the log and transfer window?'
Nick Holmes, in a reply in this thread
http://discussions.apple.com/thread.jspa?messageID=10423384&#10423384
gives 2 options: Use the Disk Utility to make a disk image of the whole SD card, or copy the whole contents of the card to a folder. He says he prefers the first option because it makes sure everything on the card is copied.
a) Have other FCE users done this successfully and been able to read the .mts files via Log and Transfer?
In a response to this thread:
http://discussions.apple.com/thread.jspa?messageID=10257620&#10257620
wallybarthman gives a method for getting Log and Transfer to see .mts files that have been stored on a harddrive without their metadata wrappers by using Toast 9 or 10.
b) Have any other FCE4 users used this method? Does it work well?
c) Why is FCE4 unable to see .mts files without their metadata wrappers in the Log and Transfer window? Is it just a matter of writing a few lines of code?
d) Is there an archiving / library app. on the market that would allow one to file / name / tag many .mts clips and view them prior to transcoding into space-hungry AIC files in FCE?
Any/all help would be most gratefully received!

I have saved the complete file structure on DVD as a backup, but have not needed to open them yet. But I will add this. As I understand the options with Toast you are infact converting the video to AIC or something like it. I haven't looked into it myself, but I can't imagine the extra files are that large, but maybe there are significant, I don't know. The transcoded files are huge in comparison to the AVCHD file.
A new player on the scene for AVCHD is Clipwrap 2.0. As I understand this product. It rewraps the AVCHD into a wrapper the Quicktime can open and play. This is with the MTS files only, the rest of the file structure is not needed. The rewrap is much faster that the transcode to AIC. So you have the added benefit of being able to play the files as well as not storing the extra files. The 2.0 version (which is for AVCHD) was just recently released. I haven't tried it and don't personally know of anyone who has. You might want to try this, there is a trial version as I recall.

Workflow for Address Book

Is there a workflow for changing all caps to upper and lowercase in address book? My card scanner annoyingly often scans info in caps.
thanks,

Hmm. iLife '05? The Address Book is not an iLife '05 component, but rather a basic application installed by Mac OS X. At any rate…
Launch the Address Book. You must be running Mac OS X 10.4, iCal 2 and Address Book 4 at a minimum to take advantage of the creation of the Birthdays calendar in iCal by entering birthday data in your Address Book contact records.
Select a record to update and press the Edit button at the bottom of the main window. If the 'birthday Birthday' field label and field do not appear, open your Preferences… dialog and choose the Template pane, then add the birthday field by selecting it from the drop down menu labeled Add Field.
Close the Preferences… dialog, enter data, repeat…

Approvals for changes to a provisioned resource

I need to create an approval process for updating individual fields on the process form. The resource does not allow multiple accounts, so the option to update it doesn't seem possible. I know there is something I am missing here.
What is the best way to create an approval workflow for changes to an existing provisioned resource?
Any suggestions are greatly appreciated!
KC

Hi,
OIM dosn't support approval based resource modification,this is one thing we are lacking in OIM but there are few way to over come this.Here is one solution that I can think of.
1.Create a dummy resource for example "OID Resource Modification".
2.Create the resource form which will have all field name which can be modified.
3.Let this field value flow into process form of OID Resource Modification.
4.Create your approval process for this resource.
5.Now in the provisioning process of OID Resource Modification you can have task which will update the process form of orignal resource.
6.You will be requesting this resource modification.
Please let me know if you have any questions.
Regards
Nitesh

FCP X workflow for export to MP4...

Hello
i would love if someone helped me and broke out a workflow for exporting to a MP4 file with a 2500kbps +, 1920 x 1080 or 1280 x 720.
in previous FCP no problemo - i'm really struggling with this.
i have FCP X 10.1.3 and compressor 4.1.3
Mac X, 10.9.4, 1.7Ghz, Core i7
I want to upkeep the max quality
I have a high quality audio track over top of a string of PNG files (basically powerpoint slides exported to PNGs) from a PPT presentation.
thanks a ton!
jks

Create a custom setting in Compressor by clicking the plus button in the bottom of the Settings pane of Compressor. In the drop down, choose MPEG 4. Make your adjustments in the Inspector. In FCP, choose Compressor Settings from the Share menu. That will open Compressor. Choose your MP4 setting.
Russ

Workflow for changing framerate of MTS files

Similar Messages

Maybe you are looking for