Workflow For PO Creation

Hi,
I have configured the release strategy and assigned the agents accordingly in release strategy.
but when i create PO, Standard workflow WS20000275  for PO create is not triggered for event RELEASESTEPCREATED.
when i check the event trace this event is not displayed for BUS2012.
Thanks,
Ps
Edited by: Naveen P.S on Sep 30, 2011 7:30 AM

Hi ,
Release strategy has been configured correctly in SPRO, release strategy & release codes are being updated correctly in PO document.
I have switched on the trace as well.
when i create PO and check the event trace there is no event with BUS2012, instead i found a entry as below,
FREBUS2012    ->Event created-> Handler/Action: message says No receiver entered.
Thanks,
PS

Similar Messages

  • Workflow for Vendor Creation through a portal.

    Hi All Workflow Experts,
                                         I have a scenario here.In my project  vendor is created through a portal.On submit button from portal the workflow is to be triggered.I have to design the workflow process.So can you please guide me through what all should i consider while i design this workflow?
    This is my first workflow assignment so if you explain in detail it will be a great help.
    I will just pen down what all scenarios i can think of:
    1.Start workflow after vendor creation or modification.
    2.Check whether approver are maintained in Org structure through  standard FMu2019s.
    3.Check If approvers are maintained ?
    4.If yes,approve or reject the vendor.
    5.If no,get the agents from the custom table who can take an action on this.
    This is what i can think of.
    Please guide me.
    Thanks in Advance,
    Saket.

    The corresponding BO related with the vendor creation or changing is LFA1 but this Business object doeanot have any events that are related to Create and Change , so try to create a ZLFA1 and add you own events or make use of delegation concept where you will create a delegation for LFA1.
    For your first isssue
    Start workflow after vendor creation or modification
    EXIT_SAPMF02K_001 Vendors: User Exit for Checks prior to Saving is the user exit where in you can call the workflow when ever you change or create , because this user exit will trigger when ever you try to save the vendor. so i think you can make use of this user exit
    For your second Issue
    Check whether approver are maintained in Org structure through standard FMu2019s.
    Make use of SWI_GET_USERS_OF_ORG_UNIT this fucntion mdoule to get the user of the ORG unit
    or you can create a Rule(for determining the agents dynamically) to find the approvers.

  • Workflow for User Creation

    Hi
    I would like to implement the Work Flow for User Creation, i.e.whenever the admin creates the user id, it should go to manager for approval and after that it pwd should be delivered to the respective user.
    Can any one guide me on how to implement the same. Also I would like to know the use of customisation under Set Approval Indicator in IMG settings.
    Suitable points will be awarded.
    Regards,
    PKM

    Hi,
      Pls refer the foll link:
    http://help.sap.com/saphelp_srm40/helpdata/en/5a/af5f0b85d011d2b42d006094b92d37/content.htm
    BR,
    Disha.
    Pls reward points for useful answers.

  • Workflow For material Creation

    Requriment is that   :   After creation of Material by End User   Workflow Should  be Triggered and   Internal Mail Should be  goes into the Superwiser Inbox (i.e   in SWBP   )  only Superwiser can see whos has created the Material  .........
    So if Anybody having the Steps for this Senario  then Give me the  Link
    Regrads,
    Sandeep

    thanks Sharath   but this  not    problem which i am facing  ,  my problem is that   ,
    enduser  :  Who is  creating Material   after creation of  material his  Role is finished  .  Now  the Workflow is Triggered 
    superwiser   :         As soon as Worklfow is Triggered   Mail  comes to his  Inbox  Like  "  Material is created  by   abc  ( end user )  .
    I have develoed  the workflow  but   the things is that    after creation the  material   i myself  geting the  mail in my  INBOX  that "  material is created " but fact is that that mail should goes to superwiser  and this is not happened    ?
    I thing   their is problem with agent assignment .  i also try lot's of things  but  still my Problem  is not solved   if you have any  screen shotes of  Real time Senario then please guide me
    regrads,
    Sandeep

  • Create an Approval Workflow for User Creation in AD

    Hi
    Anyone, tell me how to create an approval workflow to create users into AD. For example, before provisioning user into AD resouce the request should go to the Manager of the user for approval.
    P.S: I am using OIM 9.1
    Thanks
    Sireesha

    Hi Sireesha
    You want to create a new Process definition, selecting "Approval" as the process type.
    Then associate it with the AD User Resource Object. Add a "Manager Approval" process task and use a Task Assignment Adapter to to assign the task to the manager of the request target.
    In order for the Approval Process to fire, you need to ensure that you provision the AD User Resource Object via a Request, rather than directly.
    HTH
    Cheers
    Rob

  • UWL Workflow for Purchase creation and Requisition

    Hello Friends,
    Could you please help me on the following UWL configuration scenario?
    1. Workflow process for purchase requisitions (create purchase requisition ME51N)
    2. Workflow process for purchase orders (create purchase order ME21N)
    For the above scenario, what need to be done in portal. I already established SSO, and other connectivity between portal 7.0 and SAP System.
    For the above scenarios do we need to import any package into portal...like business packages?
    Or will it work in UWL automatically? (I am not sure about this line...I am new to UWL)
    Please help me on this.
    Thanks,
    Vasanth

    Hi
    U need to register the system with portal
    Registering the SAP ECC system that will provide work items to UWL. For example, registering the system on which Business Workflow runs
    Each SAP system that will provide work items must be registered as follows.
    1.Navigate to System Administration  System Configuration  Universal Worklist and Workflow  Universal Worklist - Administration.
    2.Choose the New button.
    3.In the dialog box:
    In System Alias, enter the system alias.
    In Connector Type, select WebFlowConnector.
    4.Choose Save to store the current configuration object.
    Register Work Item Types:
    The work item registration process involves identifying each system by its alias, and then generating the XML description of how to process the work item types to be received by UWL from each system.
    1.Choose System Administration  System Configuration  Universal Worklist & Workflow  Universal WorkList - Administration. The system displays the iView titled Registration for item types of Universal Worklist Webflow. The system displays a list of system aliases for which the work item types are not yet registered.
    2.Select Register Item Types for New Systems Only button.
    Register Item Types for All Systems button is selected to perform the registration for all configured systems. Register Item Types for New Systems Only button is selected to perform registration for systems whose XML processing description has not been downloaded before.
    Regards
    Krishna.

  • How to Debugg workflow for Article Creation using MM41 In IS Retails System

    Existing system they are using business BUS1001006,Event Created for triggering workflow when you create article using transaction code MM41.
    I could see one more business object named ZBUS100106 for triggering workflow when you Create an article.
    I just want to debugg the workflow to add some additional validations to trigger workflow when i can create article using transaction code MM41.
    Let me know how to debugg the workflow.
    Thanks in Advance.

    ZBUS100106 is nothing but Custom Business Object of BUS100106 creating by extending BUS100106.
    You can debug Business Object code thru putting breakpoint in Code and executing the Business Object thru SWO1.
    For your requirement you could possibly use SWB_COND Tcode so as to limit workflow lanches.
    Refer [this|http://mailman.mit.edu/pipermail/sap-wug/2003-November/011005.html].
    Regards
    Shital

  • Approval workflow for creation of organization

    Hi,
    I need to configure an approval workflow for the creation of organization. When the admin tries to create a new org, the approval should go to a admin group. The org should get created only once approval is done. I have configured an approval workflow for the Xellerate Organization resource object. I have created an unconditional task where the assignment tab has the admin group. When I test it, the org gets created without going through the approval process. Could someone please tell me what am I missing?
    Thanks,
    Supreetha
    Edited by: Supreetha on Jan 22, 2011 8:38 AM

    You'll have to raise request for Dummy Organization. It's Order for Organization so will not appear for user.
    I am not sure the full flow/complete requirement of your.
    APMU, you want approval while creating Organization into OIM.
    This is not possible OOTb when you create ORg in OIM.
    You'll create 1 dummy Org
    1 Dummy RO "OFO".
    Attach one Object Form with this RO.
    Raise request for Dummy Org and Give the name of Org on the object form for which you want approval.
    In the provisioning workflow, use OIM API to create Org into OIM.
    Done !!!

  • Workflow for Purchase order creation!!!

    Hi,
    I am new for SAP Workflow. I have a requirement to create workflow for PO creation. Once the approval of 2 levels, then PO should be released. Could you please help me to do this. Please provice me the step by step procedure or relevent materials links.
    Thanks in Advance!!

    Hi,
    Get yourself familiar with terms like PO release strategy, etc. This has lots of material in SAP help. You might also take a look to SAP MM workflow scenarions document - it has documentation of PR release, but the idea is quite similar with POs.
    You can also google "PO release strategy in SAP", and you should find some step by step instructions.
    In general, lots of things can be done purely by configuring in SPRO and not that much WF development (if any) is required unless you have some specific requiremenets.
    Regards,
    Karri

  • Workflow for BO BUS1001006 not retreiving plantu2666

    Hi Experts,
    I have activated a workflow for material creation using BO BUS1001006 .
    It works fine , but the problem is it does not give me the plant details.
    My requirement is that i have to send the plant of the material created /changed.
    hope you offer quick solutions.
    <THREAD LOCKED. Duplicate of [Workflow for BO BUS1001006 not retreiving plant]. Please do not duplicate posts, read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further info>
    Edited by: Mike Pokraka on Jan 28, 2009 7:33 AM

    Hi Martina,
    If you have done that then you are almost on the verge of completion!
    Follow this binding procedure between the task container and the method container and get the results.
    In the BO method, add an output parameter that would store the plant detail.
    Now create a data element in the method code of the same type as plant detail type.
    Then use swc_set_element to store the value of the plant detail in the output parameter.
    In the workflow task, create an output parameter of the same type as the BO method output parameter.
    In the binding between the task container and the method container fetch the value of plant details from method container to task container element.
    Now pass this parameter to the workflow container and use in the send mail step in the mail text.
    Make sure to save and generate the BO after doing all the changes.
    Regards,
    Saumya

  • Key performance indicators (KPI) for material creation

    Dear all,
    I need to define some Key Performance Indicators (KPI’s) to measure the data quality during the material creation (MM01) process. The objective is to get concrete statistics about data quality/accuracy for fields related to material from all views created with MM01 (basic data, classification, unit of measure...).
    I would like to get your expertise on how to measure these KPI’s : which transactions, table (...) to use ?
    I have already few ideas :
    -Table CDHDR
    -Transaction MM04
    -Create “checkpoints“ into the workflow for material creation (ZWF01)
    Do you have any other idea in mind?
    I am open for all advices: transaction, table, process, approach…
    Thanks in advance for your help !

    I have a few ideas, but the accuracy of the master data is based on your system config.
    Some things that are helpful in most of the cases:
    - If material type is HAWA (trading goods) your procurement indicator should always be External procurement (check those for other material types if you have it uniformed). You can also check purchasing group based on material type if you have it distinct by material type.
    - Check if sales views are opened in all org.levels
    - Check if storage loc.views are opened for all SLoc
    All in all, you need to have a link of two or more data in material master to be able to check it in some way automatically, otherwise you won't be able to determine if the data is correct or not.
    E.g. How would you every know if lot size of 120.000 PCS is OK or not for a specific material or if you need to assign a specific purchasing group to your material.
    You know the logic behind your material master data best so you can create the best rules to check for your KPI.
    Regards.

  • Workflow for BO BUS1001006 not retreiving plant

    Hi Experts,
    I have activated a workflow for material creation using BO BUS1001006 .
    It works fine , but the problem is it does not give me the plant details.
    My requirement is that i have to send the plant of the material created /changed.
    from which field of bus1001006 can i get it  ?
    hope you offer quick solutions.

    Hi Martina,
    If you have done that then you are almost on the verge of completion!
    Follow this binding procedure between the task container and the method container and get the results.
    In the BO method, add an output parameter that would store the plant detail.
    Now create a data element in the method code of the same type as plant detail type.
    Then use swc_set_element to store the value of the plant detail in the output parameter.
    In the workflow task, create an output parameter of the same type as the BO method output parameter.
    In the binding between the task container and the method container fetch the value of plant details from method container to task container element.
    Now pass this parameter to the workflow container and use in the send mail step in the mail text.
    Make sure to save and generate the BO after doing all the changes.
    Regards,
    Saumya

  • Trigger workflow for MIRO invoice creation

    Hello,
    In standard functionning it is not possible to trigger the workflow for documents coming from MM.
    When using transaction MIRO and selecting invoice creation the created document has following value :
    BKPF-AWTYP = 'RMRP'. whereas creating it from FB60 results to BKPF-AWTYP = 'BKPF'.
    The problem is standard code checks AWTYP is not equal to 'RMRP' before creating event to start the standard workflow for invoice validation.
    Question : why sap doesn't allow workflow creation for invoices from MIRO?
    Thanks for your answers.
    Best regards,
    Laurent.

    Hi,
    here they are...
    WS20000397 MMIVBlockedP Treatment of inv. blkd for price, Log.IV
    WS20001004 MMIVToRel Release the Completed Log. IV Document
    WS00400026 MMIVquantity Treatment inv.blocked f.quantity reasons
    WS20001003 MMIVToCompl Complete the Parked Log. IV Document
    WS00400027 MMIVprice Treatment invoic.blocked f.price reasons
    All of these workflows are a one-step / one-level of approval and needs some workflow configuration at least for the agent assignments. For a full-blown workflow you should take these workflows as an example, how you could work with it.
    The last two workflows work with preliminary posting on the miro (transaction MIR7).
    Best regards,
    Florin

  • Path and Name field in SPD 2010 Workflow for creating Doc Sets

    Hi Guys,
    Here's hoping you can help out and give a few pointers. I'm currently trying to implement what I thought was quite a simple workflow involving the creation of a Content Type (similar to Doc Set but with additional field) within an alternative library when
    a new item is added to the current library.
    Create Item in CaseFileLibrary (Output to Variable: CaseFile)
    When running the workflow, I keep getting the following error:
    "The workflow could not create the list item because the file name is either missing or invalid. "
    It seems to be related to the 'File and Path' field within the 'Create New List Item' field mappings. For this I have tried the CurrentItem:Title as some other forums suggest and have also tried entering the URL path e.g. /subsite_name/library_name/CurrentItem:Title.
    (as the name of the CaseFile (Doc Set) is going to be the same as the current item name)
    If anyone has any suggestions, I would be truely greatful.
    Luke

    Hi Luke,
    This error indicates there is an error in the workflow logic. Ensure that the file name entered in the Path and Name field is a valid file name. Common reasons for a file name to be invalid include a missing or incorrect file extension or a file/path string
    that is too long and exceeds the allowable number of characters.
    More information, please refer to :
    Common error messages in SharePoint workflow development
    For the URL that you used in the ‘Create New List Item’, whether the CurrentItem:Title is a lookup, not typed by yourself. If not, please type /subsite_name/library_name/, then lookup CurrentItem:Title, like the below, then save and publish the workflow,
    compare the result.
    In addition, please use another name for the name, compare the result.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Help using workflow for import manager

    hi all,
    assumes import server is used for automation creation/update of records,
    i need to design a workflow to verify existing record  that:
    if a validation pass: update all fields + update mapping key
    if a validation fail : update mapping key only
    can anyone provide good suggestion on how it can be done via workflow?
    MDM API is out of scope...
    thanks,
    Shanti

    Hello Shanti
    Import manager and import server  launch workflow after data loading is finished.
    You cannot manage loading rules from workflow.
    You can create two inbound ports:
    one for keys loading
    another one for keys+fileds loading
    Regards
    Kanstantsin Chernichenka

Maybe you are looking for