Workflow getting triggered when added/replace in Mask

Hi Experts,
We are using MDM 7.1 SP09 and we are facing an issue of workflow getting triggered when records are added or replaced in Mask..
ie whenever i am adding or replacing some records in mask workflow is triggered for most of the records ....IF i check the Workflow tab it will show all the steps maintained for that particular Workflow adn then gets deleted automatically...and strange thing is it is happening to a single user id/role and for other role this does not happen
Can anyone please help me sorting out this issue..
Regards
Nitin

Hi Ravi,
Today again I checked the scenario once again in production with both user/role and found that workflow is triggered for both users...
Also I tested in Test environment and issue is same..
I checked the Perf Tracing and found the below. Please let me know if these are triggered because of some Java...

Similar Messages

How does a workflow get triggered when we create a Shopping cart

Hi all,
In SRm how does a workflow gets triggered when we create a Shopping cart...what i mean is that in r/3 we use changedocument object or function modules etc..likewise in srm how the wf gets triggere...can anyone help me.
Thanks&Regards,
Hari

Hi martin,
yes i accept that in SRM also workflows are all started by event...what i mean is in R/3 we go for Change document object(swec) or some other method for event creation...like that in SRM what is there?Just whenwe create a Shopping cart How the workflow is trigerred...suppose if it is trigerred using fm swe_event_create where they might have called the function module.
Thanks&Regards,
Hari

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

Workitem button is not comming in swel though the workflow gets triggered

Dear All,
I have copied the std wf WS20000075 and doing customization for po release as per my clients requirement. Once PO is being created in ME21N i am able to see the event trace in SWEL , but its showing an error , " Import container contains errors (are any obligatory elements missing? " .and no workitem button is comming in SWEL so that i am not able to see the workflow log .
so that though the workflow gets triggered , i am not able to trace it .
I have gone through the solutions given in sdn , but i didn't get any solution for my issue.
Hope to get a positive solution for this soon.
Thanks
prabhudutta

This is error in ECC 6.0 for BUS2012.
For the time being I am using solution which I have given in this thread but rigid solution is to raise an OSS note.
I myself will raise an OSS but before would like to debug and find out what it is expecting exactly so i said use SWUE to find what went wrong.
Cheers
Jai
I am having the same error, it goes into error for ECC6.0 version. I have not got chance to see why it is happening?
any way for the time being you can do this : go to SWE2 and for given business object and receiver type, change the settings of "Behaviour upon error feedback" from "default" to "do not change linkage" so every time atleast event will trigger and so workflow, yeah ofcourse event will be queued in SWEAD. So final solution is an OSS
NOTE:
Check this thread, Glauco has given OSS note 797775
/thread/781604 [original link is broken]

Does IDoc get triggered when GR occured for a particular po

Hi Friends,
Say a GR occured for a particular PO,so i want to track this GR in Action Code that GR has occuredand no other details is needed except that.
so,my question is "Does IDoc get triggered when GR has occured for a particular Purchase Order".
If so can u explain me the process, how to track?
Thanks in Advance,
Meghna.

Hi,
If u want to know that IDOC has been triggered then u have to do ALE setting then u can know that idoc has triggered in WE02 transaction.
Other than that if u want to know that PO has been there in GR then for Create CO01,CO02,CO03 for GR details.
the IDOC for GR is MBGMCR.MBGMCR02.
Regards,
Phani
Reward pOints if Helpful

Preview of approval chain before workflow gets triggered

Hi Guys,
I have a different requirement where users want to see the preview of approval chain before workflow gets triggered. I mean once we enter all the data in transaction, after the data validation is done then they want to see the approval chain. What is the best way to achieve this functionality. your input/ideas are highly appreciated.
Thanks
VT

There is no easy way to do this. Basically the only possibility is to enhance your transaction with a subscreen or a tab where you have to simulate the logic used in your workflow to find agents and show the result of that simulation.
If you are in a homemade transaction it should be pretty easy to do. If you're in a SAP standard transaction it may become a really tough modification/enhancement.
Cheers,
Patrick

Workflow getting triggered many times

Hi all ,
I m working on Travel management workflows. I have set the triggering event as BUS2089->Created . But Whenever I m saving a travel request , it is triggering the workflow which is not desired .
How can this be rectified ???
Thanks ,
Sonu.

See,
I analysed the problem earlier.
I switched on the EVENT TRACE and ran one TRIP CREATION cycle. I can find that BUS2089 - REQUESTCREATED event is triggered. Well, as per our scenario, I changed that Created Trip, and I can still find the BUS2089 - REQUESTCREATED event even for this action also.
And If I am not wrong this workflow gets triggered for BUS2089 - REQUESTCREATED event(refer your Trip WF Basic Data-Start Events).
So, to avoid this problem, I have used a USER EXIT for TRIP to trigger my WF manually.
Please refer the enhancement FITR0003 for the TRIP Userexit.
I hope this should clear your problem as myn.
Regards,
Raja Sekhar

What is the Transaction/Program which gets triggered when file

What is the Transaction or Program which gets triggered when file has been placed on application server to generate the Inbound IDoc from the same.
Please let me know the procedure to automate the process of generating Inbound IDoc when the file has been placed in application server path...
Thanks for your reply ....
regards,
G.Reddy

hi
MASTER_IDOC_DISTRIBUTE fm is used to create a IDOC for outbound & for inbound
try this
you can use master_ale_distribute function module to create the idoc.but before that you need to populate two internal table to pass in to this function module.
1.it_edidc = this internal table tells the port,partner profile etc.this internal table having the same structure of edidc table
2,second you create the internal table conatains the data records.this table got the the structure of edid4.
3.populate these two internal table and pass this to this function module
4.you can populate the second internal table from your flat file by writing some upload program
FORM master_ale_distribute .
*PERFORM get_mestype.
wa_edidc-mestyp = wrk_mestyp.
wa_edidc-idoctp = wrk_idoctyp.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
    master_idoc_control                  = wa_edidc
OBJ_TYPE                             = ''
CHNUM                                = ''
TABLES
    communication_idoc_control           = it_edidc
    master_idoc_data                     = it_idoc_data.
IF sy-subrc 0.
ELSE.
    READ TABLE it_edidc INTO wa_edidc INDEX 1.
    IF sy-subrc = 0.
      MESSAGE s006(msg) WITH wa_edidc-docnum.
      PERFORM modify_idocnum.
    ENDIF.
ENDIF.
ENDFORM.
Regards

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

Workflow not triggering when changing Item-level Permissions in Sharepoint 2013 list

Scenario:
We have a custom list in Sharepoint 2013 that we use for Case Management. We have a workflow that triggers on a created item generated from an email. The user then gets a reply with a link to his own case.
I want the users only to be able to see their own cases and no one elses. When I change this under
Advanced Settings under List Settings and
Item-level Permissions and set them to Read items that were created by the user
and Create items and edit items that were created by the user
the workflow doesn´t trigger.
How can I resolve this? I've tried every possible out-of-the-box permissions but with no result. Help!
Thanks in advance!
// Browncreek

When you're testing , remember you cant trigger declarative workflow from the System Account - you need a general user account for auto-trigger workflows. Good luck!
Chris McNulty MCSE/MCTS/MSA/MVTSP | blog http://www.chrismcnulty.net/blog | twitter @cmcnulty2000 Microsoft Community Contributor Award 2011
Hi, I have the same problem. Except that I am not using an email to create a new item. The item is created by members of a SharePoint group that have Contribute access to the list. When use the same settings i.e.
Read items that were created by the user and Create items and edit items that were created by the user,
the workflow does not trigger. If I set it back to Real all items and Create
and Edit all items, it triggers the workflow.
Please help me resolve as I have rolled this out to pilot users and am having this trouble.
Thanks,
Vishal

Task Does not get triggered when User is created through API

Hi,
Each new user in our OIM environment is supposed to have a iPlanet account. I have configured the access policy for the same and it works.There is also a process task which needs to be triggered once the user is successfully created in the DS. Following is my issue:
1.When the new user is created through the admin console, the user is provisioned successfully to DS as well because of the access policy and the task also gets triggered successfully.
2. There is an approval workflow for another resource, at the end of which a user needs to be created through APIs in OIM. The user gets created successfully in OIM and also get provisionined to DS just like in the above use case. However, the task fails in this case. I see that the task is being triggered from the user's resource profile, but the status is rejected.
Can someone please tell me why is this happening. I initially though there was some issue with my adapter for the task, but in case 1 it works just fine.
Following is the exception I get as soon as the iPlanet connector finishes creating the user in DS:
java.lang.ClassCastException: java.lang.String
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETFIELDSONUSERCREATE.implementation(adpSETFIELDSONUSERCREATE.java:51)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
Thanks,
Supreetha

Hi,
Have you checked the process data that you are passing to this adapter and check the mapping of process data to the adapter variable. Try to log the value which you get from process data. I got this error when I was trying to use the literal value from process data as "true" for a boolean value. This is a bug. This value is not actually a boolean value. It threw me error too sometimes back. Either you pass the boolean value from adaptor factory as a literal value or change the type boolean both in your code and the adapter.
OIM works strangely. ;) All the best,
Manila

Workflow not triggered when i have changed the PO

Hi,
We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items.
we have custom workflow evernt (changed) to update the items if user change in header. But the issue is if user changes the items and save the po, it is not updating immediatly. after we come back to Purcahse Order and save the purcahse order again then it updates the table.
Is there any reason why the event is not triggered when the PO was changed initially.

Hello,
"We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items. "
If you update a price in the header, how/why would that be distributed to the items? Is this a total price of the whole PO? Why not just have it in the header?
"we have custom workflow evernt (changed) to update the items if user change in header."
OK. Strange, but OK.
"But the issue is if user changes the items and save the po, it is not updating immediatly"
I thought it was supposed to happen when the users changed the header, not the items.
If you really have a workflow to update the items when the header is changed, then maybe it's not succeeding if the PO items are locked, eg by having them on your screen. Did the worklow actually start? Any error messages?
rgards
Rick Bakker
hanabi technology

Workflow not triggered when called within a Dynamic Trigger of HRMS

Hello,
Requeirment :Whenever any data is updated withing the People workbench of HRMS, a notification should be sent with the following message:
Employee Number <Empno> has modified emailid from <old> to <new>.
To achieve the same a dynamic trigger has been written on per_all_people_f table
invoking a procedure with the below script:
if(nvl(P_old_MS_Value,' ')<>nvl(P_New_MS_Value,' ')) then
 insert into log_self values(P_old_MS_Value,P_new_MS_Value,l_itemkey,p_employeename);
 wf_engine.CreateProcess ( itemtype => 'HRSSA',
itemkey => l_itemkey,
process => 'IRHR_SELFSERVICE_CHANGE_PRC');
insert into log_not values('After Create Process');
 wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'CURRENT_PERSON_DISPLAY_NAME',
avalue => p_employeename);
insert into log_not values('After CURRENT_PERSON_DISPLAY_NAME');
wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'IRHR_OLD_VALUE',
avalue => P_Old_MS_Value);
insert into log_not values('After IRHR_OLD_VALUE');
wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'IRHR_NEW_VALUE',
avalue => P_New_MS_Value);
insert into log_not values('After IRHR_NEW_VALUE');
wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'IRHR_ATTRIBUTE_THAT_CHANGED',
avalue => 'Marital Status');
insert into log_not values('After IRHR_ATTRIBUTE_THAT_CHANGED');
 wf_engine.SetItemAttrNumber ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'FORWARD_TO_PERSON_ID',
 avalue => 572366);
 insert into log_not values('After FORWARD_TO_PERSON_ID');
 -- set the current forward to person username attribute
 wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'FORWARD_TO_USERNAME',
 avalue => 'CHRISTOPHERHARRIS');
 insert into log_not values('After FORWARD_TO_USERNAME');
 -- set the current forward to display name attribute
 wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
 itemkey => l_itemkey,
 aname => 'FORWARD_TO_DISPLAY_NAME',
avalue => 'Harris, Christopher');
insert into log_not values('After FORWARD_TO_DISPLAY_NAME');
 --insert into log_self values('Before Start Process');
--commit;
 wf_engine.startprocess(itemtype=> 'HRSSA', itemkey => l_itemkey);
 insert into log_not values('After startprocess');
However we find the workflow process not getting triggered. The same however happens when the script is executed sepreately and a commit is given after the Start process. Is there a way i can invoke in dynamic trigger as the dynamic trigger prohibits use of Commit.?
Pls help ASAP.
Thanks & Regards,
Gayatri Jayaraman

Hi,
The Object key which you passing to trigger is not correct. Give the full key preceded with Zero.
Regards,
Surjith

Output fax not getting triggered when sales order credit block is released

Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PM

Hi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1                                                                    Order 2*
1. ZFAX                                                                   1.   ZFAX
    10(Z010)                                                                 10(Z010)
       0000122426                                                              0000122427
2. ZFAX                                                                   2.   ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM

WorkFlow get triggered even if we set trigger for item update with SPEmailEventReceiver and workflow attached to same Library

Hi All,
I have a situation, SPEmailEventReceiver and WorkFlow is attached to same library, WorkFlow is configured to run after item is updated, but soon as the email is received in library the workflow
is getting triggered, We have a action to create folder with subject and date and put the attachment with the date folder in SPEmailEventReceiver e.g: once a mail is received in library the SPEmailEventReceiver will create a folder with Subject and then Folder
with Date and then put the attachment in the date folder so hierarchy will be subject folder/Date folder/attachment
I have tried to alter the SquenceNumber attribute in Feature Element file to 1 and make the Synchronization as synchronous but no luck.

Hi,
Here are some articles for your reference:
Programmatically creating Folders within SharePoint List
http://www.mindfiresolutions.com/Programmatically-creating-Folders-within-SharePoint-List-487.php
How to use SPEmailEventReceiver?
http://kkryczka.wordpress.com/2010/11/05/how-to-use-spemaileventreceiver/
Attachments disappear with custom email event handler
http://blogs.msdn.com/b/malag/archive/2009/05/13/attachments-disappear-with-custom-email-event-handler.aspx?PageIndex=2
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Workflow getting triggered when added/replace in Mask

Similar Messages

Maybe you are looking for