Workflow help need urgently in Material Master creation

hi All
I am trying to create a Workflow for creating Material Master views in ECC6 system . Initially Basic data 1 and basic data 2 is created by user and then my workflow is trigerred for subseuqent views .For e.g i need to route the workitem to a user to fiill in Purchasing data and then to another user to fill in accounting data after basic data 1 and basic data 2 is created by so called super user. I was trying to use business object BUS1001006 for this using method CREATEVIEWS but i am getting stuck here with using this method . I dont know how to use this method so that once the user clicks the workitem it should directly go to Puchasing tab view or Accounting tab view (depending on the kind of user currently accessing the workitem).
Any idea how to solve this problem ? It would really be helpful for me
Thanks for your help in advance

1. I have entered transaction OMS9
2. Entered the Field selection group as 2
3. Below the fields option 3 RM03M-WERK280 (Plant) i double clicked and checked there is hide option.
4. I came back selected the T001W - Name1 (Name) I double clicked that in 34 , 35 , 54 was enabled with hide i changed to opt entry but still it seems to be the same.
5. I came back again and below in the field selection tab checked for the MM01 and MM02 transaction as well as fert,halb,roh as opt entry
It did not work.Kindly guide me if there is some other option available for this to revoke the plant option.
Any help would be really appreciatable.
Regards,
Deepak GS

Similar Messages

Help Needed to learn Material Master

Hi MDM Gurus,
I need your help. I have gone through all the MDM toots like console, import manager, data manager and syndicator.
I have assigned a task to work on MDM Material Master. But i have no experience in that.
Please tell where should i start to have a strong base in Material Master. Please post the documents related to Material Master which will be useful. Thanks in Advance.
Regards
Ashok

Ashok,
If you are using MDM 7.1 version refer, SAP Note 1355137
which contains very useful information as attachments:
MDM71_Material_Content.pdf
MDM71_Material_Fieldmapping.zip
MDM71_Material_Content_Strings.zip
If you are on MDM 5.5 version refer, SAP Note 1255401
MDM_Material_Content.pdf
FieldMapping_CheckTables_Material.zip
Kindly go through these SAP Note and attachments as per your MDM Version.
Thanks and Regards,
Mandeep Saini

Help needed with GTS Material Master

Hello Dear Experts,
My probelm is any changes to GTS Material Master lands in the table ZSLO_PRODUCT_TMP ( this is a temporary table created to store material number ), my requirement is only changes to EUACE (Classification Tab) and EU428 (Legal Control tab) should be updated to table zslo_product_tmp.
I tried to find userexits or badis but no luck. any help?
regards.

Hi
Since it is your custom developed table, you need to follow it up with your ABAPer.
Best Regards,
Shiva

BPM Workflow Help Needed Urgently please

Hi All,
We are working on a BPM workflow
User A submits the request which goes to User B for review if rejected by user B the process stops but if approved then the amount is calculated using a decision table and based on the amount it will be routed to the respective users.
I did it till BPM part and created rules in the BRM part as well but dont know how to call this BRM in BPM.
Please help me its very very urgent.
Thanks in advance

Refer step 25 of this document to see how to create a web-service for your BRM ruleset.
Once the web service is ready, it can be imported anywhere for use.
1. In your BPM, right-click on the 'WSDL' folder and select 'Import WSDL'. You can import your BRM web-service here.
2. Then place an automated activity in your BPM process design and set the BRM service as the Service Reference property of the Automated activity.
3. Once this is done, you will see the Condition and Action values of your BRM decision table in the Input and Output mapping of the Automated Activity.
4. Map the values of BPM process context to the BRM condition values in the 'Input Mapping' and get the corresponding output in Output mapping (Action Values of decision table).
Refer step 12 in this document to see how to import a WSDL in your BPM Process.
Hope this helps.

Material Master creation workflow

Hi everyone....
Last week I went on the BIT601 training course and I'm now tryinig to create my first workflow for material master creation, so please forgive my rather noobish questions. I think this must be a common workflow but I'm sure every company has a different process.
My process is as follows:
- User creates basic data view for material master in MM01.
- Workflow is triggered when material is saved.
- Work item arrives in inbox of master data enigneer who completes all material master views.
- Mail is sent to workflow initiator to inform that material is complete.
- End of workflow
I have defined the start event CREATED from business object BUS1001006 in my workflow definition. I have defined a standard task for the first step in my workflow using bus object BUS1001006 with method Create. The workflow starts correctly however ...
My question is how do I get the material number to pull through to my first step? I am assuming I need to setup some binding to pull the material number into the workflow container?
Can someone please point in the right direction.
Many thanks,
Neil

wow, thanks for the super quick reply Rob!
I figured it must be some binding I had not done.
So ... I go to my Start events in my workflow header, I see I have only the "auto-generated" binding i.e. EVTCREATOR > WFINITIAOR ....
now, I see EVTOBJECT as a possible container object from the event side of the window (left hand side) but what do I link it too? I was kinda expecting to see my business object as a possible container object in the workflow side of the screen (right hand side).
I really hope that makes sense... If I understand correctly, the idea is to link the event object to the business object container element ... but if thats the case why can't I see my business object in the workflow side of the binding window?
Many thanks for taking the time to help a noob
[edit] ... I may have partially answered my own question ... I think I need to define the properties of my business object in my workflow container element such that its is an input field? ...
I'm going home now... will carry on with this in the morning.
Edited by: Neil Ward on Oct 4, 2010 6:17 PM

Workflow to approve Material Master creation

Dear all,
I would like to create workflow to approve Material Master creation as below:
When Material is created -> Check & Approval (Yes) -> Material is active
-> Check & Approval (No) -> Material is inactive
How can I do that?
Could you pls help me to solve this?
Thanks,
CH

Hi,
Before designing the workflow, you need to find what is the business object and what is the event which gets triggered when material master is created... you can do that using event trace....
1. SWELS - switch on trace
2. Create material
3. SWEL - check trace to find which event is fired
This will give you business object name..
Now start building workflow using SWDD... Go thru basic steps for designing workflow...

Approval for Material Master Creation !

Dear All ,
My requirement is to have approval process for Material master. is it possible.?
My Client is expecting approval process same like PO ( release strategy )
Is there any standard approval process for every masters which are created as part of MM transactions.
Can it be achieved by means of any workflow.?
Thanks
Jinoy

Hi,
Yes it can be achieved by Work flow & also through the Enterprise Portal development.
If you have Workflow consultant you can take a help in setting up the approval for Material master creation.
If you want high fund & centralization of Material master you can go for EP development but Cost & effort will be on higher side.
Discuss with your Workflow consultant he will help you.
rgds
gsc

Standard Adobe Form for SAP Material Master Creation

Hi,
Did SAP develop standard adobe interactive form for Material Master Creation?
I heard SAP delivered standard forms for Customer Master and Vendor Master. I am not sure about Material Master Form. If any one knows about Adobe Forms for Material Master... please rerply.
Thanks in advance.

Check yourself here:
List of SAP standard Adobe forms: Go to http://service.sap.com/erp (SAP ERP) -> Media Library - SAP ERP Overview -> Detailed information cross ERP -> Adobe Forms for SAP ERP
Standard programs: Standard program for Adobe forms
Regards Otto

HT201210 i have an error of no 11. kindly help, needed urgently

i have an error of no 11. kindly help, needed urgently
when i try to upgrage my
iphone 3gs wit 4.1 to new latest 5.1
it gives the erorr of 11. what that mean? Reply as soon as you can !
thnx

Error -1 may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Some J2ME midlets doubts!! help needed urgently!!!

Hi,
I am currently working in a company where it does wireless technology like WAP and I am assigned a task of creating a screensaver midlet. I have some doubts on the midlets.
1) How do i use a midlet suites? From what I heard from my colleagues & friends, a servlet is needed for midlets to interact with one another. is it true?
2) How do I get the startin midlet to take note the phone is idling so that the screen saver midlet can be called?
Help needed urgently... if there is any source codes for me to refer to would be better... Thanks...
Leonard

indicates that MIDlet suites are isolated (on purpose) from each other, so you can't write over another one's address space.
Also, I believe (at least on cell phones) that you have to specifically enter the Java Apps mode; unless you do the app won't execute. If you are in Java apps mode and a call comes in, the cell's OS puts the Java app currently executing on "Pause" mode and switches back to phone mode.
Not sure if you will be able to have a Java app do that automatically.
BTW why do you need a screensaver on an LCD display? Is it really intended to show an advertisement?
Download and real all the docs you can from Sun, once you get over the generic Java deficiencies MIDlet's aren't that hard.

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

The startup disk may need repairing.
Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

Defaulting values in material master creation

Hi,
I want to have some filed values to be appeared as default in all the views while creation of material master.
By user settings, I can restrict Org level values such as C Code,S Org Distribution Channel etc etc.
But how to make field values such as account assignment grop,division,valuation class,price control,transport grp,loading grp etc appearing default so that user does not have to think.
Regards,
manOO

Hi,
You can set values for Parameter IDs of the fields that you want to default.
Set values in system -> user profile -> own data under parameters tab.
For example Disision's parameter id is 'SPA'. You can set a default value for division by giving proper value for SPA under parameters data in own data.
Hope this will help.
Regards,
Naveen.

Automatic activation of batch during material master creation

Dear All
Is it possible to activate batch management in material master while creation. This is required for specific material type and field MARA-XCHPF should be set automatically.
Thanks in advance
Regards
Yogesh

Dear,
In OMS9 field for batch management MARC-XCHPF
first check which field selection key is assigned to your material type in the filed slection group 212 (OMSR) there is field called MARA-XCHPF, and MARC-XCHPF.
couble click on these fields and there is an indicator " prapose field content" , you need to select that indicator.
Regards,
R.Brahmankar

Need to upload material master.

Hi experts,
I am periodically required to change values in some fields from MRP 1,2,3 and 4 views. It takes hell of a time as there are many material codes..nearly 500 every month.
My question is is there any other quick input method like creating an excel file for that data and upload it?
I remember in mylast company for uploading material master the consultants provided us with that kind of query/data run.
Regards,
Sam

Dear ,
You need to run BDC in Back ground for uploading Material Master parametrs or new material creation .It can be Batch process.
Or Goto T-code MM17 mass change check tables there, and retreive data one by one from se16, then merge your file. or develop report detailed report for this then download.
Look up the following therads which is self explaintaory :
http://wiki.sdn.sap.com/wiki/display/ABAP/MaterialMasterUpload+Program
http://wiki.sdn.sap.com/wiki/display/Snippets/BDCProgramtoUploadMaterialMasterData+(MM01)
http://www.sap-img.com/abap/upload-material-master-finish-goods.htm
Just discuss with your ABAPer and provide him the Excell sheet with necessary parametrs .
Regards
JH
Edited by: Jiaul Haque on Oct 11, 2010 3:29 PM

Material master creation error through LSMW

Hi,
I have a problem with creation material master through LSMW with object type BAPI. I use below import methods
Business Object BUS1001006
Method                SAVEDATA
Message Type    MATMAS_BAPI
Basic Type          MATMAS_BAPI03
Material number is configured length of 12 with leading zeros.
In my text file material number is given as XXXXXXXXXXX which is 11 digits. When I start IDoc processing it issues an error message u201CMG019 the numeric material number & was transferred without leading zerosu201D.
Then I add 0 to material number in the file (it becomes 0XXXXXXXXXXX) and run IDOC processing it issues same error message again.
How I can resolve this issue?
Thanks

Hi,
Please check the below link...
Re: Creating new material using i/b MATMAS IDOC
and also check the OSS note 707602.
Hope it may help you.
Kuber
Edited by: kuberk on Aug 14, 2011 4:00 AM

Workflow help need urgently in Material Master creation

Similar Messages

Maybe you are looking for