Workflow inbox level given message Error in event receiver .

hi guys,
workflow standard purchase order copy to custom and create to purchase order event will be triggered successfully.but inbox level this errors has come but not display the purchaser order please help to me:
Error in event receiver
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS90000015
Following error occurred:
SWF_RUN 594
Thanks&Regards,
Bikshapathi.

Hi BP,
are you using any rule in your WF?
check if binding is proper,
check if you passing PO parameters properlty, as ReleaseCode would be a mandatory field in your WF/task container.
Hope it helps.
Aditya

Similar Messages

Error in event receiver

Hi Friends, mails from SAP are sent to HR users from WF-BATCH.The users are unaware why the message have been sent.
The message that is being sent is given below:
Messages received from: Batch WF-BATCH
Subject: Error in event receiver
Body of message:
Error processing following event linkage:
KNA1 STATUSCHANGE WORKITEM
Following error occurred:
WL 605
000003807054
Message text:
Work item 000003807054 locked by user (enqueue error)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).
Kindly help.

Hi,
Please refer the link [Workflow System Administrator Role|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/8c/1923ce932b11d2a5ea0060087a79ea/content.htm] - The administrator needs to be assigned with these roles mentioned in this hellp documentation.
The error message in your case indicates that there is some problem in the "Event Linkage". KNA1 is the Customer Master Table. I guess it is the "STATUSCHAGED" event of Customer Object is having some event linkage problem. You can check the event type linkages in SWETYPV Transaction. Thanks.
Regards
Suresh

Error in event receiver in workflow for PO release strategy

Hi Expert,
I am trying to trigger an email through workflow for PO release. I have setup following
In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
In PFTC, under Triggering events, Object type BUS2012 is green light
When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

laurarice wrote:
Hi Expert,
>
> I am trying to trigger an email through workflow for PO release. I have setup following
>
> In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
> In PFTC, under Triggering events, Object type BUS2012 is green light
> When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
> Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

Error in event receiver Archivelink Service Pack 20

We implemented Archive link 3 years ago and for the first year, I was constantly bombarded with enqueue errors from background steps that attach images to documents. The images were always attached fine so these were just a nuisance.
At some point, a service pack must have fixed this because they just stopped happening two years ago.
Over the weekend, we upgraded to SP 22 and now the enqueue error are back with a vengeance =(
I get 40-50 of these per day now and it's blowing up my SBWP inbox:
Error processing following event linkage:
IMAGE ASSIGNED WORKITEM
Following error occurred:
WL 605
000003975171
VIC17629
Message text:
Work item 000003975171 locked by user VIC17629 (enqueue error)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).

Check with some OSS notes.
Thanks
Arghadip

Want to fire event receiver before workflow is execute while adding File in Document Library.

Hi,
I have Event receiver and workflow attached to same Document
Library.
Is it possible to fire event receiver before Workflow is
executed ?
Regards,
Milind

Hi,
According to your description, my understanding is that you want fire event receiver before workflow is excuted.
If the workflow for a list is set to auto-start, it will always execute before event receiver by default.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/3147/execution-order-of-event-receivers-and-workflow-on-a-list
As a workaround, you can set the workflow start by manually. Then , after executing the event receiver, you can start workflow using code at the end of event receiver.
Here is a demo for your reference:
http://zimmergren.net/technical/starting-a-sharepoint-workflow-from-code-event-receiver
More information about start workflow using C#:
http://jainnitin2411.wordpress.com/2012/07/06/programmaticallystartsharepointworkflow/
Best regards,
Zhengyu Guo
Zhengyu Guo
TechNet Community Support

Weird User error - Items disappear from Workflow inbox when refreshed

Hi All,
One of our end users gets this error -
He logs into business workplace, and clicks on one of the items and exits without doing anything - on refresh the item vanishes from his workflow inbox - not visible in any sub folders or Outbox (Work items exceuted by me).
Same thing occurs when he clicks on the "Reserve" or "Replace" icons for an item and does a Refresh. The item disappears from Inbox.
Tried to swtich off the Preview pane and refresh - same occurence.
Tried to refresh / reserve from another computer and the same thing occurs.
Is this a problem with the GUI / user profile?
Any pointers highly appreciated.
Rgds,
Rahul Kochhar ([email protected])

Rahul,
Welcome to SDN Forums!!
Is the user in question a selected agent for the work item(s)? Does this happen only for a specific user? If so, it could be an authorization issue. Check for any failed authorizations (SU53) for the user. What is the status of the WI when it disappears from the inbox? If in error, check for error messages in the technical display of the WF log.
Cheers,
Ramki Maley.
Please reward points if the answer is helpful.
For info on awarding points click on this link: https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm

Some of the error idocs are not falling into Workflow Inbox

The extract of IDOC list with status 51 from WE02 transaction is not matching with Workflow inbox column "object", some of the idocs which are errored are not showing in the workflow inbox. Here we are in need to get all the errored idocs into the inbox. Please suggest me to proceed further.

Hi Smita,
Thanks for your reply.
I have maintained the suggested role SAP_GRC_SPC_SCHEDULER in backend for an user id and i can able to see a job is getting completed in SM37.
However, the task in the inbox hasnt come yet.Any idea you may have as to how much time it will take for task to come into inbox.Or is that i need to do any more extra task.
Please advice.
Thanks
Ashok S

How to get Status of a given message (ID) from OS level?

Is there a way to get the status of a given Message id using any command from the OS (UNIX or NT) where the XI is installed?
We are currently using XI 2.0 on NT.
Thanks.

have a look at the workflow built-in vars:
WF_ACTION_ERROR and WF_ACTION_RESULT or WF_CASE_RESULT
WilfredS

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21:     </httpHandlers>
Line 22:     <authentication mode="Forms">
Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24:     </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

Workflow manager Service Bus 407 error

After installing and configuring Workflow Manager on SharePoint 2013 farm I am able to create workflows in SP Designer in 2013 and publish them on the server with no errors. New workflows do show up in the application, but will not run. I found
the indication in ULS that something went wrong
Workflow revision number mismatch! Current workflow store revision is 13 and workflow host scope has revision 0
Operational event viewer logs on the Workflow Manager Host showing up these events:
Log Name: Microsoft-Workflow/Operational
Source: Microsoft-Workflow
Date: 5/2/2014 2:00:31 PM
Event ID: 22
Task Category: (65512)
Level: Warning
Keywords: Dispatcher,Management
User: domain\user
Computer: FQDN
Description:
Service Bus exception swallowed at location ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.HandleException. System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://fqdn:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: ''. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security token while accessing 'https://FQDN:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: ''. ---> System.Net.WebException: The remote server returned an error: (407) Proxy Authentication Required.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken)
at Microsoft.ServiceBus.Messaging.Sbmp.AcceptMessageSessionForNamespaceAsyncResult..ctor(SbmpMessagingFactory messagingFactory, ReceiveMode receiveMode, Int32 prefetchCount, CreateControlLinkSettings controlLinkSettings, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessagingFactory.OnBeginAcceptMessageSession(ReceiveMode receiveMode, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.MessagingFactory.AcceptMessageSessionAsyncResult.<GetAsyncSteps>b__29(AcceptMessageSessionAsyncResult thisPtr, TimeSpan t, AsyncCallback c, Object s)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Dispatcher.ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.EndAsyncResult(IAsyncResult result)
at Microsoft.Workflow.Common.BackoffRetryAsyncResult.IsolateWithRetry(IAsyncResult result)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Workflow" Guid="{B2885F6E-231C-43FF-BBEA-7516148FF6FE}" />
<EventID>22</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>65512</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000210</Keywords>
<TimeCreated SystemTime="2014-05-02T18:00:31.600519200Z" />
<EventRecordID>323735</EventRecordID>
<Correlation ActivityID="{C756E6D1-A7DC-4DA5-BA9D-D38DFD199CBC}" />
<Execution ProcessID="4084" ThreadID="4112" />
<Channel>Microsoft-Workflow/Operational</Channel>
<Computer>FQDN</Computer>
<Security UserID="S-1-5-21-436374069-1326574676-725345543-5309" />
</System>
<EventData>
<Data Name="location">ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.HandleException</Data>
<Data Name="exception">System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://********************:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: ''. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security token while accessing 'https://****************:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: ''. ---> System.Net.WebException: The remote server returned an error: (407) Proxy Authentication Required.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken)
at Microsoft.ServiceBus.Messaging.Sbmp.AcceptMessageSessionForNamespaceAsyncResult..ctor(SbmpMessagingFactory messagingFactory, ReceiveMode receiveMode, Int32 prefetchCount, CreateControlLinkSettings controlLinkSettings, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessagingFactory.OnBeginAcceptMessageSession(ReceiveMode receiveMode, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.MessagingFactory.AcceptMessageSessionAsyncResult.<GetAsyncSteps>b__29(AcceptMessageSessionAsyncResult thisPtr, TimeSpan t, AsyncCallback c, Object s)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Dispatcher.ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.EndAsyncResult(IAsyncResult result)
at Microsoft.Workflow.Common.BackoffRetryAsyncResult.IsolateWithRetry(IAsyncResult result)</Data>
</EventData>
</Event>
no proxy is configured on the system and gateway address is accurate.

are you accessing the site from your local machine or on the server? also could you please tell us if your sharepoint server and Client
are on same domain. Looks Like Token services having the issue.
As i saw you are using the SSL, check the below post may help.
http://social.technet.microsoft.com/wiki/contents/articles/13708.installing-workflow-manager-failed-with-could-not-establish-trust-relationship-for-the-ssltls-secure-channel.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error in event simulation

Hi..
I've configured the workflow for FI Document Parking/Posting (for the BO FIPP). I'm using the standard WF WS10000051(having no customization) and its sub workflows. But when I perform an event simulation for FIPP CREATED in SWU0, I'm getting the error ...."The binding definition from the event container to the workflow
container or the task container contains errors.".... for the tasks WS10000051 and WS10000053.
I've also done a syntax check for WS10000051 and WS10000053 in SWDD, and there are no inconsistencies.
Any advice/hints on solving the aforesaid error is greatly appreciated.
Thanks in advance
PI

Dear Akshay...
   All the event linkages have been activated in OOCU....also for the WF WS10000051(3 level parking) the events FIPP.CREATED,FIPP.CHANGED & FIPP.COMPLETED as the triggering events and for the WF WS10000051 the events are FIPP.CREATED & FIPP.CHANGED.... binding exists for all these....the mapping from event container to WF container for both the WFs is as follows...
<b>Event Container</b><----
><b>WF Container</b>
&_EVT_OBJECT&     <----
> &FIPPID&
&_EVT_CREATOR&    <----
> &_WF_INITIATOR&
These being the standard settings....also a check for any binding errors yields 'No Errors Found'...
Your advice is greatly appreciated...
Thanks and Regards
PI

VSS snapshot of 1.1TB is ending after few hours with timeout. No errors in event log

Hello,
does someone have experienced issue where starting making snapshot (forum GUI or command line) is taking a lot of time and then it just ends with timeout?
I have scenario on virtualised Windows Web Server 2008 R2 where backup is being made by Idera Backup Software but since it relies on VSS Snapshots then we can just skip this point because making snapshots from directly Windows command line or drive preferences/GUI
is ending with timeout for this single drive after few hours. Affected system has 3 drives: C - 95GB, D-1.06TB and E-120GB. C and E can be backuped correctly and only drive D has problems. System is updated with latest drivers vssadmin for writers returns
list without any errors and snapshot for drive D which ends with timeout is not generating any error in event log. I wanted to configure VSS trace like it is being instructed on this site:
http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.tshoot.doc%2Ft_pdg_traceprfrm.html
but I don't see any trace.txt file on given location. If I remove drive D from backup process it ends without errors. System was restarted many times. Only thing which is visible in windows Event log (application part) is that "The VSS service is shutting
down due to idle timeout." about 4 hours after snapshot making proces is starting.
I've contacted Idera backup about this but they can't help too much if Windows snapshot process is failing. They suggested that something can be wrong with this drive but since this is virtualised machine and all of my VM are being stored on RAID10 disk
array connected to my server using fiber connections then I don't think that this is hardware issue (especially when other two drives are located on the same LUN on disk array).
Any suggestions?
Regards

Hi,
Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure.
2. The I/O in D drive is heavy and make the shadow copy I/O failed.
3. Server is too busy to handle the request.
4. The disk is heavily defragment.
Please refer to the articles to troubleshoot the issue:
Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
http://support.microsoft.com/kb/826936/en-us
VSS timeouts during backup? What could contribute to that?
https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in Event Binding for Table UI element

Hi,
I had created a table UI element in my web dynpro component and it worked fine. After a few weeks, while I was making some other changes in the same module and did a syntax check on the component, I got this error "The event binding for element "TBL_ABC" contains errors". There is a "Correct errors" button given along with this error message, which removes the error. But I just wanted to know what is the reason for this error.
Regards,
Akshatha.

Hi,
Please check for the cardinality of the node which you are using to bind for the TABLE UI element.
I think the cardinality should be either 1:N or 0:N.
Give it a try.
Regards,
Lekha

Workflow Manager Cumulative Update (February) error

Hi,
I've downloaded and installed
Workflow Manager 1.0 Cumulative Update and
Service Bus 1.0 Cumulative Update. But after installing the updates, I can't access the Library workflow settings page. I'm getting unexpected error. Then after investigating the workflow manager log in event viewer, I've found the following error messages:
The asynchronous operation has completed with an exception. Exception message is: System.Data.SqlClient.SqlException (0x80131904): The EXECUTE permission was denied on the object 'InsertTrackingAndStatus', database 'DEV_WFInstanceManagementDB', schema 'dbo'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.CompleteAsyncExecuteReader()
   at System.Data.SqlClient.SqlCommand.EndExecuteNonQueryInternal(IAsyncResult asyncResult)
   at System.Data.SqlClient.SqlCommand.EndExecuteNonQuery(IAsyncResult asyncResult)
   at Microsoft.Workflow.Management.ExecuteNonQueryAsyncResult.OnEndExecuteSql(IAsyncResult result)
   at Microsoft.Workflow.Management.ExecuteSqlAsyncResult.EndAsyncResult(IAsyncResult result)
   at Microsoft.Workflow.Common.BackoffRetryAsyncResult.IsolateWithRetry(IAsyncResult result)
   at Microsoft.Workflow.Common.AsyncResult.AsyncCompletionWrapperCallback(IAsyncResult result)
ClientConnectionId:2f93882a-8d4c-440d-a3ff-0bd9d1682ad2.
The issue I've found in my Dev environment with Windows Server 2008 R2 SP 1. This is standalone SharePoint farm with DC, SQL Server and SharePoint all installed in the same server. One workaround I have found that if I add the WF user as dbo to the database
as well as 'WFServiceOperators' then the error disappear.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

I ran the provided SQL script on our Workflow Manager databases. I commented out the EXEC line and added a 'PRINT @Cmd'. This allowed me to view the actual commands the script would execute. These commands were generated:
GRANT EXECUTE ON [AddDbUserToRole] TO [WFServiceOperators]
GRANT EXECUTE ON [AddLoginAndUser] TO [WFServiceOperators]
GRANT EXECUTE ON [AddUserToServiceAdmins] TO [WFServiceOperators]
GRANT EXECUTE ON [AddUserToServiceOperators] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[DebugTraceRecordValues] TO [WFServiceOperators]
GRANT EXECUTE ON [DeleteExpiredInstances] TO [WFServiceOperators]
GRANT EXECUTE ON [DeleteInstances] TO [WFServiceOperators]
GRANT EXECUTE ON [DeleteInstancesByScopeId] TO [WFServiceOperators]
GRANT EXECUTE ON [DeleteSystemInstances] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[EntityIds] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[EntityNames] TO [WFServiceOperators]
GRANT EXECUTE ON [FormatNTGroupName] TO [WFServiceOperators]
GRANT EXECUTE ON [GetDebugTraces] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceCount] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceDebugTraces] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceDebugTracesByWorkflowId] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceMetadata] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstances] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstancesById] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstancesByWorkflowId] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceStatusHistory] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceStatusHistoryRecordsByWorkflowId] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstancesToRestore] TO [WFServiceOperators]
GRANT EXECUTE ON [GetInstanceTelemetryData] TO [WFServiceOperators]
GRANT EXECUTE ON [GetMappedVariables] TO [WFServiceOperators]
GRANT EXECUTE ON [GetStatusHistory] TO [WFServiceOperators]
GRANT EXECUTE ON [GetStillReferencedWorkflows] TO [WFServiceOperators]
GRANT EXECUTE ON [GetStoreVersion] TO [WFServiceOperators]
GRANT EXECUTE ON [GetSystemInstances] TO [WFServiceOperators]
GRANT EXECUTE ON [GetUpdatedInstances] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[Guids] TO [WFServiceOperators]
GRANT EXECUTE ON [HasPermissionToPerform] TO [WFServiceOperators]
GRANT EXECUTE ON [InsertInstanceDebugTraceRecords] TO [WFServiceOperators]
GRANT EXECUTE ON [InsertInstanceStatusHistoryRecords] TO [WFServiceOperators]
GRANT EXECUTE ON [InsertNotStartedInstanceRecord] TO [WFServiceOperators]
GRANT EXECUTE ON [InsertTrackingAndStatus] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[InstanceStatusValues] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[MetadataValues] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[MetadataValuesWithInstanceId] TO [WFServiceOperators]
GRANT EXECUTE ON [OnInstanceEndedWithStatusDetail] TO [WFServiceOperators]
GRANT EXECUTE ON [OverrideTrackingAndStatus] TO [WFServiceOperators]
GRANT EXECUTE ON [ResetInstancesToNotStarted] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[StatusHistoryRecordValues] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[TrackingRecordValues] TO [WFServiceOperators]
GRANT EXECUTE ON [UpdateInstanceWorkflowStatus] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[Variables] TO [WFServiceOperators]
GRANT CONTROL, REFERENCES ON TYPE::[WorkflowIds] TO [WFServiceOperators]
I ran the script against both 'WFInstanceManagementDB' and 'WFResourceManagementDB'. I also ran it against 'WFManagementDB', but the script didn't generate any GRANT commands for that database.
So I enabled the EXEC command and reran the script against both databases. Almost immediately I could see a drop in CPU utilization on our workflow server. Also the errors disappeared from the Event Log. To be safe I also rebooted the server.
This seems to have fixed our problem. I'd still like to have an official KB article or update for this problem, though.

Workflow inbox level given message Error in event receiver .

Similar Messages

Maybe you are looking for