Workflow for payment release doesn't block the FI Document by tnx MIRO

Hi Gurus, we are implementing the Workflows for all the Payable Accounts, we don't have problem with txn FB60, the documents posted are automatically blocked but with txn MIRO it doesn't happen.
In customizing I set the "RE" Class Document (Invoice Verification) like the KR (Vendor FI Invoice) to work in that workflow.
Is the same case for the txn PRRW (travel management) in Travel expenses for example.
I appreciate your help.
Regards.!!

HI,
How did you block payment for FB60? Is there any std BAPI available? Let me know because even i am in need of the same?
Regards,
Raj

Similar Messages

Workflow for payment release

Hello ,
I have done the configuration of workflow variant for payment release but the invoice with the payment block can be paid without any release approval .
Find below the configuration done for it . SPRO-Accounts Receivable and Payable-Business Transactions-Release for payment
1.t.code PPoce: Users is assigned to each position and this was assigned to approval path
2. Create workflow variant
subworkflowWS00400012
3.Assign Company code to workflow variant
4.Define Release Approval Groups for Release for Payment
5.Define Release Approval Paths for Release for Payment
6.Assign Release Approval Paths for Release for Payment
7.Assign Release Approval Procedure for Release for Payment
2010-2010-1000-inr-WS00400012-WS00400011
9.Define Users with Authorization to Payment Release
11.Define Payment Block Reason for Payment Release ( payment block P selected with a tick in Not changeable )
Then in the vendor master i have inputted the relase group also and the payment term which is having the block .
While executing f-02 , debiting the expense and crediting the vendor , I get the following error Line item not relevant for payment release for which i changed the message to warning and saved it . but when i executed f-53, it doesnt go for approval .
But in my inbox . the item is flowed with red colour and the erro log is
Error in workflow Customizing of payment release
Message no. FP162
Diagnosis
The system could not determine a subworkflow for the payment release. Check the workflow Customizing for the payment release, in particular the settings for transaction OBWE and the preceeding settings.
The message is output from the method SUBWFDETERMINE of the BOR object BSEG.
System Response
The workflow was started, but the system could not create an executable dialog workitem for the line item payment release. However, you cannot release the document directly, it must be released in the workflow. A subworkflow for the payment release must be determined in the sample workflow WS00400012; the clerks are determined in role 00400125.
Role 00400125 is based on the function module PR_WF_ACTOR1_DET.
Procedure
Change the payment release Customizing in Accounts Payable/Accounts Receivable Accounting. SAP delivers a sample subworkflow for payment release, WS00400011.
Procedure for System Administration
Restart the incorrect workflow (transaction SWPR) once you have maintained the Customizing for the payment release.
Kindly guide me . and let me know which setting i have missed .
thanks

Hi,
Have you tested those workflows separately? I can't even view WS00400012 in my ECC 6.0 system!
The workflows supplied by SAP are usually pretty bare-bones. More ofthen than not you have to copy them and fix them up.
You might be able to test them via SWUS or trigger them via SWUE.
If you create a new copy, remember to put that in the customizing.
hope this helps
Paul

Workflow variant for payment release

Hello ,
I have done the configuration of workflow variant for payment release but still the invoice is not getting blocked when we are paying it .
Find below the configuration done for it . SPRO-Accounts Receivable and Payable-Business Transactions-Release for payment
1.t.code PPoce: Users is assigned to each position and this was assigned to approval path
2. Create workflow variant
3.Assign Company code to workflow variant
4.Define Release Approval Groups for Release for Payment
5.Define Release Approval Paths for Release for Payment
6.Assign Release Approval Paths for Release for Payment
7.Assign Release Approval Procedure for Release for Payment
2010-2010-1000-inr-WS10000052-WS00400011
9.Define Users with Authorization to Payment Release
11.Define Payment Block Reason for Payment Release
Then in the vendor master i have inputted the relase group also .
But when i make the payment for that vendor , no blocking of invoice is happening nor it is going for approval procedure.
Please guide me what all other checklist available for executing the Workflow variant for payment release .
Thanks.

Thanks Kiran ,
Now hte invoice is getting blocked automatically and i am getting the error as
Line item not relevant for payment release
Message no. F5783
for which i changed the error message to warning mgs and saved the invoice .
But while making the payment i was not getting any payment block. I was able to make the payment
Actually I should get the payment block while I am making the payment and then i should release it through FB13 .
Please let me know if I am wrong .
Thanks

Line item not relevant for payment release

Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YL

Do you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks

Workflow for Payment proposal

Hi all,
Has anyone of you developed workflow approval process at the time of payment proposal generation? Is there a standard workflow available?
We want the payment proposal to trigger a workflow and send it to the manager for approval - this manager then posts the payment.
Please let me know if and how this can be done.
Thanks,
Mary

Hi,
I have exactly the same requirement. I need to trigger a workflow when the payment proposal is completed.
I've been searching for the answer on the internet. Several people have asked the same question, but I haven't seen any real answer to the question yet.
There is no standard SAP business object for payment proposal, there is one for payment request which uses F111. There is no standard workflow template, the one for payment release is only for releasing individual invoice. There are answers about restricting the authorisation, it helps, but it doesn't meet all requirements. We have people create payment proposals in UK for companies in Europe. We really need a workflow resolution. Seperating the authorisation will still require the person who created the proposal sending email to people in different countries to approve the payment.
Two technical problems that we are facing.
1. There is no existing business object. I've been told that we should should ABAP Class. And include the IF_WORKFLOW in the interface.
2. There is no event created when the payment proposal is completed. We are working on creating an event. I've been told to use SWE_EVENT_CREATE function module.
If you have more information about how this can be done, or if there is any easier way, please let me know. I will be very grateful.
Thanks,
Manlee

Error while assigning user for release approval path for payment release

Hi everyone,
     I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
The data in details below;
1. Create Workflow Variant for Release for Payment
   1000     SAP
2. Assign Company Code Workflow Variant for Release for Payment
1000     1000     SAP
3. Define Release Approval Groups for Release for Payment
0001     Vendor A
0002     vendor B
0003     Vendor C
0004     G/L accounts
4. Define Release Approval Paths for Release for Payment
0001     Vendor high
0002     Vendor middle
0003     Vendor low
0004     G/L accounts
0005     Other
5. Assign Release Approval Paths for Release for Payment
1000     KZ     0001     0001
1000     KZ     0002     0002
1000     KZ     0003     0003
6. Assign Release Approval Procedure for Release for Payment
1000     0001     20,000.00     KES     1     WS10000052     WS00400011
1000     0002     50,000.00     KES     2     WS10000052     WS00400021
1000     0003     1,000,000.00     KES     3     WS10000052     WS00400022
7. Define Relevant Document Types for Release for Payment
     1000     KR
1000     KZ
8. Define Users with Authorization to Payment Release
1000     0001     1     20,000.00     KES
1000     0001     2     50,000.00     KES
1000     0001     3     100,000.00     KES
here i have selected the option and tried to create Orgobject, i am getting following error
Program error: ASSIGN with length 0 in program "MP120800"
If any corrections in the definitions, Please let me know.
Thanks in advance!!

Hello,
Please start the report RSWOGIND, set also the checkbox "generate all
ObjTypes from new". This should solve the problem.
Best regards, Hana

Using work-flow for payment release

Dear Experts
I have a problem when using work-flow for payment release:
I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
when I test this work-flow it is running correctly via SWUS.
It would be very helpful if someone can help me with this problem.
Thanks and best regards,
Azam

http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
Regards,
PR.

Trigger Work Flow for payment release

hi guys,
kindly help me how to trigger the standard work flow for Payment release ((WS00400012).
With Regards
Pradeep N

enter the Workflow
in SWDD : WS00400012
click on Agent Assignment and assign the Approver USer ID.
click on the event linkage and activate and save.

Error in event receiver in workflow for PO release strategy

Hi Expert,
I am trying to trigger an email through workflow for PO release. I have setup following
In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
In PFTC, under Triggering events, Object type BUS2012 is green light
When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

laurarice wrote:
Hi Expert,
>
> I am trying to trigger an email through workflow for PO release. I have setup following
>
> In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
> In PFTC, under Triggering events, Object type BUS2012 is green light
> When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
> Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

Business Workflow for PR Release...

Hi Experts,
Can anybody please tell me how to work with BUSINESS WORKFLOW for PR Release from scratch.
I am new in Workflow and i had tried with myself but not getting exactly.
Please reply me with step-by-step process from scratch to release PR.
thanks in advance..

Where did you get stuck? All the steps needed could be found in the customizing and the customizing documentation explains them. Also make sure you have done the workflow configuration in SWU3.
Regards,
Martin

FM for Payment Release in FB03

Hello,
Does anyone know a FM that can be used to make payment release by FB03?
I need to make a change in payment WF, so that when you reach the stage of payment release, do not open the screen of the FB03.
Regards,
Balbino Soares

Hi,
Thanks for reply, but I look for a BAPI or FM to do Payment Release, but without using the fb03.
Regards,

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

When trying to upload a MS word file (.docx) to gmail, it uploads into a folder that doesn't contain the original document when i try to download it from e-mail. how do i solve this?

when trying to upload a MS word file (.docx) to gmail, it uploads as a 'folder' that doesn't contain the original document when i try to download it back from the e-mail. how do i set the format to simply upload the document itself??? Thanks...

Yes, excuse me. attach a file. I have separate folders on my desktop to organize my word documents, so I'm guessing this might be a part of the problem. When I go to attach one of these documents into gmail, the resulting attachment is another folder icon (not the original organizational folders) with 4 subfolders containing a slew of .xml files reading things like "header.xml" "format.xml" "settings.xml" "style.xml" "contenttype.xml" There are also a few .jpegs and a small folder reading "word" as one of the subfolders.

Work flow for payment release

Hi,
i hv configured payment release workflow for vendor payments, now the system is creating an auto block for invoices parked thru FB60. Now I desire to release the invoice for payment, so that my workflow gets triggered. But I dont know which Tcode to use to release the invoice for payment. If F110 can be used to relase the payment, kindly let me know how it is to be done. As I tried doing it but was not successfull.
Regards,
Krishna

Hi
If you have not assigned any agents to payment release task, then go to SAP Business workplace (ctrl+F12) and check in your inbox. You would have received an email through SAP workflow. Click on the email and it will direct you to release the invoice for payment.
Though you release the invoice it can not be paid unless you activate a task for "Reset Payment block"
You need to activate two tasks as below
Release for payment
and
Reset Payment block.
Once the invoice is released for payment then the status of BUS # changes to Released. You need to activate the task " Reset Payment block" with triggering event "Released".
Once the invoice is blocked for payment through workflow, the blcok can never be removed manually. This should be removed only through Workflow.

Workflow for Payment Request

Hello ,
Is there any standard workflow(s) for Payment Request Release procedure (T-Code : F871)?

Hi Anurag,
To search a workflow, go to t-code PFTC, select workflow template and give the workflow ID.
It would open the workflow template for you.
Also you can go to SWDD and enter the workflow ID. This would open the entire workflow and would display all the steps the workflow has in a graphical manner.
To find the workflow associated with Payment Request Release procedure (T-Code : F871), go to SWELS and activate the event trace. Now execute your transaction F871. Go to SWEL and see all the workflows triggered for Payment Request Release procedure (T-Code : F871) events. You can also find the workflow linkages in SWETYPV t-code.
Hope this helps!
Regards,
Saumya

Workflow for payment release doesn't block the FI Document by tnx MIRO

Similar Messages

Maybe you are looking for