Workflow for parking FI document
Dear all
i have configured all the workflow configuration in IMG.
i park the document from user1
but when i want to post the document with user2
the workflow tab is avaiable in document but release check and post button are disable.
i am stuck here. please guide me what i am missing.
Dear mauri
Thanks for you reply.
but i could not find from where i realse the document..
i have the documentation which shows the document will post in sbwp for approval. but i could not find the document any of the user...
I have done the following configuration in SPRO
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of AP-Officer and assign user to this position.)
This is the issue
please guide me.
Edited by: Farhan Rashad on May 21, 2011 1:49 PM
Similar Messages
-
Triggering of Workflow for park documents based on Document type.
Hi,
I have activated workflow for park documents but it is triggering for all document types. Client dont want workflow for Customer park documents.
I assigned SA document only in "release approval path" but it is triggering for all document types.
Please help me.
Thanks.
AzeemHi Azeem,
We have the same requirement. Would you mind sharing how you were able to accomplish this?
Thank you,
Mark. -
Create workflow for parking document
hiiii all
can any one tell me in detail, what is the function of creation of work flow for parking document? and how do i configure? and how do i assign with user? please help
menu path :- financial accounting global settings - document - document parking - create workflow for parking document
regards
rajesh
Moderator: Please, search before posting. These are standard WF functionalities of SAP. If you have particular question about WF, please ask it on a proper forumHi,
Are there any special settings for SUBWORKFLOWS
There is no Special Setting for Sub Workflow.
Only error which i get in my inbox is
Please repair the suspended workflow
1) Once you get the Error, open a new session goto T.code SU53 and see any authorization issue
If Yes, send the screen shot to Basis Team to get the authorization.
2) If Authorization is fine, Check the binding for that Workitem Regenerate and Test it . Also Check the Workflow log and see which step error is showing, then see the Step history comments. .
Regards,
Surjith -
Workflow for parking documents
Hi all
Can any one explain me, wht is workflow and how to create?????
I need to creat workflow for parking documents??
It is urgent..
Thanks in advanceSilky,
Before putting up such a broad-bases query to this forum, try doing some homework. This (type of) query can't exactly be answered long distance!
Anyway, to get you started, I'd recommend SAP Help: http://help.sap.com/erp2005_ehp_01/helpdata/en/fd/517b42303e0e53e10000000a155106/frameset.htm
Second step - use Google!
Trust me, it works - always.
Best of Luck
Regards
Gulshan -
Std workflow for Parked Invoices?
hi guys
are there any std workflows for parked invoices? Our requirement is that once the Finance clerk creates a customer or vendor invoice he should only be able to park it and not post the invoice. Once the invoice is parked then the system should trigger a workflow and a notification neeeds to be sent to the approver to approve the invoice. Once it is done the finance clerk will post the invoice.
I switched on the event trace and did a trace on while creating a parked invoice. No event is triggered when the document is parked. If i post the document the event POSTED of object FIPP is triggerd. So since we dont have any std events raised when a document is parked is it possible to have a workflow?Hi,
The event FIPP.CREATED is raise via the customizing (SPRO)
Financial Accounting -> Financial Accounting global setting -> document -> document parking -> create workflow variant for parking documents.
Assign co.code to a workflow variant for parking documents.
Have a look at ws10000051.
Regards,
Ronit. -
Function Modules for Parking FI Documents
Hi Experts,
Which function modules are same as the T-Code F-65 for parking FI documents?
You will be rewarded if your tips is helpful.
Thanks and Regards
JoeHi Joe,
Check this,
https://forums.sdn.sap.com/click.jspa?searchID=5303620&messageID=806864
Thanks,
Reward If Helpful. -
Dear All
Is there any BAPI or Function Module available for parking the document in FI.
regards
Amit HiremathHi Armit,
have a look to this thread:
Re: BAPI for Parking non-PO Invoices?
regards Andreas -
FM/BAPI for Parking a document ( FBV1 )
Hi Experts,
We have a requirement where we need to POST a document & then Park It.
We are able to post a document using "BAPI_ACC_DOCUMENT_POST ".
But we are unable to find a FM/BAPI for Parking a document.
We cannot use BDC as the document type is not fixed. The transaction has different screens for each document type.
Any pointers to FM/BAPI or any other alternative solution to Park a document.
Thanks,
Best regards,
PrashantHi Prashant,
Refer the below link it will help u.
https://forums.sdn.sap.com/click.jspa?searchID=11002520&messageID=3632073
https://forums.sdn.sap.com/click.jspa?searchID=11002520&messageID=3475534
Regards
Kiran Sure -
Enabling workflow for parked documents in FICA
Please let me know if anyone used the standard workflow for approving parked documents before they can be posted. Please let me know the configuration and development steps needed to achieve this requirement as I could not find any kind of documentation around it.
Found the [documentation|http://help.sap.com/saphelp_47x200/helpdata/en/96/8b4e6943ce11d189ee0000e81ddfac/frameset.htm] in regular ERP documentation. I will follow the steps in this document and post a new question if I run into any issues. Closing this one.
-
Hello all,
I need to know the customising settings for workflow on parked document.how does the subworkflow attached to thw wf element(variant) get triggered in my main workflow for posting of parked document(i have modified teh std wf for parekd document i.e.ws0040004????I jst want to know ,how do i configure the subworkflow for release strategy(2 level release?).
Also how do i configure that the workflow shud be called at which point in my workflow?
Thanks,
Disha.Hi
Workflow variants created for document parking control whether the document release is active ant the minimum amount.
No documents are released if any company code is not assigned a workflow variant.
Please check if w/f vairant is assigned to company code..
RGDs
KIM Khan. -
Workflow for Parked Document (FV60)
Hi,
Can anyone tell me which workflow to be used for Parked Documents. The tcode is FV60. And I want to know what are all the settings have to be done in SPRO tcode. Can anyone provide me step by step procedure??
I think there are some 5 workflows : WS100000051,52,53,54,55.
I've to config for 6 Approvers. So which one can I use???Hello Gurus,
Do anyone know what are all the settings have to be done in SPRO tcode. I've done some settings in which work item goes to the users which i've assigned at the same time. I need it to go one by one approved....
I want to know whether I should use only one approval path ?
In Assign Release Approval Procedure for Parking Document, do i need to give only one entry or 6 entries as i'm using 6 approvals. And the amount column in that is total amount or the amount for single release??
can anyone help me out in this ??? -
Error in Workflow for Parked Document (FV60)
Hi Workflow Experts,
I have a FI document parking Workflow scenario which is 3 level release that is if the amount is upto 10000 first person will release if it's more than that upto 20000 then second user has to release ,if more than that then third user will post.
For this i have activated the main workflow WS10000051 and for two level release i have activated the sub workflows WS10000052 for first level release and WS10000053 for secondlevel release and WS10000054 for thirdlevel release.
I have also done the Release strategy configuration in SPRO such as
in the following SPRO steps
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of CEO created in HR to this)
Now when the document is parked it throws the error
Error in workflow Customizing for document parking (tranasction OBWE) and it stops in the step Determining Sub Workflow.
Has anyone come across this issue.Please guide me in resolving in this issue, i am not able to identify whether this error is happening in workflow or due to some missed entries in SPRO settings of FI.
So please provide me how to do settings in SPRO For Parking, mainly in Tcode OBWE.
Regards,
SagarHi,
Your question is exactly same as below.
[Re: Error in FI Document Parking Workflow;
Hope you 've gone thru this link already, if not, pl. go thru the above link. Also, give us more details on the error you see on the wflow log, like you are not getting any wflow template ID in the cont.element "&ACTIVITY_000043_TASK&", This should have either WS10000052, 53 or 54 depending on the Amt. level. See if you are getting any value here. If not, then there is somethign wrong in your OBWE settings.
Also, sometimes, even though this step of "Determe Subworkflow" step works fine, if there is no proper agent assignment, then also, it cannot create work item for next step of Sub wflow and hence will error out.
Pl .check the above. May be a detailed error message from wflow log would help us out in suggesting better.
Goodluck
venu -
Mnaual workflow for Park documents
Hi all of you,
Could any one please help me to customize the manual worlflow concept with 2 level releasing strategy for park documents. How it works, help me out.
Thanks & Regards
RamkiHi Ramki,
1. Create Workflow Variant for Parking Documents
a.Here create workflow variant and assign it to company code.
b. select posting release,minimum amount for workflow activation
c. Give subworkflow WS10000055
2.Define Release Approval Groups for Parking Documents
use standard or create u r own ( if u want to control certain vendor and customers)
3. Define Release Approval Paths for Parking Documents
use standard or create u r own
4. Assign Release Approval Paths for Parking Documents
5. Assign Release Approval Procedure for Parking Documents
a.Here give for level 1 workflow variant, maximum amt for release, levels 1, sub work flow WS10000052
b.Here give for level 1 workflow variant, maximum amt for release, levels 2, sub work flow WS10000053. Read help (F1).
6.Define Users with Release Authorization for Parking Documents
Here give workflow varinat, approval path, amount and assigned this line to Organization objects of HR and in this assign user id.
Regards,
Azeem -
(FI) BAPI for parking a document (FV50)
Hi,
Is there a BAPI to park a document using tcode FV50?
Thanks.
Regards,
Jackyuse fm BAPI_INCOMINGINVOICE_PARK
A. -
BTE for Parking a document and updating a custom table
Hi
I want to update a custom table whenever a new parking document got posted through FBV4. I want to use a BTE for this please advice....
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 10, 2011 9:15 AMHi Gaurav,
First time the correct data i have entered..and pressed "Save" button it is going and updating .After that i given same priority to multiple absence types..it errored out.. till now everything is fine.. Again i changed to correct value.. and pressed "Save" button. It is error out with an error like :
JBO-25001: Name LOCATOR_SELECT3 of object type View Row Set Iterator already exists
Code :
int rowCount = vo.getFetchedRowCount();
RowSetIterator rIter1 = vo.createRowSetIterator("LOCATOR_SELECT3");
rIter1.setRangeStart(0);
rIter1.setRangeSize(rowCount);
int g=0;
rIter1.reset();
for ( int i=0;i<rowCount;i++)
XxchrResultSetVORowImpl row = (XxchrResultSetVORowImpl)rIter1.getRowAtRangeIndex(i);
String priority = ((String)row.getAbsencePriority());
System.out.println("First Priority" + priority);
for ( int j=0;j<rowCount;j++)
if(i==j)
g++;
//leave this row
else
XxchrResultSetVORowImpl rows = (XxchrResultSetVORowImpl)rIter1.getRowAtRangeIndex(j);
String priority2 = ((String)rows.getAbsencePriority());
//String priority2 = ((String)row[j].getAttribute("AbsencePriority"));
System.out.println("Second Priority" + priority2);
if(priority.equals(priority2))
//that means priority is repeated
throw new OAException("error",OAException.ERROR);
rIter1.closeRowSetIterator();
Serializable[] param = {Businessgroupname,Retroactivedays};
am.invokeMethod("Apply");
Thanks
Preeti
Maybe you are looking for
-
Hi Friends, I have two pc with same configuration/OS/discoverer version . These two machines are on same network and accessing same database. On one pc report comes in 2 min. where as on other pc it takes more than 15 min. to execute. is there any di
-
How to play a cd with a .wave file?
I got a cd with a .wave file. I do not know how to play with itunes. can anyone help? I rarely use itunes. answers are very appreciated acb
-
Hi, What is the best possible way to process an IDoc (Message type: ORDERS/ORDCHG) in background in an Interactive report. Thanks in advance. Rgds, AK
-
I'm trying to filter a series of images based on a predefined attribute in an XML file. This works (partially): <div class="pic" spry:repeat="ds1"> <div spry:if="'{@class}' == 'pt'"> <img src="{@mainsrc}" class="{@class}" /> </div> </div> - only imag
-
IBooks Author won't open a .ibooks file?
I've been messing around creating a textbook, and saved the file to a folder on my hard drive. The extension of the file is .ibooks and I can see that the file is nearly 40 MB, so I know it's right (I put videos and pictures in it). But now when I go