Workflow for creating a very large collage for a wall paper

I have a bunch of photos shot with a canon t4i. My plan is to blow up all the photos and make a collage to print out on wall paper for a wall. I shot all of these photos in RAW. The dimensions of the wall are 101h x 106w. Yes, this collage bogs down my computer to the max. Its ridiculous. But anyways, I am having trouble retaining sharpness in my photos on my collage. I am a beginner with editing raw photos so that might be a problem.
This is what I did.
Open new photoshop (101x106")
Edit all photos in camera raw
drag photos from bridge on to photoshop
place and adjust size of each photo
what would you do differently to retain sharpness? It is important that it looks as best as possible because it will be in a small room in the foyer of our office.
Thanks,
Riley

I see two problem. On the print size exceed all the printers I know of. The widest printers that Epson make can only print 64" wide. Even if you cut your collage into two with some overlap for alignment. It would be a nightmare applying 54" wide wallpaper to a wall. There might be a third problem with cost a Epson printers that can print 54" wide rolls starting price is $10,000.00 and go up to $25,000.00. Expensive wallpaper. And you still need the paper and ink.
For a collage that large you do not need to print at 300 DPI for you will not be viewing the wall that is big and over your height up close where the human eye can resolve down to 300 dpi. In you collage you also show only three image across the top row. Some wider the others. Look at your Cannot T4I the would mean some image would be printed between 35" to 40" wide. without interpolation your 18MP images printed that size would meant they would print in the 130 to 150 DPI range. To interpolate from 130-150 to 300 would requite increasing the pixel count in the range of 400 to 500 percent. That is a lot of interpolation. I would not do that. I would actually create the collage at 150 DPI. That resolution should be good for an image that large. That Collage would not tax Photoshop as much. The 300DPI collage image would be 106x300x101x300=963,540,000 at 150DPI the same image would be 106x150x101x150=.240,885,000 the is 1/4 the number of pixels.
I would flatten the collage and cut it into 7 ovelaping stripts around 16" wide

Similar Messages

Can anyone recommend a VERY easy to use program for creating a very basic app for my iPhone4?

I just want to be able to enter a few fields of data and have it emailed to my office. Any suggestions? I am not a programmer, so easy is the key word here.
I work for a craft brewery and I want to be able to enter some basic repedative info from kegs of beer and how the beer pours back to our brewery for quality controll.
Thanks gang!

This is easily accomplished using HTML5 and JavaScript. In this case, the most difficult part will be encoding the mailto URL. Most people don't realize that the you can stuff an entire email message into a mailto URL, not just an e-mail address.
In this model, you would compose a web-page (one or more files) and include a manifest file (that lists the files used for that page), and reference the manifest file in the page itself. You would then browse to the page, and save a bookmark to the page on the phone's springboard (an icon on the home screen). By including a manifest, all the files that make up the page are copied to your device and you can use the application locally.
In fact, HTML5 on iOS permits you to write databases, draw graphs, make animations, etc. What you can't do is access other apps from within the HTML5 app (outside of using URLs).
In your particular scenario, though, if there's network connectivity in the brewery, I would suggest a regular web-application on the phone and write a little front-end to some database. You also have options like FileMaker Go, Numbers for iPhone, etc.

FM/BAPI for creating the credit memo request for Vendor

Hi Experts,
I need an RFC/BAPI, for creating the credit memo request for Vendor.
Thanks in Advance,
Kiruba.R

Hi,
Use this BAPI 'BAPI_DRMCREDITMEMOREQ_CREATE' - Credit Memo Request Creation
Regards,
Jyothi CH.

I inadvertently created a very large file. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ?

I inadvertently created a very large file on my hard drive. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ? I re-installed the OS but the file was still there taking up needed space.

Command-click all of the files you want to delete and don't actually move them to the Trash until you've gone through the entire folder.
(63341)

Any FM for create an external number range for equipment number ????

Hi all,
Any FM for create an external number range for equipment number??????
thanks & regards
indu.

Hi
you can use below FM to get number range
   CALL FUNCTION 'NUMBER_GET_NEXT'
    EXPORTING
      nr_range_nr                   = 'Z1'
     object                        = 'ZTEST'
     object                        = 'ZFIREC'
     quantity                      = '1'
     subobject                     = p_compcd
     toyear                        = p_fisc
   IMPORTING
     number                        = v_seqno.
thanks & regards,
bhupal.

Best data Structor for dealing with very large CSV files

hi im writeing an object that stores data from a very large CSV file. The idea been that you initlize the object with the CSV file, then it has lots of methods to make manipulating and working with the CSV file simpler. Operations like copy colum, eliminate rows, perform some equations on all values in a certain colum, etc. Also a method for prining back to a file.
however the CSV files will probly be in the 10mb range maby larger so simply loading into an array isn't posable. as it produces a outofmemory error.
does anyone have a data structor they could recomend that can store the large amounts of data require and are easly writeable. i've currently been useing a randomaccessfile but it is aquard to write to as well as needing an external file which would need to been cleaned up after the object is removed (something very hard to guarentee occurs).
any suggestions would be greatly apprechiated.
Message was edited by:
ninjarob

How much internal storage ("RAM") is in the computer where your program should run? I think I have 640 Mb in mine, and I can't believe loading 10 Mb of data would be prohibitive, not even if the size doubles when the data comes into Java variables.
If the data size turns out to be prohibitive of loading into memory, how about a relational database?
Another thing you may want to consider is more object-oriented (in the sense of domain-oriented) analysis and design. If the data is concerned with real-life things (persons, projects, monsters, whatever), row and column operations may be fine for now, but future requirements could easily make you prefer something else (for example, a requirement to sort projects by budget or monsters by proximity to the hero).

JRockit for applications with very large heaps

I am using JRockit for an application that acts an in memory database storing a large amount of memory in RAM (50GB). Out of the box we got about a 25% performance increase as compared to the hotspot JVM (great work guys). Once the server starts up almost all of the objects will be stored in the old generation and a smaller number will be stored in the nursery. The operation that we are trying to optimize on needs to visit basically every object in RAM and we want to optimize for throughput (total time to run this operation not worrying about GC pauses). Currently we are using hugePages, -XXaggressive and -XX:+UseCallProfiling. We are giving the application 50GB of ram for both the max and min. I tried adjusting the TLA size to be larger which seemed to degrade performance. I also tried a few other GC schemes including singlepar which also had negative effects (currently using the default which optimizes for throughput).
I used the JRMC to profile the operation and here were the results that I thought were interesting:
liveset 30%
heap fragmentation 2.5%
GC Pause time average 600ms
GC Pause time max 2.5 sec
It had to do 4 young generation collects which were very fast and then 2 old generation collects which were each about 2.5s (the entire operation takes 45s)
For the long old generation collects about 50% of the time was spent in mark and 50% in sweep. When you get down to the sub-level 2 1.3 seconds were spent in objects and 1.1 seconds in external compaction
Heap usage: Although 50GB is committed it is fluctuating between 32GB and 20GB of heap usage. To give you an idea of what is stored in the heap about 50% of the heap is char[] and another 20% are int[] and long[].
My question is are there any other flags that I could try that might help improve performance or is there anything I should be looking at closer in JRMC to help tune this application. Are there any specific tips for applications with large heaps? We can also assume that memory could be doubled or even tripled if that would improve performance but we noticed that larger heaps did not always improve performance.
Thanks in advance for any help you can provide.

Any suggestions for using JRockit with very large heaps?

Jtree - Problem creating a very large one

Hi,
I need to create a multi-level JTree that is very large (aroung 600-650 nodes all in all). At present I am doing the same by creating DefaultMutableTreeNodes and adding them one by one to the tree. It takes a very long time to complete(obviously).
Is there any way of doing this faster? The tree is being constructed from run-time data.
Thanks in advance,
Regards,
Achyuth

Two thoughts. First, I create 100's of nodes and it's pretty fast. It could be how you are creating/adding them. Make sure your code is not the bottleneck. If you are traversing the entire tree or some other odd way of doing it, it could be the problem. I only say that because I am able to create an object structre, parse XML as I create that structe and create all the nodes and its less than 1 second on a PIV 1.7Ghz system. Maybe on slower systems its a lot slower, but for me its up immediately.
Another way, however, is to keep a Map of "paths" to child items in memory. As you build your object from whever, use a Map to keep path info. Now, add listeners to the tree for expand/collapse. Each time it is about to expand, build up the nodes and add them to the expanding node at that point. If it collapses, discard them. This does one of two things. First, for large trees, you aren't wasting tons of time building the tree at the start, and more so, its probably likely that all those nodes aren't going to be expanded/shown right away. Second, it conserves resources. If your tree MUST open in a fully epxanded state, well, then you may be out of luck. But I would much prefer epxanding and building the child nodes at that moment, rather than do the whole thing first.

Why does the persona that I created get very large when I post it even though its the correct dimensions?

Every time we try and upload our persona, it shows up on screen very large. It seems like the dimensions are oversized and shows up on screen as only about 1/4 of the full design. Its like an extreme close up view of what what we built. We've built it to the specs provided on the site. If you want to check it out, the persona was created by Worth. Any suggestions on how to fix this?

- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

I need the code for creating popup windows and code for open and close

I can write the code for creating popup window , i am getting problem while trying to open and closing that popup windows.
Can anybody help me in that pls ?
Regards
Sreeni.

Hi
For pop up window
IWDWindowInfo windowInfo = (IWDWindowInfo)wdComponentAPI.getComponentInfo().findInWindows("PopWin");
IWDWindow window = wdComponentAPI.getWindowManager().createModalWindow(windowInfo);
window.setWindowPosition (300, 150);
window.show();
wdContext.currentYourNodeElement().setPopupAttribute(window);
For closing window code
IWDWindow window = wdContext.currentYourNodeElement().getPopupAttribute();
window.hide();
window.destroyInstance();
For more infornation refer this link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20d2def3-f0ec-2a10-6b80-877a71eccb68&overridelayout=true
This link is very useful for you.
Regards
Ruturaj
Edited by: Ruturaj Inamdar on Aug 13, 2009 9:10 AM

T code or path for creating Z out put type for picking

if I need to create u201CZ u201Cout put type for picking list copying standard out put type( EK00). Which T- code I have to use or which path , I have to follow in IMG .
I want to create u201C Z u201Ccondition type for picking list , copying EK00 which is standard condition type for picking list .
Thanks u2026

it is part of V4 application, if you dont see V4, use tcode v/38 .... there you will find it.

Do I have to pay for creating a iTunes or pay for the apps??

- Okay, I'm new to iTunes, do we have to pay for creating a iTunes with a monthly fee? Or pay by the drink? (Meaning: Pay for the apps that's not free.)

iTunes is a Free Download... Apps are either Free or Cost money... depending on the App.

Print comes out very large and oversize on my paper

I have photosmart 6180. When I print my stuff, suddenly everything is coming out oversized and very very large. One page takes about 3 sheets to print. How can I correct this setting? My emails will print normal size but not the stuff from the website ;

Hi Gatorjack61,
What operating system are you using ?
What about if you print a photo that is saved on your computer, does it look normal or oversized ?
You can try the steps below which were suggestions from banhien and Pushkarpathania in this post.
You can shrink before sending to printer (well also enlarge).
Just use Print > Print Preview
Under Shrink small drop down window, just select the right % for you.
Or you could try Pushkarpathania's suggestion:
•Click the arrow next to the Print button , click Print Preview, and then click Custom in the Change Print Size list. Specify how large you would like the webpage to be printed by setting a percentage in the Custom Size text box. This will enlarge the printed size of the entire webpage, but it might result in some of the webpage being cut off in the printed document. For more information about print preview.
1. Open Internet Explorer by clicking the Start button . In the search box, type Internet Explorer, and then, in the list of results, click Internet Explorer.
2. Click the arrow next to the Print button , and then click Print Preview.
3. In the Change Print Size list SHRINK TO FIT , click Custom.
4. In the Custom Size text box, specify how large you want the webpage to be printed by setting a percentage. This will enlarge the printed size of the entire webpage, but it might result in some of the webpage being cut off in the printed document.
Hope this is helpful.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Optimal arrangement for maintaining a very large iTunes Library

My wife buys tons of television shows on iTunes, watches them on business trips on her iPhone and then moves on. So far our system has been this.
- Mac computer stationary at the office desk with iTunes for syncing phones and downloading apps, etc.
- Periodically rsync library to a Linux box and backup the Mac with Time Machine
Recently my wife decided she wanted to swap the Mac Mini that was there for a MacBook Pro that she could take to the couch. This way she could surf for TV shows and movies, make playlists, dock it, sync it up and go on.
There's one problem to this, though. If she buys a ton of TV shows and goes on long business trips (as she has recently), she can fill the entire MacBook Pro hard drive, thus rendering syncing impossible. We thought about each maintaining our own libraries, syncing these with each other using Home Sharing and backing them both up to the Linux box. This could work except we'd like to share playlists and those don't sync over Home Sharing.
Long story short we're trying to come up with a setup where she can still easily manipulate the machine that we'll sync with while also somehow giving that machine some breathing room. I haven't yet come up with an arrangement I'm happy with. Am I missing something?
Also, I have definitely considered taking the aforementioned Linux box and putting Windows on it, adding some RAM and using that as the main iTunes box. My experience with iTunes on Windows, however, is that it's very slow.

Just drag-copy the entire iTunes folder to the external drive.

I Need help for creating rules - very high values !!

Hi,
i have some troubleshooting by creating rules at HFM 11.1.1.3. I have declarate an array where some Data from an Account is stored. Then there should be stored one of the numerical data in another HFM account (f.e. "EB_MITTEL"). The stored data is much higher than the value in the log file ("write2File") showed. If i divide this value by 100000000000000 then the right value will be reported.
Example: Value in log-file: 16492,8691588785 ("," = decimal-delimiter)
Value in the Data-Grid: 164.928.691.588.785 ("." = thousands-separator)
Part of the rule-file:
Sub
     Dim lMittelWert, lMaxWert, lMinWert
     lMittelWert = 0
     lMaxWert = 0
     lMinWert = 0
     a = 0
     For x = 1 To 13
          If arListe(x) <> 0 then
          lMittelWert = lMittelWert + arListe(x)
          a=a+1
          End if
          If lMaxWert < arListe(x) Then
               lMaxWert = arListe(x)
          End If
          if x = 1 then
               lMinWert = arListe(x)
          End if
     Next
     lMinWert = lMaxWert
     For x = 1 To 13
          If lMinWert > arListe(x) and arListe(x) <> 0 Then
               lMinWert = arListe(x)
          End If
          write2file arListe(x)
     Next
     if a <> 0 Then
          lMittelWert = lMittelWert / a
     End if
     HS.Exp "A#EB_MITTEL.C1#" & C1Item & " = " & lMittelWert
     HS.Exp "A#EB_MIN.C1#" & C1Item & " = " & lMinWert
     HS.Exp "A#EB_MAX.C1#" & C1Item & " = " & lMaxWert
End Sub
I hope someone can help me, many thanks in advance. (and i am so sorry about my bad english)
Juergen

VB Scripts using String to number conversions in some languages require special consideration when handling numbers. (e.g. French, German and others that use commas as decimal delimiter).
Internally, HFM VB Scripts use periods (.) as the decimal delimiter. One workaround is to force the use of decimals and force the Scripting engine to use decimals by declaring the local to be English US with:
b = setLocale("en-us")

Workflow for creating a very large collage for a wall paper

Similar Messages

Maybe you are looking for