Workflow Help! HD, SD same sequence??

Hi guys,
i have a project for with a number of types of footage. HD Prores, DV PAL, stills, etc.
|My question, can i do the edit on a 1920 X 1080 dvpal timeline, and then before export change it to prores, re-render and export??. will i lose any quality? or should i cut it all in a prores sequence. just render times are very long for the comps, filters im using etc.
any workflow help would be awesome!!
cheers

can i do the edit on a 1920 X 1080 dvpal timeline and then before export change it to prores, re-render and export??
No. DV is not 1920x1080. It is 720x576.
will i lose any quality?
Yes...if you use those settings. Well, if FCP even lets you.
or should i cut it all in a prores sequence
Yes....cut in a ProRes sequence.
Shane

Similar Messages

How to make use of the results of one step at the other step in the same sequence

Hello
I am new to the Teststand.
I am using labview8.0 with teststand 3.1
Plz get me solution for the below
I am configuring the serial port resources like resource name, baud rate etc..,I made the initialization using setup task.I made serial port write and serial port read as independant vi's in labview and called them from teststand as steps.Now i need the same resource name appear in some other steps in the sequence .how can i get them using teststand commands instead of specfying them at each step.
Also how to pass values or results obtained from one step to some other step in the same sequence using teststand commands.
Also help me in parameter passing
Regards
Kiran

Hi Kiran,
I wrote some example code that demonstrates what you are trying to do. The sequence file relies on a local variable named visa_resource of type LabVIEWIOControl.
Regards,
Attachments:
test.zip ‏11 KB

Why does Premiere render the same sequence sometimes fast and sometimes really slow?

I use Premiere Pro CC 2014.
I have a Nvidia GTX 590
Intel Core i7 X990 @ 3.47GHz
24GB RAM
Windows 7 (64)
200GB free space on an SSD drive and 2 more drives with each 1TB free.
I'm having trouble with performance when rendering sequences.
The sequences themselves are pretty simple. They contain MOV files from my Canon EOS 5D Mark III and transparent PNG files as overlays for titles and additional graphics.
I also use lumetri looks and have turned on Cuda rendering. As a codec for exporting I use H264 (fullhd, 25fps, 20mbits, 2pass, max render quality, max depth)
Whether or not I export in Premiere or via AME doesn't matter, the problem stays the same.
Now, when I start exporting, at one point, which is seemingly random (sometimes at 35%, sometimes at 60%, sometimes at 2% - I'm talking about the same sequence!) rendering becomes really really slow (~1 hour for a 3min video), and I don't understand why. I keeps slow until the whole sequence is finished. But before that, rendering was fast!
But sometimes, I'm lucky, and - after restarting my computer and Premiere, the same sequences render in whole, in under 2 minutes!
So obviously my computer is able to render fast. But it does not always do that. Sometimes - even after a fresh reboot, I'm out of luck and the same sequence renders in an hour - but only after a random point in the sequence.
It's as if Premiere stumbles and can't get up again. The only thing that CAN help (though does not alway), is rebooting the system and hoping for the best.
Where does this strange behaviour come from? I use ordinary footage, ordinary filters and an ordinary export codec. I have lots of RAM and lots of disk space
I have not found a topic in this forum with a similar problem

Similar problem here but on a Mac. AME is always much slower than directly exporting from Premiere, but if I start to get slow renders a reboot always sorts the issue out.

A workflow is sending the same email notification twice

A workflow is sending the same email notification twice. Not every notification, but this happening only a few times randomly. The double sent emails are arriving together , have the same date and time.
I've checked the workflow and found that there is no double sending command in the workflow, and the workflow history also shows just 1 run and 1 email sending.
Can somebody help me on this.

Hi Neel,
For troubleshooting your issue, you can take steps as below:
1.Increasing the UserDefinedWorkflowMaximumComplexity to 30000 setting using Powershell script
2.IISRESET
3.Adding <httpRuntime maxRequestLength="51200" executionTimeout="3600" /> in web.config. Yes, that is "3600" unlike "300" suggested. Please note that there are multiple lines in web.config with <httpRuntime maxRequestLength="51200">.
I made this change only in the very first one.
4.IISRESET
5.Removed everything from C:\Users\<userName>\AppData\Local\Microsoft\WebsiteCache from my laptop
6.Removed everything from C:\Users\<userName>\AppData\Roaming\Microsoft\Web Server Extensions\Cache from my laptop
7.Removed everything from C:\Users\USER\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache\ from my laptop
8.IISRESET
9.Restart SharePoint 2013 Designer
Reference:
https://social.msdn.microsoft.com/Forums/en-US/69b184bf-09ed-4e00-815a-4e40a975c4bf/prevent-sharepoint-2010-workflow-to-send-duplicate-emails?forum=sharepointcustomization
Best Regards,
Eric
Eric Tao
TechNet Community Support

Redologs with same sequence

Hi,
I realized weird fact on my oracle 9207. I have dumped cntrl file to trace, moved controlfiles and recreated control file with trace script. No problems, control file was created, database was opened w/o problems. When running brarchive (sap tool for compressing and moving redologs to archive location) I saw that there are 2 redolgos with same sequence number.
from log:
BR0428W File /oracle/SID/archive/1_2.dbf.Z will be overwritten
I did some logswitches (last log sequence was 5),I've stopped DB and did again the same procedure with controlfile. When I recreated controlfile and opened Db, I realized that next redologs are generated not from number 6, but from 4. So again 2 redologs (4 and 5) are with same sequence as previous redologs (already zipped and moved in archive location)....
To prevent overwrite when compressing it with brarchive I've moved those 2 redologs as follows.As you can see fiiles differs in size andI can surely say that those 2 files are not the same, file 1_4.dbf and 1_5.dbf were created twice in oraarch directory in totally different time....Can anyone explain this to me?How it is possible to have redologs files with same sequence? (I did not open DB with resetlogs, it was normal recreation of control file and than simple alter database open). I did test it once again then and same thing occured, again redologs with number 7,8 were created instaed of 9,10 so redologs 7,8 were created twice. There was no shutdown abort or something like this, all done properly with shutdown immediate etc...
867776 Sep 30 09:11 1_5.dbf.Z_1
82012 Sep 30 09:33 1_4.dbf.Z
82007 Sep 30 09:11 1_4.dbf.Z_1
867779 Sep 30 09:33 1_5.dbf.Z
11017 Sep 30 09:56 1_8.dbf.Z
11012 Sep 30 09:33 1_8.dbf.Z_1
11429 Sep 30 09:56 1_7.dbf.Z
11427 Sep 30 09:33 1_7.dbf.Z_1
SQL> @cntrl.sql
ORACLE instance started.
Total System Global Area 1117414432 bytes
Fixed Size 742432 bytes
Variable Size 503316480 bytes
Database Buffers 612032512 bytes
Redo Buffers 1323008 bytes
Control file created.
SQL> alter database open;
Database altered.
Thanks a lot!

Hi,
Sorry someone else was asking if I did resetlogs, so I answered.
Why I created controlfile?- because I had one link in data location, like data1 was directory for datafiles and data2 was just link to data1. So I dumped controlfile and replaced data2 with data1 and removed link on OS level. Anyway, real reason is not so important, next 2 times I did it just for test if my suspicious about redo sequence s right...
below cat from alert log where it is saying that about archiving same sequence of redologs in different times as you can see.thx guys for your help here ;-)
Wed Sep 30 09:18:38 2009
ARC1: Evaluating archive log 11 thread 1 sequence 5
ARC1: Beginning to archive log 11 thread 1 sequence 5
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_5.dbf'
Wed Sep 30 09:18:38 2009
ARC0: Evaluating archive log 11 thread 1 sequence 5
ARC0: Unable to archive log 11 thread 1 sequence 5
Log actively being archived by another process
ARC0: Evaluating archive log 12 thread 1 sequence 6
ARC0: Beginning to archive log 12 thread 1 sequence 6
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_6.dbf'
Wed Sep 30 09:18:38 2009
Dictionary check beginning
Wed Sep 30 09:18:38 2009
ARC0: Completed archiving log 12 thread 1 sequence 6
Wed Sep 30 09:18:38 2009
ARC1: Completed archiving log 11 thread 1 sequence 5
ARC1: Evaluating archive log 13 thread 1 sequence 7
ARC1: Beginning to archive log 13 thread 1 sequence 7
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_7.dbf'
ARC1: Completed archiving log 13 thread 1 sequence 7
Wed Sep 30 09:18:38 2009
Dictionary check complete
Wed Sep 30 09:18:46 2009
ARC1: Beginning to archive log 14 thread 1 sequence 8
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_8.dbf'
ARC1: Completed archiving log 14 thread 1 sequence 8
Completed: CREATE CONTROLFILE REUSE DATABASE "P2A" NORESETLOG
Wed Sep 30 09:37:52 2009
ARC1: Evaluating archive log 13 thread 1 sequence 7
ARC1: Beginning to archive log 13 thread 1 sequence 7
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_7.dbf'
ARC1: Completed archiving log 13 thread 1 sequence 7
ARC1: Evaluating archive log 14 thread 1 sequence 8
ARC1: Beginning to archive log 14 thread 1 sequence 8
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_8.dbf'
ARC1: Completed archiving log 14 thread 1 sequence 8
ARC1: Evaluating archive log 11 thread 1 sequence 9
ARC1: Beginning to archive log 11 thread 1 sequence 9
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/P2A/oraarch/1_9.dbf'
ARC1: Completed archiving log 11 thread 1 sequence 9
Wed Sep 30 09:55:25 2009
alter database open

What project preset do I use? AVCHD and DSLR footage being used in same sequence

I am using a Canon DSLR T3i and Panasonic HC-X920. They can both shoot native 24p which is how I will be recording. When I set up my CS6, what project settings should I use? I want to mix the two sources on the same time line so I'm confused on how to do this because on the sequence settings I can only choose either AVCHD or DSLR. I want to do simultaneous multi-camera editing on the same timeline. So its not like I can set up two different sequences with different settings because I want to be able to cut back and forth within the same sequence while using both cameras. (problem is... two different types of footage ).
Thank you - Mark

Thank you so much for your input. Yes, I should have been more specific when it comes to the frame rate; it is indeed 23.976 for the T3i as well as the Panasonic. I have mixed T3i footage recorded at 23.976fps and then tried to mix in a Canon hf-M41 (avchd) camcorder which records in 60i "supposedly". Although Premiere says it is 29.97 when I bring it into the editor. Anyways when I would mix these two formats it looked like crap. The preset was set up for the DSLR and the hf-M41 played like it was in slow motion even upon rendering and exporting. I would get the red line above my M-41 footage because it didn't match the preset settings. I would then render it thinking it would look right but...nope. I just bought the Panasonic HC-X920 today from BandH, it has a 30 day return policy so I will see how the T3i and Panasonic work together within Premiere. I purchased the Panasonic because the Canon M-41 footage looked so crappy when it was mixed with the T3i in the timeline(because of the different fps and interlacing). I used the Adobe Media Encoder but I got the same results of crappy slow motion jittery footage from the M-41 when I tried to convert it to a 23.976fps .MOV file. Since the Panasonic shoots native 23.976, the two "should" work better together. My only concern is the difference in codecs because the frame rate should be identical. I don't want to get that red render bar when I bring the Panasonic footage into the time that was set up for a DSLR or vice versa. If I do I'm afraid of the obtaing the slow motion effect again. I must have the auto focus from a camcorder when I'm shooting on a jib or other tough moving shots like a steadicam.

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

Different sized clips in the same sequence?

I have footage from various types of cameras with resolutions ranging from 640x480 to 720P in the same sequence.
1. What is the best size to set my sequence? At the size of the largest clip?
2. What else can I do to make the different sized clips work well in the same sequence (with the understanding that 640x480 is low res and poor quality)?
Thanks.

Hi Stanwelks,
1) No, especially since the 640x480 material you have is not of good quality (even if it was you'd lose quality by enlarging the images). Sounds like that converting the HD material to SD could be your best choice especially if you have more standard definition material than HD.
2)Keep it simple. Convert the HD material to DV and work on a DV timeline. This way you can match your sequence settings to one format, making sure you don't get to render all the time and that the lower res material is not going to look any worse.

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

I would like to burn an i-photo album with subtitles to a CD with the photos in the same sequence as they appear in the album and to have the CD work the same on a PC as on the MAC.

I have created several i-photo albums with subtitles and proceeded to burn them to a CD. The CD burned with the correct subtitles, however, the photos did not appear in the same sequence. I tried another method and the photos appeared in the proper sequence, however, my subtitles did not appear as in the albums. Is there a method that I can burn an album to a CD with the photos in the same sequence and with the same subtitles as in the album?
I would also like this CD to work the same on a PC as it does on a MAC.

sorry but files on a CD have no order - filles are simply bits on the disk - the file viewer used to view them determines the order of viewing - for example using the finder on the Mac you can view files in Alpha order, date created order, date modified order, file size order, etc, etc, etc
If you expor tthe files to a desktop folder using the sequetial option then the finder (and probably Windows explorer) would display them in the order you want IF the user views them in alpha order
Bottom line is that you have no control over how the end user views files - that they make
LN

Same Sequence# with different applied value in v$archived_log

Hi everyone,
I have an issue with one of the dataguard servers here.
Basically, looking at the v$managed_standby, it is still applying the latest archived log sequence.
However when I checked for unapplied archived log from v$archived_log, I found at least 1 sequence# which was quite old (around a few days old) not applied.
my query to check this is:
SELECT sequence# from v$archived_log where applied = 'NO';result:
SEQUENCE#
    40154
    40546with a different query I found an interesting result
select sequence#, recid, stamp, status, applied from v$archived_log where sequence# in (40154, 40546);result:
SEQUENCE#      RECID      STAMP S APP
    40154       8093 777156019 D NO
    40154       8095 777156053 D YES
    40546       8486 777673729 D NO
    40546       8487 777673734 D YESAt the time I ran this query, the v$managed_standby are as follow:
select process, status, sequence# from v$managed_standby;result:
PROCESS   STATUS        SEQUENCE#
ARCH      CLOSING           40562
ARCH      CLOSING           40557
MRP0      APPLYING_LOG      40563
RFS       IDLE                  0
RFS       IDLE              40563A simple solution to get those un-applied archived log to be applied is to restart the standby database instance.
Another finding from the production database:
select recid, stamp, sequence#, creator, registrar, standby_dest from v$archived_log where sequence# in (40154, 40546);result:
RECID      STAMP SEQUENCE# CREATOR REGISTR STA
45446 777156011      40154 ARCH    ARCH    NO
45447 777156017      40154 LGWR    LGWR    YES
45450 777156051      40154 ARCH    ARCH    YES
46231 777673709      40546 ARCH    ARCH    NO
46232 777673728      40546 LGWR    LGWR    YES
46233 777673733      40546 ARCH    ARCH    YESThe question is of course, why is this happening?
Can this be prevented?
Thank you,
Adhika

CKPT wrote:
I have an issue with one of the dataguard servers here.
Basically, looking at the v$managed_standby, it is still applying the latest archived log sequence.
However when I checked for unapplied archived log from v$archived_log, I found at least 1 sequence# which was quite old (around a few days old) not applied.
my query to check this is:
SELECT sequence# from v$archived_log where applied = 'NO';result:
SEQUENCE#
40154
40546
Even if old archives applied or not, it will keep transfer the archivelogs from primary. Please confirm that you been executed above query in standby.. is it?Yes I ran it from the standby database
CKPT wrote:
with a different query I found an interesting result
select sequence#, recid, stamp, status, applied from v$archived_log where sequence# in (40154, 40546);result:
SEQUENCE#      RECID      STAMP S APP
40154       8093 777156019 D NO
40154       8095 777156053 D YES
40546       8486 777673729 D NO
40546       8487 777673734 D YES
How many remote/standby destinations you have in your DR setup?
Might this query you have executed in primary, You should always use DEST_ID when executing from primary (or) do check in standby database, Because the applied column you have to check in standby , If you see above the same sequence showing applied in one destination & not applied on other instance, so please do select for dest_2 or in standby.I have only 1 standby destination.
The query above was executed in the standby database server as well as to show that the same sequence# has different result in the applied column.
CKPT wrote:
The question is of course, why is this happening?
Can this be prevented?What is your Online redo log file size (or) how much average archive log file size?
This issue happens when Network glitch while transferring archives from primary to standby RFS , So when is big enough in such conditions it will be in status can be WAIT_FOR_LOG.
BTW, which redo transport you are using? -- recommended to use LGWR
Is there any network problem?
check for exact problem either from primary alert log file or from below query,
SQL> select severity,error_code,message,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') from v$dataguard_status;
SQL> select sequence#, to_char(completion_time,'DD-MON-YYYY HH24:MI:SS') from v$archived_log where sequence# in (40154, 40546);
HTH.The redolog file size is 100MB and so does the archive log file size.
I'm using LGWR ASYNC
these are the result of the query which I modified slightly:
query:
select severity,error_code,message,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') from v$dataguard_status where message like '%40154%' or message like '%40546%';result:
SEVERITY ERROR_CODE MESSAGE                                                                                              TIMESTAMP
Warning           0 LNS: Standby redo logfile selected for thread 1 sequence 40546 for destination LOG_ARCHIVE_DEST_2    11-MAR-2012 20:28:44
Warning           0 ARC1: Standby redo logfile selected for thread 1 sequence 40546 for destination LOG_ARCHIVE_DEST_2   11-MAR-2012 20:28:49The message for the 40154 must have been purged.
It appeared to me that sequence 40546 has been sent twice, by LNS and ARC1.
query:
select sequence#, registrar, creator, standby_dest, dest_id, to_char(completion_time,'DD-MON-YYYY HH24:MI:SS') completion_time from v$archived_log where sequence# in (40154, 40546);result:
SEQUENCE# REGISTR CREATOR STA    DEST_ID COMPLETION_TIME
    40154 ARCH    ARCH    NO           1 05-MAR-2012 20:40:11
    40154 LGWR    LGWR    YES          2 05-MAR-2012 20:40:17
    40154 ARCH    ARCH    YES          2 05-MAR-2012 20:40:51
    40546 ARCH    ARCH    NO           1 11-MAR-2012 20:28:29
    40546 LGWR    LGWR    YES          2 11-MAR-2012 20:28:48
    40546 ARCH    ARCH    YES          2 11-MAR-2012 20:28:53This query proved that the primary database is actually trying to send twice with a different completion time.
Why does the primary database has to send twice?
Thanks for replying,
Adhika

Loading the different result sets in the same sequence for the target table

Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumar

My design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar

Providing F4 help for the same field on selection screen

Hello Experts,
My requirement is :
There are 2 radio buttons and a parameter "p_file" on my selection scree.
1. rb_appl
2. rb_pres
If the radio button rb_appl = 'X', I need to place the logic of F4 help of application server for the field p_file. Else if the rb_pres = 'X', then I need to place the logic of F4 help of presentation server for the same field p_file.
I have written the code in the below manner
PARAMETERS: rb_appl RADIOBUTTON GROUP rad DEFAULT 'X',
                         rb_pres RADIOBUTTON GROUP rad ,
                         p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
      PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
But I am getting the F4 help for only the radio button for which i have placed the default value in the parameters.
So please let me know how to define the F4 help for the same field based on the radio buttons.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

Help on SQL Loader Sequence

Hi all,
I am kind of wondering whether we can give same sequence number to the whole data file.
Explanation:
I need to load a data file into the table, i know how to use the sequence in Sql loader control file. But the problem is i need the same sequence number for every record that is inserted into the table from the Datafile,
Say the datafile has 500 record
and i need all the 500 records to have the same sequence number.
when i load another datafile i need to have a different sequence number for all the records that are inserted into the table.
Thanks in advance.
Edited by: 943254 on Mar 11, 2013 11:08 AM

Then you will have to look for a solution elsewhere - either the file will need to come preseeded with the value, or you will need to perform post-processing on the loaded data to add the constant value, or something else.
HTH
Srini

Inconsistent behavior in TestStand and TestStand UI for the same sequence file

Solved!
Go to Solution.

I tried both the TopLevelVI and testexec.exe; but both of them were giving the same error. I never tried any other UI than Labview.
Because the same sequence was working without any issue on some other system, I uninstalled and reinstalled TestStand 4.0 and same sequence is now working fine, in TestStand, testexec.exe, TopLevelVI – basically everywhere. I am not sure what was wrong with TestStand in my system, but definitely something wasn’t correct.
Thank you for all the responses.
Vidula
Message Edited by Vidula S. on 08-26-2009 10:28 AM

Workflow Help! HD, SD same sequence??

Similar Messages

Maybe you are looking for