Workflow in Solution Manager for approval and notification

hi@ll
i want to know if there is a function or customizing feature for implmenting these two kinds of workflows in the solman:
-for notification: if the status value of a document in the SOLAR01/02 will change, can automatocalliy be sent an email?
-for approval: ChaRM?
thank you
Marco

Hi Marco,
In answer to the first question, for SOLAR01/02, no standard setting is available. It's got to be custom built, if the project budget allows
As of SolMan 7.0 Enterprise Edition, it seems there are some preconfigured Workflows.
I am hopeful that they are talking of what you seem to want. Please check page 9 of 14 of [this|https://websmp208.sap-ag.de/~sapidb/011000358700000225832008E.pdf] document.
If your client is on 'SAP Enterprise Support', you are entitled to get SolMan Enterprise Edition !
Best regards,
Srini

Similar Messages

  • Can we create a workflow in Solution Manager for Tester Worklist ?

    Hi Friends,
    Actually I have a requirement to create a workflow in solution manager.
    The requirement is to create a workflow for issue log(tester worklist). As soon as a new issue (support message) is created then the wf should get triggered and send out a mail to the resp. person. It just a sending a mail between issue creater and responsible person.
    Can anyone please let me know if we create a wf in Solman or not ? If so please provide me some related buss. obj for that. thanks
    Is there any standard workflow (or similar to that) to make it automatic ? Once the message is created then a mail to the responsible person should go.
    Grateful to your help.
    Srithan

    Sorry Raguraman,
       I am unable to check those tcodes as I havenot got the authorizations for those. after several mails I got some basic wf developer tcode access. I am not sure whether I have to create a new workflow for this or I can go with some built-in technology to send mail when a new message (tcode: stwb_work) is created.
    can raguraman or anyone please help me on doing this ?
    if the solman has provided the standard for sending mails when a new message is created/changed to the responsible person.
    grateful for your help
    Regards,
    srithan

  • Is there a workflow for approval and Reversal of Regular Journal

    Hi All,
    Is there a workflow for approval and Reversal of Regular Journal .
    can we use  the standard park document workflow for the same .. ???
    Thanks ,
    Naval

    For such activities you would probably better make use of ISR.
    See [SAP Help - Internal Service Request|http://help.sap.com/saphelp_erp60_sp/helpdata/en/53/3120386827c23ce10000009b38f842/frameset.htm]

  • Can we create a workflow in Solution Manager ?

    Hi Friends,
    Actually I have a requirement to create a workflow in solution manager.
    The requirement is to create a wf for issue log. As soon as a new <b>issue (support message)</b> is created then the wf should get triggered and send out a mail to the resp. person. It just a sending a mail between issue created and responsible person. Can anyone please let me know if we create a wf in Solman or not ? <b>If so please provide me some related buss. obj for that.</b> thanks
    Grateful to your help.
    Srithan

    If you want to Place certain actions after status change of a transaction, it's better to do this with an action profile and a condition for that action:
    In Solman check SPRO path:
    CRM>Transactions>Basic settings-->Define transaction types
    In this activity double click the transaction type to find out what the action profile is:
    Now go to:
    CRM>Basic functions>Actions>Actions in transactions>Change actions and conditions-->Define action profiles and actions
    Here you can add an action definition on the action profile, this can be methods, workflow or in your case a smartform mail.
    If the action profile is a SAP standard (doesn't begin with Z) it is advisable to copy the standard. Also, this is more of a CRM/Solman consultant issue, so you may have to involve such a consultant
    Now go to
    CRM>Basic functions>Actions>Actions in transactions>Change actions and conditions-->Define Conditions
    Here you can add conditions which will cause the action to be executed.
    Kind regards, Rob Dielemans

  • I am not using condition for Approval and Rejection.

    Hi Balaji,
    I am not using condition for Approval and Rejection.
    I am using Decision.
    I am not able to find the error.Rejection is going on Successfully.
    I am to rectify this error from past 4 days.
    Can you give the solution.
    Regards,
    Chow.

    Hi chow,
    What is the condition that u are using the Condition Statement.
    Please check the status returned from the Approval Process, by analyzing the Workflow Log for the particular step.
    Think there is a problem with the condition statement.
    Regards,
    Raj

  • Questions on "FAQ - SAP Solution Manager for VARs"

    Hi,
    I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
    For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
    But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
    For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
    According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
    With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
    All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
    Sorry for this long text.. hope you have some helpful ideas!
    Regards,
    Richard

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • How to configure CTS+ for Solution Manager for XI 3.0

    Hi ,
    We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
    Question:
    1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
    If Yes .. How?   If No... Why?
    2. Is there any way to make the the transport automated like ABAP tranports.
    If there is.... Please send the link or documents..
    Thanks
    Manoj

    Hi Venkat,
    Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
    We have Solution Manager 7.1 setup in place.
    Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects  across  the XI landscape.
    Regards,
    Manoj

  • Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes.  I have downloaded new Extension Manager for CS5. and still c

    Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes.  I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]

    Hi bigd_bud,
    Can you see if the solutions in this post help?
    Re: Adobe Extension Manager crashes on mac 10.8
    Thanks,
    Preran

  • FAQ - SAP Solution Manager for VARs

    You can find further technical questions around configuration & functionalities in a comprehensive
    FAQ to SAP Solution Manager for VARs.
    This FAQ covers questions and answers around:
        > SAP Solution Manager, enterprise edition
        > SAP Solution Manager VAR setup: configuration of Service Desk
        > Work Center Service Desk: functions & configuration
        > Work Center System Monitoring: setup of SAP EarlyWatch Alert
    You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
    Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
    Please notice: The FAQ will be updated from time to time.
    Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
    Edited by: Susanne Schlehf on May 18, 2009 12:56 PM

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • Monitoring EWA in solution manager for EP

    Hi
    How to monitor and configure the EP 7.0 on solution manager 7.0 for SP 16
    Can any body give the doc and steps to do.
    Regards

    Hi,
    Follow Guides
    Setting Up your Central Monitoring [original link is broken]
    Notes
    987835 - How to define Solutions in SMSY for Diagnostics
    976054 - Availability of EWA for Non ABAP components
    Prerequisites
    The SAP EarlyWatch Alert is available for:
    SAP systems based on ABAP stack of SAP Netweaver or SAP WebAS
    SAP R/3 (minimum release 3.1H)
    The Java stack of SAP Netweaver components with a J2EE Engine 6.40 or above (requires ST-SER 700 2007 1 or above on the Solution Manager)
    The main prerequisites for using SAP EarlyWatch Alert are:
    A remote connection between your SAP component and your SAP Solution Manager
    On a ABAP stack system implement SAP Note 69455, run report RTCCTOOL and follow instructions.
    For a Java stack system or a CRM system: setup of Solution Manager Diagnostics. For Java SAP Note 976054 describes the prerequisites.
    The EarlyWatch Alert content is shipped on the Solution Manager with software component ST-SER u2018SAP Solution Manager Service Toolsu2019 and on the satelite systems (ABAP) with software components ST-PI u2018SAP Solution Tools Plug-Inu2019 and ST/A-PI u2018Application Servicetoolsu2019.
    Chk Pdf
    https://websmp201.sap-ag.de/~sapidb/011000358700002009362008E.pdf
    /people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
    Hope it solves ur problem
    Regards
    Prakhar

  • One Solution Manager for different customers

    Hi Guys!!
    I am configuring a Solution Manager for different customers wich have a different S-users and different users to manage the solution manager system.
    My problem is that there is only one SAP-OSS RFC destination where I can fill the data only for one of the S-users. From "solution_manager" transaction you can indicate the S-user too (Edit - Global Settings) but the same problem occurs, I can fill the gap only with one S-user and I have to change this one when I want to work with different S-user.
    Can i configure the system to indicate different S-users depens on the user who I use to logon to solution manager system?
    Thank you very much in advanced,
    Edorta.

    Hi Edorta,
    you did not mention, which scenarios do you plan to use.
    Functionality to use the SolMan for many customer numbers is already available or will be added in future Support Package Stacks.
    It has been already added for
    - Maintenance Optimizer
    Note 1021275 - Maintenance Optimizer: RFC Destinations for Partners
    - Forwarding SAP Messages (with different S-Users resp. customers)
    IMG: Solution Manager -> Scenario-Specific Settings -> Service Desk -> Value Added Reseller
    Check for SAP Notes on component SV-SMG* with key word "VAR" (as Valued Added Reseller), "Service Provider"
    Best regards,
    Ruediger Stoecker
    SAP Notes added
    Message was edited by: Ruediger Stoecker

  • Is it a must to use Solution manager for ECC 6.0 upgrade

    Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

    Hi,
    I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4. 
    I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
    Any docs out there for this?
    Thanks!
    I figured it out... i had to add the R/3 Enterprise logical components to my system landscape.  After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
    Never mind!
    Edited by: Tom Janes on Sep 9, 2009 12:52 AM

  • Solution Manager for SAP BI

    I have to use solution manager for an SAP BI/BW implementation. The BW client is currently in SAPERP 2005 (ECC 6.0). Is is possible to use solution manager in the same system or should the BI/BW be implemented in NetWeaver for implementing solution manager.
    Thanks,
    Neha.

    Hi Neha,
    I am not sure, whether I understand your question correctly.
    - SAP ERP 2005 (ECC 6.0) and SAP Solution Manager 4.0 are separate installations, each will get their own system id.
    They might share the same hardware, depending on your hardware capacity.
    Best regards,
    Ruediger

  • Solution Manager for SAP BI/BW

    I have to use solution manager for an SAP BI/BW implementation. The BW client is currently in SAPERP 2005 (ECC 6.0). Is is possible to use solution manager in the same system or should the BI/BW be implemented in NetWeaver for implementing solution manager.
    Thanks,
    Neha.

    Hi Neha,
    I am not sure, whether I understand your question correctly.
    - SAP ERP 2005 (ECC 6.0) and SAP Solution Manager 4.0 are separate installations, each will get their own system id.
    They might share the same hardware, depending on your hardware capacity.
    Best regards,
    Ruediger

  • Solution Manager for EWA

    I already configured my EWA (SDCCN), but then I realize that EWA need Solution Manager to run.
    I need to know how to install Solution Manager for my EWA? Do I need to install in separate server? Or there are others option for me to consider?
    Pls help me to figure this out…

    Hello Hazha!
    I don't know how you can configure in SDCCN an EWA session without the Solution Manager, but if you did so, you can send your EWA data to sap, where they will be processed and where you can find them in your inbox.
    You need a well functioning SAPOSS RFC destination (TA OSS1).
    SDCCN -> Goto -> Settings -> Task Specific
    You will get a window with a tree list. Open RFC-Destinations -> Settings and click on the settings icon.
    In Dialog RFC destinations, Tab Destinations you might click on the Info-Icon (botton) and you will get documentation. Click now on the Change Icon.
    You will now get a new icon "Create destination to SAP OSS". Please use it, it should generate the destination SDCC_OSS.
    Please test the destination.
    Now you can insert this RFC-destination into the task attributes of your EWA-Session, system-id should be O01.
    Bye
    PS.
    You might also have a look at the documentation at http://service.sap.com/ewa -> Media Library
    Message was edited by: Riccardo Escher

Maybe you are looking for